[lfs-fr] r4643 - trunk/blfs/traduc/commits

myou72 at orange.fr myou72 at orange.fr
Jeu 3 Oct 09:19:27 PDT 2013


Author: myou72
Date: 2013-10-03 18:19:27 +0200 (Thu, 03 Oct 2013)
New Revision: 4643

Modified:
   trunk/blfs/traduc/commits/r3.txt
   trunk/blfs/traduc/commits/r46.txt
Log:
[BLFS-EN] r46.txt

Modified: trunk/blfs/traduc/commits/r3.txt
===================================================================
--- trunk/blfs/traduc/commits/r3.txt	2013-10-03 16:18:21 UTC (rev 4642)
+++ trunk/blfs/traduc/commits/r3.txt	2013-10-03 16:19:27 UTC (rev 4643)
@@ -1,4815 +0,0 @@
-Révision 49
-
-fichiers modifiés :
-   basicnet/mailnews/procmail/procmail-exp.xml
-   basicnet/mailnews/procmail/procmail-desc.xml
-   basicnet/mailnews/procmail/procmail-config.xml
-
-Log :
-Initial revision
-
-Le robot a traité 66 % du commit anglais
-Index: basicnet/mailnews/procmail/procmail-config.xml
-===================================================================
---- basicnet/mailnews/procmail/procmail-config.xml	(révision 48)
-+++ basicnet/mailnews/procmail/procmail-config.xml	(révision 49)
-@@ -7,8 +7,9 @@
- 
- <sect3><title>Configuration Information</title>
- 
--<para><userinput>To be done</userinput> .
--</para>
-+<para>Recipes have to be written and placed in your
-+<filename>~/.procmailrc</filename> for execution. The procmailex man
-+page is the starting place to learn how to write recipies.</para>
- </sect3>
- 
- </sect2>
-Index: basicnet/mailnews/procmail/procmail-exp.xml
-===================================================================
---- basicnet/mailnews/procmail/procmail-exp.xml	(révision 48)
-+++ basicnet/mailnews/procmail/procmail-exp.xml	(révision 49)
-@@ -1,8 +1,9 @@
- <sect2>
- <title>Command explanations</title>
- 
--<para><userinput>BASENAME=/usr :</userinput> To Be Done.</para>
-+<para><userinput>BASENAME=/usr :</userinput> The equivilant of <userinput>./configure --prefix=/usr</userinput> on other package installations.</para>
- 
--<para><userinput>make install-suid :</userinput> To Be Done.</para>
-+<para><userinput>make install-suid :</userinput> Modifies permissions of
-+the installed files.</para>
- </sect2>
- 
-Index: basicnet/mailnews/procmail/procmail-desc.xml
-===================================================================
---- basicnet/mailnews/procmail/procmail-desc.xml	(révision 48)
-+++ basicnet/mailnews/procmail/procmail-desc.xml	(révision 49)
-@@ -1,8 +1,7 @@
- <sect2>
- <title>Contents</title>
- 
--<para>The procmail package contains <userinput>procmail</userinput>  and
--<userinput>lockfile</userinput>.</para>
-+<para>The procmail package contains <userinput>procmail</userinput>, <userinput>formail</userinput>, <userinput>lockfile</userinput> and <userinput>mailstat</userinput>.</para>
- 
- </sect2>
- 
-@@ -12,9 +11,17 @@
- <para>procmail is an autonomous mail processor.  It performs all the
- functions of a MDA (Mail Delivery Agent).</para></sect3>
- 
-+<sect3><title>formail</title>
-+<para>formail is a filter that can be used to format mail into mailbox
-+format.</para></sect3>
-+
- <sect3><title>lockfile</title>
- <para>lockfile is a utilitiy that can lock a file for single use
- interactively or in a script.</para></sect3>
- 
-+<sect3><title>mailstat</title>
-+<para>mailstat prints a summary report of mail that has been filtered by
-+procmail since the last time mailstat was ran.</para></sect3>
-+
- </sect2>
- 
-g.xml	(révision 0)
-+++ general/graphlib/libpng.xml	(révision 3)
-@@ -0,0 +1,12 @@
-+<sect1 id="libpng" xreflabel="libpng-&libpng-version;">
-+<?dbhtml filename="libpng.html" dir="general"?>
-+<title>libpng-&libpng-version;</title>
-+
-+&libpng-intro;
-+&libpng-inst;
-+&libpng-exp;
-+&libpng-config;
-+&libpng-desc;
-+
-+</sect1>
-+
---- general/graphlib/libpng.xml	(révision 0)
-+++ general/graphlib/libpng.xml	(révision 3)
-@@ -0,0 +1,12 @@
-+<sect1 id="libpng" xreflabel="libpng-&libpng-version;">
-+<?dbhtml filename="libpng.html" dir="general"?>
-+<title>libpng-&libpng-version;</title>
-+
-+&libpng-intro;
-+&libpng-inst;
-+&libpng-exp;
-+&libpng-config;
-+&libpng-desc;
-+
-+</sect1>
-+
-
-Index: general/graphlib/libtiff/libtiff-config.xml
-===================================================================
---- general/graphlib/libtiff/libtiff-config.xml	(révision 0)
-+++ general/graphlib/libtiff/libtiff-config.xml	(révision 3)
-@@ -0,0 +1,11 @@
-+<sect2>
-+<title>Configuring libtiff</title>
-+<sect3><title>Configuration Information</title>
-+&library-config;
-+</sect3>
-+</sect2>
---- general/graphlib/libtiff/libtiff-config.xml	(révision 0)
-+++ general/graphlib/libtiff/libtiff-config.xml	(révision 3)
-@@ -0,0 +1,11 @@
-+<sect2>
-+<title>Configuring libtiff</title>
-+
-+<sect3><title>Configuration Information</title>
-+
-+&library-config;
-+
-+</sect3>
-+
-+</sect2>
-+
---- general/graphlib/libtiff/libtiff-config.xml	(révision 0)
-+++ general/graphlib/libtiff/libtiff-config.xml	(révision 3)
-@@ -0,0 +1,11 @@
-+<sect2>
-+<title>Configuring libtiff</title>
-+
-+<sect3><title>Configuration Information</title>
-+
-+&library-config;
-+
-+</sect3>
-+
-+</sect2>
-+
-
-Index: general/graphlib/libtiff/libtiff-desc.xml
-===================================================================
---- general/graphlib/libtiff/libtiff-desc.xml	(révision 0)
-+++ general/graphlib/libtiff/libtiff-desc.xml	(révision 3)
-@@ -0,0 +1,80 @@
-+<sect2>
-+<title>Contents</title>
-+<para>The libtiff package contains <userinput>fax2ps, fax2tiff, gif2tiff, 
-+pal2rgb, ppm2tiff, ras2tiff, rgb2ycbcr, thumbnail, tiff2bw, tiff2ps,
-+tiff2rgba, tiffcmp, tiffcp, tiffdither, tiffdump, tiffinfo, tiffmedian,
-+tiffsplit</userinput> and the <userinput>tiff libraries</userinput></para>
-+</sect2>
-+<sect2><title>Description</title>
-+<sect3><title>fax2ps</title>
-+<para>fac2ps converts a TIFF facsimile to compressed postscript 
-+file</para></sect3>
-+<sect3><title>fax2tiff</title>
-+<para>fax2tiff creates a TIFF Class F fax file from raw fax 
-+data</para></sect3>
-+<sect3><title>gif2tiff</title>
-+<para>gif2tiff creates a TIFF file from a GIF87 format image 
-+file</para></sect3>
-+<sect3><title>pal2rgb</title>
-+<para>pal2rgb converts a palette color TIFF image to a full 
-+color image</para></sect3>
-+<sect3><title>ppm2tiff</title>
-+<para>ppm2tiff creates a TIFF file from a PPM image file</para></sect3>
-+<sect3><title>ras2tiff</title>
-+<para>ras2tiff creates a TIFF file from a Sun rasterfile</para></sect3>
-+<sect3><title>rgb2ycbcr</title>
-+<para>rgb2ycbcr converts non-YCbCr TIFF images to a YCbCr TIFF 
-+image</para></sect3>
-+<sect3><title>thumbnail</title>
-+<para>thumbnail creates a TIFF file with thumbnail images</para></sect3>
-+<sect3><title>tiff2bw</title>
-+<para>tiff2bw converts a color TIFF image to greyscale</para></sect3>
-+<sect3><title>tiff2ps</title>
-+<para>tiff2ps converts a TIFF image to a postscript file</para></sect3>
-+<sect3><title>tiff2rgba</title>
-+<para>No description available</para></sect3>
-+<sect3><title>tiffcmp</title>
-+<para>tiffcmp compares two TIFF files</para></sect3>
-+<sect3><title>tiffcp</title>
-+<para>tiffcp copies (and possibly converts) a TIFF file</para></sect3>
-+<sect3><title>tiffdither</title>
-+<para>tiffdither converts a greyscale image to bilevel using 
-+dithering</para></sect3>
-+<sect3><title>tiffdump</title>
-+<para>tiffdump prints verbatim information about TIFF files</para></sect3>
-+<sect3><title>tiffinfo</title>
-+<para>tiffinfo prints information about TIFF files</para></sect3>
-+<sect3><title>tiffmedian</title>
-+<para>tiffmedian applies the median cut algorithm to data in a 
-+TIFF file</para></sect3>
-+<sect3><title>tiffsplit</title>
-+<para>tiffsplit splits a multi-image TIFF into single-image 
-+TIFF files</para></sect3>
-+<sect3><title>tiff libraries</title>
-+<para>The tiff libraries are used by many programs to read and write
-+tiff files</para></sect3>
-+</sect2>
---- general/graphlib/libtiff/libtiff-desc.xml	(révision 0)
-+++ general/graphlib/libtiff/libtiff-desc.xml	(révision 3)
-@@ -0,0 +1,80 @@
-+<sect2>
-+<title>Contents</title>
-+
-+<para>The libtiff package contains <userinput>fax2ps, fax2tiff, gif2tiff, 
-+pal2rgb, ppm2tiff, ras2tiff, rgb2ycbcr, thumbnail, tiff2bw, tiff2ps,
-+tiff2rgba, tiffcmp, tiffcp, tiffdither, tiffdump, tiffinfo, tiffmedian,
-+tiffsplit</userinput> and the <userinput>tiff libraries</userinput></para>
-+
-+</sect2>
-+
