[lfs-fr] r6727 - in trunk/blfs: . archive general/genlib general/genutils general/prog general/sysutils multimedia/videoutils networking/netprogs networking/netutils postlfs/security pst/printing pst/typesetting server/databases server/major traduc/commits x/installing x/lib xsoft/graphweb xsoft/other

myou72 at orange.fr myou72 at orange.fr
Dim 18 Jan 12:30:47 PST 2015


Author: myou72
Date: 2015-01-18 12:30:47 -0800 (Sun, 18 Jan 2015)
New Revision: 6727

Added:
   trunk/blfs/archive/texlive-source-full.xml
   trunk/blfs/pst/typesetting/xindy.xml
   trunk/blfs/traduc/commits/r15322.txt
   trunk/blfs/traduc/commits/r15323.txt
   trunk/blfs/traduc/commits/r15324.txt
   trunk/blfs/traduc/commits/r15325.txt
   trunk/blfs/traduc/commits/r15326.txt
   trunk/blfs/traduc/commits/r15327.txt
   trunk/blfs/traduc/commits/r15328.txt
   trunk/blfs/traduc/commits/r15329.txt
   trunk/blfs/traduc/commits/r15330.txt
   trunk/blfs/traduc/commits/r15331.txt
   trunk/blfs/traduc/commits/r15332.txt
   trunk/blfs/traduc/commits/r15333.txt
   trunk/blfs/traduc/commits/r15334.txt
   trunk/blfs/traduc/commits/r15335.txt
   trunk/blfs/traduc/commits/r15336.txt
   trunk/blfs/traduc/commits/r15337.txt
   trunk/blfs/traduc/commits/r15338.txt
   trunk/blfs/traduc/commits/r15339.txt
   trunk/blfs/traduc/commits/r15340.txt
   trunk/blfs/traduc/commits/r15341.txt
   trunk/blfs/traduc/commits/r15342.txt
   trunk/blfs/traduc/commits/r15343.txt
   trunk/blfs/traduc/commits/r15344.txt
   trunk/blfs/traduc/commits/r15345.txt
   trunk/blfs/traduc/commits/r15346.txt
   trunk/blfs/traduc/commits/r15347.txt
   trunk/blfs/traduc/commits/r15348.txt
   trunk/blfs/traduc/commits/r15349.txt
   trunk/blfs/traduc/commits/r15350.txt
   trunk/blfs/traduc/commits/r15351.txt
   trunk/blfs/traduc/commits/r15352.txt
   trunk/blfs/traduc/commits/r15353.txt
   trunk/blfs/traduc/commits/r15354.txt
   trunk/blfs/traduc/commits/r15355.txt
   trunk/blfs/traduc/commits/r15356.txt
   trunk/blfs/traduc/commits/r15357.txt
   trunk/blfs/traduc/commits/r15358.txt
   trunk/blfs/traduc/commits/r15359.txt
   trunk/blfs/traduc/commits/r15360.txt
   trunk/blfs/traduc/commits/r15361.txt
   trunk/blfs/traduc/commits/r15362.txt
   trunk/blfs/traduc/commits/r15363.txt
   trunk/blfs/xsoft/other/asymptote.xml
   trunk/blfs/xsoft/other/xscreensaver.xml
Removed:
   trunk/blfs/general/genutils/xscreensaver.xml
Modified:
   trunk/blfs/general.ent
   trunk/blfs/general/genlib/libatasmart.xml
   trunk/blfs/general/genlib/libdaemon.xml
   trunk/blfs/general/genlib/libgusb.xml
   trunk/blfs/general/genutils/genutils.xml
   trunk/blfs/general/prog/gdb.xml
   trunk/blfs/general/prog/git.xml
   trunk/blfs/general/prog/llvm.xml
   trunk/blfs/general/prog/swig.xml
   trunk/blfs/general/prog/vala.xml
   trunk/blfs/general/sysutils/colord.xml
   trunk/blfs/general/sysutils/unrar.xml
   trunk/blfs/multimedia/videoutils/ffmpeg.xml
   trunk/blfs/networking/netprogs/samba.xml
   trunk/blfs/networking/netutils/avahi.xml
   trunk/blfs/networking/netutils/mod_dnssd.xml
   trunk/blfs/packages.ent
   trunk/blfs/postlfs/security/gnutls.xml
   trunk/blfs/pst/printing/cups-filters.xml
   trunk/blfs/pst/typesetting/texlive-pass1.xml
   trunk/blfs/pst/typesetting/texlive.xml
   trunk/blfs/pst/typesetting/typesetting.xml
   trunk/blfs/server/databases/sqlite.xml
   trunk/blfs/server/major/vsftpd.xml
   trunk/blfs/x/installing/mesalib.xml
   trunk/blfs/x/installing/x7app.xml
   trunk/blfs/x/installing/x7driver-intel.xml
   trunk/blfs/x/lib/gtk+3.xml
   trunk/blfs/x/lib/webkitgtk26.xml
   trunk/blfs/xsoft/graphweb/firefox.xml
   trunk/blfs/xsoft/graphweb/seamonkey.xml
   trunk/blfs/xsoft/other/thunderbird.xml
Log:
[BLFS-EN] MAJ ROBOT

Added: trunk/blfs/archive/texlive-source-full.xml
===================================================================
(Binary files differ)

Index: trunk/blfs/archive/texlive-source-full.xml
===================================================================
--- trunk/blfs/archive/texlive-source-full.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/archive/texlive-source-full.xml	2015-01-18 20:30:47 UTC (rev 6727)

Property changes on: trunk/blfs/archive/texlive-source-full.xml
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/xml
\ No newline at end of property
Modified: trunk/blfs/general/genlib/libatasmart.xml
===================================================================
--- trunk/blfs/general/genlib/libatasmart.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/general/genlib/libatasmart.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -3,7 +3,7 @@
    "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../../general.ent">
   %general-entities;
-  <!ENTITY libatasmart-download-http "&fedora-http-repo;/libatasmart/libatasmart-&libatasmart-version;.tar.xz/&libatasmart-md5sum;/libatasmart-&libatasmart-version;.tar.xz">
+  <!ENTITY libatasmart-download-http "http://0pointer.de/public/libatasmart-&libatasmart-version;.tar.xz">
   <!ENTITY libatasmart-download-ftp  " ">
   <!ENTITY libatasmart-md5sum        "53afe2b155c36f658e121fe6def33e77">
   <!ENTITY libatasmart-size          "248 Ko">

Modified: trunk/blfs/general/genlib/libdaemon.xml
===================================================================
--- trunk/blfs/general/genlib/libdaemon.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/general/genlib/libdaemon.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -3,7 +3,7 @@
    "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../../general.ent">
   %general-entities;
-  <!ENTITY libdaemon-download-http "&fedora-http-repo;/libdaemon/libdaemon-&libdaemon-version;.tar.gz/&libdaemon-md5sum;/libdaemon-&libdaemon-version;.tar.gz">
+  <!ENTITY libdaemon-download-http "http://0pointer.de/lennart/projects/libdaemon/libdaemon-&libdaemon-version;.tar.gz">
   <!ENTITY libdaemon-download-ftp  " ">
   <!ENTITY libdaemon-md5sum        "509dc27107c21bcd9fbf2f95f5669563">
   <!ENTITY libdaemon-size          "332 Ko">

Modified: trunk/blfs/general/genlib/libgusb.xml
===================================================================
--- trunk/blfs/general/genlib/libgusb.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/general/genlib/libgusb.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -5,10 +5,10 @@
   %general-entities;
   <!ENTITY libgusb-download-http "http://people.freedesktop.org/~hughsient/releases/libgusb-&libgusb-version;.tar.xz">
   <!ENTITY libgusb-download-ftp  " ">
-  <!ENTITY libgusb-md5sum        "82b9c0b3ca2d8a3220135f3eb4e88bf4">
-  <!ENTITY libgusb-size          "264 Ko">
-  <!ENTITY libgusb-buildsize     "3.7 Mo (additional 0.1 Mo for the tests)">
-  <!ENTITY libgusb-time          "0.1 SBU">
+  <!ENTITY libgusb-md5sum        "279683b51fa8fc2bb29216cc165a1e32">
+  <!ENTITY libgusb-size          "268 Ko">
+  <!ENTITY libgusb-buildsize     "3.9 Mo (additional 0.4 Mo for the tests)">
+  <!ENTITY libgusb-time          "moins de 0.1 SBU">
 ]>
 <sect1 id="libgusb" xreflabel="libgusb-&libgusb-version;">
   <?dbhtml filename="libgusb.html"?>

Modified: trunk/blfs/general/genutils/genutils.xml
===================================================================
--- trunk/blfs/general/genutils/genutils.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/general/genutils/genutils.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -34,5 +34,4 @@
 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="time.xml"/>
 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="tree.xml"/>
 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="unixodbc.xml"/>
-  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="xscreensaver.xml"/>
 </chapter>

Deleted: trunk/blfs/general/genutils/xscreensaver.xml
===================================================================
--- trunk/blfs/general/genutils/xscreensaver.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/general/genutils/xscreensaver.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -1,241 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
-   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-  <!ENTITY % general-entities SYSTEM "../../general.ent">
-  %general-entities;
-  <!ENTITY xscreensaver-download-http "http://www.jwz.org/xscreensaver/xscreensaver-&xscreensaver-version;.tar.gz">
-  <!ENTITY xscreensaver-download-ftp  " ">
-  <!ENTITY xscreensaver-md5sum        "c003f79502e67f46aa5bedf24cbbd77c">
-  <!ENTITY xscreensaver-size          "11 Mo">
-  <!ENTITY xscreensaver-buildsize     "204 Mo">
-  <!ENTITY xscreensaver-time          "1 SBU">
-]>
-<sect1 id="xscreensaver" xreflabel="XScreenSaver-&xscreensaver-version;">
-  <?dbhtml filename="xscreensaver.html"?>
-  <sect1info>
-    <othername>$LastChangedBy : bdubbs $</othername>
-    <date>$Date : 2013-03-15 17:26:39 +0100 (Fri, 15 Mar 2013) $</date>
-  </sect1info>
-  <title>XScreenSaver-&xscreensaver-version;</title>
-  <indexterm zone="xscreensaver">
-    <primary sortas="a-xscreensaver">Xscreensaver</primary>
-  </indexterm>
-  <sect2 role="package">
-    <title>Introduction à XScreenSaver</title>
-    <para>Le paquet <application>XScreenSaver</application> est un économiseur
-    et un verrouilleur d'écran modulaire pour le système X Window. Il est extrêmement
-    personnalisable et il permet l'utilisation de n'importe quel programme
-    qui peut dessiner la fenêtre racine comme mode d'affichage. Le but de
-    <application>XScreenSaver</application> est d'afficher de
-    jolies images sur votre écran lorsqu'il n'est pas utilisé,
-    partant de la philosophie que les moniteurs non surveillés devraient toujours
-    être occupés à des tâches intéressantes, comme ils le font pour les films. Néanmoins,
-    <application>XScreenSaver</application> peut aussi être utilisé comme un
-    verrouilleur d'écran pour empêcher autrui d'utiliser votre terminal
-    lorsque vous êtes occupé.</para>
-   &lfs76_checked;
-    <bridgehead renderas="sect3">Informations sur le paquet</bridgehead>
-    <itemizedlist spacing="compact">
-      <listitem>
-        <para>Téléchargement (HTTP) : <ulink url="&xscreensaver-download-http;"/></para>
-      </listitem>
-      <listitem>
-        <para>Téléchargement (FTP) : <ulink url="&xscreensaver-download-ftp;"/></para>
-      </listitem>
-      <listitem>
-        <para>Somme de contrôle MD5 du téléchargement : &xscreensaver-md5sum;</para>
-      </listitem>
-      <listitem>
-        <para>Taille du téléchargement : &xscreensaver-size;</para>
-      </listitem>
-      <listitem>
-        <para>Estimation de l'espace disque requis : &xscreensaver-buildsize;</para>
-      </listitem>
-      <listitem>
-        <para>Estimation du temps de construction : &xscreensaver-time;</para>
-      </listitem>
-    </itemizedlist>
-    <bridgehead renderas="sect3">Dépendances de XScreenSaver</bridgehead>
-    <bridgehead renderas="sect4">Requises</bridgehead>
-    <para role="required">
-      <xref linkend="libglade"/> et
-      <xref linkend="xorg7-app"/>
-    </para>
-    <bridgehead renderas="sect4">Recommandées</bridgehead>
-    <para role="recommended">
-      <xref linkend="glu"/>
-    </para>
-<bridgehead renderas="sect4">Facultatives</bridgehead>
-    <para role="optional">
-      <ulink url="&gnome-download-http;/gdm/">GDM</ulink>,
-      <ulink url="http://linas.org/gle/">GLE</ulink> et
-      <xref linkend="linux-pam"/>
-    </para>
-    <para condition="html" role="usernotes">Notes utilisateur :
-    <ulink url="&blfs-wiki;/xscreensaver"/></para>
-  </sect2>
-  <sect2 role="installation">
-    <title>Installation de XScreenSaver</title>
-    <para>Installez <application>XScreenSaver</application> en lançant les commandes
-    suivantes :</para>
-<screen>
-<userinput>./configure --prefix=/usr &&
-make</userinput>
-</screen>
-    <para>Ce paquet n'est pas fourni avec une suite de tests.</para>
-    <para>Maintenant, en tant qu'utilisateur <systemitem class="username">root</systemitem> :</para>
-<screen role="root">
-<userinput>make install</userinput>
-</screen>
-  </sect2>
-  <sect2 role="commands">
-    <title>Explication des commandes</title>
-    <para><option>--with-setuid-hacks</option> : Ce paramètre autorise
-    certaines démos à s'installer avec l'uid <systemitem class="username">root</systemitem>,
-    ce qui est nécessaire pour pinger d'autres machines.</para>
-  </sect2>
-  <sect2 role="configuration">
-    <title>Configuration de XScreenSaver</title>
-    <sect3 id="xscreensaver-config">
-      <title>Fichiers de configuration</title>
-      <para>
-        <filename>/etc/X11/app-defaults/XScreenSaver</filename> et
-        <filename>~/.xscreensaver</filename>
-      </para>
-      <indexterm zone="xscreensaver xscreensaver-config">
-        <primary sortas="e-etc-X11-app-defaults-XScreenSaver">/etc/X11/app-defaults/XScreenSaver</primary>
-      </indexterm>
-      <indexterm zone="xscreensaver xscreensaver-config">
-        <primary sortas="e-AA.xscreensaver">~/.xscreensaver</primary>
-      </indexterm>
-    </sect3>
-    <sect3>
-      <title>Configuration avec Linux PAM</title>
-      <para>
-        Si <application>XScreenSaver</application> a été construit avec le
-        support <application>Linux PAM</application>, vous devez créer un fichier
-        de configuration <application>PAM</application> pour que <application>XScreenSaver</application> 
-        fonctionne bien avec BLFS.
-      </para>
-      <para>
-        Lancez les commandes suivantes en tant qu'utilisateur
-        <systemitem class="username">root</systemitem> pour créer le fichier de
-        configuration pour <application>Linux PAM</application> :
-      </para>
-<screen role="root">
-<userinput>cat > /etc/pam.d/xscreensaver << "EOF"
-<literal># Begin /etc/pam.d/xscreensaver
-auth    include system-auth
-account include system-account
-# End /etc/pam.d/xscreensaver</literal>
-EOF</userinput>
-</screen>
-    </sect3>
-  </sect2>
-  <sect2 role="content">
-    <title>Contenu</title>
-    <segmentedlist>
-      <segtitle>Programmes installés</segtitle>
-      <segtitle>Bibliothèque installée</segtitle>
-      <segtitle>Répertoires installés</segtitle>
-      <seglistitem>
-        <seg>
-          xscreensaver, xscreensaver-command, xscreensaver-demo, xscreensaver-getimage,
-          xscreensaver-getimage-file, xscreensaver-getimage-video,
-          xscreensaver-gl-helper et xscreensaver-text
-        </seg>
-        <seg>Aucune</seg>
-        <seg>
-          /usr/libexec/xscreensaver et /usr/share/xscreensaver
-        </seg>
-      </seglistitem>
-    </segmentedlist>
-    <variablelist>
-      <bridgehead renderas="sect3">Descriptions courtes</bridgehead>
-      <?dbfo list-presentation="list"?>
-      <?dbhtml list-presentation="table"?>
-      <varlistentry id="xscreensaver-prog">
-        <term><command>xscreensaver</command></term>
-        <listitem>
-          <para>est un démon d'économiseur et de verrouilleur d'écran.</para>
-          <indexterm zone="xscreensaver xscreensaver-prog">
-            <primary sortas="b-xscreensaver">xscreensaver</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-      <varlistentry id="xscreensaver-command">
-        <term><command>xscreensaver-command</command></term>
-        <listitem>
-          <para>contrôle un processus <command>xscreensaver</command>
-          en cours d'exécution en lui envoyant des messages de client.</para>
-          <indexterm zone="xscreensaver xscreensaver-command">
-            <primary sortas="b-xscreensaver-command">xscreensaver-command</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-      <varlistentry id="xscreensaver-demo">
-        <term><command>xscreensaver-demo</command></term>
-        <listitem>
-          <para>est une interface graphique pour régler les paramètres
-          utilisés par le démon <command>xscreensaver</command> en arrière-plan.</para>
-          <indexterm zone="xscreensaver xscreensaver-demo">
-            <primary sortas="b-xscreensaver-demo">xscreensaver-demo</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-      <varlistentry id="xscreensaver-getimage">
-        <term><command>xscreensaver-getimage</command></term>
-        <listitem>
-          <para>est un programme d'aide pour les modules
-          <command>xscreensaver</command> pour la manipulation
-          d'images.</para>
-          <indexterm zone="xscreensaver xscreensaver-getimage">
-            <primary sortas="b-xscreensaver-getimaage">xscreensaver-getimage</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-      <varlistentry id="xscreensaver-getimage-file">
-        <term><command>xscreensaver-getimage-file</command></term>
-		<listitem>
-          <para>est un programme d'aide pour les modules
-          <command>xscreensaver</command> pour la manipulation
-          d'images.</para>
-          <indexterm zone="xscreensaver xscreensaver-getimage-file">
-            <primary sortas="b-xscreensaver-getimaage-file">xscreensaver-getimage-file</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-      <varlistentry id="xscreensaver-getimage-video">
-        <term><command>xscreensaver-getimage-video</command></term>
-        <listitem>
-          <para>est un programme d'aide pour les modules
-          <command>xscreensaver</command> pour la manipulation
-          d'images.</para>
-          <indexterm zone="xscreensaver xscreensaver-getimage-video">
-            <primary sortas="b-xscreensaver-getimaage-video">xscreensaver-getimage-video</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-      <varlistentry id="xscreensaver-gl-helper">
-        <term><command>xscreensaver-gl-helper</command></term>
-        <listitem>
-          <para>est un programme d'aide pour les modules OPenGL
-          <command>xscreensaver</command>.</para>
-          <indexterm zone="xscreensaver xscreensaver-gl-helper">
-            <primary sortas="b-xscreensaver-gl-helper">xscreensaver-gl-helper</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-      <varlistentry id="xscreensaver-text">
-        <term><command>xscreensaver-text</command></term>
-        <listitem>
-          <para>affiche du texte sur la sortie standard, pour être utilisé par
-          les économiseurs d'écran.</para>
-          <indexterm zone="xscreensaver xscreensaver-text">
-            <primary sortas="b-xscreensaver-text">xscreensaver-text</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-    </variablelist>
-  </sect2>
-</sect1>

Modified: trunk/blfs/general/prog/gdb.xml
===================================================================
--- trunk/blfs/general/prog/gdb.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/general/prog/gdb.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -5,10 +5,10 @@
   %general-entities;
   <!ENTITY gdb-download-http "http://ftp.gnu.org/gnu/gdb/gdb-&gdb-version;.tar.xz">
   <!ENTITY gdb-download-ftp  "ftp://ftp.gnu.org/gnu/gdb/gdb-&gdb-version;.tar.xz">
-  <!ENTITY gdb-md5sum        "8072be87a94be0936bc3b4b6941b0862">
+  <!ENTITY gdb-md5sum        "a80cf252ed2e775d4e4533341bbf2459">
   <!ENTITY gdb-size          "17 Mo">
-  <!ENTITY gdb-buildsize     "325 Mo (446 Mo with checks)">
-  <!ENTITY gdb-time          "2.2 SBU (additional 5.8 SBU for checks)">
+  <!ENTITY gdb-buildsize     "388 Mo (534 Mo with checks)">
+  <!ENTITY gdb-time          "2.2 SBU (add up to 10 SBU for checks)">
 ]>
 <sect1 id="gdb" xreflabel="gdb-&gdb-version;">
   <?dbhtml filename="gdb.html"?>

Modified: trunk/blfs/general/prog/git.xml
===================================================================
--- trunk/blfs/general/prog/git.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/general/prog/git.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -6,7 +6,7 @@
   <!ENTITY git-root "https://www.kernel.org/pub/software/scm/git" >
   <!ENTITY git-download-http "&git-root;/git-&git-version;.tar.xz">
   <!ENTITY git-download-ftp  "ftp://ftp.kernel.org/pub/software/scm/git/git-&git-version;.tar.xz">
-  <!ENTITY git-md5sum        "43e01f9d96ba8c11611e0eef0d9f9f28">
+  <!ENTITY git-md5sum        "f694e8c911a6f7cfd7aec7b99454ed1f">
   <!ENTITY git-size          "3.4 Mo">
   <!ENTITY git-buildsize     "0.3 Go (additional 13 Mo for downloaded docs and man pages, or 27 Mo building docs and man pages)">
   <!ENTITY git-time          "0.7 SBU and additional 2.2 SBU for tests (using parallelism=4) or 2.9 SBU for docs and man build">
@@ -100,8 +100,7 @@
     <para>Installez <application>Git</application> en lançant les commandes
     suivantes :</para>
 <screen>
-<userinput>./configure --prefix=/usr         \
-            --with-gitconfig=/etc/gitconfig &&
+<userinput>./configure --prefix=/usr                     --with-gitconfig=/etc/gitconfig &&
 make</userinput>
 </screen>
      <para>
@@ -147,17 +146,15 @@
     <para>Si vous avez téléchargé les pages de manuel déballez les en tant qu'utilisateur
     <systemitem class="username">root</systemitem> :</para>
 <screen role="root">
-<userinput>tar -xf ../git-manpages-&git-version;.tar.xz \
-    -C /usr/share/man --no-same-owner --no-overwrite-dir</userinput>
+<userinput>tar -xf ../git-manpages-&git-version;.tar.xz     -C /usr/share/man --no-same-owner --no-overwrite-dir</userinput>
 </screen>
     <para>Si vous avez téléchargé les documentations HTML déballez les en tant qu'utilisateur
     <systemitem class="username">root</systemitem> :</para>
 <screen role="root">
 <userinput>mkdir -vp   /usr/share/doc/git-&git-version; &&
-tar   -xf   ../git-htmldocs-&git-version;.tar.xz \
-      -C    /usr/share/doc/git-&git-version; --no-same-owner --no-overwrite-dir &&
-find        /usr/share/doc/git-&git-version; -type d -exec chmod 755 {} \; &&
-find        /usr/share/doc/git-&git-version; -type f -exec chmod 644 {} \;</userinput>
+tar   -xf   ../git-htmldocs-&git-version;.tar.xz       -C    /usr/share/doc/git-&git-version; --no-same-owner --no-overwrite-dir &&
+find        /usr/share/doc/git-&git-version; -type d -exec chmod 755 {} ; &&
+find        /usr/share/doc/git-&git-version; -type f -exec chmod 644 {} ;</userinput>
 </screen>
    <bridgehead renderas="sect3">Reorganisez les pages de man et.ou les docs html (pour les deux méthodes)</bridgehead>
     <para>