-+<sect2><title>Description</title>
-+
-+<sect3><title>fax2ps</title>
-+<para>fac2ps converts a TIFF facsimile to compressed postscript 
-+file</para></sect3>
-+
-+<sect3><title>fax2tiff</title>
-+<para>fax2tiff creates a TIFF Class F fax file from raw fax 
-+data</para></sect3>
-+
-+<sect3><title>gif2tiff</title>
-+<para>gif2tiff creates a TIFF file from a GIF87 format image 
-+file</para></sect3>
-+
-+<sect3><title>pal2rgb</title>
-+<para>pal2rgb converts a palette color TIFF image to a full 
-+color image</para></sect3>
-+
-+<sect3><title>ppm2tiff</title>
-+<para>ppm2tiff creates a TIFF file from a PPM image file</para></sect3>
-+
-+<sect3><title>ras2tiff</title>
-+<para>ras2tiff creates a TIFF file from a Sun rasterfile</para></sect3>
-+
-+<sect3><title>rgb2ycbcr</title>
-+<para>rgb2ycbcr converts non-YCbCr TIFF images to a YCbCr TIFF 
-+image</para></sect3>
-+
-+<sect3><title>thumbnail</title>
-+<para>thumbnail creates a TIFF file with thumbnail images</para></sect3>
-+
-+<sect3><title>tiff2bw</title>
-+<para>tiff2bw converts a color TIFF image to greyscale</para></sect3>
-+
-+<sect3><title>tiff2ps</title>
-+<para>tiff2ps converts a TIFF image to a postscript file</para></sect3>
-+
-+<sect3><title>tiff2rgba</title>
-+<para>No description available</para></sect3>
-+
-+<sect3><title>tiffcmp</title>
-+<para>tiffcmp compares two TIFF files</para></sect3>
-+
-+<sect3><title>tiffcp</title>
-+<para>tiffcp copies (and possibly converts) a TIFF file</para></sect3>
-+
-+<sect3><title>tiffdither</title>
-+<para>tiffdither converts a greyscale image to bilevel using 
-+dithering</para></sect3>
-+
-+<sect3><title>tiffdump</title>
-+<para>tiffdump prints verbatim information about TIFF files</para></sect3>
-+
-+<sect3><title>tiffinfo</title>
-+<para>tiffinfo prints information about TIFF files</para></sect3>
-+
-+<sect3><title>tiffmedian</title>
-+<para>tiffmedian applies the median cut algorithm to data in a 
-+TIFF file</para></sect3>
-+
-+<sect3><title>tiffsplit</title>
-+<para>tiffsplit splits a multi-image TIFF into single-image 
-+TIFF files</para></sect3>
-+
-+<sect3><title>tiff libraries</title>
-+<para>The tiff libraries are used by many programs to read and write
-+tiff files</para></sect3>
-+
-+</sect2>
-+
---- general/graphlib/libtiff/libtiff-desc.xml	(révision 0)
-+++ general/graphlib/libtiff/libtiff-desc.xml	(révision 3)
-@@ -0,0 +1,80 @@
-+<sect2>
-+<title>Contents</title>
-+
-+<para>The libtiff package contains <userinput>fax2ps, fax2tiff, gif2tiff, 
-+pal2rgb, ppm2tiff, ras2tiff, rgb2ycbcr, thumbnail, tiff2bw, tiff2ps,
-+tiff2rgba, tiffcmp, tiffcp, tiffdither, tiffdump, tiffinfo, tiffmedian,
-+tiffsplit</userinput> and the <userinput>tiff libraries</userinput></para>
-+
-+</sect2>
-+
-+<sect2><title>Description</title>
-+
-+<sect3><title>fax2ps</title>
-+<para>fac2ps converts a TIFF facsimile to compressed postscript 
-+file</para></sect3>
-+
-+<sect3><title>fax2tiff</title>
-+<para>fax2tiff creates a TIFF Class F fax file from raw fax 
-+data</para></sect3>
-+
-+<sect3><title>gif2tiff</title>
-+<para>gif2tiff creates a TIFF file from a GIF87 format image 
-+file</para></sect3>
-+
-+<sect3><title>pal2rgb</title>
-+<para>pal2rgb converts a palette color TIFF image to a full 
-+color image</para></sect3>
-+
-+<sect3><title>ppm2tiff</title>
-+<para>ppm2tiff creates a TIFF file from a PPM image file</para></sect3>
-+
-+<sect3><title>ras2tiff</title>
-+<para>ras2tiff creates a TIFF file from a Sun rasterfile</para></sect3>
-+
-+<sect3><title>rgb2ycbcr</title>
-+<para>rgb2ycbcr converts non-YCbCr TIFF images to a YCbCr TIFF 
-+image</para></sect3>
-+
-+<sect3><title>thumbnail</title>
-+<para>thumbnail creates a TIFF file with thumbnail images</para></sect3>
-+
-+<sect3><title>tiff2bw</title>
-+<para>tiff2bw converts a color TIFF image to greyscale</para></sect3>
-+
-+<sect3><title>tiff2ps</title>
-+<para>tiff2ps converts a TIFF image to a postscript file</para></sect3>
-+
-+<sect3><title>tiff2rgba</title>
-+<para>No description available</para></sect3>
-+
-+<sect3><title>tiffcmp</title>
-+<para>tiffcmp compares two TIFF files</para></sect3>
-+
-+<sect3><title>tiffcp</title>
-+<para>tiffcp copies (and possibly converts) a TIFF file</para></sect3>
-+
-+<sect3><title>tiffdither</title>
-+<para>tiffdither converts a greyscale image to bilevel using 
-+dithering</para></sect3>
-+
-+<sect3><title>tiffdump</title>
-+<para>tiffdump prints verbatim information about TIFF files</para></sect3>
-+
-+<sect3><title>tiffinfo</title>
-+<para>tiffinfo prints information about TIFF files</para></sect3>
-+
-+<sect3><title>tiffmedian</title>
-+<para>tiffmedian applies the median cut algorithm to data in a 
-+TIFF file</para></sect3>
-+
-+<sect3><title>tiffsplit</title>
-+<para>tiffsplit splits a multi-image TIFF into single-image 
-+TIFF files</para></sect3>
-+
-+<sect3><title>tiff libraries</title>
-+<para>The tiff libraries are used by many programs to read and write
-+tiff files</para></sect3>
-+
-+</sect2>
-+
-
-Index: general/graphlib/libtiff/libtiff.ent
-===================================================================
---- general/graphlib/libtiff/libtiff.ent	(révision 0)
-+++ general/graphlib/libtiff/libtiff.ent	(révision 3)
-@@ -0,0 +1,10 @@
-+<!ENTITY libtiff SYSTEM "../libtiff.xml">
-+<!ENTITY libtiff-intro SYSTEM "libtiff-intro.xml">
-+<!ENTITY libtiff-inst SYSTEM "libtiff-inst.xml">
-+<!ENTITY libtiff-exp SYSTEM "libtiff-exp.xml">
-+<!ENTITY libtiff-desc SYSTEM "libtiff-desc.xml">
-+<!ENTITY libtiff-config SYSTEM "libtiff-config.xml">
-+<!ENTITY libtiff-buildsize "5.9 MB">
-+<!ENTITY libtiff-version "3.5.7">
-+<!ENTITY libtiff-download "ftp://ftp.remotesensing.org/pub/libtiff/tiff-v3.5.7.tar.gz">
-+<!ENTITY libtiff-size "928 KB">
---- general/graphlib/libtiff/libtiff.ent	(révision 0)
-+++ general/graphlib/libtiff/libtiff.ent	(révision 3)
-@@ -0,0 +1,10 @@
-+<!ENTITY libtiff SYSTEM "../libtiff.xml">
-+<!ENTITY libtiff-intro SYSTEM "libtiff-intro.xml">
-+<!ENTITY libtiff-inst SYSTEM "libtiff-inst.xml">
-+<!ENTITY libtiff-exp SYSTEM "libtiff-exp.xml">
-+<!ENTITY libtiff-desc SYSTEM "libtiff-desc.xml">
-+<!ENTITY libtiff-config SYSTEM "libtiff-config.xml">
-+<!ENTITY libtiff-buildsize "5.9 MB">
-+<!ENTITY libtiff-version "3.5.7">
-+<!ENTITY libtiff-download "ftp://ftp.remotesensing.org/pub/libtiff/tiff-v3.5.7.tar.gz">
-+<!ENTITY libtiff-size "928 KB">
---- general/graphlib/libtiff/libtiff.ent	(révision 0)
-+++ general/graphlib/libtiff/libtiff.ent	(révision 3)
-@@ -0,0 +1,10 @@
-+<!ENTITY libtiff SYSTEM "../libtiff.xml">
-+<!ENTITY libtiff-intro SYSTEM "libtiff-intro.xml">
-+<!ENTITY libtiff-inst SYSTEM "libtiff-inst.xml">
-+<!ENTITY libtiff-exp SYSTEM "libtiff-exp.xml">
-+<!ENTITY libtiff-desc SYSTEM "libtiff-desc.xml">
-+<!ENTITY libtiff-config SYSTEM "libtiff-config.xml">
-+<!ENTITY libtiff-buildsize "5.9 MB">
-+<!ENTITY libtiff-version "3.5.7">
-+<!ENTITY libtiff-download "ftp://ftp.remotesensing.org/pub/libtiff/tiff-v3.5.7.tar.gz">
-+<!ENTITY libtiff-size "928 KB">
-
-Index: general/graphlib/libtiff/libtiff-exp.xml
-===================================================================
---- general/graphlib/libtiff/libtiff-exp.xml	(révision 0)
-+++ general/graphlib/libtiff/libtiff-exp.xml	(révision 3)
-@@ -0,0 +1,19 @@
-+<sect2>
-+<title>Command explanations</title>
-+<para><userinput>--noninteractive :</userinput> This switch is used to
-+avoid the configuration routine asking for confirmation of the
-+directories to install to (which we pass using switches to configure
-+anyways).</para> 
-+<para><userinput>--with-GCOPTS="$CFLAGS" :</userinput> This switch
-+causes libtiff to be built using the options we have set in $CFLAGS
-+(which most other packages handle automatically).</para>
-+<para><userinput>--with-DIR_MAN=/usr/share/man :</userinput> This is
-+used because despite the fact we pass --prefix=/usr, the configure
-+routine tries to install the man-pages in /usr/local/man instead of the
-+correct place.</para>
-+</sect2>
---- general/graphlib/libtiff/libtiff-exp.xml	(révision 0)
-+++ general/graphlib/libtiff/libtiff-exp.xml	(révision 3)
-@@ -0,0 +1,19 @@
-+<sect2>
-+<title>Command explanations</title>
-+
-+<para><userinput>--noninteractive :</userinput> This switch is used to
-+avoid the configuration routine asking for confirmation of the
-+directories to install to (which we pass using switches to configure
-+anyways).</para> 
-+
-+<para><userinput>--with-GCOPTS="$CFLAGS" :</userinput> This switch
-+causes libtiff to be built using the options we have set in $CFLAGS
-+(which most other packages handle automatically).</para>
-+
-+<para><userinput>--with-DIR_MAN=/usr/share/man :</userinput> This is
-+used because despite the fact we pass --prefix=/usr, the configure
-+routine tries to install the man-pages in /usr/local/man instead of the
-+correct place.</para>
-+
-+</sect2>
-+
---- general/graphlib/libtiff/libtiff-exp.xml	(révision 0)
-+++ general/graphlib/libtiff/libtiff-exp.xml	(révision 3)
-@@ -0,0 +1,19 @@
-+<sect2>
-+<title>Command explanations</title>
-+
-+<para><userinput>--noninteractive :</userinput> This switch is used to
-+avoid the configuration routine asking for confirmation of the
-+directories to install to (which we pass using switches to configure
-+anyways).</para> 
-+
-+<para><userinput>--with-GCOPTS="$CFLAGS" :</userinput> This switch
-+causes libtiff to be built using the options we have set in $CFLAGS
-+(which most other packages handle automatically).</para>
-+
-+<para><userinput>--with-DIR_MAN=/usr/share/man :</userinput> This is
-+used because despite the fact we pass --prefix=/usr, the configure
-+routine tries to install the man-pages in /usr/local/man instead of the
-+correct place.</para>
-+
-+</sect2>
-+
-
-Index: general/graphlib/libtiff/libtiff-inst.xml
-===================================================================
---- general/graphlib/libtiff/libtiff-inst.xml	(révision 0)
-+++ general/graphlib/libtiff/libtiff-inst.xml	(révision 3)
-@@ -0,0 +1,12 @@
-+<sect2>
-+<title>Installation of libtiff</title>
-+<para>Install libtiff by running the following commands:</para>
-+<para><screen><userinput>./configure --prefix=/usr --noninteractive \
-+   --with-GCOPTS="$CFLAGS" --with-DIR_MAN=/usr/share/man &&
-+make &&
-+make install</userinput></screen></para>
-+</sect2>
---- general/graphlib/libtiff/libtiff-inst.xml	(révision 0)
-+++ general/graphlib/libtiff/libtiff-inst.xml	(révision 3)
-@@ -0,0 +1,12 @@
-+<sect2>
-+<title>Installation of libtiff</title>
-+
-+<para>Install libtiff by running the following commands:</para>
-+
-+<para><screen><userinput>./configure --prefix=/usr --noninteractive \
-+   --with-GCOPTS="$CFLAGS" --with-DIR_MAN=/usr/share/man &&
-+make &&
-+make install</userinput></screen></para>
-+
-+</sect2>
-+
---- general/graphlib/libtiff/libtiff-inst.xml	(révision 0)
-+++ general/graphlib/libtiff/libtiff-inst.xml	(révision 3)
-@@ -0,0 +1,12 @@
-+<sect2>
-+<title>Installation of libtiff</title>
-+
-+<para>Install libtiff by running the following commands:</para>
-+
-+<para><screen><userinput>./configure --prefix=/usr --noninteractive \
-+   --with-GCOPTS="$CFLAGS" --with-DIR_MAN=/usr/share/man &&
-+make &&
-+make install</userinput></screen></para>
-+
-+</sect2>
-+
-
-Index: general/graphlib/libtiff/libtiff-intro.xml
-===================================================================
---- general/graphlib/libtiff/libtiff-intro.xml	(révision 0)
-+++ general/graphlib/libtiff/libtiff-intro.xml	(révision 3)
-@@ -0,0 +1,14 @@
-+<sect2>
-+<title>Introduction to libtiff</title>
-+<screen>Download location:              <ulink url="&libtiff-download;"/>
-+Version used:                   &libtiff-version;
-+Package size:                   &libtiff-size;
-+Estimated Disk space required:  &libtiff-buildsize;</screen>
-+<para>The libtiff package contains the tiff libraries and associated
-+utilities.  The libraries are used by many programs for reading and
-+writing tiff files and the utilities are useful for general work with
-+tiff files.</para>
-+</sect2>
---- general/graphlib/libtiff/libtiff-intro.xml	(révision 0)
-+++ general/graphlib/libtiff/libtiff-intro.xml	(révision 3)
-@@ -0,0 +1,14 @@
-+<sect2>
-+<title>Introduction to libtiff</title>
-+
-+<screen>Download location:              <ulink url="&libtiff-download;"/>
-+Version used:                   &libtiff-version;
-+Package size:                   &libtiff-size;
-+Estimated Disk space required:  &libtiff-buildsize;</screen>
-+
-+<para>The libtiff package contains the tiff libraries and associated
-+utilities.  The libraries are used by many programs for reading and
-+writing tiff files and the utilities are useful for general work with
-+tiff files.</para>
-+
-+</sect2>
---- general/graphlib/libtiff/libtiff-intro.xml	(révision 0)
-+++ general/graphlib/libtiff/libtiff-intro.xml	(révision 3)
-@@ -0,0 +1,14 @@
-+<sect2>
-+<title>Introduction to libtiff</title>
-+
-+<screen>Download location:              <ulink url="&libtiff-download;"/>
-+Version used:                   &libtiff-version;
-+Package size:                   &libtiff-size;
-+Estimated Disk space required:  &libtiff-buildsize;</screen>
-+
-+<para>The libtiff package contains the tiff libraries and associated
-+utilities.  The libraries are used by many programs for reading and
-+writing tiff files and the utilities are useful for general work with
-+tiff files.</para>
-+
-+</sect2>
-
-Index: general/graphlib/libtiff.xml
-===================================================================
---- general/graphlib/libtiff.xml	(révision 0)
-+++ general/graphlib/libtiff.xml	(révision 3)
-@@ -0,0 +1,12 @@
-+<sect1 id="libtiff" xreflabel="libtiff-&libtiff-version;">
-+<?dbhtml filename="libtiff.html" dir="general"?>
-+<title>libtiff-&libtiff-version;</title>
-+&libtiff-intro;
-+&libtiff-inst;
-+&libtiff-exp;
-+&libtiff-config;
-+&libtiff-desc;
-+</sect1>
---- general/graphlib/libtiff.xml	(révision 0)
-+++ general/graphlib/libtiff.xml	(révision 3)
-@@ -0,0 +1,12 @@
-+<sect1 id="libtiff" xreflabel="libtiff-&libtiff-version;">
-+<?dbhtml filename="libtiff.html" dir="general"?>
-+<title>libtiff-&libtiff-version;</title>
-+
-+&libtiff-intro;
-+&libtiff-inst;
-+&libtiff-exp;
-+&libtiff-config;
-+&libtiff-desc;
-+
-+</sect1>
-+
---- general/graphlib/libtiff.xml	(révision 0)
-+++ general/graphlib/libtiff.xml	(révision 3)
-@@ -0,0 +1,12 @@
-+<sect1 id="libtiff" xreflabel="libtiff-&libtiff-version;">
-+<?dbhtml filename="libtiff.html" dir="general"?>
-+<title>libtiff-&libtiff-version;</title>
-+
-+&libtiff-intro;
-+&libtiff-inst;
-+&libtiff-exp;
-+&libtiff-config;
-+&libtiff-desc;
-+
-+</sect1>
-+
-
-Index: general/graphlib/libungif/libungif-config.xml
-===================================================================
---- general/graphlib/libungif/libungif-config.xml	(révision 0)
-+++ general/graphlib/libungif/libungif-config.xml	(révision 3)
-@@ -0,0 +1,10 @@
-+<sect2>
-+<title>Configuring libungif</title>
-+<sect3><title>Configuration Information</title>
-+&library-config;
-+</sect3>
-+</sect2>
---- general/graphlib/libungif/libungif-config.xml	(révision 0)
-+++ general/graphlib/libungif/libungif-config.xml	(révision 3)
-@@ -0,0 +1,10 @@
-+<sect2>
-+<title>Configuring libungif</title>
-+
-+<sect3><title>Configuration Information</title>
-+
-+&library-config;
-+
-+</sect3>
-+
-+</sect2>
---- general/graphlib/libungif/libungif-config.xml	(révision 0)
-+++ general/graphlib/libungif/libungif-config.xml	(révision 3)
-@@ -0,0 +1,10 @@
-+<sect2>
-+<title>Configuring libungif</title>
-+
-+<sect3><title>Configuration Information</title>
-+
-+&library-config;
-+
-+</sect3>
-+
-+</sect2>
-
-Index: general/graphlib/libungif/libungif-desc.xml
-===================================================================
---- general/graphlib/libungif/libungif-desc.xml	(révision 0)
-+++ general/graphlib/libungif/libungif-desc.xml	(révision 3)
-@@ -0,0 +1,106 @@
-+<sect2>
-+<title>Contents</title>
-+<para>The libungif package contains <userinput>gif2epsn, gif2ps, gif2rgb, 
-+gifasm, gifbg, gifburst, gifclip, gifclrmp, gifcolor, gifcomb, gifcompose, 
-+giffiltr, giffix, gifflip, gifhisto, gifinfo, gifinter, gifinto, gifovly, 
-+gifpos, gifrotat, gifrsize, gifspnge, giftext, gifwedge, icon2gif, raw2gif, 
-+rgb2gif, text2gif</userinput> and the <userinput>ungif
-+libraries</userinput>.</para>
-+</sect2>
-+<sect2><title>Description</title>
-+<sect3><title>gif2epsn</title>
-+<para>Dumps images saved as GIF files on Epson type printers.</para></sect3>
-+<sect3><title>gif2ps</title>
-+<para>Print GIF file on laser printers supporting PostScript.</para></sect3>
-+<sect3><title>gif2rgb</title>
-+<para>Convert images saved as GIF to 24-bit RGB image(s).</para></sect3>
-+<sect3><title>gifasm</title>
-+<para>assemble multiple GIFs into one, or burst a 