Modified: trunk/blfs/general/prog/llvm.xml
===================================================================
--- trunk/blfs/general/prog/llvm.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/general/prog/llvm.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -5,16 +5,16 @@
   %general-entities;
   <!ENTITY llvm-download-http "http://llvm.org/releases/&llvm-version;/llvm-&llvm-version;.src.tar.xz">
   <!ENTITY llvm-download-ftp  " ">
-  <!ENTITY llvm-md5sum        "d6987305a1a0e58e128c1374cd3b8fef">
+  <!ENTITY llvm-md5sum        "2d3d8004f38852aa679e5945b8ce0b14">
   <!ENTITY llvm-size          "12 Mo">
-  <!ENTITY llvm-buildsize     "618 Mo (1.3 Go with Clang) and 78 Mo for the tests">
-  <!ENTITY llvm-time          "20 SBU (38 SBU with Clang) and 0.3 for tests">
+  <!ENTITY llvm-buildsize     "618 Mo (1.2 Go with Clang) and 78 Mo for the tests">
+  <!ENTITY llvm-time          "6.5 SBU - using parallelism=4 (12 SBU with Clang - using parallelism=4) and 0.3 for tests">
   <!ENTITY clang-download-http "http://llvm.org/releases/&llvm-version;/cfe-&llvm-version;.src.tar.xz">
-  <!ENTITY clang-md5sum        "27718dd13c7df83e15f997116bbb4aef">
+  <!ENTITY clang-md5sum        "93f9532f8f7e6f1d8e5c1116907051cb">
   <!ENTITY clang-size          "7.9 Mo">
   <!ENTITY rt-version                "&llvm-version;">
   <!ENTITY compiler-rt-download-http "http://llvm.org/releases/&rt-version;/compiler-rt-&rt-version;.src.tar.xz">
-  <!ENTITY compiler-rt-md5sum        "02624d2a9144278c3808c00dbbab56c8">
+  <!ENTITY compiler-rt-md5sum        "d626cfb8a9712cb92b820798ab5bc1f8">
   <!ENTITY compiler-rt-size          "1.1 Mo">
 ]>
 <sect1 id="llvm" xreflabel="llvm-&llvm-version;">
@@ -143,15 +143,8 @@
       Installez <application>LLVM</application> en lançant les commandes suivantes :
     </para>
 <screen>
-<userinput>sed -e "s:/docs/llvm:/share/doc/llvm-&llvm-version;:" \
-    -i Makefile.config.in &&
-CC=gcc CXX=g++                         \
-./configure --prefix=/usr              \
-            --sysconfdir=/etc          \
-            --enable-libffi            \
-            --enable-optimized         \
-            --enable-shared            \
-            --disable-assertions       &&
+<userinput>sed -e "s:/docs/llvm:/share/doc/llvm-&llvm-version;:"     -i Makefile.config.in &&
+CC=gcc CXX=g++                         ./configure --prefix=/usr                          --sysconfdir=/etc                      --enable-libffi                        --enable-optimized                     --enable-shared                        --disable-assertions       &&
 make</userinput>
 </screen>
     <para>

Modified: trunk/blfs/general/prog/swig.xml
===================================================================
--- trunk/blfs/general/prog/swig.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/general/prog/swig.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -5,10 +5,10 @@
   %general-entities;
   <!ENTITY swig-download-http "&sourceforge-repo;/swig/swig-&swig-version;.tar.gz">
   <!ENTITY swig-download-ftp  " ">
-  <!ENTITY swig-md5sum        "62f9b0d010cef36a13a010dc530d0d41">
-  <!ENTITY swig-size          "5.42 Mo">
-  <!ENTITY swig-buildsize     "77 Mo (up to 1.1 Go for tests)">
-  <!ENTITY swig-time          "0.4 SBU (24 SBU for tests of Guile, Go, Java, Lua, Perl, PHP, Python, Ruby, and tcl)">
+  <!ENTITY swig-md5sum        "9cb8c0efda39dc6db5f85389e671fb59">
+  <!ENTITY swig-size          "5.45 Mo">
+  <!ENTITY swig-buildsize     "78 Mo (up to 1.1 Go for tests)">
+  <!ENTITY swig-time          "0.4 SBU (22 SBU for tests of Guile, Go, Java, Lua, Perl, PHP, Python 2 and 3, Ruby, and Tcl)">
 ]>
 <sect1 id="swig" xreflabel="SWIG-&swig-version;">
   <?dbhtml filename="swig.html"?>

Modified: trunk/blfs/general/prog/vala.xml
===================================================================
--- trunk/blfs/general/prog/vala.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/general/prog/vala.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -5,10 +5,10 @@
   %general-entities;
   <!ENTITY vala-download-http "&gnome-download-http;/vala/&vala-major-version;/vala-&vala-version;.tar.xz">
   <!ENTITY vala-download-ftp  "&gnome-download-ftp;/vala/&vala-major-version;/vala-&vala-version;.tar.xz">
-  <!ENTITY vala-md5sum        "723a03b822d4cc47abc4019685970a3e">
+  <!ENTITY vala-md5sum        "cb712cc5785e2133d58af9e54b2c79db">
   <!ENTITY vala-size          "2.6 Mo">
   <!ENTITY vala-buildsize     "100 Mo">
-  <!ENTITY vala-time          "0.7 SBU (ajouter 0.1 SBU pour lancer la suite de tests)">
+  <!ENTITY vala-time          "1.1 SBU (ajouter 0.1 SBU pour lancer la suite de tests)">
 ]>
 <sect1 id="vala" xreflabel="Vala-&vala-version;">
   <?dbhtml filename="vala.html"?>

Modified: trunk/blfs/general/sysutils/colord.xml
===================================================================
--- trunk/blfs/general/sysutils/colord.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/general/sysutils/colord.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -6,7 +6,7 @@
   <!ENTITY colord-download-http
            "http://www.freedesktop.org/software/colord/releases/colord-&colord-version;.tar.xz">
   <!ENTITY colord-download-ftp  " ">
-  <!ENTITY colord-md5sum        "73d5979385667c5f0d683e7f2b226758">
+  <!ENTITY colord-md5sum        "f663cb211d1d338b246daf02ed670910">
   <!ENTITY colord-size          "1.2 Mo">
   <!ENTITY colord-buildsize     "32 Mo (additional 3 Mo to build and install the API documentation, and 3 Mo for the tests)">
   <!ENTITY colord-time          "0.5 SBU (additional 0.2 SBU for the tests)">
@@ -95,22 +95,12 @@
     </para>
 <screen role="root">
 <userinput>groupadd -g 71 colord &&
-useradd -c "Color Daemon Owner" -d /var/lib/colord -u 71 \
-        -g colord -s /bin/false colord</userinput>
+useradd -c "Color Daemon Owner" -d /var/lib/colord -u 71         -g colord -s /bin/false colord</userinput>
 </screen>
     <para>Installez <application>colord</application> en lançant les commandes suivantes :
     </para>
 <screen>
-<userinput>./configure --prefix=/usr                \
-            --sysconfdir=/etc            \
-            --localstatedir=/var         \
-            --with-daemon-user=colord    \
-            --enable-vala                \
-            --enable-systemd-login=no    \
-            --disable-argyllcms-sensor   \
-            --disable-bash-completion    \
-            --disable-static             \
-            --with-systemdsystemunitdir=no &&
+<userinput>./configure --prefix=/usr                            --sysconfdir=/etc                        --localstatedir=/var                     --with-daemon-user=colord                --enable-vala                            --enable-systemd-login=no                --disable-argyllcms-sensor               --disable-bash-completion                --disable-static                         --with-systemdsystemunitdir=no &&
 make</userinput>
 </screen>
     <para>Maintenant, en tant qu'utilisateur <systemitem class="username">root</systemitem> :</para>

Modified: trunk/blfs/general/sysutils/unrar.xml
===================================================================
--- trunk/blfs/general/sysutils/unrar.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/general/sysutils/unrar.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -5,7 +5,7 @@
   %general-entities;
   <!ENTITY unrar-download-http "http://www.rarlab.com/rar/unrarsrc-&unrar-version;.tar.gz">
   <!ENTITY unrar-download-ftp  " ">
-  <!ENTITY unrar-md5sum        "1c14a30052bf5e0b1a02fd9e3e638452">
+  <!ENTITY unrar-md5sum        "9611a2a5d5b6dce39ee5b3770bab2387">
   <!ENTITY unrar-size          "216 Ko">
   <!ENTITY unrar-buildsize     "2.4 Mo">
   <!ENTITY unrar-time          "moins de 0.1 SBU">

Modified: trunk/blfs/general.ent
===================================================================
--- trunk/blfs/general.ent	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/general.ent	2015-01-18 20:30:47 UTC (rev 6727)
@@ -1,6 +1,6 @@
 <!-- $LastChangedBy: igor $ $Date: 2014-06-29 11:28:58 +0200 (dim. 29 juin 2014) $ -->
 
-<!ENTITY day          "10">                   <!-- Always 2 digits -->
+<!ENTITY day          "18">                   <!-- Always 2 digits -->
 <!ENTITY month        "01">                   <!-- Always 2 digits -->
 <!ENTITY year         "2015">
 <!ENTITY copyrightdate "2001-&year;">

Modified: trunk/blfs/multimedia/videoutils/ffmpeg.xml
===================================================================
--- trunk/blfs/multimedia/videoutils/ffmpeg.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/multimedia/videoutils/ffmpeg.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -5,10 +5,10 @@
   %general-entities;
   <!ENTITY ffmpeg-download-http "http://ffmpeg.org/releases/ffmpeg-&ffmpeg-version;.tar.bz2">
   <!ENTITY ffmpeg-download-ftp  " ">
-  <!ENTITY ffmpeg-md5sum        "308d49d91752ac00ded9483ebaab849d">
-  <!ENTITY ffmpeg-size          "7.3 Mo">
-  <!ENTITY ffmpeg-buildsize     "0.1 Go (additional 879 Mo for docs and 2291 Mo to run the FATE suite)">
-  <!ENTITY ffmpeg-time          "5.3 SBU (additional 1.1 SBU for docs and 5.5 SBU, to run the FATE suite, after sample files are downloaded)">
+  <!ENTITY ffmpeg-md5sum        "efba7c5cfbea9ce58ff693cd08f90ffa">
+  <!ENTITY ffmpeg-size          "7.4 Mo">
+  <!ENTITY ffmpeg-buildsize     "133 Mo (additional 856 Mo for docs and 2291 Mo to run the FATE suite)">
+  <!ENTITY ffmpeg-time          "1.2 SBU (using parallelism=4); additional 1.1 SBU for docs and 5.6 SBU to run the FATE suite, after sample files are downloaded">
 ]>
 <sect1 id="ffmpeg" xreflabel="FFmpeg-&ffmpeg-version;">
   <?dbhtml filename="ffmpeg.html"?>
@@ -129,22 +129,7 @@
     
 <screen>
 <userinput>sed -i 's/-lflite"/-lflite -lasound"/' configure &&
-./configure --prefix=/usr        \
-            --enable-gpl         \
-            --enable-version3    \
-            --enable-nonfree     \
-            --disable-static     \
-            --enable-shared      \
-            --disable-debug      \
-            --enable-libass      \
-            --enable-libfdk-aac  \
-            --enable-libmp3lame  \
-            --enable-libtheora   \
-            --enable-libvorbis   \
-            --enable-libvpx      \
-            --enable-libx264     \
-            --enable-x11grab     \
-            --docdir=/usr/share/doc/ffmpeg-&ffmpeg-version; &&
+./configure --prefix=/usr                    --enable-gpl                     --enable-version3                --enable-nonfree                 --disable-static                 --enable-shared                  --disable-debug                  --enable-libass                  --enable-libfdk-aac              --enable-libmp3lame              --enable-libtheora               --enable-libvorbis               --enable-libvpx                  --enable-libx264                 --enable-x11grab                 --docdir=/usr/share/doc/ffmpeg-&ffmpeg-version; &&
 make &&
 gcc tools/qt-faststart.c -o tools/qt-faststart</userinput>
 </screen>
@@ -155,15 +140,14 @@
       Postscript de la documentation, tapez les commandes suivantes:
     </para>
 <screen>
-<userinput>sed -i '$s/$/\n\n at bye/' doc/{git-howto,nut,fate}.texi             &&
-sed -i '/machine:i386/ s/\\/@backslashchar{}/g' doc/platform.texi &&
+<userinput>sed -i '$s/$/nn at bye/' doc/{git-howto,nut,fate}.texi             &&
+sed -i '/machine:i386/ s/\/@backslashchar{}/g' doc/platform.texi &&
 pushd doc &&
 for DOCNAME in `basename -s .html *.html`
 do
     texi2pdf -b $DOCNAME.texi &&
     texi2dvi -b $DOCNAME.texi &&
-    dvips -o    $DOCNAME.ps   \
-                $DOCNAME.dvi
+    dvips -o    $DOCNAME.ps                   $DOCNAME.dvi
 done                          &&
 popd                          &&
 unset DOCNAME</userinput>
@@ -180,18 +164,15 @@
 <screen role="root">
 <userinput>make install &&
 install -v -m755    tools/qt-faststart /usr/bin &&
-install -v -m644    doc/*.txt \
-                    /usr/share/doc/ffmpeg-&ffmpeg-version;</userinput>
+install -v -m644    doc/*.txt                     /usr/share/doc/ffmpeg-&ffmpeg-version;</userinput>
 </screen>
     <para>
 	Si les documentations PDF et Postscript sont construites, tapez les commandes suivantes , en 
         tant qu'utilisateur <systemitem class="username">root</systemitem> pour l'installer:
     </para>
 <screen role="root">
-<userinput>install -v -m644 doc/*.pdf \
-                 /usr/share/doc/ffmpeg-&ffmpeg-version; &&
-install -v -m644 doc/*.ps  \
-                 /usr/share/doc/ffmpeg-&ffmpeg-version;</userinput>
+<userinput>install -v -m644 doc/*.pdf                  /usr/share/doc/ffmpeg-&ffmpeg-version; &&
+install -v -m644 doc/*.ps                   /usr/share/doc/ffmpeg-&ffmpeg-version;</userinput>
 </screen>
     <para>Si vous avez utilisé <command>doxygen</command> pour créer la 
     documentation de l'API, installez-la (300 Mo d'espace en plus) en
@@ -226,8 +207,7 @@
       précédents, lancez la commande suivante:
     </para>
 <screen>
-<userinput><command>rsync -vrltLW  --delete --timeout=60 --contimeout=60 \
-      rsync://fate-suite.ffmpeg.org/fate-suite/ fate-suite/</command></userinput>
+<userinput><command>rsync -vrltLW  --delete --timeout=60 --contimeout=60       rsync://fate-suite.ffmpeg.org/fate-suite/ fate-suite/</command></userinput>
 </screen>
    </sect2>
   <sect2 role="commands">

Modified: trunk/blfs/networking/netprogs/samba.xml
===================================================================
--- trunk/blfs/networking/netprogs/samba.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/networking/netprogs/samba.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -3,9 +3,9 @@
    "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../../general.ent">
   %general-entities;
-  <!ENTITY samba-download-http "http://ftp.samba.org/pub/samba/stable/samba-&samba-version;.tar.gz">
-  <!ENTITY samba-download-ftp  "ftp://ftp.samba.org/pub/samba/stable/samba-&samba-version;.tar.gz">
-  <!ENTITY samba-md5sum        "9f7bae123ed39d2aa9ba842d3a138d54">
+  <!ENTITY samba-download-http "https://download.samba.org/pub/samba/stable/samba-&samba-version;.tar.gz">
+  <!ENTITY samba-download-ftp  "ftp://download.samba.org/pub/samba/stable/samba-&samba-version;.tar.gz">
+  <!ENTITY samba-md5sum        "9c3bc2fb98fd3bac9945b911c71fdc66">
   <!ENTITY samba-size          "19 Mo">
   <!ENTITY samba-buildsize     "416 Mo (additional 397 Mo for the quicktest, reputedly up to 500 Mo additional for all tests)">
   <!ENTITY samba-time          "2.7 SBU, using parallelism=4 (additional 4.6 SBU for the quicktest, reputedly up to 110 SBU to run all tests)">
@@ -93,20 +93,12 @@
 	suivantes :</para>
       
 <screen>
-<userinput>./configure                             \
-    --prefix=/usr                       \
-    --sysconfdir=/etc                   \
-    --localstatedir=/var                \
-    --with-piddir=/run/samba            \
-    --with-pammodulesdir=/lib/security  \
-    --without-systemd                   \
-    --enable-fhs                        \
-    --enable-nss-wrapper                &&
+<userinput>./configure                                 --prefix=/usr                           --sysconfdir=/etc                       --localstatedir=/var                    --with-piddir=/run/samba                --with-pammodulesdir=/lib/security      --without-systemd                       --enable-fhs                            --enable-nss-wrapper                &&
 make</userinput>
 </screen>
     <para>Maintenant, en tant qu'utilisateur <systemitem class="username">root</systemitem>:</para>
 <screen>
-<userinput>sed -i "/samba3.blackbox.failure.failure/i \^samba3.raw.eas" selftest/knownfail</userinput>
+<userinput>sed -i "/samba3.blackbox.failure.failure/i ^samba3.raw.eas" selftest/knownfail</userinput>
 </screen>
       
       </sect2>
@@ -161,17 +153,13 @@
 ln -v -sf ../../lib/libnss_wins.so.2    /usr/lib/libnss_wins.so    &&
 install -v -m644    examples/smb.conf.default /etc/samba &&
 mkdir -pv /etc/openldap/schema                        &&
-install -v -m644    examples/LDAP/README              \
-                    /etc/openldap/schema/README.LDAP  &&
+install -v -m644    examples/LDAP/README                                  /etc/openldap/schema/README.LDAP  &&
                     
-install -v -m644    examples/LDAP/samba*              \
-                    /etc/openldap/schema              &&
+install -v -m644    examples/LDAP/samba*                                  /etc/openldap/schema              &&
                     
-install -v -m755    examples/LDAP/{get*,ol*} \
-                    /etc/openldap/schema              &&
+install -v -m755    examples/LDAP/{get*,ol*}                     /etc/openldap/schema              &&
 install -v -m755 -d /usr/share/doc/samba-&samba-version; &&
-install -v -m644    lib/ntdb/doc/design.pdf \
-                    /usr/share/doc/samba-&samba-version;</userinput>
+install -v -m644    lib/ntdb/doc/design.pdf                     /usr/share/doc/samba-&samba-version;</userinput>
 </screen>
 	</sect3>
 	<sect3>
@@ -360,8 +348,7 @@
 		
 <screen role="root">
 <userinput>groupadd -g 99 nogroup &&
-useradd -c "Unprivileged Nobody" -d /dev/null -g nogroup \
-    -s /bin/false -u 99 nobody</userinput>
+useradd -c "Unprivileged Nobody" -d /dev/null -g nogroup     -s /bin/false -u 99 nobody</userinput>
 </screen>
 		<para>Si vous avez aussi besoin du script <filename>winbind</filename> pour résoudre les
 		  noms depuis les clients Windows, lancez:</para>

Modified: trunk/blfs/networking/netutils/avahi.xml
===================================================================
--- trunk/blfs/networking/netutils/avahi.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/networking/netutils/avahi.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -3,7 +3,7 @@
    "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../../general.ent">
   %general-entities;
-  <!ENTITY avahi-download-http "&fedora-http-repo;/avahi/avahi-&avahi-version;.tar.gz/&avahi-md5sum;/avahi-&avahi-version;.tar.gz">
+  <!ENTITY avahi-download-http "http://avahi.org/download/avahi-&avahi-version;.tar.gz">
   <!ENTITY avahi-download-ftp  " ">
   <!ENTITY avahi-md5sum        "2f22745b8f7368ad5a0a3fddac343f2d">
   <!ENTITY avahi-size          "1.3 Mo">
@@ -76,8 +76,7 @@
     <systemitem class="username">root</systemitem> :</para>
 <screen role="root">
 <userinput>groupadd -fg 84 avahi &&
-useradd -c "Avahi Daemon Owner" -d /var/run/avahi-daemon -u 84 \
-        -g avahi -s /bin/false avahi</userinput>
+useradd -c "Avahi Daemon Owner" -d /var/run/avahi-daemon -u 84         -g avahi -s /bin/false avahi</userinput>
 </screen>
     <para>Il doit y avoir un groupe d'accès dédiés pour les clients
     <application>Avahi</application> . Taper les commandes suivantes en tant
@@ -88,21 +87,9 @@
     <para>Installez <application>avahi</application> en lançant les commandes 
     suivantes:</para>
 <screen>
-<userinput>sed -i 's/\(CFLAGS=.*\)-Werror \(.*\)/\1\2/' configure &&
-sed -i -e 's/-DG_DISABLE_DEPRECATED=1//' \
- -e '/-DGDK_DISABLE_DEPRECATED/d' avahi-ui/Makefile.in &&
-./configure --prefix=/usr        \
-            --sysconfdir=/etc    \
-            --localstatedir=/var \
-            --disable-static     \
-            --disable-mono       \
-            --disable-monodoc    \
-            --disable-python     \
-            --disable-qt3        \
-            --disable-qt4        \
-            --enable-core-docs   \
-            --with-distro=none   \
-            --with-systemdsystemunitdir=no &&
+<userinput>sed -i 's/(CFLAGS=.*)-Werror (.*)/12/' configure &&
+sed -i -e 's/-DG_DISABLE_DEPRECATED=1//'  -e '/-DGDK_DISABLE_DEPRECATED/d' avahi-ui/Makefile.in &&
+./configure --prefix=/usr                    --sysconfdir=/etc                --localstatedir=/var             --disable-static                 --disable-mono                   --disable-monodoc                --disable-python                 --disable-qt3                    --disable-qt4                    --enable-core-docs               --with-distro=none               --with-systemdsystemunitdir=no &&
 make</userinput>
 </screen>
     <para>Ce paquet n'est pas livré avec une suite de tests.</para>

Modified: trunk/blfs/networking/netutils/mod_dnssd.xml
===================================================================
--- trunk/blfs/networking/netutils/mod_dnssd.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/networking/netutils/mod_dnssd.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -3,7 +3,7 @@
    "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../../general.ent">
   %general-entities;
-  <!ENTITY mod_dnssd-download-http "&fedora-http-repo;/mod_dnssd/mod_dnssd-&mod_dnssd-version;.tar.gz/&mod_dnssd-md5sum;/mod_dnssd-&mod_dnssd-version;.tar.gz">
+  <!ENTITY mod_dnssd-download-http "http://0pointer.de/lennart/projects/mod_dnssd/mod_dnssd-&mod_dnssd-version;.tar.gz">
   <!ENTITY mod_dnssd-download-ftp  " ">
   <!ENTITY mod_dnssd-md5sum        "bed3d95a98168bf0515922d1c05020c5">
   <!ENTITY mod_dnssd-size          "84 Ko">
@@ -64,8 +64,7 @@
     suivantes:</para>
 <screen>
 <userinput>sed -i 's/unixd_setup_child/ap_&/' src/mod_dnssd.c &&
-./configure --prefix=/usr \
-            --disable-lynx &&
+./configure --prefix=/usr             --disable-lynx &&
 make</userinput>
 </screen>
     <para>Ce paquet n'est pas livré avec une suite de tests.</para>