-+multiple-image GIF.</para></sect3>
-+<sect3><title>gifbg</title>
-+<para>Generate a single-color test pattern GIF.</para></sect3>
-+<sect3><title>gifburst</title>
-+<para>Burst a GIF image into subrectangles.</para></sect3>
-+<sect3><title>gifclip</title>
-+<para>Clip or crop a GIF image.</para></sect3>
-+<sect3><title>gifclrmp</title>
-+<para>Modify GIF image colormaps.</para></sect3>
-+<sect3><title>gifcolor</title>
-+<para>Generate color test patterns.</para></sect3>
-+<sect3><title>gifcomb</title>
-+<para>Combine 2 GIF images of exactly the same size into one.</para></sect3>
-+<sect3><title>gifcompose</title>
-+<para>Use (un)giflib tools to compose images.</para></sect3>
-+<sect3><title>giffiltr</title>
-+<para>Template code for filtering a GIF sequentially.</para></sect3>
-+<sect3><title>giffix</title>
-+<para>Clumsily attempts to fix truncated GIF images.</para></sect3>
-+<sect3><title>gifflip</title>
-+<para>Flip GIF image along X or Y axis or rotate by 90 degrees.</para></sect3>
-+<sect3><title>gifhisto</title>
-+<para>Generate color-frequency histogram from a GIF.</para></sect3>
-+<sect3><title>gifinfo</title>
-+<para>Gives information on a GIF file.</para></sect3>
-+<sect3><title>gifinter</title>
-+<para>Convert between interlaced and non interlaced images.</para></sect3>
-+<sect3><title>gifinto</title>
-+<para>End-of-pipe fitting for GIF-processing pipelines.</para></sect3>
-+<sect3><title>gifovly</title>
-+<para>Generate one composite GIF from a multiple-image GIF.</para></sect3>
-+<sect3><title>gifpos</title>
-+<para>Change a GIF's screen size or recondition it.</para></sect3>
-+<sect3><title>gifrotat</title>
-+<para>Rotate a GIF through any desired angle.</para></sect3>
-+<sect3><title>gifrsize</title>
-+<para>Resize a GIF by deletion or duplication of bits.</para></sect3>
-+<sect3><title>gifspnge</title>
-+<para>Template code for filtering a GIF with in-core operations.</para></sect3>
-+<sect3><title>giftext</title>
-+<para>Print (text only) general information about a GIF</para></sect3>
-+<sect3><title>gifwedge</title>
-+<para>Create a test GIF image resembling a color monitor test
-+pattern.</para></sect3>
-+<sect3><title>icon2gif</title>
-+<para>Converter/deconverter to/from an editable text format.</para></sect3>
-+<sect3><title>raw2gif</title>
-+<para>Convert raw 8-bit image data into GIF files.</para></sect3>
-+<sect3><title>rgb2gif</title>
-+<para>Convert 24 bit images to a GIF image using color 
-+quantization.</para></sect3>
-+<sect3><title>text2gif</title>
-+<para>Generate GIF images out of regular text in 8x8 font.</para></sect3>
-+</sect2>
---- general/graphlib/libungif/libungif-desc.xml	(révision 0)
-+++ general/graphlib/libungif/libungif-desc.xml	(révision 3)
-@@ -0,0 +1,106 @@
-+<sect2>
-+<title>Contents</title>
-+
-+<para>The libungif package contains <userinput>gif2epsn, gif2ps, gif2rgb, 
-+gifasm, gifbg, gifburst, gifclip, gifclrmp, gifcolor, gifcomb, gifcompose, 
-+giffiltr, giffix, gifflip, gifhisto, gifinfo, gifinter, gifinto, gifovly, 
-+gifpos, gifrotat, gifrsize, gifspnge, giftext, gifwedge, icon2gif, raw2gif, 
-+rgb2gif, text2gif</userinput> and the <userinput>ungif
-+libraries</userinput>.</para>
-+
-+</sect2>
-+
-+<sect2><title>Description</title>
-+
-+<sect3><title>gif2epsn</title>
-+<para>Dumps images saved as GIF files on Epson type printers.</para></sect3>
-+
-+<sect3><title>gif2ps</title>
-+<para>Print GIF file on laser printers supporting PostScript.</para></sect3>
-+
-+<sect3><title>gif2rgb</title>
-+<para>Convert images saved as GIF to 24-bit RGB image(s).</para></sect3>
-+
-+<sect3><title>gifasm</title>
-+<para>assemble multiple GIFs into one, or burst a 
-+multiple-image GIF.</para></sect3>
-+
-+<sect3><title>gifbg</title>
-+<para>Generate a single-color test pattern GIF.</para></sect3>
-+
-+<sect3><title>gifburst</title>
-+<para>Burst a GIF image into subrectangles.</para></sect3>
-+
-+<sect3><title>gifclip</title>
-+<para>Clip or crop a GIF image.</para></sect3>
-+
-+<sect3><title>gifclrmp</title>
-+<para>Modify GIF image colormaps.</para></sect3>
-+
-+<sect3><title>gifcolor</title>
-+<para>Generate color test patterns.</para></sect3>
-+
-+<sect3><title>gifcomb</title>
-+<para>Combine 2 GIF images of exactly the same size into one.</para></sect3>
-+
-+<sect3><title>gifcompose</title>
-+<para>Use (un)giflib tools to compose images.</para></sect3>
-+
-+<sect3><title>giffiltr</title>
-+<para>Template code for filtering a GIF sequentially.</para></sect3>
-+
-+<sect3><title>giffix</title>
-+<para>Clumsily attempts to fix truncated GIF images.</para></sect3>
-+
-+<sect3><title>gifflip</title>
-+<para>Flip GIF image along X or Y axis or rotate by 90 degrees.</para></sect3>
-+
-+<sect3><title>gifhisto</title>
-+<para>Generate color-frequency histogram from a GIF.</para></sect3>
-+
-+<sect3><title>gifinfo</title>
-+<para>Gives information on a GIF file.</para></sect3>
-+
-+<sect3><title>gifinter</title>
-+<para>Convert between interlaced and non interlaced images.</para></sect3>
-+
-+<sect3><title>gifinto</title>
-+<para>End-of-pipe fitting for GIF-processing pipelines.</para></sect3>
-+
-+<sect3><title>gifovly</title>
-+<para>Generate one composite GIF from a multiple-image GIF.</para></sect3>
-+
-+<sect3><title>gifpos</title>
-+<para>Change a GIF's screen size or recondition it.</para></sect3>
-+
-+<sect3><title>gifrotat</title>
-+<para>Rotate a GIF through any desired angle.</para></sect3>
-+
-+<sect3><title>gifrsize</title>
-+<para>Resize a GIF by deletion or duplication of bits.</para></sect3>
-+
-+<sect3><title>gifspnge</title>
-+<para>Template code for filtering a GIF with in-core operations.</para></sect3>
-+
-+<sect3><title>giftext</title>
-+<para>Print (text only) general information about a GIF</para></sect3>
-+
-+<sect3><title>gifwedge</title>
-+<para>Create a test GIF image resembling a color monitor test
-+pattern.</para></sect3>
-+
-+<sect3><title>icon2gif</title>
-+<para>Converter/deconverter to/from an editable text format.</para></sect3>
-+
-+<sect3><title>raw2gif</title>
-+<para>Convert raw 8-bit image data into GIF files.</para></sect3>
-+
-+<sect3><title>rgb2gif</title>
-+<para>Convert 24 bit images to a GIF image using color 
-+quantization.</para></sect3>
-+
-+<sect3><title>text2gif</title>
-+<para>Generate GIF images out of regular text in 8x8 font.</para></sect3>
-+
-+</sect2>
-+
---- general/graphlib/libungif/libungif-desc.xml	(révision 0)
-+++ general/graphlib/libungif/libungif-desc.xml	(révision 3)
-@@ -0,0 +1,106 @@
-+<sect2>
-+<title>Contents</title>
-+
-+<para>The libungif package contains <userinput>gif2epsn, gif2ps, gif2rgb, 
-+gifasm, gifbg, gifburst, gifclip, gifclrmp, gifcolor, gifcomb, gifcompose, 
-+giffiltr, giffix, gifflip, gifhisto, gifinfo, gifinter, gifinto, gifovly, 
-+gifpos, gifrotat, gifrsize, gifspnge, giftext, gifwedge, icon2gif, raw2gif, 
-+rgb2gif, text2gif</userinput> and the <userinput>ungif
-+libraries</userinput>.</para>
-+
-+</sect2>
-+
-+<sect2><title>Description</title>
-+
-+<sect3><title>gif2epsn</title>
-+<para>Dumps images saved as GIF files on Epson type printers.</para></sect3>
-+
-+<sect3><title>gif2ps</title>
-+<para>Print GIF file on laser printers supporting PostScript.</para></sect3>
-+
-+<sect3><title>gif2rgb</title>
-+<para>Convert images saved as GIF to 24-bit RGB image(s).</para></sect3>
-+
-+<sect3><title>gifasm</title>
-+<para>assemble multiple GIFs into one, or burst a 
-+multiple-image GIF.</para></sect3>
-+
-+<sect3><title>gifbg</title>
-+<para>Generate a single-color test pattern GIF.</para></sect3>
-+
-+<sect3><title>gifburst</title>
-+<para>Burst a GIF image into subrectangles.</para></sect3>
-+
-+<sect3><title>gifclip</title>
-+<para>Clip or crop a GIF image.</para></sect3>
-+
-+<sect3><title>gifclrmp</title>
-+<para>Modify GIF image colormaps.</para></sect3>
-+
-+<sect3><title>gifcolor</title>
-+<para>Generate color test patterns.</para></sect3>
-+
-+<sect3><title>gifcomb</title>
-+<para>Combine 2 GIF images of exactly the same size into one.</para></sect3>
-+
-+<sect3><title>gifcompose</title>
-+<para>Use (un)giflib tools to compose images.</para></sect3>
-+
-+<sect3><title>giffiltr</title>
-+<para>Template code for filtering a GIF sequentially.</para></sect3>
-+
-+<sect3><title>giffix</title>
-+<para>Clumsily attempts to fix truncated GIF images.</para></sect3>
-+
-+<sect3><title>gifflip</title>