Modified: trunk/blfs/packages.ent
===================================================================
--- trunk/blfs/packages.ent	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/packages.ent	2015-01-18 20:30:47 UTC (rev 6727)
@@ -1,4 +1,4 @@
-<!-- $LastChangedBy: fernando $ $Date: 2015-01-10 18:38:25 +0100 (sam. 10 janv. 2015) $ -->
+<!-- $LastChangedBy: igor $ $Date: 2015-01-18 19:30:49 +0100 (dim. 18 janv. 2015) $ -->
 <!-- Part II -->
 <!-- Chapter 3 -->
 <!ENTITY initd-tools-version          "0.1.3">
@@ -10,7 +10,7 @@
 <!ENTITY cracklib-version             "2.9.2">
 <!ENTITY cyrus-sasl-version           "2.1.26">
 <!ENTITY gnupg2-version               "2.0.26">
-<!ENTITY gnutls-version               "3.3.11">
+<!ENTITY gnutls-version               "3.3.12">
 <!ENTITY gpgme-version                "1.5.3">
 <!ENTITY haveged-version              "1.9.1">
 <!ENTITY iptables-version             "1.4.21">
@@ -104,7 +104,7 @@
 <!ENTITY libglade-version             "2.6.4">
 <!ENTITY libgpg-error-version         "1.17">
 <!ENTITY libgsf-version               "1.14.30">
-<!ENTITY libgusb-version              "0.2.3">
+<!ENTITY libgusb-version              "0.2.4">
 <!ENTITY libical-version              "1.0.1">
 <!ENTITY libidn-version               "1.29">
 <!ENTITY libiodbc-version             "3.52.9">
@@ -190,13 +190,12 @@
 <!ENTITY time-version                 "1.7">
 <!ENTITY tree-version                 "1.7.0">
 <!ENTITY unixodbc-version             "2.3.2">
-<!ENTITY xscreensaver-version         "5.32">
 <!-- Chapter 12 -->
 <!ENTITY acpid-version                "2.0.23">
 <!ENTITY at-version                   "3.1.16">
 <!ENTITY autofs-version               "5.1.0">
 <!ENTITY bluez-version                "5.27">
-<!ENTITY colord-version               "1.2.7">    <!-- Even minors only -->
+<!ENTITY colord-version               "1.2.8">    <!-- Even minors only -->
 <!ENTITY cpio-version                 "2.11">
 <!ENTITY dbus-version                 "1.8.14">   <!-- Even minors only -->
 <!ENTITY eudev-version                "1.7">
@@ -220,7 +219,7 @@
 <!ENTITY sysstat-version              "11.1.2">
 <!ENTITY udisks-version               "1.0.5">    <!-- stable lt .90 micro version -->
 <!ENTITY udisks2-version              "2.1.4">    <!-- stable lt .90 micro version -->
-<!ENTITY unrar-version                "5.2.3">
+<!ENTITY unrar-version                "5.2.4">
 <!ENTITY unzip-version                "6.0">
 <!ENTITY upower-version               "0.9.23">
 <!ENTITY usbutils-version             "008">
@@ -240,11 +239,11 @@
 <!ENTITY expect-version               "5.45">
 <!ENTITY gcc-version                  "4.9.2">
 <!ENTITY gc-version                   "7.4.2">
-<!ENTITY gdb-version                  "7.8.1">
-<!ENTITY git-version                  "2.2.1">
+<!ENTITY gdb-version                  "7.8.2">
+<!ENTITY git-version                  "2.2.2">
 <!ENTITY guile-version                "2.0.11">
 <!ENTITY librep-version               "0.92.4">
-<!ENTITY llvm-version                 "3.5.0">
+<!ENTITY llvm-version                 "3.5.1">
 <!ENTITY lua-version                  "5.2.3">
 <!ENTITY mercurial-version            "3.2.4">
 <!ENTITY nasm-version                 "2.11.06">
@@ -257,11 +256,11 @@
 <!ENTITY scons-version                "2.3.4">
 <!ENTITY slang-version                "2.2.4">
 <!ENTITY subversion-version           "1.8.11">
-<!ENTITY swig-version                 "3.0.2">
+<!ENTITY swig-version                 "3.0.4">
 <!ENTITY tcl-version                  "8.6.3">
 <!ENTITY tk-version                   "8.6.3">
 <!ENTITY vala-major-version           "0.26">  <!-- even minors only -->
-<!ENTITY vala-version                 "&vala-major-version;.1">
+<!ENTITY vala-version                 "&vala-major-version;.2">
 <!ENTITY valgrind-version             "3.10.1">
 <!ENTITY yasm-version                 "1.3.0">
 <!ENTITY apache-ant-version           "1.9.4">
@@ -325,7 +324,7 @@
 <!ENTITY ntp-version                  "4.2.8">
 <!ENTITY rpcbind-version              "0.2.2">
 <!ENTITY rsync-version                "3.1.1">
-<!ENTITY samba-version                "4.1.14">
+<!ENTITY samba-version                "4.1.16">
 <!ENTITY wget-version                 "1.16.1">
 <!ENTITY wireless-tools-version       "29">
 <!ENTITY wpa_supplicant-version       "2.3">
@@ -381,7 +380,7 @@
 <!ENTITY db-version                   "6.1.19">
 <!ENTITY mariadb-version              "10.0.15">
 <!ENTITY postgresql-version           "9.4.0">
-<!ENTITY sqlite-version               "3.8.7.4">
+<!ENTITY sqlite-version               "3.8.8">
 <!-- Chapter 23 -->
 <!ENTITY openldap-version             "2.4.40">
 <!ENTITY soprano-version              "2.9.4">
@@ -400,7 +399,7 @@
 <!ENTITY xbitmaps-version             "1.1.1">
 <!ENTITY xcursor-themes-version       "1.0.4">
 <!ENTITY xkeyboard-config-version     "2.13">
-<!ENTITY mesalib-version              "10.4.1">
+<!ENTITY mesalib-version              "10.4.2">
 <!ENTITY xcb-util-version             "0.4.0">
 <!ENTITY xcb-util-image-version       "0.4.0">
 <!ENTITY xcb-util-keysyms-version     "0.4.0">
@@ -429,7 +428,7 @@
 <!ENTITY glu-version                  "9.0.0">
 <!ENTITY goffice010-version           "0.10.18">
 <!ENTITY gtk2-version                 "2.24.25">
-<!ENTITY gtk3-version                 "3.14.6">
+<!ENTITY gtk3-version                 "3.14.7">
 <!ENTITY gtk-engines-version          "2.20.2">
 <!ENTITY gtkmm2-version               "2.24.4">
 <!ENTITY gtkmm3-version               "3.14.0">
@@ -444,7 +443,7 @@
 <!ENTITY shared-mime-info-version     "1.3">
 <!ENTITY startup-notification-version "0.12">
 <!ENTITY webkitgtk2-version           "2.4.8">    <!-- Even minors only -->
-<!ENTITY webkitgtk26-version          "2.6.4">    <!-- Even minors only -->
+<!ENTITY webkitgtk26-version          "2.6.5">    <!-- Even minors only -->
 <!ENTITY gtk2-libdir                  "2.0/2.10.0">
 <!ENTITY qt4-dir                      "$QT4DIR">
 <!-- Chapter 26 -->
@@ -539,9 +538,10 @@
 <!ENTITY libreoffice-patch            ".2">
 <!ENTITY libreoffice-dlversion        "&libreoffice-version;&libreoffice-patch;">
 <!-- Chapter 35 -->
-<!ENTITY seamonkey-version            "2.31">
-<!ENTITY firefox-version              "34.0.5">
+<!ENTITY seamonkey-version            "2.32">
+<!ENTITY firefox-version              "35.0">
 <!-- Chapter 36 -->
+<!ENTITY asymptote-version            "2.32">
 <!ENTITY balsa-version                "2.5.1">
 <!ENTITY ekiga-version                "4.0.1">
 <!ENTITY feh-version                  "2.12">
@@ -556,11 +556,12 @@
 <!ENTITY pidgin-version               "2.10.11">
 <!ENTITY rox-filer-version            "2.11">
 <!ENTITY rxvt-unicode-version         "9.21">
-<!ENTITY thunderbird-version          "31.3.0">
+<!ENTITY thunderbird-version          "31.4.0">
 <!ENTITY tigervnc-version             "1.3.1">
 <!ENTITY transmission-version         "2.84">
 <!ENTITY xchat-version                "2.8.8">
 <!ENTITY xdg-utils-version            "1.1.0-rc3">
+<!ENTITY xscreensaver-version         "5.32">
 <!-- Part XI -->
 <!-- Chapter 37 -->
 <!ENTITY alsa-download-http           "http://alsa.cybermirror.org">
@@ -641,7 +642,7 @@
 <!ENTITY amarok-version               "2.8.0">
 <!ENTITY pnmixer-version              "0.5.1">
 <!-- Chapter 40 -->
-<!ENTITY ffmpeg-version               "2.5.2">
+<!ENTITY ffmpeg-version               "2.5.3">
 <!ENTITY mplayer-version              "2014-12-19">
 <!ENTITY xine-ui-version              "0.99.9">
 <!ENTITY transcode-version            "1.1.7">
@@ -657,7 +658,7 @@
 <!-- Part XII -->
 <!-- Chapter 42 -->
 <!ENTITY cups-version                 "2.0.1">
-<!ENTITY cups-filters-version         "1.0.61">
+<!ENTITY cups-filters-version         "1.0.62">
 <!ENTITY gs-version                   "9.15">
 <!ENTITY gutenprint-version           "5.2.10">
 <!-- Chapter 43 -->
@@ -688,7 +689,9 @@
 <!-- Chapter 47 -->
 <!ENTITY texlive-version              "20140525">
 <!-- the year is used when setting up PATHs in the tl-installer
- page, as well as to reference the directory in texlive -->
+ page, as well as to reference the directory in texlive, also
+ in asymptote (above) and xindy -->
 <!ENTITY texlive-year                 "2014">
 <!ENTITY biber-version                "1.9">
 <!ENTITY biblatex-version             "2.9">
+<!ENTITY xindy-version                "2.5.1">

Modified: trunk/blfs/postlfs/security/gnutls.xml
===================================================================
--- trunk/blfs/postlfs/security/gnutls.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/postlfs/security/gnutls.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -5,10 +5,10 @@
   %general-entities;
   <!ENTITY gnutls-download-http " ">
   <!ENTITY gnutls-download-ftp  "ftp://ftp.gnutls.org/gcrypt/gnutls/v3.3/gnutls-&gnutls-version;.tar.xz">
-  <!ENTITY gnutls-md5sum        "b657e3010c10cae2244e7ce79ee3d446">
-  <!ENTITY gnutls-size          "5.9 Mo">
-  <!ENTITY gnutls-buildsize     "107 Mo (additional 8 Mo for the tests)">
-  <!ENTITY gnutls-time          "1 SBU (additional 2 SBU for the tests)">
+  <!ENTITY gnutls-md5sum        "a37b20b4352a5f542367ded904729c90">
+  <!ENTITY gnutls-size          "6 Mo">
+  <!ENTITY gnutls-buildsize     "106 Mo (additional 8 Mo for the tests)">
+  <!ENTITY gnutls-time          "0.9 SBU (additional 2 SBU for the tests)">
 ]>
 <sect1 id="gnutls" xreflabel="GnuTLS-&gnutls-version;">
   <?dbhtml filename="gnutls.html"?>
@@ -91,8 +91,7 @@
     <para>Installez <application>GnuTLS</application> en lançant les commandes
     suivantes :</para>
 <screen>
-<userinput>./configure --prefix=/usr \
-            --with-default-trust-store-file=/etc/ssl/ca-bundle.crt &&
+<userinput>./configure --prefix=/usr             --with-default-trust-store-file=/etc/ssl/ca-bundle.crt &&
 make</userinput>
 </screen>
     <para>Pour tester les résultats, lancez : <command>make check</command>.</para>

Modified: trunk/blfs/pst/printing/cups-filters.xml
===================================================================
--- trunk/blfs/pst/printing/cups-filters.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/pst/printing/cups-filters.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -4,9 +4,9 @@
   <!ENTITY % general-entities SYSTEM "../../general.ent">
   %general-entities;
   <!ENTITY cups-filters-download-http
-  "http://www.openprinting.org/download/cups-filters/cups-filters-&cups-filters-version;.tar.xz">
+  "https://www.openprinting.org/download/cups-filters/cups-filters-&cups-filters-version;.tar.xz">
   <!ENTITY cups-filters-download-ftp  " ">
-  <!ENTITY cups-filters-md5sum        "f16a422bf3135e90b83f969c13a259cf">
+  <!ENTITY cups-filters-md5sum        "6d33aa35f77bc89bec028799bf4d7314">
   <!ENTITY cups-filters-size          "1.3 Mo">
   <!ENTITY cups-filters-buildsize     "33 Mo (additional 2 Mo for the tests)">
   <!ENTITY cups-filters-time          "0.4 SBU">
@@ -102,14 +102,7 @@
       commands:
     </para>
 <screen>
-<userinput>./configure --prefix=/usr                               \
-            --sysconfdir=/etc                           \
-            --localstatedir=/var                        \
-            --docdir=/usr/share/doc/cups-filters-&cups-filters-version; \
-            --without-rcdir                             \
-            --with-gs-path=/usr/bin/gs                  \
-            --with-pdftops-path=/usr/bin/gs             \
-            --disable-static                            &&
+<userinput>./configure --prefix=/usr                                           --sysconfdir=/etc                                       --localstatedir=/var                                    --docdir=/usr/share/doc/cups-filters-&cups-filters-version;             --without-rcdir                                         --with-gs-path=/usr/bin/gs                              --with-pdftops-path=/usr/bin/gs                         --disable-static                            &&
 make</userinput>
 </screen>
     <para>

Modified: trunk/blfs/pst/typesetting/texlive-pass1.xml
===================================================================
(Binary files differ)

Modified: trunk/blfs/pst/typesetting/texlive.xml
===================================================================
--- trunk/blfs/pst/typesetting/texlive.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/pst/typesetting/texlive.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -1,87 +1,143 @@
-<?xml version="1.0" encoding="UTF-8"?>
+<?xml version="1.0" encoding="ISO-8859-1"?>
 <!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
    "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../../general.ent">
   %general-entities;
-  <!ENTITY texlive-source-download-http " ">
-  <!ENTITY texlive-source-download-ftp  "ftp://tug.org/texlive/historic/&texlive-year;/texlive-&texlive-version;-source.tar.xz">
-  <!ENTITY texlive-source-md5sum        "09ee265ff51637827559affc7304078c">
-  <!ENTITY texlive-source-size          "40 Mo">
-  <!ENTITY texlive-buildsize            "923 Mo (if starting from pass 1)">
-  <!ENTITY texlive-time                 "9.0 SBU">
+
+  <!ENTITY texlive-download-http " ">
+  <!ENTITY texlive-download-ftp  "ftp://tug.org/texlive/historic/&texlive-year;/texlive-&texlive-version;-source.tar.xz">
+  <!ENTITY texlive-md5sum        "09ee265ff51637827559affc7304078c">
+  <!ENTITY texlive-size          "40 Mo">
+
+  <!ENTITY texlive-buildsize      "3.6 GB including the additional download">
+  <!ENTITY texlive-time           "8.2 SBU including the additional download">
+
+  <!ENTITY texlive-texmf-download-http " ">
+  <!ENTITY texlive-texmf-download-ftp  "ftp://tug.org/texlive/historic/&texlive-year;/texlive-&texlive-version;-texmf.tar.xz">
+  <!ENTITY texlive-texmf-md5sum        "645a6f1d3a0ef4a9c279dae02588eab7">
+  <!ENTITY texlive-texmf-size          "1.7 GB">
+
 ]>
-<sect1 id="texlive" xreflabel="TeX-Live-&texlive-version;-source">
+
+
+<sect1 id="texlive" xreflabel="texlive-&texlive-version;">
   <?dbhtml filename="texlive.html"?>
+
   <sect1info>
-    <othername>$LastChangedBy : bdubbs $</othername>
-    <date>$Date : 2012-09-22 18:38:01 +0200 (Sat, 22 Sep 2012) $</date>
+    <othername>$LastChangedBy: ken $</othername>
+    <date>$Date: 2015-01-11 22:13:35 +0100 (dim. 11 janv. 2015) $</date>
   </sect1info>
-  <title>TeX-Live-&texlive-version;</title>
+
+  <title>texlive-&texlive-version;-source</title>
+
   <indexterm zone="texlive">
     <primary sortas="a-texlive">texlive</primary>
   </indexterm>
+
   <sect2 role="package">
-    <title>Introduction à TeX Live depuis les sources</title>
-    <para>Après l'installation d'une construction partiel de Tex (ou alternativement une installation
-    de la version binaire), ici nous construirons tous Tex Live depuis les sources (excepté <application>biber</application>
-     qui n'est pas founie dans l'archive des sources et devra être traité séparément).
-    </para>
-   &lfs76_checked;
-    <bridgehead renderas="sect3">Informations sur le paquet</bridgehead>
+    <title>Introduction à TeX Live from source</title>
+
+    <para>Most of TeX Live can be built from source without a pre-existing
+    installation, but <application>xindy</application> (for indexing) needs
+    working versions of <command>latex</command> et <command>pdflatex</command>
+    when configure is run, et the testsuite et install for
+    <command>asy</command> (for vector graphics) will fail if TeX has not
+    already been installed. Additionally, <application>biber</application> is
+    not provided within the <application>texlive</application> source.</para>
+
+    <para>All of those packages are dealt with on their own pages et can be
+    built after installing this package et proceeding to
+    <xref linkend="tex-path"/>.</para>
+
+    &lfs76_checked;
+
+    <bridgehead renderas="sect3">Information sur le paquet </bridgehead>
     <itemizedlist spacing="compact">
       <listitem>
-        <para>Téléchargement (HTTP) : <ulink url="&texlive-source-download-http;"/></para>
+        <para>Téléchargement (HTTP) : <ulink url="&texlive-download-http;"/></para>
       </listitem>
       <listitem>
-        <para>Téléchargement (FTP) : <ulink url="&texlive-source-download-ftp;"/></para>
+        <para>Téléchargement (FTP) : <ulink url="&texlive-download-ftp;"/></para>
       </listitem>
       <listitem>
-        <para>Somme de contrôle MD5 du téléchargement : &texlive-source-md5sum;</para>
+        <para>Somme de contrôle MD5 du téléchargement : &texlive-md5sum;</para>
       </listitem>
       <listitem>
-        <para>Taille du téléchargement : &texlive-source-size;</para>
+        <para>Taille du téléchargement : &texlive-size;</para>
       </listitem>
       <listitem>
-        <para>Estimation de l'espace disque requis : &texlive-buildsize;</para>
+        <para>Estimation de l'espace disque requis : &texlive-buildsize;</para>
       </listitem>
       <listitem>
-        <para>Estimation du temps de construction : &texlive-time;</para>
+        <para>Estimation du temps de construction : &texlive-time;</para>
       </listitem>
     </itemizedlist>
-      
-    <bridgehead renderas="sect3">Dépendances de TeX Live</bridgehead>
-    <bridgehead renderas="sect4">Requises</bridgehead>
-    <para role="required">
-     Soit <xref linkend="texpass1"/> ou <xref linkend="tl-installer"/>
-       et  <xref linkend="clisp"/>
-      (pour construire <command>xindy</command> qui est un procésseur d'indexage pour la création
-       d'index multi-langage).
-    </para>
+
+    <bridgehead renderas="sect3">Required Additional Téléchargement</bridgehead>
+
+      <para>Much of the texlive environment (including scripts, documentation,
+      fonts et various other files) is not part of the source tarball. You must
+      download it separately. This will give you all of the additional files
+      which are provided by a full install of the binary version, there is no
+      realistic way to restrict which parts get installed.</para>
+
+      <para>
+        Because of the size of this package, it is unlikely to be mirrored by
+        BLFS mirrors.  In case of difficulty, go to http://www.ctan.org/mirrors/
+        to find a more-accessible mirror.
+      </para>
+
+    <itemizedlist spacing="compact">
+      <listitem>
+        <para>Téléchargement (FTP) : <ulink url="&texlive-texmf-download-ftp;"/></para>
+      </listitem>
+      <listitem>
+        <para>Somme de contrôle MD5 du téléchargement : &texlive-texmf-md5sum;</para>
+      </listitem>
+      <listitem>
+        <para>Taille du téléchargement : &texlive-texmf-size;</para>
+      </listitem>
+    </itemizedlist>
+
+    <bridgehead renderas="sect3">Dépendances de TeX Live from source</bridgehead>
+
     <bridgehead renderas="sect4">Recommandées</bridgehead>
     <para role="recommended">
-      <xref linkend="gs"/> (pour dvisvgm, utilisé par asymptote qui fournit une trousse à outils
-      mathématique orrientée coordonnées pour le dessin technique),
       <xref linkend="x-window-system"/>
     </para>
+
+    <!-- text for recommended libraries, shared with texlive itself -->
     <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
      href="../../xincludes/texrecommendlibs.xml"/>
+
     <bridgehead renderas="sect4">Facultative</bridgehead>
+    <!-- text for optional deps, shared with texlive itself -->
     <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
      href="../../xincludes/texoptional.xml"/>
-    <bridgehead renderas="sect4">Dépendances d'éxécution</bridgehead>
+
+    <bridgehead renderas="sect4">Runtime dependencies</bridgehead>
+    <!-- text for runtime deps, shared with tl-installer -->
     <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
      href="../../xincludes/texruntime.xml"/>
-    <para condition="html" role="usernotes">Notes utilisaeur:
+
+    <para condition="html" role="usernotes">Notes utilisateur :
     <ulink url="&blfs-wiki;/texlive"/></para>
+
   </sect2>
+
   <sect2 role="installation">
     <title>Installation de TeX Live</title>
-    <para>si vous avez démarré avec l'installateur binaire, ces instructions écraseront les programmes
-    installés.</para>
-<screen role="root">
-<userinput>export TEXARCH=$(uname -m | sed -e 's/i.86/i386/' -e 's/$/-linux/') &&
+
+    <para>
+      Install TeX Live by running the following  
+    </para>
+
+<!-- the configure switches should be identical to those in the
+ first part of texlive itself -->
+<screen role="root"><userinput>export TEXARCH=$(uname -m | sed -e 's/i.86/i386/' -e 's/$/-linux/') &&
 mkdir texlive-build &&
 cd texlive-build    &&
+
 ../configure                                        \
     --prefix=/opt/texlive/&texlive-year;                      \
     --bindir=/opt/texlive/&texlive-year;/bin/$TEXARCH         \
@@ -104,99 +160,101 @@
     --with-system-poppler                           \
     --with-system-xpdf                              \
     --with-system-zlib                              \
-    --with-banner-add=" - BLFS"                     \
-    --enable-xindy                                  \
-    --enable-xindy-rules                            \
-    --enable-xindy-doc                              \
-    --with-clisp-runtime=system</userinput>
-</screen>
-    <para>Asymptote a été configuré séparément. Il arrive avec sa propre copie des sources de gc, et utilisera seulement
-    la version système si les sources locales sont supprimées.
-    </para>
-<screen>
-<userinput>pushd ../utils/asymptote &&
-rm -v gc-7.4.0.tar.gz &&
-echo "ac_cv_lib_m_sqrt=yes"     >config.cache &&
-echo "ac_cv_lib_z_deflate=yes" >>config.cache &&
-./configure LIBS="-ltirpc "                         \
-    --prefix=/opt/texlive/&texlive-year;/                     \
-    --bindir=/opt/texlive/&texlive-year;/bin/$TEXARCH     \
-    --enable-texlive-build                          \
-    --datarootdir=/opt/texlive/&texlive-year;/texmf-dist      \
-    --infodir=/opt/texlive/&texlive-year;/texmf-dist/doc/info \
-    --mandir=/opt/texlive/&texlive-year;/texmf-dist/doc/man   \
-    --cache-file=config.cache && &&
-popd &&
+    --with-banner-add=" - BLFS" &&
 unset TEXARCH &&
-make &&
-make -C ../utils/asymptote</userinput>
-</screen>
-     <para>Pour tester les résultats, lancez :  <command>make -k chec &&
-     make -C utils/asymptote check</command>.</para>
-  
-    <para>Si vous avez utilisez l'installateur binaire, vous devrez faire une installation complète.
-     En tant qu'utilisateur <systemitem class="username">root</systemitem>:</para>
-<screen>
-<userinput role="nodump">make install &&
-make -C ../utils/asymptote install</userinput>
-</screen>
-    <para>Pour les gens qui ont suivi le chemin LFS et construit depuis les souces il est seulement
-     nécessaire d'installer <application>xindy</application> et
-    <application>asy</application>, alors, en tant qu'utilisateur
-    <systemitem class="username">root</systemitem>:</para>
-<screen>
-<userinput role="root">make -C utils/xindy install &&
-make -C ../utils/asymptote install</userinput>
-</screen>
-    <para>une partie du paquet demande à être reconstruite:
-    <xref linkend="biber"/>.</para>
-</sect2>
+
+make</userinput></screen>
+
+    <para>Pour tester le résultat, tapez : <command>make -k check</command>
+    One test in each of web2c, dvipng et ttf2pk2 will SKIP because kpathsea
+    has not yet been installed.</para>
+
+    <para>Now, as the <systemitem class="username">root</systemitem>
+    user:</para>
+
+<screen><userinput role="root">make install &&
+make texlinks</userinput></screen>
+
+    <para>And now, install the additional files as the
+    <systemitem class="username">root</systemitem> user:</para>
+
+<screen><userinput role="root">mkdir -pv /opt/texlive/&texlive-year; &&
+tar -xf texlive-&texlive-version;-texmf.tar.xz -C /opt/texlive/&texlive-year; --strip-components=1</userinput></screen>
+
+    <para>Now proceed to <xref linkend="tex-path"/>.</para>
+
+  </sect2>
+
   <sect2 role="commands">
     <title>Explications des commandes</title>
+
     <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
      href="../../xincludes/tex-prefix.xml"/>
+
     <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
      href="../../xincludes/tex-lib.xml"/>
+
     <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
       href="../../xincludes/static-libraries.xml"/>
+
     <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
       href="../../xincludes/tex-shared.xml"/>
+
     <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
       href="../../xincludes/tex-system.xml"/>
+
+<!--    <para>
+      <parameter>\-\-with-system-xpdf</parameter> : Uniquely, this parameter has
+      a non-standard meaning, it tells <command>configure</command> to use the
+      system-installed <application>poppler</application> headers et library.
+      Again, omit this if you have not installed
+      <application>poppler</application>.
+    </para> -->
     <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
       href="../../xincludes/tex-xpdf.xml"/>
+
     <para>
-      <parameter>echo "ac_cv_lib_m_sqrt=yes" ... LIBS="-ltirpc " >config.cache,
-      ... --cache-file=config.cache</parameter> : Les scripts configure dans
-      <application>TeX Live</application> sont rares. Asymptote ne doit pas seulement être configuré
-      et construit séparément, le script configure échoue à trouver la bibliothèque partagée
-      <filename class="libraryfile">libtirpc.so</filename>.  En passant cela dans 
-      LIBS casse les tests pour (statique) libm et (partagée) libz, alors nous avons corrigé cela, selon
-      la même façon que pour la compilation croisée.
+      <option>--without-x</option> : use this if you do not have Xorg installed.
     </para>
+
     <para>
-      <option>--without-x</option>: utilisez cela (et oubliez le configure et make dans
-      <filename>utils/asymptote</filename> si vous n'avez pas installé.
+      <parameter>make texlinks</parameter> : this runs the texlinks.sh script
+      to create (or recreate) symbolic links from formats to engines.  In
+      practice, several of the targets such as <command>xetex</command> are now
+      separate binaries et for these it will report "file already exists".
     </para>
+    <para>
+      <parameter>tar -xf texlive-&texlive-version;-texmf.tar.xz -C /opt/texlive/&texlive-year; --strip-components=1</parameter> :
+      the tarball contains the files for the texmf-dist directory, et because
+      of its size we do not want to waste time et space untarring it et then
+      copying the files.
+    </para>
+
   </sect2>
+
   <sect2 role="content">
     <title>Contenu</title>
+
     <segmentedlist>
       <segtitle>Programmes installés</segtitle>
-      <segtitle>Bibliothèque installée</segtitle>
+      <segtitle>Bibliothèques installées</segtitle>
       <segtitle>Répertoires installés</segtitle>
+
       <seglistitem>
-        <seg>plus de 300 binaires et liens symboliques vers des scripts</seg>
+        <seg>Over 300 binaries et symlinks to scripts</seg>
         <seg>libkpathsea.so, libptexenc.so</seg>
-        <seg>/opt/texlive, /usr/include/kpathsea, /usr/include/ptexenc</seg> 
+        <seg>/opt/texlive/&texlive-year;/bin, /opt/texlive/&texlive-year;/texmf-dist,
+        /usr/include/kpathsea, /usr/include/ptexenc</seg>
       </seglistitem>
     </segmentedlist>
+
     <variablelist>
-      <bridgehead renderas="sect3">Descriptions courtes</bridgehead>
+      <bridgehead renderas="sect3">Description courte</bridgehead>
       <?dbfo list-presentation="list"?>
       <?dbhtml list-presentation="table"?>
+
       <varlistentry id="texlive-programs">
-        <term><command>Programmes TeX</command></term>
+        <term><command>TeX programs</command></term>
         <listitem>
           <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
           href="../../xincludes/texprogs.xml"/>
@@ -205,22 +263,24 @@
           </indexterm>
         </listitem>
       </varlistentry>
+
       <varlistentry id="libkpathsea">
         <term><filename class="libraryfile">libkpathsea.so</filename></term>
         <listitem>
           <para>
-            (kpathsearch) existe pour regarder un fichier dans une liste de répertoires.
+            (kpathsearch) exists to look up a file in a list of directories.
           </para>
           <indexterm zone="texlive libkpathsea">
             <primary sortas="c-libkpathsea">libkpathsea.so</primary>
           </indexterm>
         </listitem>
       </varlistentry>
+
       <varlistentry id="libptexenc">
         <term><filename class="libraryfile">libptexenc.so</filename></term>
         <listitem>
           <para>
-            est une bibliothèque pour pTeX Japonnais (publication TeX).
+            is a library for Japanese pTeX (publishing TeX).
           </para>
           <indexterm zone="texlive libptexenc">
             <primary sortas="c-libptexenc">libptexenc.so</primary>
@@ -228,5 +288,7 @@
         </listitem>
       </varlistentry>
     </variablelist>
+
   </sect2>
+
 </sect1>

Modified: trunk/blfs/pst/typesetting/typesetting.xml
===================================================================
--- trunk/blfs/pst/typesetting/typesetting.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/pst/typesetting/typesetting.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -34,6 +34,5 @@
   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="tl-installer.xml"/>
 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="texlive-pass1.xml"/>
 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="tex-path.xml"/>
-  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="texlive.xml"/>
   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="biber.xml"/>
 </chapter>

Added: trunk/blfs/pst/typesetting/xindy.xml
===================================================================
(Binary files differ)

Index: trunk/blfs/pst/typesetting/xindy.xml
===================================================================
--- trunk/blfs/pst/typesetting/xindy.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/pst/typesetting/xindy.xml	2015-01-18 20:30:47 UTC (rev 6727)

Property changes on: trunk/blfs/pst/typesetting/xindy.xml
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/xml
\ No newline at end of property
Modified: trunk/blfs/server/databases/sqlite.xml
===================================================================
--- trunk/blfs/server/databases/sqlite.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/server/databases/sqlite.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -3,18 +3,18 @@
    "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../../general.ent">
   %general-entities;
-  <!ENTITY sqlite-dl-version    "3080704">
-  <!ENTITY sqlite-doc-version   "3080704">
+  <!ENTITY sqlite-dl-version    "3080800">
+  <!ENTITY sqlite-doc-version   "3080800">
   <!ENTITY sqlite-download-http
-           "http://sqlite.org/2014/sqlite-autoconf-&sqlite-dl-version;.tar.gz">
+           "https://sqlite.org/2015/sqlite-autoconf-&sqlite-dl-version;.tar.gz">
   <!ENTITY sqlite-download-ftp  " ">
-  <!ENTITY sqlite-md5sum        "33bb8db0038317ce1b0480ca1185c7ba">
+  <!ENTITY sqlite-md5sum        "3a3caebf93308ddf5d120c393d9ecb82">
   <!ENTITY sqlite-size          "2 Mo">
   <!ENTITY sqlite-buildsize     "17 Mo (additional 25 Mo for the Optional Documentation)">
   <!ENTITY sqlite-time          "0.2 SBU">
   <!ENTITY sqlite-docs-download
-           "http://sqlite.org/2014/sqlite-doc-&sqlite-doc-version;.zip">
-  <!ENTITY sqlite-docs-md5sum   "42560edd0f320e09cfff045ca4f6a281">
+           "https://sqlite.org/2015/sqlite-doc-&sqlite-doc-version;.zip">
+  <!ENTITY sqlite-docs-md5sum   "2eccef516e76f4e2c1584e725038c564">
   <!ENTITY sqlite-docs-size     "4.7 Mo">
 ]>
 <sect1 id="sqlite" xreflabel="SQLite-&sqlite-version;">
@@ -85,11 +85,7 @@
     <para>Installer <application>SQLite</application> en exécutant les commandes
     suivantes:</para>
 <screen>
-<userinput>./configure --prefix=/usr --disable-static        \
-            CFLAGS="-g -O2 -DSQLITE_ENABLE_FTS3=1 \
-            -DSQLITE_ENABLE_COLUMN_METADATA=1     \
-            -DSQLITE_ENABLE_UNLOCK_NOTIFY=1       \
-            -DSQLITE_SECURE_DELETE=1" &&
+<userinput>./configure --prefix=/usr --disable-static                    CFLAGS="-g -O2 -DSQLITE_ENABLE_FTS3=1             -DSQLITE_ENABLE_COLUMN_METADATA=1                 -DSQLITE_ENABLE_UNLOCK_NOTIFY=1                   -DSQLITE_SECURE_DELETE=1" &&
 make</userinput>
 </screen>
     <para>Ce paquet n'est pas livré avec une suite de tests.</para>

Modified: trunk/blfs/server/major/vsftpd.xml
===================================================================
--- trunk/blfs/server/major/vsftpd.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/server/major/vsftpd.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -3,8 +3,8 @@
    "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../../general.ent">
   %general-entities;
-  <!ENTITY vsftpd-download-http " ">
-  <!ENTITY vsftpd-download-ftp  "https://security.appspot.com/downloads/vsftpd-&vsftpd-version;.tar.gz">
+  <!ENTITY vsftpd-download-http "https://security.appspot.com/downloads/vsftpd-&vsftpd-version;.tar.gz">
+  <!ENTITY vsftpd-download-ftp  " ">
   <!ENTITY vsftpd-md5sum        "8b00c749719089401315bd3c44dddbb2">
   <!ENTITY vsftpd-size          "196 Ko">
   <!ENTITY vsftpd-buildsize     "1.8 Mo">

Added: trunk/blfs/traduc/commits/r15322.txt
===================================================================
--- trunk/blfs/traduc/commits/r15322.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15322.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,33 @@
+Révision 15322
+
+fichiers modifiés :
+   general.ent
+   packages.ent
+   general/genlib/libgusb.xml
+   introduction/welcome/changelog.xml
+
+Log :
+Update to libgusb-0.2.4.
+
+Le robot a traité 72 % du commit anglais
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15321)
++++ introduction/welcome/changelog.xml	(révision 15322)
+@@ -45,6 +45,16 @@
+ -->
+ 
+     <listitem>
++      <para>January 11th, 2015</para>
++      <itemizedlist>
++        <listitem>
++          <para>[fernando] - Update to libgusb-0.2.4. Fixes
++          <ulink url="&blfs-ticket-root;6022">#6022</ulink>.</para>
++        </listitem>
++      </itemizedlist>
++    </listitem>
++    <listitem>
+       <para>January 10th, 2015</para>
+       <itemizedlist>
+         <listitem>
+

Added: trunk/blfs/traduc/commits/r15323.txt
===================================================================
--- trunk/blfs/traduc/commits/r15323.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15323.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,27 @@
+Révision 15323
+
+fichiers modifiés :
+   packages.ent
+   general/sysutils/unrar.xml
+   introduction/welcome/changelog.xml
+
+Log :
+Update to unrarsrc-5.2.4.
+
+Le robot a traité 63 % du commit anglais
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15322)
++++ introduction/welcome/changelog.xml	(révision 15323)
+@@ -48,6 +48,10 @@
+       <para>January 11th, 2015</para>
+       <itemizedlist>
+         <listitem>
++          <para>[fernando] - Update to unrarsrc-5.2.4. Fixes
++          <ulink url="&blfs-ticket-root;6023">#6023</ulink>.</para>
++        </listitem>
++        <listitem>
+           <para>[fernando] - Update to libgusb-0.2.4. Fixes
+           <ulink url="&blfs-ticket-root;6022">#6022</ulink>.</para>
+         </listitem>
+

Added: trunk/blfs/traduc/commits/r15324.txt
===================================================================
--- trunk/blfs/traduc/commits/r15324.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15324.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,23 @@
+Révision 15324
+
+fichiers modifiés :
+   general/graphlib/poppler.xml
+
+Log :
+openjpeg2 is in the book
+
+Le robot a traité 0 % du commit anglais
+Index: general/graphlib/poppler.xml
+===================================================================
+--- general/graphlib/poppler.xml	(révision 15323)
++++ general/graphlib/poppler.xml	(révision 15324)
+@@ -131,7 +131,7 @@
+       <xref linkend="lcms"/> or <xref linkend="lcms2"/>,
+       <xref linkend="libtiff"/>,
+       <xref linkend="openjpeg"/> or
+-<ulink url="http://sourceforge.net/projects/openjpeg.mirror/files/">OpenJPEG2</ulink>
++      <xref linkend="openjpeg2"/>
+       (preference is for OpenJPEG1, due to regressions in OpenJPEG2),
+       <xref linkend="qt4"/> (the <filename>libpoppler-qt4.so</filename> library
+       is needed for PDF support in <application>Okular</application>), and
+

Added: trunk/blfs/traduc/commits/r15325.txt
===================================================================
--- trunk/blfs/traduc/commits/r15325.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15325.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,9 @@
+Révision 15325
+
+fichiers modifiés :
+   server/major/vsftpd.xml
+
+Log :
+vsftpd download url entity correction
+
+Le robot a traité 100 % du commit anglais

Added: trunk/blfs/traduc/commits/r15326.txt
===================================================================
--- trunk/blfs/traduc/commits/r15326.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15326.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,27 @@
+Révision 15326
+
+fichiers modifiés :
+   multimedia/videoutils/ffmpeg.xml
+   packages.ent
+   introduction/welcome/changelog.xml
+
+Log :
+Update to ffmpeg-2.5.3.
+
+Le robot a traité 68 % du commit anglais
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15325)
++++ introduction/welcome/changelog.xml	(révision 15326)
+@@ -48,6 +48,10 @@
+       <para>January 11th, 2015</para>
+       <itemizedlist>
+         <listitem>
++          <para>[fernando] - Update to ffmpeg-2.5.3. Fixes
++          <ulink url="&blfs-ticket-root;6025">#6025</ulink>.</para>
++        </listitem>
++        <listitem>
+           <para>[fernando] - Update to unrarsrc-5.2.4. Fixes
+           <ulink url="&blfs-ticket-root;6023">#6023</ulink>.</para>
+         </listitem>
+

Added: trunk/blfs/traduc/commits/r15327.txt
===================================================================
--- trunk/blfs/traduc/commits/r15327.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15327.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,314 @@
+Révision 15327
+
+fichiers ajoutés :
+   xsoft/other/asymptote.xml
+   pst/typesetting/xindy.xml
+
+fichiers modifiés :
+   xsoft/other/other.xml
+   packages.ent
+   pst/printing/gs.xml
+   pst/typesetting/tex-path.xml
+   pst/typesetting/typesetting.xml
+   pst/typesetting/texlive-pass1.xml
+   introduction/welcome/changelog.xml
+
+Log :
+Add separate asymptote and indy. Various consistency edits and rephrasing Texlive pass 1 now describes itself as just texlive from source, the original texlive page is no longer rendered : I will archive the latter and then rename the pass1 file in later commits, then look at what might optionally xref to the binary page.
+
+Le robot a traité 62 % du commit anglais
+
+ATTENTION : il faut relire les fichiers suivants qui sont ajoutés
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15326)
++++ introduction/welcome/changelog.xml	(révision 15327)
+@@ -48,6 +48,14 @@
+       <para>January 11th, 2015</para>
+       <itemizedlist>
+         <listitem>
++          <para>[ken] - Separate asymptote and xindy from texlive.
++          Note that xindy does not at the moment work on i686. Remove
++          the second build of texlive.  Fixes
++          <ulink url="&blfs-ticket-root;5956">#5956</ulink>
++          and partly addresses
++          <ulink url="&blfs-ticket-root;5926">#5926</ulink>.</para>
++        </listitem>
++        <listitem>
+           <para>[fernando] - Update to ffmpeg-2.5.3. Fixes
+           <ulink url="&blfs-ticket-root;6025">#6025</ulink>.</para>
+         </listitem>
+
+Index: packages.ent
+===================================================================
+--- packages.ent	(révision 15326)
++++ packages.ent	(révision 15327)
+@@ -746,8 +747,10 @@
+ <!-- Chapter 47 -->
+ <!ENTITY texlive-version              "20140525">
+ <!-- the year is used when setting up PATHs in the tl-installer
+-page, as well as to reference the directory in texlive -->
++ page, as well as to reference the directory in texlive, also
++ in asymptote (above) and xindy -->
+ <!ENTITY texlive-year                 "2014">
+ <!ENTITY biber-version                "1.9">
+ <!ENTITY biblatex-version             "2.9">
+
+Index: pst/printing/gs.xml
+===================================================================
+--- pst/printing/gs.xml	(révision 15326)
++++ pst/printing/gs.xml	(révision 15327)
+@@ -181,7 +181,8 @@
+     <note>
+       <para>
+         The shared library depends on <xref linkend="gtk2"/>. It is only used in
+-external programs like <xref linkend="imagemagick"/>.
++        external programs like <xref linkend="asymptote"/> and
++        <xref linkend="imagemagick"/>.
+       </para>
+     </note>
+ 
+
+Index: pst/typesetting/texlive-pass1.xml
+===================================================================
+--- pst/typesetting/texlive-pass1.xml	(révision 15326)
++++ pst/typesetting/texlive-pass1.xml	(révision 15327)
+@@ -21,57 +20,56 @@
+ ]>
+ 
+ 
+-<sect1 id="texpass1" xreflabel="texlive-&texlive-version;-source pass 1">
+-<?dbhtml filename="texlive-pass1.html"?>
++<sect1 id="texlive" xreflabel="texlive-&texlive-version;">
++  <?dbhtml filename="texlive.html"?>
+ 
+   <sect1info>
+     <othername>$LastChangedBy$</othername>
+     <date>$Date$</date>
+   </sect1info>
+ 
+-<title>texlive-&texlive-version;-source pass 1</title>
++  <title>texlive-&texlive-version;-source</title>
+ 
+-<indexterm zone="texpass1">
+-<primary sortas="a-texpass1">texlive-pass-1</primary>
++  <indexterm zone="texlive">
++    <primary sortas="a-texlive">texlive</primary>
+   </indexterm>
+ 
+   <sect2 role="package">
+-<title>Introduction to TeX Live from source, pass 1</title>
++    <title>Introduction to TeX Live from source</title>
+ 
+-<para>Most of TeX Live can be built from source without difficulty.
+-However, <application>xindy</application> (for indexing) needs working
+-versions of <command>latex</command> and <command>pdflatex</command>
+-when configure is run, and the testsuite for <command>asy</command>
+-(for vector graphics) will fail if TeX has not already been installed.
+-</para>
++    <para>Most of TeX Live can be built from source without a pre-existing
++    installation, but <application>xindy</application> (for indexing) needs
++    working versions of <command>latex</command> and <command>pdflatex</command>
++    when configure is run, and the testsuite and install for
++    <command>asy</command> (for vector graphics) will fail if TeX has not
++    already been installed. Additionally, <application>biber</application> is
++    not provided within the <application>texlive</application> source.</para>
+ 
+-<para>In addition, it is necessary to create various symlinks at the end of
+-this install.</para>
++    <para>All of those packages are dealt with on their own pages and can be
++    built after installing this package and proceeding to
++    <xref linkend="tex-path"/>.</para>
+ 
+-<para>We can later rebuild texlive in <xref linkend="texlive"/> to include
+-xindy. There we will install xindy and also build and install asy.</para>
+     &lfs76_checked;
+ 
+     <bridgehead renderas="sect3">Package Information</bridgehead>
+     <itemizedlist spacing="compact">
+       <listitem>
+-<para>Download (HTTP): <ulink url="&texlive-pass1-download-http;"/></para>
++        <para>Download (HTTP): <ulink url="&texlive-download-http;"/></para>
+       </listitem>
+       <listitem>
+-<para>Download (FTP): <ulink url="&texlive-pass1-download-ftp;"/></para>
++        <para>Download (FTP): <ulink url="&texlive-download-ftp;"/></para>
+       </listitem>
+       <listitem>
+-<para>Download MD5 sum: &texlive-pass1-md5sum;</para>
++        <para>Download MD5 sum: &texlive-md5sum;</para>
+       </listitem>
+       <listitem>
+-<para>Download size: &texlive-pass1-size;</para>
++        <para>Download size: &texlive-size;</para>
+       </listitem>
+       <listitem>
+-<para>Estimated disk space required: &texlive-pass1-buildsize;</para>
++        <para>Estimated disk space required: &texlive-buildsize;</para>
+       </listitem>
+       <listitem>
+-<para>Estimated build time: &texlive-pass1-time;</para>
++        <para>Estimated build time: &texlive-time;</para>
+       </listitem>
+     </itemizedlist>
+ 
+@@ -101,7 +99,7 @@
+       </listitem>
+     </itemizedlist>
+ 
+-<bridgehead renderas="sect3">TeX Live from source pass 1 Dependencies</bridgehead>
++    <bridgehead renderas="sect3">TeX Live from source Dependencies</bridgehead>
+ 
+     <bridgehead renderas="sect4">Recommended</bridgehead>
+     <para role="recommended">
+@@ -118,20 +116,20 @@
+      href="../../xincludes/texoptional.xml"/>
+ 
+     <bridgehead renderas="sect4">Runtime dependencies</bridgehead>
++    <!-- text for runtime deps, shared with tl-installer -->
+     <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+      href="../../xincludes/texruntime.xml"/>
+ 
+     <para condition="html" role="usernotes">User Notes:
+-<ulink url="&blfs-wiki;/texlive-pass1"/></para>
++    <ulink url="&blfs-wiki;/texlive"/></para>
+ 
+   </sect2>
+ 
+   <sect2 role="installation">
+-<title>Installation of TeX Live, pass 1</title>
++    <title>Installation of TeX Live</title>
+ 
+     <para>
+-Install TeX Live pass 1 by running the following commands:
++      Install TeX Live by running the following commands:
+     </para>
+ 
+ <!-- the configure switches should be identical to those in the
+@@ -255,36 +253,36 @@
+       <?dbfo list-presentation="list"?>
+       <?dbhtml list-presentation="table"?>
+ 
+-<varlistentry id="texpass1-programs">
++      <varlistentry id="texlive-programs">
+         <term><command>TeX programs</command></term>
+         <listitem>
+           <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+           href="../../xincludes/texprogs.xml"/>
+-<indexterm zone="texpass1 texpass1-programs">
+-<primary sortas="b-texpass1-programs">TeX Live programs</primary>
++          <indexterm zone="texlive texlive-programs">
++            <primary sortas="b-texlive-programs">TeX Live programs</primary>
+           </indexterm>
+         </listitem>
+       </varlistentry>
+ 
+-<varlistentry id="libkpathsea-texpass1">
++      <varlistentry id="libkpathsea">
+         <term><filename class="libraryfile">libkpathsea.so</filename></term>
+         <listitem>
+           <para>
+             (kpathsearch) exists to look up a file in a list of directories.
+           </para>
+-<indexterm zone="texpass1 libkpathsea">
++          <indexterm zone="texlive libkpathsea">
+             <primary sortas="c-libkpathsea">libkpathsea.so</primary>
+           </indexterm>
+         </listitem>
+       </varlistentry>
+ 
+-<varlistentry id="libptexenc-texpass1">
++      <varlistentry id="libptexenc">
+         <term><filename class="libraryfile">libptexenc.so</filename></term>
+         <listitem>
+           <para>
+             is a library for Japanese pTeX (publishing TeX).
+           </para>
+-<indexterm zone="texpass1 libptexenc">
++          <indexterm zone="texlive libptexenc">
+             <primary sortas="c-libptexenc">libptexenc.so</primary>
+           </indexterm>
+         </listitem>
+
+Index: pst/typesetting/tex-path.xml
+===================================================================
+--- pst/typesetting/tex-path.xml	(révision 15326)
++++ pst/typesetting/tex-path.xml	(révision 15327)
+@@ -46,10 +46,10 @@
+     /etc/profile</command>.</para>
+ 
+     <para>If you arrived here after installing the TeX Live binary and do not
+-wish to build from source, your installation is now complete. To continue
+-building from source, please procede to <xref linkend="texlive"/>.</para>
++    wish to build from source, your installation is now complete.</para>
+ 
+-<para>Alternatively, if you do not wish to install the programs for asy,
+-xindy, and biber (on a from-source build) you can stop here.</para>
++    <para>Alternatively, if this is a from-source build you can now install
++    <xref linkend="asymptote"/>, <xref linkend="biber"/> and <xref
++    linkend="xindy"/> if you wish.</para>
+ 
+ </sect1>
+
+Index: pst/typesetting/typesetting.xml
+===================================================================
+--- pst/typesetting/typesetting.xml	(révision 15326)
++++ pst/typesetting/typesetting.xml	(révision 15327)
+@@ -28,28 +28,32 @@
+   linkend="tl-installer"/> instructions,. After installing, they can run
+   <command>tlmgr</command> to update their system.</para>
+ 
+-<para>Most people reading BLFS will wish to build from source. You can either
+-do as BLFS used to do, by starting with <application>install-tl-unx</application>,
+-or you can avoid the binary files completely and begin at
+-<xref linkend="texpass1"/> which will install most of
++  <para>Most people reading BLFS will wish to build from source. BLFS used to
++  start by installing <application>install-tl-unx</application> and then use that
++  to bootstrap the build.  Nowadays, we build almost the whole of
++  <application>texlive</application> <emphasis>without</emphasis> a binary install,
++  by adding the separately-packaged texmf files into this build.  For this, begin
++  at <xref linkend="texlive"/> which will install most of
+   <application>texlive</application>, together with <emphasis>all</emphasis> of the
+-supporting files. This almost-complete install is then used to build two
+-remaining parts of <application>texlive</application>, xindy and asy (that
+-involves recompiling all of the package, but not reinstalling all of it).</para>
++  supporting files. This almost-complete install can then be used to build the
++  remaining parts of <application>texlive</application>, <xref
++  linkend="asymptote"/>, <xref linkend="xindy"/> and <xref linkend="biber"/>.
++  </para>
+ 
+   <para>Because the texmf files (including documentation, fonts, scripts and
+   supporting files) are all in one tarball, it is not practical to limit what
+   gets extracted in a sensible way (e.g. to exclude one or other of the typesetting
+-engines).</para>
++  engines) when building from source in this manner.</para>
+ 
+-<para>After that, people building from source will wish to install <xref
+-linkend="biber"/>, which is supplied separately, to complete the full
+-installation.</para>
++  <para>In either case, BLFS installs into
++  <filename class="directory">/opt/texlive/&texlive-year;</filename> with the sole
++  exception of two libraries from the source install which are installed into
++  <filename class="directory">/usr/lib</filename> for convenience.</para>
+ 
+   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="tl-installer.xml"/>
+   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="texlive-pass1.xml"/>
+   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="tex-path.xml"/>
+   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="biber.xml"/>
++  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="xindy.xml"/>
+ 
+ </chapter>
+
+Index: xsoft/other/other.xml
+===================================================================
+--- xsoft/other/other.xml	(révision 15326)
++++ xsoft/other/other.xml	(révision 15327)
+@@ -18,6 +18,7 @@
+     <para>These programs use the X Window System and don't fit easily into any
+     of the other chapters.</para>
+ 
++  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="asymptote.xml"/>
+   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="balsa.xml"/>
+   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="ekiga.xml"/>
+   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="feh.xml"/>
+