-+<para>Flip GIF image along X or Y axis or rotate by 90 degrees.</para></sect3>
-+
-+<sect3><title>gifhisto</title>
-+<para>Generate color-frequency histogram from a GIF.</para></sect3>
-+
-+<sect3><title>gifinfo</title>
-+<para>Gives information on a GIF file.</para></sect3>
-+
-+<sect3><title>gifinter</title>
-+<para>Convert between interlaced and non interlaced images.</para></sect3>
-+
-+<sect3><title>gifinto</title>
-+<para>End-of-pipe fitting for GIF-processing pipelines.</para></sect3>
-+
-+<sect3><title>gifovly</title>
-+<para>Generate one composite GIF from a multiple-image GIF.</para></sect3>
-+
-+<sect3><title>gifpos</title>
-+<para>Change a GIF's screen size or recondition it.</para></sect3>
-+
-+<sect3><title>gifrotat</title>
-+<para>Rotate a GIF through any desired angle.</para></sect3>
-+
-+<sect3><title>gifrsize</title>
-+<para>Resize a GIF by deletion or duplication of bits.</para></sect3>
-+
-+<sect3><title>gifspnge</title>
-+<para>Template code for filtering a GIF with in-core operations.</para></sect3>
-+
-+<sect3><title>giftext</title>
-+<para>Print (text only) general information about a GIF</para></sect3>
-+
-+<sect3><title>gifwedge</title>
-+<para>Create a test GIF image resembling a color monitor test
-+pattern.</para></sect3>
-+
-+<sect3><title>icon2gif</title>
-+<para>Converter/deconverter to/from an editable text format.</para></sect3>
-+
-+<sect3><title>raw2gif</title>
-+<para>Convert raw 8-bit image data into GIF files.</para></sect3>
-+
-+<sect3><title>rgb2gif</title>
-+<para>Convert 24 bit images to a GIF image using color 
-+quantization.</para></sect3>
-+
-+<sect3><title>text2gif</title>
-+<para>Generate GIF images out of regular text in 8x8 font.</para></sect3>
-+
-+</sect2>
-+
-
-Index: general/graphlib/libungif/libungif.ent
-===================================================================
---- general/graphlib/libungif/libungif.ent	(révision 0)
-+++ general/graphlib/libungif/libungif.ent	(révision 3)
-@@ -0,0 +1,9 @@
-+<!ENTITY libungif SYSTEM "../libungif.xml">
-+<!ENTITY libungif-intro SYSTEM "libungif-intro.xml">
-+<!ENTITY libungif-inst SYSTEM "libungif-inst.xml">
-+<!ENTITY libungif-desc SYSTEM "libungif-desc.xml">
-+<!ENTITY libungif-config SYSTEM "libungif-config.xml">
-+<!ENTITY libungif-buildsize "3.1 MB">
-+<!ENTITY libungif-version "4.1.0b1">
-+<!ENTITY libungif-download "http://www.linuxpackages.net/packages/Slackware-8/robert/libungif-4.1.0b1/source/libungif-4.1.0b1.tar.gz">
-+<!ENTITY libungif-size "343 KB">
---- general/graphlib/libungif/libungif.ent	(révision 0)
-+++ general/graphlib/libungif/libungif.ent	(révision 3)
-@@ -0,0 +1,9 @@
-+<!ENTITY libungif SYSTEM "../libungif.xml">
-+<!ENTITY libungif-intro SYSTEM "libungif-intro.xml">
-+<!ENTITY libungif-inst SYSTEM "libungif-inst.xml">
-+<!ENTITY libungif-desc SYSTEM "libungif-desc.xml">
-+<!ENTITY libungif-config SYSTEM "libungif-config.xml">
-+<!ENTITY libungif-buildsize "3.1 MB">
-+<!ENTITY libungif-version "4.1.0b1">
-+<!ENTITY libungif-download "http://www.linuxpackages.net/packages/Slackware-8/robert/libungif-4.1.0b1/source/libungif-4.1.0b1.tar.gz">
-+<!ENTITY libungif-size "343 KB">
---- general/graphlib/libungif/libungif.ent	(révision 0)
-+++ general/graphlib/libungif/libungif.ent	(révision 3)
-@@ -0,0 +1,9 @@
-+<!ENTITY libungif SYSTEM "../libungif.xml">
-+<!ENTITY libungif-intro SYSTEM "libungif-intro.xml">
-+<!ENTITY libungif-inst SYSTEM "libungif-inst.xml">
-+<!ENTITY libungif-desc SYSTEM "libungif-desc.xml">
-+<!ENTITY libungif-config SYSTEM "libungif-config.xml">
-+<!ENTITY libungif-buildsize "3.1 MB">
-+<!ENTITY libungif-version "4.1.0b1">
-+<!ENTITY libungif-download "http://www.linuxpackages.net/packages/Slackware-8/robert/libungif-4.1.0b1/source/libungif-4.1.0b1.tar.gz">
-+<!ENTITY libungif-size "343 KB">
-
-Index: general/graphlib/libungif/libungif-inst.xml
-===================================================================
---- general/graphlib/libungif/libungif-inst.xml	(révision 0)
-+++ general/graphlib/libungif/libungif-inst.xml	(révision 3)
-@@ -0,0 +1,15 @@
-+<sect2>
-+<title>Installation of libungif</title>
-+<para>Install libungif by running the following commands:</para>
-+<para><screen><userinput>./configure --prefix=/usr &&
-+make &&
-+make install</userinput></screen></para>
-+<note><para>If you get an error during the make portion compiling lib/qprinf.c,
-+edit the file and comment out or remove line 14: #include <config.h> 
-+</para></note>
-+</sect2>
---- general/graphlib/libungif/libungif-inst.xml	(révision 0)
-+++ general/graphlib/libungif/libungif-inst.xml	(révision 3)
-@@ -0,0 +1,15 @@
-+<sect2>
-+<title>Installation of libungif</title>
-+
-+<para>Install libungif by running the following commands:</para>
-+
-+<para><screen><userinput>./configure --prefix=/usr &&
-+make &&
-+make install</userinput></screen></para>
-+
-+<note><para>If you get an error during the make portion compiling lib/qprinf.c,
-+edit the file and comment out or remove line 14: #include <config.h> 
-+</para></note>
-+
-+</sect2>
-+
---- general/graphlib/libungif/libungif-inst.xml	(révision 0)
-+++ general/graphlib/libungif/libungif-inst.xml	(révision 3)
-@@ -0,0 +1,15 @@
-+<sect2>
-+<title>Installation of libungif</title>
-+
-+<para>Install libungif by running the following commands:</para>
-+
-+<para><screen><userinput>./configure --prefix=/usr &&
-+make &&
-+make install</userinput></screen></para>
-+
-+<note><para>If you get an error during the make portion compiling lib/qprinf.c,
-+edit the file and comment out or remove line 14: #include <config.h> 
-+</para></note>
-+
-+</sect2>
-+
-
-Index: general/graphlib/libungif/libungif-intro.xml
-===================================================================
-Index: general/graphlib/libungif.xml
-===================================================================
---- general/graphlib/libungif.xml	(révision 0)
-+++ general/graphlib/libungif.xml	(révision 3)
-@@ -0,0 +1,11 @@
-+<sect1 id="libungif" xreflabel="libungif-&libungif-version;">
-+<?dbhtml filename="libungif.html" dir="general"?>
-+<title>libungif-&libungif-version;</title>
-+&libungif-intro;
-+&libungif-inst;
-+&libungif-config;
-+&libungif-desc;
-+</sect1>
---- general/graphlib/libungif.xml	(révision 0)
-+++ general/graphlib/libungif.xml	(révision 3)
-@@ -0,0 +1,11 @@
-+<sect1 id="libungif" xreflabel="libungif-&libungif-version;">
-+<?dbhtml filename="libungif.html" dir="general"?>
-+<title>libungif-&libungif-version;</title>
-+
-+&libungif-intro;
-+&libungif-inst;
-+&libungif-config;
-+&libungif-desc;
-+
-+</sect1>
-+
---- general/graphlib/libungif.xml	(révision 0)
-+++ general/graphlib/libungif.xml	(révision 3)
-@@ -0,0 +1,11 @@
-+<sect1 id="libungif" xreflabel="libungif-&libungif-version;">
-+<?dbhtml filename="libungif.html" dir="general"?>
-+<title>libungif-&libungif-version;</title>
-+
-+&libungif-intro;
-+&libungif-inst;
-+&libungif-config;
-+&libungif-desc;
-+
-+</sect1>
-+
-
-Index: general/prog/jdk.xml
-===================================================================
---- general/prog/jdk.xml	(révision 0)
-+++ general/prog/jdk.xml	(révision 3)
-@@ -0,0 +1,7 @@
-+<sect1 id="jdk" xreflabel="jdk">
-+<?dbhtml filename="jdk.html" dir="general"?>
-+<title>jdk</title>
-+<para>TO BE DONE</para>
-+</sect1>
---- general/prog/jdk.xml	(révision 0)
-+++ general/prog/jdk.xml	(révision 3)
-@@ -0,0 +1,7 @@
-+<sect1 id="jdk" xreflabel="jdk">
-+<?dbhtml filename="jdk.html" dir="general"?>
-+<title>jdk</title>
-+
-+<para>TO BE DONE</para>
-+
-+</sect1>
---- general/prog/jdk.xml	(révision 0)
-+++ general/prog/jdk.xml	(révision 3)
-@@ -0,0 +1,7 @@
-+<sect1 id="jdk" xreflabel="jdk">
-+<?dbhtml filename="jdk.html" dir="general"?>
-+<title>jdk</title>
-+
-+<para>TO BE DONE</para>
-+
-+</sect1>
-
-Index: general/prog/prog.xml
-===================================================================
---- general/prog/prog.xml	(révision 0)
-+++ general/prog/prog.xml	(révision 3)
-@@ -0,0 +1,8 @@
-+<chapter id="general-prog">
-+<?dbhtml filename="prog.html" dir="general"?>
-+<title>Programming</title>
-+&python;
-+&jdk;
-+</chapter>
---- general/prog/prog.xml	(révision 0)
-+++ general/prog/prog.xml	(révision 3)
-@@ -0,0 +1,8 @@
-+<chapter id="general-prog">
-+<?dbhtml filename="prog.html" dir="general"?>
-+<title>Programming</title>
-+
-+&python;
-+&jdk;
-+
-+</chapter>
---- general/prog/prog.xml	(révision 0)