Added: trunk/blfs/traduc/commits/r15328.txt
===================================================================
--- trunk/blfs/traduc/commits/r15328.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15328.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,14 @@
+Révision 15328
+
+fichiers supprimés :
+   pst/typesetting/texlive.xml
+
+fichiers ajoutés :
+   archive/texlive-source-full.xml
+
+Log :
+Archive the old texlive.xml page as texlive-source-full.
+
+Le robot a traité 100 % du commit anglais
+
+ATTENTION : il faut relire les fichiers suivants qui sont ajoutés

Added: trunk/blfs/traduc/commits/r15329.txt
===================================================================
--- trunk/blfs/traduc/commits/r15329.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15329.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,31 @@
+Révision 15329
+
+fichiers supprimés :
+   pst/typesetting/texlive-pass1.xml
+
+fichiers ajoutés :
+   pst/typesetting/texlive.xml
+
+fichiers modifiés :
+   pst/typesetting/typesetting.xml
+
+Log :
+rename texlive-pass1 as texlive
+
+Le robot a traité 97 % du commit anglais
+
+ATTENTION : il faut relire les fichiers suivants qui sont ajoutés
+Index: pst/typesetting/typesetting.xml
+===================================================================
+--- pst/typesetting/typesetting.xml	(révision 15328)
++++ pst/typesetting/typesetting.xml	(révision 15329)
+@@ -51,7 +51,7 @@
+   <filename class="directory">/usr/lib</filename> for convenience.</para>
+ 
+   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="tl-installer.xml"/>
+-<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="texlive-pass1.xml"/>
++  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="texlive.xml"/>
+   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="tex-path.xml"/>
+   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="biber.xml"/>
+   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="xindy.xml"/>
+

Added: trunk/blfs/traduc/commits/r15330.txt
===================================================================
--- trunk/blfs/traduc/commits/r15330.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15330.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,72 @@
+Révision 15330
+
+fichiers modifiés :
+   pst/typesetting/tl-installer.xml
+   x/installing/libvdpau-va-gl.xml
+   x/installing/libvdpau.xml
+   x/lib/fltk.xml
+   general/prog/llvm.xml
+   general/prog/doxygen.xml
+   general/prog/valgrind.xml
+   multimedia/videoutils/ffmpeg.xml
+   multimedia/libdriv/gstreamer.xml
+   multimedia/libdriv/libtheora.xml
+   multimedia/libdriv/libvorbis.xml
+
+Log :
+Remove redundant text from tl-installer (using the binary is no longer required), add first set of '(or install-tl-unx)' links to packages which have texlive as an optional dep.
+
+Le robot a traité 67 % du commit anglais
+Index: general/prog/doxygen.xml
+===================================================================
+--- general/prog/doxygen.xml	(révision 15329)
++++ general/prog/doxygen.xml	(révision 15330)
+@@ -95,7 +95,7 @@
+       <xref linkend="llvm"/> (with clang),
+       <xref linkend="python2"/> or <xref linkend="python3"/>,
+       <xref linkend="qt4"/> (for doxywizard),
+-<xref linkend="texlive"/>, and
++      <xref linkend="texlive"/> (or <xref linkend="tl-installer"/>) and
+       <xref linkend="xapian"/> (for doxyindexer)
+     </para>
+ 
+
+Index: multimedia/videoutils/ffmpeg.xml
+===================================================================
+--- multimedia/videoutils/ffmpeg.xml	(révision 15329)
++++ multimedia/videoutils/ffmpeg.xml	(révision 15330)
+@@ -135,6 +135,7 @@
+       <ulink url="http://opencv.org/">OpenCV</ulink>,
+       <ulink url="http://rtmpdump.mplayerhq.hu/">librtmp</ulink>,
+       <ulink url="http://diracvideo.org/">Schroedinger</ulink>,
++      <xref linkend="texlive"/> (or <xref linkend="tl-installer"/>) for PDF and PS documentation,
+       <ulink url="http://www.twolame.org/">TwoLAME</ulink>,
+       <ulink url="http://linuxtv.org/downloads/v4l-utils/">Video4Linux</ulink>,
+       <ulink url="http://sourceforge.net/projects/opencore-amr/files/vo-aacenc/">vo-aaenc</ulink>,
+
+Index: pst/typesetting/tl-installer.xml
+===================================================================
+--- pst/typesetting/tl-installer.xml	(révision 15329)
++++ pst/typesetting/tl-installer.xml	(révision 15330)
+@@ -38,14 +38,12 @@
+     of macros, fonts and documentation; and support for typesetting in many
+     different scripts from around the world.</para>
+ 
+-<para>It is necessary to use a binary installer for the first install.
+-This will provide the programs, the scripts, and a lot of supporting files
+-and documentation.  After that, you can rebuild the programs from source
+-by following the instructions for <xref linkend="texlive"/> and
+-<xref linkend="biber"/>.  The installer
+-is updated frequently, so its md5sum will change if it is newer than what
+-is shown below.  Newer versions of the installer are expected to work with
+-these instructions, for so long as they install to a
++    <para>This page is for people who wish to use the binary installer to
++    provide the programs, the scripts, and a lot of supporting files and
++    documentation.  The installer is updated frequently, so its md5sum will
++    change if it is newer than what is shown below.  Newer versions of the
++    installer are expected to work with these instructions, for so long as they
++    install to a
+     <filename class="directory">&texlive-year;/</filename> directory.</para>
+ 
+     &lfs76_checked;
+

Added: trunk/blfs/traduc/commits/r15331.txt
===================================================================
--- trunk/blfs/traduc/commits/r15331.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15331.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,62 @@
+Révision 15331
+
+fichiers modifiés :
+   general/genlib/libgcrypt.xml
+   general/genlib/libunistring.xml
+   general/genlib/libassuan.xml
+   general/graphlib/graphite2.xml
+   general/graphlib/fontconfig.xml
+   general/genutils/imagemagick.xml
+   general/sysutils/cpio.xml
+   pst/printing/gutenprint.xml
+
+Log :
+More 'texlive (or install-tl-unx)' links.
+
+Le robot a traité 61 % du commit anglais
+Index: general/genlib/libunistring.xml
+===================================================================
+--- general/genlib/libunistring.xml	(révision 15330)
++++ general/genlib/libunistring.xml	(révision 15331)
+@@ -60,7 +60,8 @@
+     <bridgehead renderas="sect3">libunistring Dependencies</bridgehead>
+ 
+     <bridgehead renderas="sect4">Optional</bridgehead>
+-<para role="optional"><xref linkend="texlive"/> (to rebuild the documentation)</para>
++    <para role="optional"><xref linkend="texlive"/> (or <xref linkend="tl-installer"/>)
++     (to rebuild the documentation)</para>
+ 
+     <para condition="html" role="usernotes">User Notes:
+     <ulink url="&blfs-wiki;/libunistring"/></para>
+
+Index: general/graphlib/graphite2.xml
+===================================================================
+--- general/graphlib/graphite2.xml	(révision 15330)
++++ general/graphlib/graphite2.xml	(révision 15331)
+@@ -104,7 +104,7 @@
+       require all of
+       <ulink url="http://www.methods.co.nz/asciidoc/">AsciiDoc</ulink>,
+       <xref linkend="doxygen"/> and
+-<xref linkend="texlive"/>.
++      <xref linkend="texlive"/> (or <xref linkend="tl-installer"/>)
+     </para>
+ 
+     <bridgehead renderas="sect4">Optional (at runtime)</bridgehead>
+
+Index: general/sysutils/cpio.xml
+===================================================================
+--- general/sysutils/cpio.xml	(révision 15330)
++++ general/sysutils/cpio.xml	(révision 15331)
+@@ -56,6 +56,13 @@
+       </listitem>
+     </itemizedlist>
+ 
++    <bridgehead renderas="sect3">CPIO Dependencies</bridgehead>
++    <bridgehead renderas="sect4">Optional</bridgehead>
++    <para role="optional">
++      <xref linkend="texlive"/> (or <xref linkend="tl-installer"/>)
++    </para>
+     <para condition="html" role="usernotes">User Notes:
+     <ulink url="&blfs-wiki;/cpio"/></para>
+ 
+

Added: trunk/blfs/traduc/commits/r15332.txt
===================================================================
--- trunk/blfs/traduc/commits/r15332.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15332.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,77 @@
+Révision 15332
+
+fichiers modifiés :
+   networking/mailnews/mutt.xml
+   postlfs/filesystems/parted.xml
+   postlfs/security/gnupg2.xml
+   gnome/applications/evince.xml
+   pst/scanning/sane.xml
+   pst/ps/a2ps.xml
+   pst/ps/enscript.xml
+   server/major/bind.xml
+
+Log :
+Final '(or install-tl-unx)' xrefs.
+
+Le robot a traité 48 % du commit anglais
+Index: postlfs/filesystems/parted.xml
+===================================================================
+--- postlfs/filesystems/parted.xml	(révision 15331)
++++ postlfs/filesystems/parted.xml	(révision 15332)
+@@ -80,6 +80,7 @@
+     <bridgehead renderas="sect4">Optional</bridgehead>
+     <para role="optional">
+       <xref linkend="pth"/>
++      <xref linkend="texlive"/> (or <xref linkend="tl-installer"/>)
+     </para>
+ 
+     <para condition="html" role="usernotes">
+
+Index: postlfs/security/gnupg2.xml
+===================================================================
+--- postlfs/security/gnupg2.xml	(révision 15331)
++++ postlfs/security/gnupg2.xml	(révision 15332)
+@@ -78,8 +78,9 @@
+     <xref linkend="libusb-compat"/>,
+     <xref linkend="curl"/>,
+     <ulink url="http://www.chiark.greenend.org.uk/~ian/adns/">GNU
+-adns</ulink>, and an
+-<xref linkend="server-mail"/></para>
++    adns</ulink>,  an
++    <xref linkend="server-mail"/>, and
++    <xref linkend="texlive"/> (or <xref linkend="tl-installer"/>)</para>
+ 
+     <para condition="html" role="usernotes">User Notes:
+     <ulink url="&blfs-wiki;/gnupg2"/></para>
+
+Index: pst/ps/enscript.xml
+===================================================================
+--- pst/ps/enscript.xml	(révision 15331)
++++ pst/ps/enscript.xml	(révision 15332)
+@@ -78,6 +78,13 @@
+       </listitem>
+     </itemizedlist> -->
+ 
++    <bridgehead renderas="sect3">Enscript Dependencies</bridgehead>
++    <bridgehead renderas="sect4">Optional</bridgehead>
++    <para role="optional">
++      <xref linkend="texlive"/> (or <xref linkend="tl-installer"/>)
++    </para>
+     <para condition="html" role="usernotes">User Notes:
+     <ulink url="&blfs-wiki;/Enscript"/></para>
+   </sect2>
+
+Index: server/major/bind.xml
+===================================================================
+--- server/major/bind.xml	(révision 15331)
++++ server/major/bind.xml	(révision 15332)
+@@ -96,7 +96,7 @@
+     <bridgehead renderas="sect4">Optional (to rebuild the documentation)</bridgehead>
+     <para role="optional">
+       <xref linkend="doxygen"/>,
+-<xref linkend="texlive"/>, and
++      <xref linkend="texlive"/> (or <xref linkend="tl-installer"/>), and
+       <xref linkend="libxslt"/>
+     </para>
+ 
+

Added: trunk/blfs/traduc/commits/r15333.txt
===================================================================
--- trunk/blfs/traduc/commits/r15333.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15333.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,42 @@
+Révision 15333
+
+fichiers modifiés :
+   x/lib/libnotify.xml
+   introduction/welcome/changelog.xml
+
+Log :
+libnotify no longer needs GTK
+
+Le robot a traité 3 % du commit anglais
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15332)
++++ introduction/welcome/changelog.xml	(révision 15333)
+@@ -67,6 +67,10 @@
+           <para>[fernando] - Update to libgusb-0.2.4. Fixes
+           <ulink url="&blfs-ticket-root;6022">#6022</ulink>.</para>
+         </listitem>
++        <listitem>
++          <para>[Chris] - Removed obsolete GTK 3 dependency from
++          libnotify.</para>
++        </listitem>
+       </itemizedlist>
+     </listitem>
+ 
+
+Index: x/lib/libnotify.xml
+===================================================================
+--- x/lib/libnotify.xml	(révision 15332)
++++ x/lib/libnotify.xml	(révision 15333)
+@@ -75,11 +75,6 @@
+ 
+     <bridgehead renderas="sect3">libnotify Dependencies</bridgehead>
+ 
+-<bridgehead renderas="sect4">Required</bridgehead>
+-<para role="required">
+-<xref linkend="gtk3"/>
+-</para>
+     <bridgehead renderas="sect4">Optional (Required if building GNOME)</bridgehead>
+     <para role="optional">
+       <xref linkend="gobject-introspection"/>
+

Added: trunk/blfs/traduc/commits/r15334.txt
===================================================================
--- trunk/blfs/traduc/commits/r15334.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15334.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,41 @@
+Révision 15334
+
+fichiers modifiés :
+   x/installing/mesalib.xml
+
+Log :
+Reworded explanations for mesa patch and mesa-demos
+
+Le robot a traité 0 % du commit anglais
+Index: x/installing/mesalib.xml
+===================================================================
+--- x/installing/mesalib.xml	(révision 15333)
++++ x/installing/mesalib.xml	(révision 15334)
+@@ -78,6 +78,10 @@
+         <para>
+           Recommended patch:
+           <ulink url="&patch-root;/MesaLib-&mesalib-version;-add_xdemos-1.patch"/>
++          (installs 2 demo programs for testing MesaLib - not needed if you
++          install the
++          <ulink url="ftp://ftp.freedesktop.org/pub/mesa/demos/">mesa-demos</ulink>
++          package)
+         </para>
+       </listitem>
+     </itemizedlist>
+@@ -103,12 +107,9 @@
+     <bridgehead renderas="sect4">Optional</bridgehead>
+     <para role="optional">
+       <ulink url="ftp://ftp.freedesktop.org/pub/mesa/demos/">mesa-demos</ulink>
+-provides more than 300 extra demos to test
+-<application>MesaLib</application>; two of them overwrites the ones
+-included by
+-<filename>MesaLib-&mesalib-version;-add_xdemos-1.patch</filename>;
+-to avoid that, install in a different prefix or add, e.g.
+-<option>--program-prefix=md</option> to configure, and
++      (provides more than 300 extra demos to test
++      <application>MesaLib</application>; this includes the same programs
++      added by the patch above), and
+       <ulink url="http://wayland.freedesktop.org/">Wayland</ulink>
+     </para>
+ 
+

Added: trunk/blfs/traduc/commits/r15335.txt
===================================================================
--- trunk/blfs/traduc/commits/r15335.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15335.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,44 @@
+Révision 15335
+
+fichiers modifiés :
+   general/genlib/libatasmart.xml
+   general/genlib/libdaemon.xml
+   networking/netutils/avahi.xml
+   networking/netutils/mod_dnssd.xml
+   multimedia/libdriv/libcanberra.xml
+   multimedia/libdriv/pulseaudio.xml
+
+Log :
+Simplify several urls
+
+Le robot a traité 66 % du commit anglais
+Index: multimedia/libdriv/libcanberra.xml
+===================================================================
+--- multimedia/libdriv/libcanberra.xml	(révision 15334)
++++ multimedia/libdriv/libcanberra.xml	(révision 15335)
+@@ -5,8 +5,7 @@
+   %general-entities;
+ 
+   <!ENTITY libcanberra-download-http
+-"&fedora-http-repo;/libcanberra/libcanberra-&libcanberra-version;.tar.xz/&libcanberra-md5sum;/libcanberra-&libcanberra-version;.tar.xz">
+-<!--"http://0pointer.de/lennart/projects/libcanberra/libcanberra-&libcanberra-version;.tar.xz">-->
++           "http://0pointer.de/lennart/projects/libcanberra/libcanberra-&libcanberra-version;.tar.xz">
+   <!ENTITY libcanberra-download-ftp  " ">
+   <!ENTITY libcanberra-md5sum        "34cb7e4430afaf6f447c4ebdb9b42072">
+   <!ENTITY libcanberra-size          "312 KB">
+
+Index: multimedia/libdriv/pulseaudio.xml
+===================================================================
+--- multimedia/libdriv/pulseaudio.xml	(révision 15334)
++++ multimedia/libdriv/pulseaudio.xml	(révision 15335)
+@@ -107,8 +107,7 @@
+       <xref linkend="valgrind"/>,
+       <ulink url="http://www.fftw.org/">FFTW</ulink>,
+       <ulink url="http://www.jackaudio.org/">JACK</ulink>,
+-<!--      <ulink url="http://0pointer.de/lennart/projects/libasyncns/">libasyncns</ulink>,-->
+-<ulink url="&fedora-http-repo;/libasyncns/">libasyncns</ulink>,
++      <ulink url="http://0pointer.de/lennart/projects/libasyncns/">libasyncns</ulink>,
+       <ulink url="http://www.lirc.org/">LIRC</ulink>,
+       <ulink url="http://code.entropywave.com/projects/orc/">ORC</ulink>,
+       <ulink url="http://tdb.samba.org/">TDB</ulink>,
+

Added: trunk/blfs/traduc/commits/r15336.txt
===================================================================
--- trunk/blfs/traduc/commits/r15336.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15336.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,33 @@
+Révision 15336
+
+fichiers modifiés :
+   x/installing/x7driver-intel.xml
+   introduction/welcome/changelog.xml
+   general.ent
+
+Log :
+Update to intermediate release of xf86-video-intel-2.99.917
+
+Le robot a traité 66 % du commit anglais
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15335)
++++ introduction/welcome/changelog.xml	(révision 15336)
+@@ -45,6 +45,17 @@
+ -->
+ 
+     <listitem>
++      <para>January 12th, 2015</para>
++      <itemizedlist>
++        <listitem>
++          <para>[Chris] - Update to intermediate release of 
++          xf86-video-intel-2.99.917.  See 
++          <ulink url="&blfs-ticket-root;5918">#5918</ulink>.</para>
++        </listitem>
++      </itemizedlist>
++    </listitem>
++    <listitem>
+       <para>January 11th, 2015</para>
+       <itemizedlist>
+         <listitem>
+