-+++ general/prog/prog.xml	(révision 3)
-@@ -0,0 +1,8 @@
-+<chapter id="general-prog">
-+<?dbhtml filename="prog.html" dir="general"?>
-+<title>Programming</title>
-+
-+&python;
-+&jdk;
-+
-+</chapter>
-
-Index: general/prog/python.xml
-===================================================================
---- general/prog/python.xml	(révision 0)
-+++ general/prog/python.xml	(révision 3)
-@@ -0,0 +1,7 @@
-+<sect1 id="python" xreflabel="python">
-+<?dbhtml filename="python.html" dir="general"?>
-+<title>python</title>
-+<para>TO BE DONE</para>
-+</sect1>
---- general/prog/python.xml	(révision 0)
-+++ general/prog/python.xml	(révision 3)
-@@ -0,0 +1,7 @@
-+<sect1 id="python" xreflabel="python">
-+<?dbhtml filename="python.html" dir="general"?>
-+<title>python</title>
-+
-+<para>TO BE DONE</para>
-+
-+</sect1>
---- general/prog/python.xml	(révision 0)
-+++ general/prog/python.xml	(révision 3)
-@@ -0,0 +1,7 @@
-+<sect1 id="python" xreflabel="python">
-+<?dbhtml filename="python.html" dir="general"?>
-+<title>python</title>
-+
-+<para>TO BE DONE</para>
-+
-+</sect1>
-
-Index: general/sysutils/fcron/fcron-config.xml
-===================================================================
---- general/sysutils/fcron/fcron-config.xml	(révision 0)
-+++ general/sysutils/fcron/fcron-config.xml	(révision 3)
-@@ -0,0 +1,74 @@
-+<sect2>
-+<title>Configuring fcron</title>
-+<sect3><title>make install script</title>
-+<para>After the files are installed, the make install script enters into a
-+configuration routine.  The first test will be for a group named fcron.  If
-+it does not exist, you will be given the command line that the script proposes
-+to run and a prompt for a 'y' or 'n'.  This is repeated to create a user named
-+fcron and to install a script in the init.d directory with the appropriate
-+symbolic links in runlevels 2, 3, 4, and 5.  The final configuation step is to
-+stop any current fcron processes and start the new fcron.  A yes here will stop
-+current fcron processes but will fail to start new fcron.  The following
-+commands will correct this:</para>
-+<para><screen><userinput>cat > /etc/rc.d/init.d/fcron << "EOF"</userinput>
-+#!/bin/sh
-+# Begin $rc_base/init.d/fcron
-+# Based on sysklogd script from LFS-3.1 and earlier.
-+# Rewritten by Gerard Beekmans  - gerard at linuxfromscratch.org
-+source /etc/sysconfig/rc
-+source $rc_functions
-+case "$1" in
-+        start)
-+                echo "Starting fcron..."
-+                loadproc fcron
-+                ;;
-+        stop)
-+                echo "Stopping fcron..."
-+                killproc fcron
-+                ;;
-+        restart)
-+                $0 stop
-+                sleep 1
-+                $0 start
-+                ;;
-+        status)
-+                statusproc fcron
-+                ;;
-+        *)
-+                echo "Usage: $0 {start|stop|restart|status}"
-+                exit 1
-+                ;;
-+esac
-+# End $rc_base/init.d/fcron
-+<userinput>EOF
-+chmod 755 /etc/rc.d/init.d/fcron &&
-+/etc/rc.d/init.d/fcron start &&
-+mv /etc/rc.d/rc0.d/K60fcron /etc/rc.d/rc0.d/K08fcron &&
-+mv /etc/rc.d/rc6.d/K60fcron /etc/rc.d/rc6.d/K08fcron</userinput></screen></para>
-+</sect3>
-+<sect3><title>Config files</title>
-+<para><userinput>/etc/fcron.conf, /etc/fcron.allow,
-+/etc/fcron.deny</userinput></para>
-+<para>There are no required changes in any of these files.
-+Configuration information can be found in the man page for
-+fcron.conf.</para>
-+<para>fcron scripts are written using fcrontab.  Refer to the man page
-+for fcrontab for proper parameters for your situation.</para></sect3>
-+</sect2>
---- general/sysutils/fcron/fcron-config.xml	(révision 0)
-+++ general/sysutils/fcron/fcron-config.xml	(révision 3)
-@@ -0,0 +1,74 @@
-+<sect2>
-+<title>Configuring fcron</title>
-+
-+<sect3><title>make install script</title>
-+
-+<para>After the files are installed, the make install script enters into a
-+configuration routine.  The first test will be for a group named fcron.  If
-+it does not exist, you will be given the command line that the script proposes
-+to run and a prompt for a 'y' or 'n'.  This is repeated to create a user named
-+fcron and to install a script in the init.d directory with the appropriate
-+symbolic links in runlevels 2, 3, 4, and 5.  The final configuation step is to
-+stop any current fcron processes and start the new fcron.  A yes here will stop
-+current fcron processes but will fail to start new fcron.  The following
-+commands will correct this:</para>
-+
-+<para><screen><userinput>cat > /etc/rc.d/init.d/fcron << "EOF"</userinput>
-+#!/bin/sh
-+# Begin $rc_base/init.d/fcron
-+
-+# Based on sysklogd script from LFS-3.1 and earlier.
-+# Rewritten by Gerard Beekmans  - gerard at linuxfromscratch.org
-+
-+source /etc/sysconfig/rc
-+source $rc_functions
-+
-+case "$1" in
-+        start)
-+                echo "Starting fcron..."
-+                loadproc fcron
-+                ;;
-+
-+        stop)
-+                echo "Stopping fcron..."
-+                killproc fcron
-+                ;;
-+
-+        restart)
-+                $0 stop
-+                sleep 1
-+                $0 start
-+                ;;
-+
-+        status)
-+                statusproc fcron
-+                ;;
-+
-+        *)
-+                echo "Usage: $0 {start|stop|restart|status}"
-+                exit 1
-+                ;;
-+esac
-+
-+# End $rc_base/init.d/fcron
-+<userinput>EOF
-+chmod 755 /etc/rc.d/init.d/fcron &&
-+/etc/rc.d/init.d/fcron start &&
-+mv /etc/rc.d/rc0.d/K60fcron /etc/rc.d/rc0.d/K08fcron &&
-+mv /etc/rc.d/rc6.d/K60fcron /etc/rc.d/rc6.d/K08fcron</userinput></screen></para>
-+</sect3>
-+
-+<sect3><title>Config files</title>
-+
-+<para><userinput>/etc/fcron.conf, /etc/fcron.allow,
-+/etc/fcron.deny</userinput></para>
-+
-+<para>There are no required changes in any of these files.
-+Configuration information can be found in the man page for
-+fcron.conf.</para>
-+
-+<para>fcron scripts are written using fcrontab.  Refer to the man page
-+for fcrontab for proper parameters for your situation.</para></sect3>
-+
-+</sect2>
-+
---- general/sysutils/fcron/fcron-config.xml	(révision 0)
-+++ general/sysutils/fcron/fcron-config.xml	(révision 3)
-@@ -0,0 +1,74 @@
-+<sect2>
-+<title>Configuring fcron</title>
-+
-+<sect3><title>make install script</title>
-+
-+<para>After the files are installed, the make install script enters into a
-+configuration routine.  The first test will be for a group named fcron.  If
-+it does not exist, you will be given the command line that the script proposes
-+to run and a prompt for a 'y' or 'n'.  This is repeated to create a user named
-+fcron and to install a script in the init.d directory with the appropriate
-+symbolic links in runlevels 2, 3, 4, and 5.  The final configuation step is to
-+stop any current fcron processes and start the new fcron.  A yes here will stop
-+current fcron processes but will fail to start new fcron.  The following
-+commands will correct this:</para>
-+
-+<para><screen><userinput>cat > /etc/rc.d/init.d/fcron << "EOF"</userinput>
-+#!/bin/sh
-+# Begin $rc_base/init.d/fcron
-+
-+# Based on sysklogd script from LFS-3.1 and earlier.
-+# Rewritten by Gerard Beekmans  - gerard at linuxfromscratch.org
-+
-+source /etc/sysconfig/rc
-+source $rc_functions
-+
-+case "$1" in
-+        start)
-+                echo "Starting fcron..."
-+                loadproc fcron
-+                ;;
-+
-+        stop)
-+                echo "Stopping fcron..."
-+                killproc fcron
-+                ;;
-+
-+        restart)
-+                $0 stop
-+                sleep 1
-+                $0 start
-+                ;;
-+
-+        status)
-+                statusproc fcron
-+                ;;
-+
-+        *)
-+                echo "Usage: $0 {start|stop|restart|status}"
-+                exit 1
-+                ;;
-+esac
-+
-+# End $rc_base/init.d/fcron
-+<userinput>EOF
-+chmod 755 /etc/rc.d/init.d/fcron &&
-+/etc/rc.d/init.d/fcron start &&
-+mv /etc/rc.d/rc0.d/K60fcron /etc/rc.d/rc0.d/K08fcron &&
-+mv /etc/rc.d/rc6.d/K60fcron /etc/rc.d/rc6.d/K08fcron</userinput></screen></para>
-+</sect3>
-+
-+<sect3><title>Config files</title>
-+
-+<para><userinput>/etc/fcron.conf, /etc/fcron.allow,
-+/etc/fcron.deny</userinput></para>
-+
-+<para>There are no required changes in any of these files.