Added: trunk/blfs/traduc/commits/r15337.txt
===================================================================
--- trunk/blfs/traduc/commits/r15337.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15337.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,23 @@
+Révision 15337
+
+fichiers modifiés :
+   general/graphlib/libtiff.xml
+
+Log :
+Grammar fix
+
+Le robot a traité 0 % du commit anglais
+Index: general/graphlib/libtiff.xml
+===================================================================
+--- general/graphlib/libtiff.xml	(révision 15336)
++++ general/graphlib/libtiff.xml	(révision 15337)
+@@ -116,7 +116,7 @@
+     <title>Command Explanations</title>
+ 
+     <para>
+-<command>sed -i ...</command>: This command fixes a bug which is causing
++      <command>sed -i ...</command>: This command fixes a bug which causes
+       <command>tiffgt</command> to open blank windows in some cases.
+     </para>
+ 
+

Added: trunk/blfs/traduc/commits/r15338.txt
===================================================================
--- trunk/blfs/traduc/commits/r15338.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15338.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,67 @@
+Révision 15338
+
+fichiers modifiés :
+   pst/typesetting/xindy.xml
+   x/installing/x7driver-intel.xml
+
+Log :
+Reformat xindy instructions. Update intel Xorg driver instructions.
+
+Le robot a traité 34 % du commit anglais
+Index: x/installing/x7driver-intel.xml
+===================================================================
+--- x/installing/x7driver-intel.xml	(révision 15337)
++++ x/installing/x7driver-intel.xml	(révision 15338)
+@@ -116,10 +116,7 @@
+         commands:
+       </para>
+ 
+-<screen><userinput>./configure $XORG_CONFIG      \
+---enable-kms-only \
+---enable-uxa      \
+---enable-glamor   &&
++<screen><userinput>./configure $XORG_CONFIG --enable-kms-only &&
+ make</userinput></screen>
+ 
+       <para>
+@@ -142,45 +139,8 @@
+         (User Mode Setting) code.
+       </para>
+ 
+-<para>
+-<parameter>--enable-uxa</parameter>: This switch enables Unified
+-Acceleration Architecture (UXA) and is required for Glamor
+-acceleration.
+-</para>
+-<para>
+-<option>--enable-glamor</option>: This switch enables
+-new GL-based 2D acceleration. As well as specifying this in the
+-build, it needs to be enabled at run time (see below).
+-</para>
+     </sect3>
+ 
+-<sect3>
+-<title>Glamor Acceleration</title>
+-<para>
+-Glamor is an acceleration library which uses cards' 3D capabilities to
+-accelerate 2D rendering. Glamor acceleration is not enabled by default.
+-You have to use a <filename>xorg.conf</filename> file to enable it. To
+-enable Glamor, create the following
+-<filename>/etc/X11/xorg.conf</filename> as the
+-<systemitem class="username">root</systemitem> user:
+-</para>
+-<screen role="root"><userinput>cat >> /etc/X11/xorg.conf << "EOF"
+-<literal>Section "Module"
+-Load "dri2"
+-Load "glamoregl"
+-EndSection
+-Section "Device"
+-Identifier "intel"
+-Driver "intel"
+-Option "AccelMethod" "glamor"
+-EndSection</literal>
+-EOF</userinput></screen>
+     </sect3>
+     <sect3 role="content">
+       <title>Contents</title>
+

Added: trunk/blfs/traduc/commits/r15339.txt
===================================================================
--- trunk/blfs/traduc/commits/r15339.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15339.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,22 @@
+Révision 15339
+
+fichiers modifiés :
+   x/installing/x7driver-intel.xml
+
+Log :
+Typo
+
+Le robot a traité 0 % du commit anglais
+Index: x/installing/x7driver-intel.xml
+===================================================================
+--- x/installing/x7driver-intel.xml	(révision 15338)
++++ x/installing/x7driver-intel.xml	(révision 15339)
+@@ -141,7 +141,6 @@
+ 
+     </sect3>
+ 
+-</sect3>
+     <sect3 role="content">
+       <title>Contents</title>
+ 
+

Added: trunk/blfs/traduc/commits/r15340.txt
===================================================================
--- trunk/blfs/traduc/commits/r15340.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15340.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,24 @@
+Révision 15340
+
+fichiers modifiés :
+   general/genutils/tree.xml
+
+Log :
+fix tree man page permissions
+
+Le robot a traité 0 % du commit anglais
+Index: general/genutils/tree.xml
+===================================================================
+--- general/genutils/tree.xml	(révision 15339)
++++ general/genutils/tree.xml	(révision 15340)
+@@ -74,7 +74,8 @@
+ 
+     <para>Now, as the <systemitem class="username">root</systemitem> user:</para>
+ 
+-<screen role="root"><userinput>make MANDIR=/usr/share/man/man1 install</userinput></screen>
++<screen role="root"><userinput>make MANDIR=/usr/share/man/man1 install &&
++chmod -v 644 /usr/share/man/man1/tree.1</userinput></screen>
+ 
+   </sect2>
+ 
+

Added: trunk/blfs/traduc/commits/r15341.txt
===================================================================
--- trunk/blfs/traduc/commits/r15341.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15341.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,35 @@
+Révision 15341
+
+fichiers modifiés :
+   postlfs/security/sudo.xml
+
+Log :
+compile sudo with option to automatically add super user directories to the path
+
+Le robot a traité 3 % du commit anglais
+Index: postlfs/security/sudo.xml
+===================================================================
+--- postlfs/security/sudo.xml	(révision 15340)
++++ postlfs/security/sudo.xml	(révision 15341)
+@@ -104,6 +104,7 @@
+ is written otherwise           -disable-static           \-->
+ <screen><userinput>./configure --prefix=/usr              \
+             --libexecdir=/usr/lib      \
++            --with-secure-path         \
+             --with-all-insults         \
+             --with-env-editor          \
+             --docdir=/usr/share/doc/sudo-&sudo-version; \
+@@ -135,6 +136,13 @@
+     </para>
+ 
+     <para>
++      <parameter>--with-secure-path</parameter>: This switch transparently adds
++      <filename class="directory">/sbin</filename> and <filename
++      class="directory">/usr/sbin</filename> directories to the
++      <envar>PATH</envar> environment variable.
++    </para>
++    <para>
+       <parameter>--with-all-insults</parameter>: This switch includes all the
+       <application>sudo</application> insult sets.
+     </para>
+

Added: trunk/blfs/traduc/commits/r15342.txt
===================================================================
--- trunk/blfs/traduc/commits/r15342.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15342.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,33 @@
+Révision 15342
+
+fichiers modifiés :
+   introduction/welcome/changelog.xml
+   general.ent
+   packages.ent
+   general/prog/git.xml
+
+Log :
+Update to git-2.2.2.
+
+Le robot a traité 69 % du commit anglais
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15341)
++++ introduction/welcome/changelog.xml	(révision 15342)
+@@ -45,6 +45,16 @@
+ -->
+ 
+     <listitem>
++      <para>January 15th, 2015</para>
++      <itemizedlist>
++        <listitem>
++          <para>[igor] - Update to git-2.2.2. Fixes
++          <ulink url="&blfs-ticket-root;6030">#6030</ulink>.</para>
++        </listitem>
++      </itemizedlist>
++    </listitem>
++    <listitem>
+       <para>January 12th, 2015</para>
+       <itemizedlist>
+         <listitem>
+

Added: trunk/blfs/traduc/commits/r15343.txt
===================================================================
--- trunk/blfs/traduc/commits/r15343.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15343.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,64 @@
+Révision 15343
+
+fichiers modifiés :
+   general/prog/swig.xml
+   introduction/welcome/changelog.xml
+   packages.ent
+
+Log :
+Update to SWIG-3.0.4
+
+Le robot a traité 49 % du commit anglais
+Index: general/prog/swig.xml
+===================================================================
+--- general/prog/swig.xml	(révision 15342)
++++ general/prog/swig.xml	(révision 15343)
+@@ -117,18 +115,29 @@
+     <title>Installation of SWIG</title>
+ 
+     <para>
++      Fix an issue with gccgo-4.9.2:
++    </para>
++<screen><userinput>sed -i 's/"\.")/"_")/' -i Source/Modules/go.cxx</userinput></screen>
++    <para>
+       Install <application>SWIG</application> by running the following
+       commands:
+     </para>
+ 
+ <!-- Spaces are significant in <screen> sections -->
+-<screen><userinput>./configure --prefix=/usr &&
++<screen><userinput>./configure --prefix=/usr   \
++            --without-clisp &&
+ make</userinput></screen>
+ 
+     <para>
+-To test the results, issue: <command>make -k check</command>. According to
+-<application>SWIG</application>'s documentation, the failure of some
+-tests should not be considered harmful.
++      To test the results, issue: <command>make -k check</command>. If you
++      have both <xref linkend="python"/> and <xref linkend="python3"/>
++      installed, only the Python-2 tests are run. You can run test for
++      Python-3 by issuing <command>PY3=1 make check-python-examples</command>
++      followed by <command>PY3=1 make check-python-test-suite</command>.
++      According to <application>SWIG</application>'s documentation, the failure
++      of some tests should not be considered harmful.
+     </para>
+ 
+     <para>
+
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15342)
++++ introduction/welcome/changelog.xml	(révision 15343)
+@@ -48,6 +48,10 @@
+       <para>January 15th, 2015</para>
+       <itemizedlist>
+         <listitem>
++          <para>[pierre] - Update to swig-3.0.4. Fixes
++          <ulink url="&blfs-ticket-root;5992">#5992</ulink>.</para>
++        </listitem>
++        <listitem>
+           <para>[igor] - Update to git-2.2.2. Fixes
+           <ulink url="&blfs-ticket-root;6030">#6030</ulink>.</para>
+         </listitem>
+

Added: trunk/blfs/traduc/commits/r15344.txt
===================================================================
--- trunk/blfs/traduc/commits/r15344.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15344.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,33 @@
+Révision 15344
+
+fichiers modifiés :
+   general.ent
+   packages.ent
+   introduction/welcome/changelog.xml
+   networking/netprogs/samba.xml
+
+Log :
+Update to samba-4.1.16.
+
+Le robot a traité 69 % du commit anglais
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15343)
++++ introduction/welcome/changelog.xml	(révision 15344)
+@@ -48,6 +48,16 @@
+       <para>January 15th, 2015</para>
+       <itemizedlist>
+         <listitem>
++          <para>[fernando] - Update to samba-4.1.16. Fixes
++          <ulink url="&blfs-ticket-root;6033">#6033</ulink>.</para>
++        </listitem>
++      </itemizedlist>
++    </listitem>
++    <listitem>
++      <para>January 15th, 2015</para>
++      <itemizedlist>
++        <listitem>
+           <para>[pierre] - Update to swig-3.0.4. Fixes
+           <ulink url="&blfs-ticket-root;5992">#5992</ulink>.</para>
+         </listitem>
+

Added: trunk/blfs/traduc/commits/r15345.txt
===================================================================
--- trunk/blfs/traduc/commits/r15345.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15345.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,9 @@
+Révision 15345
+
+fichiers modifiés :
+   networking/netprogs/samba.xml
+
+Log :
+Update samba urls
+
+Le robot a traité 100 % du commit anglais

Added: trunk/blfs/traduc/commits/r15346.txt
===================================================================
--- trunk/blfs/traduc/commits/r15346.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15346.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,70 @@
+Révision 15346
+
+fichiers modifiés :
+   general.ent
+   packages.ent
+   general/prog/gdb.xml
+   introduction/welcome/changelog.xml
+
+Log :
+Update to gdb-7.8.2
+
+Le robot a traité 47 % du commit anglais
+Index: general/prog/gdb.xml
+===================================================================
+--- general/prog/gdb.xml	(révision 15345)
++++ general/prog/gdb.xml	(révision 15346)
+@@ -79,7 +79,8 @@
+     <bridgehead renderas="sect4">Optional</bridgehead>
+     <para role="optional">
+       <xref linkend="dejagnu"/> (for tests),
+-<xref linkend="guile"/> and
++      <xref linkend="doxygen"/>,
++      <xref linkend="guile"/>, and
+       <xref linkend="python2"/>
+     </para>
+ 
+@@ -115,6 +116,21 @@
+ 
+ <screen role="root"><userinput>make -C gdb install</userinput></screen>
+ 
++    <para>
++      Optionally, to build the API documentation using
++      <xref linkend="doxygen"/>, run:
++    </para>
++<screen><userinput>make -C gdb/doc doxy</userinput></screen>
++    <para>
++      The API documentation is now in gdb/doc/doxy. You can install it (as
++      the <systemitem class="username">root</systemitem> user):
++    </para>
++<screen role="root"><userinput>install -d /usr/share/doc/gdb-&gdb-version; &&
++cp -Rv gdb/doc/doxy /usr/share/doc/gdb-&gdb-version;</userinput></screen>
+   </sect2>
+ 
+   <sect2 role="content">
+
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15345)
++++ introduction/welcome/changelog.xml	(révision 15346)
+@@ -45,9 +45,19 @@
+ -->
+ 
+     <listitem>
+-<para>January 15th, 2015</para>
++      <para>Januaray 17th, 2015</para>
+       <itemizedlist>
+         <listitem>
++          <para>[pierre] - Update to gdb-7.8.2. Fixes
++          <ulink url="&blfs-ticket-root;6043">#6043</ulink>.</para>
++        </listitem>
++      </itemizedlist>
++    </listitem>
++    <listitem>
++      <para>January 16th, 2015</para>
++      <itemizedlist>
++        <listitem>
+           <para>[fernando] - Update to samba-4.1.16. Fixes
+           <ulink url="&blfs-ticket-root;6033">#6033</ulink>.</para>
+         </listitem>
+

Added: trunk/blfs/traduc/commits/r15347.txt
===================================================================
--- trunk/blfs/traduc/commits/r15347.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15347.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,135 @@
+Révision 15347
+
+fichiers modifiés :
+   general/graphlib/poppler.xml
+   introduction/welcome/changelog.xml
+
+Log :
+Clarify poppler instructions
+
+Le robot a traité 4 % du commit anglais
+Index: general/graphlib/poppler.xml
+===================================================================
+--- general/graphlib/poppler.xml	(révision 15346)
++++ general/graphlib/poppler.xml	(révision 15347)
+@@ -147,72 +147,37 @@
+     <title>Installation of Poppler</title>
+ 
+     <para>
+-In order to optionally run the test suite, additional download of about
+-9 MB, using <xref linkend="git"/>, is necessary. Make sure that you do
++      In order to optionally run the test suite, an additional download of about
++      9 MB using <xref linkend="git"/> is necessary. Make sure that you do
+       not have the directory ../test.
+     </para>
+ 
+-<screen><userinput>git clone git://git.freedesktop.org/git/poppler/test ../test</userinput></screen>
++<screen><userinput>rm -rf ../test &&
++git clone git://git.freedesktop.org/git/poppler/test ../test</userinput></screen>
+ 
+-<para>
+-This package may be built either without <application>Qt</application>
+-library, or with one or both versions of <application>Qt4 and
+-5</application> libraries. In order to build the
+-<application>Qt4</application> and <application>Qt5</application>
+-libraries, you need to run the install commands twice, because, although
+-both are detected, only the wrapper for the the first
+-<application>Qt</application> version in the PATH is built.
+-</para>
++    <note><para>
++      This package can be optionally built with support for either the Qt4 or
++      Qt5 libraries, but it only builds with one of those at a time. If you
++      have both Qt versions installed, you will need to specify which one to
++      use before executing the <command>configure</command> command given
++      below. Use this command to link to Qt4: 
++      
++      <screen><userinput>source /usr/bin/setqt4</userinput></screen> 
+ 
+-<para>
+-The instructions are divided into four parts: first, build with
+-<application>Qt4 or 5</application> at <filename
+-class="directory">/user</filename>, without <application>Qt</application>
+-or with <application>Qt4</application> under <filename
+-class="directory">/opt</filename>; second, build with
+-<application>Qt5</application> under <filename
+-class="directory">/opt</filename>; third, install the common documents
+-(optional); and fourth, install the additional encoding data package.
+-</para>
++      or use this to use Qt5:
+ 
+-<!-- ==== With Qt4 or 5 at /user, without Qt or with Qt4 under /opt ====== -->
+-<bridgehead renderas="sect3">With Qt4 or 5 at /user, without Qt or with Qt4
+-under /opt</bridgehead>
++      <screen><userinput>source /usr/bin/setqt5</userinput></screen> 
+ 
+-<para>
+-Install <application>Poppler</application> by running the following
+-commands:
+-</para>
++      If you would like <application>Poppler</application> to link to both Qt
++      versions, you will need to build it twice.
++    </para></note>
+ 
+-<!-- Warning: Using zlib is not totally safe -->
+-<screen><userinput>[ -e /usr/bin/setqt4 ] && source setqt4 || [ ! -e /usr/bin/setqt5 ] &&
+-./configure --prefix=/usr     \
+---sysconfdir=/etc \
+---disable-static  \
+---enable-xpdf-headers &&
+-make</userinput></screen>
+     <para>
+-To test the results, issue: <command>make check</command>.
+-</para>
+-<para>
+-Now, as the <systemitem class="username">root</systemitem> user:
+-</para>
+-<screen role="root"><userinput>make install</userinput></screen>
+-<!-- ==== With Qt5 under /opt ====== -->
+-<bridgehead renderas="sect3">With Qt5 under /opt </bridgehead>
+-<para>
+       Install <application>Poppler</application> by running the following
+       commands:
+     </para>
+ 
+-<!-- Warning: Using zlib is not totally safe -->
+-<screen><userinput>[ -e /usr/bin/setqt5 ] && source setqt5 &&
+-./configure --prefix=/usr     \
++<screen><userinput>./configure --prefix=/usr     \
+             --sysconfdir=/etc \
+             --disable-static  \
+             --enable-xpdf-headers &&
+@@ -228,11 +193,9 @@
+ 
+ <screen role="root"><userinput>make install</userinput></screen>
+ 
+-<!-- ==== Documents ====== -->
+-<bridgehead renderas="sect3">Documents</bridgehead>
+     <para>
+-The documents are installed using the following commands:
++      To install the documentation, run the following commands as
++      <systemitem class="username">root</systemitem>:
+     </para>
+ 
+ <screen role="root"><userinput>install -v -m755 -d        /usr/share/doc/poppler-&poppler-version; &&
+
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15346)
++++ introduction/welcome/changelog.xml	(révision 15347)
+@@ -45,9 +45,14 @@
+ -->
+ 
+     <listitem>
+-<para>Januaray 17th, 2015</para>
++      <para>January 17th, 2015</para>
+       <itemizedlist>
+         <listitem>
++          <para>[bdubbs] - Clarify poppler instructions. Fixes
++          <ulink url="&blfs-ticket-root;6027">#6027</ulink>.
++          Thanks to Chris Staub for the patch.</para>
++        </listitem>
++        <listitem>
+           <para>[pierre] - Update to gdb-7.8.2. Fixes
+           <ulink url="&blfs-ticket-root;6043">#6043</ulink>.</para>
+         </listitem>
+

Added: trunk/blfs/traduc/commits/r15348.txt
===================================================================
--- trunk/blfs/traduc/commits/r15348.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15348.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,79 @@
+Révision 15348
+
+fichiers modifiés :
+   general/sysutils/colord.xml
+   general/prog/llvm.xml
+   general/prog/vala.xml
+   introduction/welcome/changelog.xml
+   xsoft/graphweb/seamonkey.xml
+   packages.ent
+   server/databases/sqlite.xml
+   pst/printing/cups-filters.xml
+   x/lib/gtk+3.xml
+
+Log :
+Update to colord-1.2.8. Update to llvm-3.5.1. Update to vala-0.26.2. Update to sqlite-3.8.8.0. Update to gtk+3-3.14.7. Update to seamonkey-2.32. Update to cups-filters-1.0.62.
+
+Le robot a traité 75 % du commit anglais
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15347)
++++ introduction/welcome/changelog.xml	(révision 15348)
+@@ -48,6 +48,34 @@
+       <para>January 17th, 2015</para>
+       <itemizedlist>
+         <listitem>
++          <para>[bdubbs] - Update to colord-1.2.8. Fixes
++          <ulink url="&blfs-ticket-root;6042">#6042</ulink>.</para>
++        </listitem>
++        <listitem>
++          <para>[bdubbs] - Update to llvm-3.5.1. Fixes
++          <ulink url="&blfs-ticket-root;6038">#6038</ulink>.</para>
++        </listitem>
++        <listitem>
++          <para>[bdubbs] - Update to vala-0.26.2. Fixes
++          <ulink url="&blfs-ticket-root;6032">#6032</ulink>.</para>
++        </listitem>
++        <listitem>
++          <para>[bdubbs] - Update to sqlite-3.8.8.0. Fixes
++          <ulink url="&blfs-ticket-root;6045">#6045</ulink>.</para>
++        </listitem>
++        <listitem>
++          <para>[bdubbs] - Update to gtk+3-3.14.7. Fixes
++          <ulink url="&blfs-ticket-root;6026">#6026</ulink>.</para>
++        </listitem>
++        <listitem>
++          <para>[bdubbs] - Update to seamonkey-2.32. Fixes
++          <ulink url="&blfs-ticket-root;6040">#6040</ulink>.</para>
++        </listitem>
++        <listitem>
++          <para>[bdubbs] - Update to cups-filters-1.0.62. Fixes
++          <ulink url="&blfs-ticket-root;6039">#6039</ulink>.</para>
++        </listitem>
++        <listitem>
+           <para>[bdubbs] - Clarify poppler instructions. Fixes
+           <ulink url="&blfs-ticket-root;6027">#6027</ulink>.
+           Thanks to Chris Staub for the patch.</para>
+
+Index: server/databases/sqlite.xml
+===================================================================
+--- server/databases/sqlite.xml	(révision 15347)
++++ server/databases/sqlite.xml	(révision 15348)
+@@ -4,20 +4,20 @@
+ 
+ 
+   <!ENTITY sqlite-download-http
+-"http://sqlite.org/2014/sqlite-autoconf-&sqlite-dl-version;.tar.gz">
++           "https://sqlite.org/2015/sqlite-autoconf-&sqlite-dl-version;.tar.gz">
+   <!ENTITY sqlite-download-ftp  " ">
+   <!ENTITY sqlite-size          "2 MB">
+   <!ENTITY sqlite-buildsize     "17 MB (additional 25 MB for the Optional Documentation)">
+   <!ENTITY sqlite-time          "0.2 SBU">
+ 
+   <!ENTITY sqlite-docs-download
+-"http://sqlite.org/2014/sqlite-doc-&sqlite-doc-version;.zip">
++           "https://sqlite.org/2015/sqlite-doc-&sqlite-doc-version;.zip">
+   <!ENTITY sqlite-docs-size     "4.7 MB">
+ ]>
+ 
+

Added: trunk/blfs/traduc/commits/r15349.txt
===================================================================
--- trunk/blfs/traduc/commits/r15349.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15349.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,44 @@
+Révision 15349
+
+fichiers modifiés :
+   packages.ent
+   x/installing/mesalib.xml
+   introduction/welcome/changelog.xml
+
+Log :
+Update to mesa-10.4.2.
+
+Le robot a traité 45 % du commit anglais
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15348)
++++ introduction/welcome/changelog.xml	(révision 15349)
+@@ -48,6 +48,10 @@
+       <para>January 17th, 2015</para>
+       <itemizedlist>
+         <listitem>
++          <para>[igor] - Update to mesa-10.4.2. Fixes
++          <ulink url="&blfs-ticket-root;6035">#6035</ulink>.</para>
++        </listitem>
++        <listitem>
+           <para>[bdubbs] - Update to colord-1.2.8. Fixes
+           <ulink url="&blfs-ticket-root;6042">#6042</ulink>.</para>
+         </listitem>
+
+Index: x/installing/mesalib.xml
+===================================================================
+--- x/installing/mesalib.xml	(révision 15348)
++++ x/installing/mesalib.xml	(révision 15349)
+@@ -97,9 +97,9 @@
+ 
+     <bridgehead renderas="sect4">Recommended</bridgehead>
+     <para role="recommended">
+-<xref linkend="elfutils"/> (required for radeon 3d drivers),
++      <xref linkend="elfutils"/> (required for radeonsi 3d drivers),
+       <xref linkend="libvdpau"/> (to build VDPAU drivers),
+-<xref linkend="llvm"/> (required for radeon 3d drivers and also for
++      <xref linkend="llvm"/> (required for radeonsi 3d drivers and also for
+       llvmpipe which is intended to be the fastest of the three sw rasterizers,
+       see <ulink url="http://www.mesa3d.org/faq.html#part3"></ulink> )
+     </para>
+