-+Configuration information can be found in the man page for
-+fcron.conf.</para>
-+
-+<para>fcron scripts are written using fcrontab.  Refer to the man page
-+for fcrontab for proper parameters for your situation.</para></sect3>
-+
-+</sect2>
-+
-
-Index: general/sysutils/fcron/fcron-desc.xml
-===================================================================
---- general/sysutils/fcron/fcron-desc.xml	(révision 0)
-+++ general/sysutils/fcron/fcron-desc.xml	(révision 3)
-@@ -0,0 +1,28 @@
-+<sect2>
-+<title>Contents</title>
-+<para>The fcron package contains <userinput>fcron, fcrontab,
-+fcronsighup</userinput> and <userinput>fcrondyn.</userinput></para>
-+</sect2>
-+<sect2><title>Description</title>
-+<sect3><title>fcron</title>
-+<para>fcron is the scheduling daemon.
-+</para></sect3>
-+<sect3><title>fcrontab</title>
-+<para>fcrontab is the program used to install, edit, list and remove the
-+tables used by fcron.</para></sect3>
-+<sect3><title>fcronsighup</title>
-+<para>fcronsighup instructs fcron to reread the fcron tables.
-+</para></sect3>
-+<sect3><title>fcrondyn</title>
-+<para>fcrondyn is a user tool intended to interact with a running fcron
-+daemon.</para></sect3>
-+</sect2>
---- general/sysutils/fcron/fcron-desc.xml	(révision 0)
-+++ general/sysutils/fcron/fcron-desc.xml	(révision 3)
-@@ -0,0 +1,28 @@
-+<sect2>
-+<title>Contents</title>
-+
-+<para>The fcron package contains <userinput>fcron, fcrontab,
-+fcronsighup</userinput> and <userinput>fcrondyn.</userinput></para>
-+
-+</sect2>
-+
-+<sect2><title>Description</title>
-+
-+<sect3><title>fcron</title>
-+<para>fcron is the scheduling daemon.
-+</para></sect3>
-+
-+<sect3><title>fcrontab</title>
-+<para>fcrontab is the program used to install, edit, list and remove the
-+tables used by fcron.</para></sect3>
-+
-+<sect3><title>fcronsighup</title>
-+<para>fcronsighup instructs fcron to reread the fcron tables.
-+</para></sect3>
-+
-+<sect3><title>fcrondyn</title>
-+<para>fcrondyn is a user tool intended to interact with a running fcron
-+daemon.</para></sect3>
-+
-+</sect2>
-+
---- general/sysutils/fcron/fcron-desc.xml	(révision 0)
-+++ general/sysutils/fcron/fcron-desc.xml	(révision 3)
-@@ -0,0 +1,28 @@
-+<sect2>
-+<title>Contents</title>
-+
-+<para>The fcron package contains <userinput>fcron, fcrontab,
-+fcronsighup</userinput> and <userinput>fcrondyn.</userinput></para>
-+
-+</sect2>
-+
-+<sect2><title>Description</title>
-+
-+<sect3><title>fcron</title>
-+<para>fcron is the scheduling daemon.
-+</para></sect3>
-+
-+<sect3><title>fcrontab</title>
-+<para>fcrontab is the program used to install, edit, list and remove the
-+tables used by fcron.</para></sect3>
-+
-+<sect3><title>fcronsighup</title>
-+<para>fcronsighup instructs fcron to reread the fcron tables.
-+</para></sect3>
-+
-+<sect3><title>fcrondyn</title>
-+<para>fcrondyn is a user tool intended to interact with a running fcron
-+daemon.</para></sect3>
-+
-+</sect2>
-+
-
-Index: general/sysutils/fcron/fcron.ent
-===================================================================
---- general/sysutils/fcron/fcron.ent	(révision 0)
-+++ general/sysutils/fcron/fcron.ent	(révision 3)
-@@ -0,0 +1,10 @@
-+<!ENTITY fcron SYSTEM "../fcron.xml">
-+<!ENTITY fcron-intro SYSTEM "fcron-intro.xml">
-+<!ENTITY fcron-inst SYSTEM "fcron-inst.xml">
-+<!ENTITY fcron-exp SYSTEM "fcron-exp.xml">
-+<!ENTITY fcron-desc SYSTEM "fcron-desc.xml">
-+<!ENTITY fcron-config SYSTEM "fcron-config.xml">
-+<!ENTITY fcron-buildsize "2.3 MB">
-+<!ENTITY fcron-version "2.9.0">
-+<!ENTITY fcron-download "http://fcron.free.fr/fcron-2.9.0.src.tar.gz">
-+<!ENTITY fcron-size "324 KB">
---- general/sysutils/fcron/fcron.ent	(révision 0)
-+++ general/sysutils/fcron/fcron.ent	(révision 3)
-@@ -0,0 +1,10 @@
-+<!ENTITY fcron SYSTEM "../fcron.xml">
-+<!ENTITY fcron-intro SYSTEM "fcron-intro.xml">
-+<!ENTITY fcron-inst SYSTEM "fcron-inst.xml">
-+<!ENTITY fcron-exp SYSTEM "fcron-exp.xml">
-+<!ENTITY fcron-desc SYSTEM "fcron-desc.xml">
-+<!ENTITY fcron-config SYSTEM "fcron-config.xml">
-+<!ENTITY fcron-buildsize "2.3 MB">
-+<!ENTITY fcron-version "2.9.0">
-+<!ENTITY fcron-download "http://fcron.free.fr/fcron-2.9.0.src.tar.gz">
-+<!ENTITY fcron-size "324 KB">
---- general/sysutils/fcron/fcron.ent	(révision 0)
-+++ general/sysutils/fcron/fcron.ent	(révision 3)
-@@ -0,0 +1,10 @@
-+<!ENTITY fcron SYSTEM "../fcron.xml">
-+<!ENTITY fcron-intro SYSTEM "fcron-intro.xml">
-+<!ENTITY fcron-inst SYSTEM "fcron-inst.xml">
-+<!ENTITY fcron-exp SYSTEM "fcron-exp.xml">
-+<!ENTITY fcron-desc SYSTEM "fcron-desc.xml">
-+<!ENTITY fcron-config SYSTEM "fcron-config.xml">
-+<!ENTITY fcron-buildsize "2.3 MB">
-+<!ENTITY fcron-version "2.9.0">
-+<!ENTITY fcron-download "http://fcron.free.fr/fcron-2.9.0.src.tar.gz">
-+<!ENTITY fcron-size "324 KB">
-
-Index: general/sysutils/fcron/fcron-exp.xml
-===================================================================
---- general/sysutils/fcron/fcron-exp.xml	(révision 0)
-+++ general/sysutils/fcron/fcron-exp.xml	(révision 3)
-@@ -0,0 +1,8 @@
-+<sect2>
-+<title>Command explanations</title>
-+<para><userinput>make CC="gcc $CFLAGS":</userinput> This makes fcron
-+compile using our CFLAGS for optimizations.</para>
-+</sect2>
---- general/sysutils/fcron/fcron-exp.xml	(révision 0)
-+++ general/sysutils/fcron/fcron-exp.xml	(révision 3)
-@@ -0,0 +1,8 @@
-+<sect2>
-+<title>Command explanations</title>
-+
-+<para><userinput>make CC="gcc $CFLAGS":</userinput> This makes fcron
-+compile using our CFLAGS for optimizations.</para>
-+
-+</sect2>
-+
---- general/sysutils/fcron/fcron-exp.xml	(révision 0)
-+++ general/sysutils/fcron/fcron-exp.xml	(révision 3)
-@@ -0,0 +1,8 @@
-+<sect2>
-+<title>Command explanations</title>
-+
-+<para><userinput>make CC="gcc $CFLAGS":</userinput> This makes fcron
-+compile using our CFLAGS for optimizations.</para>
-+
-+</sect2>
-+
-
-Index: general/sysutils/fcron/fcron-inst.xml
-===================================================================
---- general/sysutils/fcron/fcron-inst.xml	(révision 0)
-+++ general/sysutils/fcron/fcron-inst.xml	(révision 3)
-@@ -0,0 +1,43 @@
-+<sect2>
-+<title>Installation of fcron</title>
-+<para>Fcron uses the cron facility of syslog to log all messages.  Since LFS 
-+does not set up this facility in /etc/syslog.conf, it needs to be done prior 
-+to installing fcron.  This command will append the necessary line to the 
-+current <filename>/etc/syslog.conf</filename>.</para>
-+<para><screen><userinput>cat >> /etc/syslog.conf << "EOF"</userinput>
-+# Begin fcron addition to /etc/syslog.conf
-+cron.* -/var/log/cron.log
-+# End fcron addition
-+<userinput>EOF</userinput></screen></para>
-+<para>The configuration file has been modified, so reloading the sysklogd 
-+daemon will activate the changes.</para>
-+<para><screen><userinput>/etc/rc.d/init.d/sysklogd reload</userinput></screen></para>
-+<para>Install fcron by running the following commands:</para>
-+<para><screen><userinput>./configure &&
-+make CC="gcc $CFLAGS" &&
-+make install</userinput></screen></para>
-+</sect2>
-+<sect2>
-+<title>Install fcron without MTA </title>
-+<para>Fcron does not require a mail transfer agent (MTA) to run, but will 
-+use one if it is installed to email you the results of the fcron script.  If 
-+you wish to install without a MTA, run the following commands:</para>
-+<para><screen><userinput>./configure --without-sendmail &&
-+make CC="gcc $CFLAGS" &&
-+make install</userinput></screen></para>
-+</sect2>
---- general/sysutils/fcron/fcron-inst.xml	(révision 0)
-+++ general/sysutils/fcron/fcron-inst.xml	(révision 3)
-@@ -0,0 +1,43 @@
-+<sect2>
-+<title>Installation of fcron</title>
-+
-+<para>Fcron uses the cron facility of syslog to log all messages.  Since LFS 
-+does not set up this facility in /etc/syslog.conf, it needs to be done prior 
-+to installing fcron.  This command will append the necessary line to the 
-+current <filename>/etc/syslog.conf</filename>.</para>
-+
-+<para><screen><userinput>cat >> /etc/syslog.conf << "EOF"</userinput>
-+# Begin fcron addition to /etc/syslog.conf
-+
-+cron.* -/var/log/cron.log
-+
-+# End fcron addition
-+<userinput>EOF</userinput></screen></para>
-+
-+<para>The configuration file has been modified, so reloading the sysklogd 
-+daemon will activate the changes.</para>
-+
-+<para><screen><userinput>/etc/rc.d/init.d/sysklogd reload</userinput></screen></para>
-+
-+<para>Install fcron by running the following commands:</para>
-+