Added: trunk/blfs/traduc/commits/r15350.txt
===================================================================
--- trunk/blfs/traduc/commits/r15350.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15350.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,47 @@
+Révision 15350
+
+fichiers modifiés :
+   x/installing/mesalib.xml
+
+Log :
+gallium3d r600 doesn't seem to require llvm and elfutils
+
+Le robot a traité 0 % du commit anglais
+Index: x/installing/mesalib.xml
+===================================================================
+--- x/installing/mesalib.xml	(révision 15349)
++++ x/installing/mesalib.xml	(révision 15350)
+@@ -97,9 +97,9 @@
+ 
+     <bridgehead renderas="sect4">Recommended</bridgehead>
+     <para role="recommended">
+-<xref linkend="elfutils"/> (required for radeonsi 3d drivers),
++      <xref linkend="elfutils"/> (required for Gallium3D r300 and radeonsi drivers),
+       <xref linkend="libvdpau"/> (to build VDPAU drivers),
+-<xref linkend="llvm"/> (required for radeonsi 3d drivers and also for
++      <xref linkend="llvm"/> (required for Gallium3D r300 and radeonsi drivers and also for
+       llvmpipe which is intended to be the fastest of the three sw rasterizers,
+       see <ulink url="http://www.mesa3d.org/faq.html#part3"></ulink> )
+     </para>
+@@ -120,7 +120,7 @@
+         need to modify the instructions if you choose not to install them.
+         Please note that <application>elfutils</application> and
+         <application>LLVM</application> are <emphasis>required</emphasis>
+-for Radeon 3D drivers.  For an explanation of gallium please see
++        for Gallium3D r300 and radeonsi drivers.  For an explanation of Gallium3D please see
+         <ulink url="https://en.wikipedia.org/wiki/Gallium3D"></ulink>.
+       </para>
+     </note>
+@@ -262,9 +262,9 @@
+ 
+     <para>
+       <parameter>--with-gallium-drivers="..."</parameter>: This parameter
+-controls which Gallium drivers should be built. Available drivers
++      controls which Gallium3D drivers should be built. Available drivers
+       are: i915, ilo, nouveau, r300, r600, radeonsi, svga and swrast. You
+-will need to remove r300, r600 and radeonsi from the list if you did
++      will need to remove r300 and radeonsi from the list if you did
+       not install <application>elfutils</application> and
+       <application>LLVM</application>.
+     </para>
+

Added: trunk/blfs/traduc/commits/r15351.txt
===================================================================
--- trunk/blfs/traduc/commits/r15351.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15351.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,25 @@
+Révision 15351
+
+fichiers modifiés :
+   general/genutils/lsof.xml
+
+Log :
+Text update
+
+Le robot a traité 0 % du commit anglais
+Index: general/genutils/lsof.xml
+===================================================================
+--- general/genutils/lsof.xml	(révision 15350)
++++ general/genutils/lsof.xml	(révision 15351)
+@@ -71,8 +71,8 @@
+   <sect2 role="installation">
+     <title>Installation of lsof</title>
+ 
+-<para>The <application>lsof</application> tarball includes several files,
+-between them, another tarball with the source code, which needs, in turn,
++    <para>The contents of the <application>lsof</application> tarball
++    include another tarball with the source code, which needs, in turn,
+     to be unpacked. Install <application>lsof</application> by running the
+     following commands:</para>
+ 
+

Added: trunk/blfs/traduc/commits/r15352.txt
===================================================================
--- trunk/blfs/traduc/commits/r15352.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15352.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,24 @@
+Révision 15352
+
+fichiers modifiés :
+   xsoft/office/libreoffice.xml
+
+Log :
+Text clarification on reason for building Libreoffice in graphical env
+
+Le robot a traité 0 % du commit anglais
+Index: xsoft/office/libreoffice.xml
+===================================================================
+--- xsoft/office/libreoffice.xml	(révision 15351)
++++ xsoft/office/libreoffice.xml	(révision 15352)
+@@ -291,7 +291,8 @@
+ 
+     <note>
+       <para>
+-Build this package in a graphical environment.
++      LibreOffice must be built in a graphical environment - the build will
++      fail otherwise.
+       </para>
+     </note>
+ 
+

Added: trunk/blfs/traduc/commits/r15353.txt
===================================================================
--- trunk/blfs/traduc/commits/r15353.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15353.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,25 @@
+Révision 15353
+
+fichiers modifiés :
+   multimedia/libdriv/flac.xml
+
+Log :
+flac uses sse by default
+
+Le robot a traité 51 % du commit anglais
+Index: multimedia/libdriv/flac.xml
+===================================================================
+--- multimedia/libdriv/flac.xml	(révision 15352)
++++ multimedia/libdriv/flac.xml	(révision 15353)
+@@ -112,11 +104,6 @@
+     used so that the test suite will complete in a reasonable amount of time.
+     Remove it if you desire more extensive tests.</para>
+ 
+-<para><option>--enable-sse</option>: This option is off by default and
+-should be set on if your machine has SSE capability. One way to find out if
+-you have SSE is to issue <command>cat /proc/cpuinfo</command> and see if
+-<computeroutput>sse</computeroutput> is listed in the flags.</para>
+   </sect2>
+ 
+   <sect2 role="content">
+

Added: trunk/blfs/traduc/commits/r15354.txt
===================================================================
--- trunk/blfs/traduc/commits/r15354.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15354.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,33 @@
+Révision 15354
+
+fichiers modifiés :
+   general.ent
+   packages.ent
+   x/lib/webkitgtk26.xml
+   introduction/welcome/changelog.xml
+
+Log :
+Fix sqlite version. Update to WebKitGTK+ 2.6.5.
+
+Le robot a traité 75 % du commit anglais
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15353)
++++ introduction/welcome/changelog.xml	(révision 15354)
+@@ -45,6 +45,16 @@
+ -->
+ 
+     <listitem>
++      <para>January 18th, 2015</para>
++      <itemizedlist>
++        <listitem>
++          <para>[igor] - Update to WebKitGTK+ 2.6.5. Fixes
++          <ulink url="&blfs-ticket-root;6044">#6044</ulink>.</para>
++        </listitem>
++      </itemizedlist>
++    </listitem>
++    <listitem>
+       <para>January 17th, 2015</para>
+       <itemizedlist>
+         <listitem>
+

Added: trunk/blfs/traduc/commits/r15355.txt
===================================================================
--- trunk/blfs/traduc/commits/r15355.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15355.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,29 @@
+Révision 15355
+
+fichiers modifiés :
+   packages.ent
+   introduction/welcome/changelog.xml
+   postlfs/security/gnutls.xml
+
+Log :
+Update to gnutls-3.3.12.
+
+Le robot a traité 65 % du commit anglais
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15354)
++++ introduction/welcome/changelog.xml	(révision 15355)
+@@ -48,7 +48,11 @@
+       <para>January 18th, 2015</para>
+       <itemizedlist>
+         <listitem>
+-<para>[igor] - Update to WebKitGTK+ 2.6.5. Fixes
++          <para>[fernando] - Update to gnutls-3.3.12. Fixes
++          <ulink url="&blfs-ticket-root;6046">#6046</ulink>.</para>
++        </listitem>
++        <listitem>
++          <para>[fernando] - Update to WebKitGTK+ 2.6.5. Fixes
+           <ulink url="&blfs-ticket-root;6044">#6044</ulink>.</para>
+         </listitem>
+       </itemizedlist>
+

Added: trunk/blfs/traduc/commits/r15356.txt
===================================================================
--- trunk/blfs/traduc/commits/r15356.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15356.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,30 @@
+Révision 15356
+
+fichiers modifiés :
+   x/installing/x7app.xml
+   introduction/welcome/changelog.xml
+
+Log :
+Update to iceauth-1.0.7 (Xorg Apps). Update to mkfontscale-1.1.2 (Xorg Apps).
+
+Le robot a traité 57 % du commit anglais
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15355)
++++ introduction/welcome/changelog.xml	(révision 15356)
+@@ -48,6 +48,14 @@
+       <para>January 18th, 2015</para>
+       <itemizedlist>
+         <listitem>
++          <para>[fernando] - Update to mkfontscale-1.1.2 (Xorg Apps). Fixes
++          <ulink url="&blfs-ticket-root;6048">#6048</ulink>.</para>
++        </listitem>
++        <listitem>
++          <para>[fernando] - Update to iceauth-1.0.7 (Xorg Apps). Fixes
++          <ulink url="&blfs-ticket-root;6047">#6047</ulink>.</para>
++        </listitem>
++        <listitem>
+           <para>[fernando] - Update to gnutls-3.3.12. Fixes
+           <ulink url="&blfs-ticket-root;6046">#6046</ulink>.</para>
+         </listitem>
+

Added: trunk/blfs/traduc/commits/r15357.txt
===================================================================
--- trunk/blfs/traduc/commits/r15357.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15357.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,43 @@
+Révision 15357
+
+fichiers modifiés :
+   xsoft/graphweb/firefox.xml
+   packages.ent
+   introduction/welcome/changelog.xml
+
+Log :
+Update to firefox-35.0.
+
+Le robot a traité 48 % du commit anglais
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15356)
++++ introduction/welcome/changelog.xml	(révision 15357)
+@@ -48,6 +48,10 @@
+       <para>January 18th, 2015</para>
+       <itemizedlist>
+         <listitem>
++          <para>[igor] - Update to firefox-35.0. Fixes
++          <ulink url="&blfs-ticket-root;6029">#6029</ulink>.</para>
++        </listitem>
++        <listitem>
+           <para>[fernando] - Update to mkfontscale-1.1.2 (Xorg Apps). Fixes
+           <ulink url="&blfs-ticket-root;6048">#6048</ulink>.</para>
+         </listitem>
+
+Index: xsoft/graphweb/firefox.xml
+===================================================================
+--- xsoft/graphweb/firefox.xml	(révision 15356)
++++ xsoft/graphweb/firefox.xml	(révision 15357)
+@@ -172,8 +172,8 @@
+ 
+ # GStreamer is necessary for H.264 video playback in HTML5 Video Player;
+ # to be enabled, also remember to set "media.gstreamer.enabled" to "true"
+-# in about:config. If you do *not* have GStreamer 0.x.y, uncomment this line:
+-#ac_add_options --disable-gstreamer
++# in about:config. If you have GStreamer 0.x.y, comment out this line:
++ac_add_options --disable-gstreamer
+ # or uncomment this line, if you have GStreamer 1.x.y
+ #ac_add_options --enable-gstreamer=1.0
+ 
+

Added: trunk/blfs/traduc/commits/r15358.txt
===================================================================
--- trunk/blfs/traduc/commits/r15358.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15358.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,25 @@
+Révision 15358
+
+fichiers modifiés :
+   general/genlib/glib2.xml
+
+Log :
+glib can use python3
+
+Le robot a traité 40 % du commit anglais
+Index: general/genlib/glib2.xml
+===================================================================
+--- general/genlib/glib2.xml	(révision 15357)
++++ general/genlib/glib2.xml	(révision 15358)
+@@ -162,6 +162,11 @@
+     <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+       href="../../xincludes/gtk-doc-rebuild.xml"/>
+ 
++    <para>
++      <option>--with-python=python3</option>: Add this switch if you want GLib
++      to use Python3 instead of Python2.
++    </para>
+   </sect2>
+ 
+   <sect2 role="content">
+

Added: trunk/blfs/traduc/commits/r15359.txt
===================================================================
--- trunk/blfs/traduc/commits/r15359.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15359.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,40 @@
+Révision 15359
+
+fichiers modifiés :
+   general/genlib/libxml2.xml
+
+Log :
+libxml2 can use python3
+
+Le robot a traité 3 % du commit anglais
+Index: general/genlib/libxml2.xml
+===================================================================
+--- general/genlib/libxml2.xml	(révision 15358)
++++ general/genlib/libxml2.xml	(révision 15359)
+@@ -86,7 +86,7 @@
+ 
+     <bridgehead renderas="sect4">Recommended</bridgehead>
+     <para role="recommended">
+-<xref linkend="python2"/> (to build and install a
++      <xref linkend="python2"/> or <xref linkend="python3"/> (to build and install a
+       <application>Python</application> library module, additionally it is
+       required to run the full suite of tests)
+     </para>
+@@ -153,11 +153,16 @@
+       href="../../xincludes/static-libraries.xml"/>
+ 
+     <para>
+-<option>--with-history</option>: This switch enables
++      <parameter>--with-history</parameter>: This switch enables
+       <application>Readline</application> support when running
+       <command>xmlcatalog</command> or <command>xmllint</command> in shell mode.
+     </para>
+ 
++    <para>
++      <option>--with-python=/usr/bin/python3</option>: Add this switch if you
++      want libxml2 to use Python3 instead of Python2.
++    </para>
+   </sect2>
+ 
+   <sect2 role="content">
+

Added: trunk/blfs/traduc/commits/r15360.txt
===================================================================
--- trunk/blfs/traduc/commits/r15360.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15360.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,44 @@
+Révision 15360
+
+fichiers supprimés :
+   general/genutils/xscreensaver.xml
+
+fichiers déplacés (avec ou sans changements) :
+xscreensaver.xml
+
+fichiers modifiés :
+   general/genutils/genutils.xml
+   packages.ent
+   xsoft/other/other.xml
+
+Log :
+move xscreensaver to more appropriate chapter
+
+Le robot a traité 96 % du commit anglais
+Index: xsoft/other/other.xml
+===================================================================
+--- xsoft/other/other.xml	(révision 15359)
++++ xsoft/other/other.xml	(révision 15360)
+@@ -36,5 +36,6 @@
+   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="transmission.xml"/>
+   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="xchat.xml"/>
+   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="xdg-utils.xml"/>
++  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="xscreensaver.xml"/>
+ 
+ </chapter>
+
+Index: xsoft/other/xscreensaver.xml
+===================================================================
+--- general/genutils/xscreensaver.xml	2015-01-18 21:26:38.560303468 +0100
++++ general/genutils/xscreensaver.xml	2015-01-18 21:26:38.580302638 +0100
+@@ -321,3 +321,9 @@
+   </sect2>
+ 
+ </sect1>
++Modification de propriétés sur xsoft/other/xscreensaver.xml
++___________________________________________________________________
++Added: svn:keywords
++## -0,0 +1 ##
++Date LastChangedBy
++\ No newline at end of property
+

Added: trunk/blfs/traduc/commits/r15361.txt
===================================================================
--- trunk/blfs/traduc/commits/r15361.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15361.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,51 @@
+Révision 15361
+
+fichiers modifiés :
+   pst/typesetting/texlive.xml
+
+Log :
+- add an empty http download (does not show in the rendered book - remove role="root" from build instructions - move role="root" to the correct place in install instructions
+
+Le robot a traité 0 % du commit anglais
+Index: pst/typesetting/texlive.xml
+===================================================================
+--- pst/typesetting/texlive.xml	(révision 15360)
++++ pst/typesetting/texlive.xml	(révision 15361)
+@@ -89,6 +89,9 @@
+ 
+     <itemizedlist spacing="compact">
+       <listitem>
++        <para>Download (HTTP): <ulink url="&texlive-texmf-download-http;"/></para>
++      </listitem>
++      <listitem>
+         <para>Download (FTP): <ulink url="&texlive-texmf-download-ftp;"/></para>
+       </listitem>
+       <listitem>
+@@ -134,7 +137,7 @@
+ 
+ <!-- the configure switches should be identical to those in the
+  first part of texlive itself -->
+-<screen role="root"><userinput>export TEXARCH=$(uname -m | sed -e 's/i.86/i386/' -e 's/$/-linux/') &&
++<screen><userinput>TEXARCH=$(uname -m | sed -e 's/i.86/i386/' -e 's/$/-linux/') &&
+ mkdir texlive-build &&
+ cd texlive-build    &&
+ 
+@@ -172,14 +175,14 @@
+     <para>Now, as the <systemitem class="username">root</systemitem>
+     user:</para>
+ 
+-<screen><userinput role="root">make install &&
++<screen role="root"><userinput>make install &&
+ make texlinks</userinput></screen>
+ 
+     <para>And now, install the additional files as the
+     <systemitem class="username">root</systemitem> user:</para>
+ 
+-<screen><userinput role="root">mkdir -pv /opt/texlive/&texlive-year; &&
+-tar -xf texlive-&texlive-version;-texmf.tar.xz -C /opt/texlive/&texlive-year; --strip-components=1</userinput></screen>
++<screen role="root"><userinput>mkdir -pv /opt/texlive/&texlive-year; &&
++tar -xf ../texlive-&texlive-version;-texmf.tar.xz -C /opt/texlive/&texlive-year; --strip-components=1</userinput></screen>
+ 
+     <para>Now proceed to <xref linkend="tex-path"/>.</para>
+ 
+

Added: trunk/blfs/traduc/commits/r15362.txt
===================================================================
--- trunk/blfs/traduc/commits/r15362.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15362.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,27 @@
+Révision 15362
+
+fichiers modifiés :
+   introduction/welcome/changelog.xml
+   packages.ent
+   xsoft/other/thunderbird.xml
+
+Log :
+Update to thunderbird-31.4.0.
+
+Le robot a traité 68 % du commit anglais
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 15361)
++++ introduction/welcome/changelog.xml	(révision 15362)
+@@ -48,6 +48,10 @@
+       <para>January 18th, 2015</para>
+       <itemizedlist>
+         <listitem>
++          <para>[igor] - Update to thunderbird-31.4.0. Fixes
++          <ulink url="&blfs-ticket-root;6037">#6037</ulink>.</para>
++        </listitem>
++        <listitem>
+           <para>[igor] - Update to firefox-35.0. Fixes
+           <ulink url="&blfs-ticket-root;6029">#6029</ulink>.</para>
+         </listitem>
+

Added: trunk/blfs/traduc/commits/r15363.txt
===================================================================
--- trunk/blfs/traduc/commits/r15363.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r15363.txt	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,37 @@
+Révision 15363
+
+fichiers modifiés :
+   general/graphlib/poppler.xml
+
+Log :
+Move openjpeg to recommended dep pf poppler
+
+Le robot a traité 0 % du commit anglais
+Index: general/graphlib/poppler.xml
+===================================================================
+--- general/graphlib/poppler.xml	(révision 15362)
++++ general/graphlib/poppler.xml	(révision 15363)
+@@ -118,8 +118,9 @@
+     <bridgehead renderas="sect4">Recommended</bridgehead>
+     <para role="recommended">
+       <xref linkend="cairo"/>,
+-<xref linkend="libjpeg"/>, and
+-<xref linkend="libpng"/>
++      <xref linkend="libjpeg"/>,
++      <xref linkend="libpng"/>, and
++      <xref linkend="openjpeg"/>
+     </para>
+ 
+     <bridgehead renderas="sect4">Optional</bridgehead>
+@@ -130,9 +131,8 @@
+       <xref linkend="gtk2"/>,
+       <xref linkend="lcms"/> or <xref linkend="lcms2"/>,
+       <xref linkend="libtiff"/>,
+-<xref linkend="openjpeg"/> or
+       <xref linkend="openjpeg2"/>
+-(preference is for OpenJPEG1, due to regressions in OpenJPEG2),
++      (preference is for OpenJPEG1, due to regressions with OpenJPEG2),
+       <xref linkend="qt4"/> (the <filename>libpoppler-qt4.so</filename> library
+       is needed for PDF support in <application>Okular</application>), and
+       <xref linkend="qt5"/>
+

Modified: trunk/blfs/x/installing/mesalib.xml
===================================================================
--- trunk/blfs/x/installing/mesalib.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/x/installing/mesalib.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -6,10 +6,10 @@
   <!ENTITY mesalib-download-http " ">
   <!ENTITY mesalib-download-ftp
   "ftp://ftp.freedesktop.org/pub/mesa/&mesalib-version;/MesaLib-&mesalib-version;.tar.bz2">
-  <!ENTITY mesalib-md5sum        "461ab299aa38937a679c57b401788a42">
+  <!ENTITY mesalib-md5sum        "ca915badc9c676f811a5ee514748ef78">
   <!ENTITY mesalib-size          "7.1 Mo">
   <!ENTITY mesalib-buildsize     "0.2 Go (additional 2 Mo for the docs)">
-  <!ENTITY mesalib-time          "8.1 SBU">
+  <!ENTITY mesalib-time          "6.3 SBU">
 ]>
 <sect1 id="mesalib" xreflabel="MesaLib-&mesalib-version;">
   <?dbhtml filename="mesalib.html"?>
@@ -115,18 +115,7 @@
      Installez <application>MesaLib</application> en lançant les commandes
     suivantes :</para>
 <screen>
-<userinput>./autogen.sh CFLAGS="-O2" CXXFLAGS="-O2"   \
-            --prefix=$XORG_PREFIX          \
-            --sysconfdir=/etc              \
-            --enable-texture-float         \
-            --enable-gles1                 \
-            --enable-gles2                 \
-            --enable-osmesa                \
-            --enable-xa                    \
-            --enable-gbm                   \
-            --enable-glx-tls               \
-            --with-egl-platforms="drm,x11" \
-            --with-gallium-drivers="nouveau,r300,r600,radeonsi,svga,swrast" &&
+<userinput>./autogen.sh CFLAGS="-O2" CXXFLAGS="-O2"               --prefix=$XORG_PREFIX                      --sysconfdir=/etc                          --enable-texture-float                     --enable-gles1                             --enable-gles2                             --enable-osmesa                            --enable-xa                                --enable-gbm                               --enable-glx-tls                           --with-egl-platforms="drm,x11"             --with-gallium-drivers="nouveau,r300,r600,radeonsi,svga,swrast" &&
 make</userinput>
 </screen>
     <para>

Modified: trunk/blfs/x/installing/x7app.xml
===================================================================
--- trunk/blfs/x/installing/x7app.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/x/installing/x7app.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -10,14 +10,14 @@
   <!ENTITY x7apps-time          "1.9 SBU">
   <!ENTITY bdftopcf-version                "1.0.5">
   <!ENTITY bdftopcf-md5sum                 "53a48e1fdfec29ab2e89f86d4b7ca902">
-  <!ENTITY iceauth-version                 "1.0.6">
-  <!ENTITY iceauth-md5sum                  "2527344acc60741a709f4858564c5ae6">
+  <!ENTITY iceauth-version                 "1.0.7">
+  <!ENTITY iceauth-md5sum                  "25dab02f8e40d5b71ce29a07dc901b8c">
   <!ENTITY luit-version                    "1.1.1">
   <!ENTITY luit-md5sum                     "c4a3664e08e5a47c120ff9263ee2f20c">
   <!ENTITY mkfontdir-version               "1.0.7">
   <!ENTITY mkfontdir-md5sum                "18c429148c96c2079edda922a2b67632">
-  <!ENTITY mkfontscale-version             "1.1.1">
-  <!ENTITY mkfontscale-md5sum              "03de3f15db678e277f5ef9c013aca1ad">
+  <!ENTITY mkfontscale-version             "1.1.2">
+  <!ENTITY mkfontscale-md5sum              "9bdd6ebfa62b1bbd474906ac86a40fd8">
   <!ENTITY sessreg-version                 "1.0.8">
   <!ENTITY sessreg-md5sum                  "f548e389ff68424947b87785df6a321b">
   <!ENTITY setxkbmap-version               "1.3.0">
@@ -189,8 +189,7 @@
 <screen>
 <userinput>mkdir app &&
 cd app &&
-grep -v '^#' ../app-&xorg-version;.md5 | awk '{print $2}' | wget -i- -c \
-    -B http://xorg.freedesktop.org/releases/individual/app/ &&
+grep -v '^#' ../app-&xorg-version;.md5 | awk '{print $2}' | wget -i- -c     -B http://xorg.freedesktop.org/releases/individual/app/ &&
 md5sum -c ../app-&xorg-version;.md5</userinput>
 </screen>
   </sect2>
@@ -217,7 +216,7 @@
       line3="#  define _XOPEN_SOURCE 600"
       line4="#endif"
  
-      sed -i -e "s@#ifdef HAVE_CONFIG_H@$line1\n$line2\n$line3\n$line4\n\n&@" sys.c
+      sed -i -e "s@#ifdef HAVE_CONFIG_H@$line1n$line2n$line3n$line4nn&@" sys.c
       unset line1 line2 line3 line4
     ;;
   esac

Modified: trunk/blfs/x/installing/x7driver-intel.xml
===================================================================
--- trunk/blfs/x/installing/x7driver-intel.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/x/installing/x7driver-intel.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -3,12 +3,12 @@
    "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../../general.ent">
   %general-entities;
-  <!ENTITY xorg-intel-driver-version "2.99.916">
+  <!ENTITY xorg-intel-driver-version "2.99.917">
   <!ENTITY xorg-intel-driver-download-http "&xorg-download-http;/driver/xf86-video-intel-&xorg-intel-driver-version;.tar.bz2">
   <!ENTITY xorg-intel-driver-download-ftp  "&xorg-download-ftp;/driver/xf86-video-intel-&xorg-intel-driver-version;.tar.bz2">
-  <!ENTITY xorg-intel-driver-md5sum        "7e24551eae0b952f4d795e791e88ebe5">
-  <!ENTITY xorg-intel-driver-size          "2.1 Mo">
-  <!ENTITY xorg-intel-driver-buildsize     "71 Mo">
+  <!ENTITY xorg-intel-driver-md5sum        "fa196a66e52c0c624fe5d350af7a5e7b">
+  <!ENTITY xorg-intel-driver-size          "2.2 Mo">
+  <!ENTITY xorg-intel-driver-buildsize     "70 Mo">
   <!ENTITY xorg-intel-driver-time          "0.6 SBU">
 ]>
  <sect2 id="xorg-intel-driver" xreflabel="Xorg Intel Driver-&xorg-intel-driver-version;">
@@ -97,10 +97,7 @@
          
       </para>
 <screen>
-<userinput>./configure $XORG_CONFIG      \
-            --enable-kms-only \
-            --enable-uxa      \
-            --enable-glamor   &&
+<userinput>./configure $XORG_CONFIG                  --enable-kms-only             --enable-uxa                  --enable-glamor   &&
 make</userinput>
 </screen>
       <para>

Modified: trunk/blfs/x/lib/gtk+3.xml
===================================================================
--- trunk/blfs/x/lib/gtk+3.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/x/lib/gtk+3.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -5,7 +5,7 @@
   %general-entities;
   <!ENTITY gtk3-download-http "&gnome-download-http;/gtk+/&gnome-minor-14;/gtk+-&gtk3-version;.tar.xz">
   <!ENTITY gtk3-download-ftp  "&gnome-download-ftp;/gtk+/&gnome-minor-14;/gtk+-&gtk3-version;.tar.xz">
-  <!ENTITY gtk3-md5sum        "34340b3ede9c1cfee3c6e2ec5f6eccc5">
+  <!ENTITY gtk3-md5sum        "025938c2bc09fcc6173b5533681550ee">
   <!ENTITY gtk3-size          "15 Mo">
   <!ENTITY gtk3-buildsize     "402 Mo (additional 6 Mo for the test suite and 19 Mo to rebuild the docs)">
   <!ENTITY gtk3-time          "4.7 SBU (additional 0.5 SBU for the test suite and 3.8 SBU to rebuild the docs)">
@@ -106,11 +106,7 @@
       suivantes :
     </para>
 <screen>
-<userinput>./configure --prefix=/usr             \
-            --sysconfdir=/etc         \
-            --enable-broadway-backend \
-            --enable-x11-backend      \
-            --disable-wayland-backend &&
+<userinput>./configure --prefix=/usr                         --sysconfdir=/etc                     --enable-broadway-backend             --enable-x11-backend                  --disable-wayland-backend &&
 make</userinput>
 </screen>
      <para>

Modified: trunk/blfs/x/lib/webkitgtk26.xml
===================================================================
(Binary files differ)

Modified: trunk/blfs/xsoft/graphweb/firefox.xml
===================================================================
--- trunk/blfs/xsoft/graphweb/firefox.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/xsoft/graphweb/firefox.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -7,10 +7,10 @@
            "&mozilla-http;/firefox/releases/&firefox-version;/source/firefox-&firefox-version;.source.tar.bz2">
   <!ENTITY firefox-download-ftp
            "&mozilla-ftp;/firefox/releases/&firefox-version;/source/firefox-&firefox-version;.source.tar.bz2">
-  <!ENTITY firefox-md5sum        "d9b7e4819899e23466f5b0750408f128">
-  <!ENTITY firefox-size          "157 Mo">
-  <!ENTITY firefox-buildsize     "4.0 Go (78 Mo installé)">
-  <!ENTITY firefox-time          "17 SBU (using parallelism=4)">
+  <!ENTITY firefox-md5sum        "d8ec0cad257e02d379828785e8790e17">
+  <!ENTITY firefox-size          "168 Mo">
+  <!ENTITY firefox-buildsize     "5.2 Go (78 Mo installé)">
+  <!ENTITY firefox-time          "91 SBU">
 ]>
 <sect1 id="firefox" xreflabel="Firefox-&firefox-version;">
   <?dbhtml filename="firefox.html" ?>
@@ -205,8 +205,7 @@
      </para></note>
  
 <screen>
-<userinput>MOZ_MAKE_FLAGS='-j<replaceable><number></replaceable>' \
-make -f client.mk</userinput>
+<userinput>MOZ_MAKE_FLAGS='-j<replaceable><number></replaceable>' make -f client.mk</userinput>
 </screen>
      <para>
       where <replaceable><number></replaceable> est un entier compris entre 1
@@ -221,8 +220,7 @@
       Maintenant, en tant qu'utilisateur <systemitem class="username">root</systemitem> :
     </para>
 <screen role="root">
-<userinput>MOZ_MAKE_FLAGS='-j<replaceable><number></replaceable>' \
-make -f client.mk install INSTALL_SDK= &&
+<userinput>MOZ_MAKE_FLAGS='-j<replaceable><number></replaceable>' make -f client.mk install INSTALL_SDK= &&
 mkdir -pv /usr/lib/mozilla/plugins &&
 ln -sfv ../../mozilla/plugins /usr/lib/firefox-&firefox-version;/browser</userinput>
 </screen>
@@ -291,8 +289,7 @@
 MimeType=text/html;text/xml;application/xhtml+xml;application/vnd.mozilla.xul+xml;text/mml;x-scheme-handler/http;x-scheme-handler/https;
 StartupNotify=true</literal>
 EOF
-ln -sfv /usr/lib/firefox-&firefox-version;/browser/icons/mozicon128.png \
-        /usr/share/pixmaps/firefox.png</userinput>
+ln -sfv /usr/lib/firefox-&firefox-version;/browser/icons/mozicon128.png         /usr/share/pixmaps/firefox.png</userinput>
 </screen>
   </sect2>
   <sect2 role="content">

Modified: trunk/blfs/xsoft/graphweb/seamonkey.xml
===================================================================
--- trunk/blfs/xsoft/graphweb/seamonkey.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/xsoft/graphweb/seamonkey.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -4,13 +4,13 @@
   <!ENTITY % general-entities SYSTEM "../../general.ent">
   %general-entities;
   <!ENTITY seamonkey-download-http
-  "https://ftp.mozilla.org/pub/mozilla.org/seamonkey/releases/&seamonkey-version;/source/seamonkey-&seamonkey-version;.source.tar.bz2">
+    "&mozilla-http;/seamonkey/releases/&seamonkey-version;/source/seamonkey-&seamonkey-version;.source.tar.bz2">
   <!ENTITY seamonkey-download-ftp
-  "ftp://ftp.mozilla.org/pub/mozilla.org/seamonkey/releases/&seamonkey-version;/source/seamonkey-&seamonkey-version;.source.tar.bz2">
-  <!ENTITY seamonkey-md5sum        "44b6f9cfc2a95fd08dba35ff236d306e">
-  <!ENTITY seamonkey-size          "180 Mo">
-  <!ENTITY seamonkey-buildsize     "4.1 Go (77 Mo installé)">
-  <!ENTITY seamonkey-time          "17 SBU (using parallelism=4)">
+    "&mozilla-ftp;/seamonkey/releases/&seamonkey-version;/source/seamonkey-&seamonkey-version;.source.tar.bz2">
+  <!ENTITY seamonkey-md5sum        "52302e4ce4599c8ab5eb8d4f9a78e7bd">
+  <!ENTITY seamonkey-size          "191 Mo">
+  <!ENTITY seamonkey-buildsize     "4.4 Go (78 Mo installé)">
+  <!ENTITY seamonkey-time          "19 SBU (using parallelism=4)">
 ]>
 <sect1 id="seamonkey" xreflabel="SeaMonkey-&seamonkey-version;">
   <?dbhtml filename="seamonkey.html" ?>
@@ -322,8 +322,7 @@
 StartupNotify=true
 Terminal=false
 EOF
-ln -sfv /usr/lib/seamonkey-&seamonkey-version;/chrome/icons/default/seamonkey.png \
-        /usr/share/pixmaps</userinput>
+ln -sfv /usr/lib/seamonkey-&seamonkey-version;/chrome/icons/default/seamonkey.png         /usr/share/pixmaps</userinput>
 </screen>
   </sect2>
   <sect2 role="content">

Added: trunk/blfs/xsoft/other/asymptote.xml
===================================================================
(Binary files differ)

Index: trunk/blfs/xsoft/other/asymptote.xml
===================================================================
--- trunk/blfs/xsoft/other/asymptote.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/xsoft/other/asymptote.xml	2015-01-18 20:30:47 UTC (rev 6727)

Property changes on: trunk/blfs/xsoft/other/asymptote.xml
___________________________________________________________________
Added: svn:mime-type
## -0,0 +1 ##
+application/xml
\ No newline at end of property
Modified: trunk/blfs/xsoft/other/thunderbird.xml
===================================================================
--- trunk/blfs/xsoft/other/thunderbird.xml	2015-01-17 05:15:23 UTC (rev 6726)
+++ trunk/blfs/xsoft/other/thunderbird.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -7,10 +7,10 @@
            "&mozilla-http;/thunderbird/releases/&thunderbird-version;/source/thunderbird-&thunderbird-version;.source.tar.bz2">
   <!ENTITY thunderbird-download-ftp
            "&mozilla-ftp;/thunderbird/releases/&thunderbird-version;/source/thunderbird-&thunderbird-version;.source.tar.bz2">
-  <!ENTITY thunderbird-md5sum            "3781dfb541412c7f6b530a654b834ce5">
-  <!ENTITY thunderbird-size              "164 Mo">
-  <!ENTITY thunderbird-buildsize         "3.6 Go (68 Mo installé)">
-  <!ENTITY thunderbird-time              "16 SBU (using parallelism=4)">
+  <!ENTITY thunderbird-md5sum            "da9c86271bb498c5feb02ce9c360669f">
+  <!ENTITY thunderbird-size              "163 Mo">
+  <!ENTITY thunderbird-buildsize         "4.5 Go (68 Mo installé)">
+  <!ENTITY thunderbird-time              "72 SBU">
 ]>
 <sect1 id="thunderbird" xreflabel="Thunderbird-&thunderbird-version;">
   <?dbhtml filename="thunderbird.html" ?>
@@ -280,8 +280,7 @@
 MimeType=text/html;text/xml;application/xhtml+xml;application/xml;application/rss+xml;x-scheme-handler/mailto;
 StartupNotify=true</literal>
 EOF
-ln -sfv /usr/lib/thunderbird-&thunderbird-version;/chrome/icons/default/default256.png \
-        /usr/share/pixmaps/thunderbird.png</userinput>
+ln -sfv /usr/lib/thunderbird-&thunderbird-version;/chrome/icons/default/default256.png         /usr/share/pixmaps/thunderbird.png</userinput>
 </screen>
     </sect3>
   </sect2>

Copied: trunk/blfs/xsoft/other/xscreensaver.xml (from rev 6726, trunk/blfs/general/genutils/xscreensaver.xml)
===================================================================
--- trunk/blfs/xsoft/other/xscreensaver.xml	                        (rev 0)
+++ trunk/blfs/xsoft/other/xscreensaver.xml	2015-01-18 20:30:47 UTC (rev 6727)
@@ -0,0 +1,241 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
+   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+  <!ENTITY % general-entities SYSTEM "../../general.ent">
+  %general-entities;
+  <!ENTITY xscreensaver-download-http "http://www.jwz.org/xscreensaver/xscreensaver-&xscreensaver-version;.tar.gz">
+  <!ENTITY xscreensaver-download-ftp  " ">
+  <!ENTITY xscreensaver-md5sum        "c003f79502e67f46aa5bedf24cbbd77c">
+  <!ENTITY xscreensaver-size          "11 Mo">
+  <!ENTITY xscreensaver-buildsize     "204 Mo">
+  <!ENTITY xscreensaver-time          "1 SBU">
+]>
+<sect1 id="xscreensaver" xreflabel="XScreenSaver-&xscreensaver-version;">
+  <?dbhtml filename="xscreensaver.html"?>
+  <sect1info>
+    <othername>$LastChangedBy : bdubbs $</othername>
+    <date>$Date : 2013-03-15 17:26:39 +0100 (Fri, 15 Mar 2013) $</date>
+  </sect1info>
+  <title>XScreenSaver-&xscreensaver-version;</title>
+  <indexterm zone="xscreensaver">
+    <primary sortas="a-xscreensaver">Xscreensaver</primary>
+  </indexterm>
+  <sect2 role="package">
+    <title>Introduction à XScreenSaver</title>
+    <para>Le paquet <application>XScreenSaver</application> est un économiseur
+    et un verrouilleur d'écran modulaire pour le système X Window. Il est extrêmement
+    personnalisable et il permet l'utilisation de n'importe quel programme
+    qui peut dessiner la fenêtre racine comme mode d'affichage. Le but de
+    <application>XScreenSaver</application> est d'afficher de
+    jolies images sur votre écran lorsqu'il n'est pas utilisé,
+    partant de la philosophie que les moniteurs non surveillés devraient toujours
+    être occupés à des tâches intéressantes, comme ils le font pour les films. Néanmoins,
+    <application>XScreenSaver</application> peut aussi être utilisé comme un
+    verrouilleur d'écran pour empêcher autrui d'utiliser votre terminal
+    lorsque vous êtes occupé.</para>
+   &lfs76_checked;
+    <bridgehead renderas="sect3">Informations sur le paquet</bridgehead>
+    <itemizedlist spacing="compact">
+      <listitem>
+        <para>Téléchargement (HTTP) : <ulink url="&xscreensaver-download-http;"/></para>
+      </listitem>
+      <listitem>
+        <para>Téléchargement (FTP) : <ulink url="&xscreensaver-download-ftp;"/></para>
+      </listitem>
+      <listitem>
+        <para>Somme de contrôle MD5 du téléchargement : &xscreensaver-md5sum;</para>
+      </listitem>
+      <listitem>
+        <para>Taille du téléchargement : &xscreensaver-size;</para>
+      </listitem>
+      <listitem>
+        <para>Estimation de l'espace disque requis : &xscreensaver-buildsize;</para>
+      </listitem>
+      <listitem>
+        <para>Estimation du temps de construction : &xscreensaver-time;</para>
+      </listitem>
+    </itemizedlist>
+    <bridgehead renderas="sect3">Dépendances de XScreenSaver</bridgehead>
+    <bridgehead renderas="sect4">Requises</bridgehead>
+    <para role="required">
+      <xref linkend="libglade"/> et
+      <xref linkend="xorg7-app"/>
+    </para>
+    <bridgehead renderas="sect4">Recommandées</bridgehead>
+    <para role="recommended">
+      <xref linkend="glu"/>
+    </para>
+<bridgehead renderas="sect4">Facultatives</bridgehead>
+    <para role="optional">
+      <ulink url="&gnome-download-http;/gdm/">GDM</ulink>,
+      <ulink url="http://linas.org/gle/">GLE</ulink> et
+      <xref linkend="linux-pam"/>
+    </para>
+    <para condition="html" role="usernotes">Notes utilisateur :
+    <ulink url="&blfs-wiki;/xscreensaver"/></para>
+  </sect2>
+  <sect2 role="installation">
+    <title>Installation de XScreenSaver</title>
+    <para>Installez <application>XScreenSaver</application> en lançant les commandes
+    suivantes :</para>
+<screen>
+<userinput>./configure --prefix=/usr &&
+make</userinput>
+</screen>
+    <para>Ce paquet n'est pas fourni avec une suite de tests.</para>
+    <para>Maintenant, en tant qu'utilisateur <systemitem class="username">root</systemitem> :</para>
+<screen role="root">
+<userinput>make install</userinput>
+</screen>
+  </sect2>
+  <sect2 role="commands">
+    <title>Explication des commandes</title>
+    <para><option>--with-setuid-hacks</option> : Ce paramètre autorise
+    certaines démos à s'installer avec l'uid <systemitem class="username">root</systemitem>,
+    ce qui est nécessaire pour pinger d'autres machines.</para>
+  </sect2>
+  <sect2 role="configuration">
+    <title>Configuration de XScreenSaver</title>
+    <sect3 id="xscreensaver-config">
+      <title>Fichiers de configuration</title>
+      <para>
+        <filename>/etc/X11/app-defaults/XScreenSaver</filename> et
+        <filename>~/.xscreensaver</filename>
+      </para>
+      <indexterm zone="xscreensaver xscreensaver-config">
+        <primary sortas="e-etc-X11-app-defaults-XScreenSaver">/etc/X11/app-defaults/XScreenSaver</primary>
+      </indexterm>
+      <indexterm zone="xscreensaver xscreensaver-config">
+        <primary sortas="e-AA.xscreensaver">~/.xscreensaver</primary>
+      </indexterm>
+    </sect3>
+    <sect3>
+      <title>Configuration avec Linux PAM</title>
+      <para>
+        Si <application>XScreenSaver</application> a été construit avec le
+        support <application>Linux PAM</application>, vous devez créer un fichier
+        de configuration <application>PAM</application> pour que <application>XScreenSaver</application> 
+        fonctionne bien avec BLFS.
+      </para>
+      <para>
+        Lancez les commandes suivantes en tant qu'utilisateur
+        <systemitem class="username">root</systemitem> pour créer le fichier de
+        configuration pour <application>Linux PAM</application> :
+      </para>
+<screen role="root">
+<userinput>cat > /etc/pam.d/xscreensaver << "EOF"
+<literal># Begin /etc/pam.d/xscreensaver
+auth    include system-auth
+account include system-account
+# End /etc/pam.d/xscreensaver</literal>
+EOF</userinput>
+</screen>
+    </sect3>
+  </sect2>
+  <sect2 role="content">
+    <title>Contenu</title>
+    <segmentedlist>
+      <segtitle>Programmes installés</segtitle>
+      <segtitle>Bibliothèque installée</segtitle>
+      <segtitle>Répertoires installés</segtitle>
+      <seglistitem>
+        <seg>
+          xscreensaver, xscreensaver-command, xscreensaver-demo, xscreensaver-getimage,
+          xscreensaver-getimage-file, xscreensaver-getimage-video,
+          xscreensaver-gl-helper et xscreensaver-text
+        </seg>
+        <seg>Aucune</seg>
+        <seg>
+          /usr/libexec/xscreensaver et /usr/share/xscreensaver
+        </seg>
+      </seglistitem>
+    </segmentedlist>
+    <variablelist>
+      <bridgehead renderas="sect3">Descriptions courtes</bridgehead>
+      <?dbfo list-presentation="list"?>
+      <?dbhtml list-presentation="table"?>
+      <varlistentry id="xscreensaver-prog">
+        <term><command>xscreensaver</command></term>
+        <listitem>
+          <para>est un démon d'économiseur et de verrouilleur d'écran.</para>
+          <indexterm zone="xscreensaver xscreensaver-prog">
+            <primary sortas="b-xscreensaver">xscreensaver</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+      <varlistentry id="xscreensaver-command">
+        <term><command>xscreensaver-command</command></term>
+        <listitem>
+          <para>contrôle un processus <command>xscreensaver</command>
+          en cours d'exécution en lui envoyant des messages de client.</para>
+          <indexterm zone="xscreensaver xscreensaver-command">
+            <primary sortas="b-xscreensaver-command">xscreensaver-command</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+      <varlistentry id="xscreensaver-demo">
+        <term><command>xscreensaver-demo</command></term>
+        <listitem>
+          <para>est une interface graphique pour régler les paramètres
+          utilisés par le démon <command>xscreensaver</command> en arrière-plan.</para>
+          <indexterm zone="xscreensaver xscreensaver-demo">
+            <primary sortas="b-xscreensaver-demo">xscreensaver-demo</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+      <varlistentry id="xscreensaver-getimage">
+        <term><command>xscreensaver-getimage</command></term>
+        <listitem>
+          <para>est un programme d'aide pour les modules
+          <command>xscreensaver</command> pour la manipulation
+          d'images.</para>
+          <indexterm zone="xscreensaver xscreensaver-getimage">
+            <primary sortas="b-xscreensaver-getimaage">xscreensaver-getimage</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+      <varlistentry id="xscreensaver-getimage-file">
+        <term><command>xscreensaver-getimage-file</command></term>
+		<listitem>
+          <para>est un programme d'aide pour les modules
+          <command>xscreensaver</command> pour la manipulation
+          d'images.</para>
+          <indexterm zone="xscreensaver xscreensaver-getimage-file">
+            <primary sortas="b-xscreensaver-getimaage-file">xscreensaver-getimage-file</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+      <varlistentry id="xscreensaver-getimage-video">
+        <term><command>xscreensaver-getimage-video</command></term>
+        <listitem>
+          <para>est un programme d'aide pour les modules
+          <command>xscreensaver</command> pour la manipulation
+          d'images.</para>
+          <indexterm zone="xscreensaver xscreensaver-getimage-video">
+            <primary sortas="b-xscreensaver-getimaage-video">xscreensaver-getimage-video</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+      <varlistentry id="xscreensaver-gl-helper">
+        <term><command>xscreensaver-gl-helper</command></term>
+        <listitem>
+          <para>est un programme d'aide pour les modules OPenGL
+          <command>xscreensaver</command>.</para>
+          <indexterm zone="xscreensaver xscreensaver-gl-helper">
+            <primary sortas="b-xscreensaver-gl-helper">xscreensaver-gl-helper</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+      <varlistentry id="xscreensaver-text">
+        <term><command>xscreensaver-text</command></term>
+        <listitem>
+          <para>affiche du texte sur la sortie standard, pour être utilisé par
+          les économiseurs d'écran.</para>
+          <indexterm zone="xscreensaver xscreensaver-text">
+            <primary sortas="b-xscreensaver-text">xscreensaver-text</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </sect2>
+</sect1>



More information about the lfs-traducfr mailing list