-+<para><screen><userinput>./configure &&
-+make CC="gcc $CFLAGS" &&
-+make install</userinput></screen></para>
-+
-+</sect2>
-+
-+<sect2>
-+
-+<title>Install fcron without MTA </title>
-+
-+<para>Fcron does not require a mail transfer agent (MTA) to run, but will 
-+use one if it is installed to email you the results of the fcron script.  If 
-+you wish to install without a MTA, run the following commands:</para>
-+
-+<para><screen><userinput>./configure --without-sendmail &&
-+make CC="gcc $CFLAGS" &&
-+make install</userinput></screen></para>
-+
-+</sect2>
-+
---- general/sysutils/fcron/fcron-inst.xml	(révision 0)
-+++ general/sysutils/fcron/fcron-inst.xml	(révision 3)
-@@ -0,0 +1,43 @@
-+<sect2>
-+<title>Installation of fcron</title>
-+
-+<para>Fcron uses the cron facility of syslog to log all messages.  Since LFS 
-+does not set up this facility in /etc/syslog.conf, it needs to be done prior 
-+to installing fcron.  This command will append the necessary line to the 
-+current <filename>/etc/syslog.conf</filename>.</para>
-+
-+<para><screen><userinput>cat >> /etc/syslog.conf << "EOF"</userinput>
-+# Begin fcron addition to /etc/syslog.conf
-+
-+cron.* -/var/log/cron.log
-+
-+# End fcron addition
-+<userinput>EOF</userinput></screen></para>
-+
-+<para>The configuration file has been modified, so reloading the sysklogd 
-+daemon will activate the changes.</para>
-+
-+<para><screen><userinput>/etc/rc.d/init.d/sysklogd reload</userinput></screen></para>
-+
-+<para>Install fcron by running the following commands:</para>
-+
-+<para><screen><userinput>./configure &&
-+make CC="gcc $CFLAGS" &&
-+make install</userinput></screen></para>
-+
-+</sect2>
-+
-+<sect2>
-+
-+<title>Install fcron without MTA </title>
-+
-+<para>Fcron does not require a mail transfer agent (MTA) to run, but will 
-+use one if it is installed to email you the results of the fcron script.  If 
-+you wish to install without a MTA, run the following commands:</para>
-+
-+<para><screen><userinput>./configure --without-sendmail &&
-+make CC="gcc $CFLAGS" &&
-+make install</userinput></screen></para>
-+
-+</sect2>
-+
-
-Index: general/sysutils/fcron/fcron-intro.xml
-===================================================================
---- general/sysutils/fcron/fcron-intro.xml	(révision 0)
-+++ general/sysutils/fcron/fcron-intro.xml	(révision 3)
-@@ -0,0 +1,18 @@
-<sect2>
-<title>Introduction to fcron</title>
-<screen>Download location:              <ulink url="&fcron-download;"/>
-Version used:                   &fcron-version;
-Package size:                   &fcron-size;
-Estimated Disk space required:  &fcron-buildsize;</screen>
-<para>The fcron package contains the fcron daemon. "It
-is a periodical command scheduler which aims at replacing Vixie
-Cron." </para>
-<screen>fcron requires a running syslog (part of the base LFS system).
-fcron recommends a local mail system (sendmail or <xref
-linkend="postfix"></xref>, for example).
-fcron will utilize PAM if it is installed prior to fcron.</screen>
-</sect2>
---- general/sysutils/fcron/fcron-intro.xml	(révision 0)
-+++ general/sysutils/fcron/fcron-intro.xml	(révision 3)
-@@ -0,0 +1,18 @@
-+<sect2>
-+<title>Introduction to fcron</title>
-+
-+<screen>Download location:              <ulink url="&fcron-download;"/>
-+Version used:                   &fcron-version;
-+Package size:                   &fcron-size;
-+Estimated Disk space required:  &fcron-buildsize;</screen>
-+
-+<para>The fcron package contains the fcron daemon. "It
-+is a periodical command scheduler which aims at replacing Vixie
-+Cron." </para>
-+
-+<screen>fcron requires a running syslog (part of the base LFS system).
-+fcron recommends a local mail system (sendmail or <xref
-+linkend="postfix"></xref>, for example).
-+fcron will utilize PAM if it is installed prior to fcron.</screen>
-+
-+</sect2>
---- general/sysutils/fcron/fcron-intro.xml	(révision 0)
-+++ general/sysutils/fcron/fcron-intro.xml	(révision 3)
-@@ -0,0 +1,18 @@
-+<sect2>
-+<title>Introduction to fcron</title>
-+
-+<screen>Download location:              <ulink url="&fcron-download;"/>
-+Version used:                   &fcron-version;
-+Package size:                   &fcron-size;
-+Estimated Disk space required:  &fcron-buildsize;</screen>
-+
-+<para>The fcron package contains the fcron daemon. "It
-+is a periodical command scheduler which aims at replacing Vixie
-+Cron." </para>
-+
-+<screen>fcron requires a running syslog (part of the base LFS system).
-+fcron recommends a local mail system (sendmail or <xref
-+linkend="postfix"></xref>, for example).
-+fcron will utilize PAM if it is installed prior to fcron.</screen>
-+
-+</sect2>
-
-Index: general/sysutils/fcron.xml
-===================================================================
---- general/sysutils/fcron.xml	(révision 0)
-+++ general/sysutils/fcron.xml	(révision 3)
-@@ -0,0 +1,12 @@
-+<sect1 id="fcron" xreflabel="fcron-&fcron-version;">
-+<?dbhtml filename="fcron.html" dir="general"?>
-+<title>fcron-&fcron-version;</title>
-+
-+&fcron-intro;
-+&fcron-inst;
-+&fcron-exp;
-+&fcron-config;
-+&fcron-desc;
-+
-+</sect1>
-+
---- general/sysutils/fcron.xml	(révision 0)
-+++ general/sysutils/fcron.xml	(révision 3)
-@@ -0,0 +1,12 @@
-+<sect1 id="fcron" xreflabel="fcron-&fcron-version;">
-+<?dbhtml filename="fcron.html" dir="general"?>
-+<title>fcron-&fcron-version;</title>
-+
-+&fcron-intro;
-+&fcron-inst;
-+&fcron-exp;
-+&fcron-config;
-+&fcron-desc;
-+
-+</sect1>
-+
-
-Index: general/sysutils/gpm/gpm-config.xml
-===================================================================
---- general/sysutils/gpm/gpm-config.xml	(révision 0)
-+++ general/sysutils/gpm/gpm-config.xml	(révision 3)
-@@ -0,0 +1,106 @@
-+<sect2>
-+<title>Configuring gpm</title>
-+
-+<sect3><title>gpm init.d script</title>
-+<para>The gpm init.d script can be created using the following
-+commands:  (This assumes that you have followed the LFS default of
-+having your $rc_base set to <filename
-+class="directory">/etc/rc.d</filename>)</para>
-+<para><screen><userinput>cat > /etc/rc.d/init.d/gpm << "EOF"</userinput>
-+#!/bin/sh
-+# Begin $rc_base/init.d/gpm
-+
-+# Based on sysklogd script from LFS-3.1 and earlier.
-+# Rewritten by Gerard Beekmans  - gerard at linuxfromscratch.org
-+# GPM specific parts by Mark Hymers - markh at linuxfromscratch.org
-+
-+source /etc/sysconfig/rc
-+source $rc_functions
-+
-+if [ -f /etc/sysconfig/mouse ]
-+	then
-+        source /etc/sysconfig/mouse
-+fi
-+
-+if [ -z "$MDEVICE" ] || [ -z "$PROTOCOL" ]
-+	then
-+	echo "Please create an /etc/sysconfig/mouse file containing"
-+	echo "MDEVICE and PROTOCOL values"
-+	exit 1;
-+fi
-+
-+case "$1" in
-+        start)
-+                echo "Starting gpm..."
-+                loadproc gpm -m $MDEVICE -t $PROTOCOL
-+                ;;
-+
-+        stop)
-+                echo "Stopping gpm..."
-+                killproc gpm
-+                ;;
-+
-+        restart)
-+                $0 stop
-+                sleep 1
-+                $0 start
-+                ;;
-+
-+        status)
-+                statusproc gpm
-+                ;;
-+
-+        *)
-+                echo "Usage: $0 {start|stop|restart|status}"
-+                exit 1
-+                ;;
-+esac
-+
-+# End $rc_base/init.d/gpm
-+<userinput>EOF
-+chmod 755 /etc/rc.d/init.d/gpm</userinput></screen></para>
-+
-+<para>You then need to create symbolic links to this file in the relevant rc.d
-+directories.  For example:
-+<screen><userinput>cd /etc/rc.d/init.d &&
-+ln -sf ../init.d/gpm ../rc0.d/K10gpm &&
-+ln -sf ../init.d/gpm ../rc1.d/K10gpm &&
-+ln -sf ../init.d/gpm ../rc2.d/K10gpm &&
-+ln -sf ../init.d/gpm ../rc3.d/S70gpm &&
-+ln -sf ../init.d/gpm ../rc4.d/S70gpm &&
-+ln -sf ../init.d/gpm ../rc5.d/S70gpm &&
-+ln -sf ../init.d/gpm ../rc6.d/K10gpm</userinput></screen></para></sect3>
-+
-+<sect3><title>Config files</title>
-+<para><userinput>/etc/sysconfig/mouse</userinput>
-+This file contains the name of your mouse device and the protocol which
-+it uses.  To create this file, run the following:</para>
-+
-+<para><screen><userinput>cat > /etc/sysconfig/mouse << "EOF"</userinput> 
-+# start /etc/sysconfig/mouse
-+MDEVICE=yourdevice
-+PROTOCOL=yourprotocol
-+# end /etc/sysconfig/mouse
-+<userinput>EOF</userinput></screen></para>
-+</sect3>
-+
-+<sect3><title>Configuration Information</title>
-+
-+<para>Examples of values to set MDEVICE and PROTOCOL to are</para>
-+
-+<para><screen>MDEVICE=/dev/psaux
-+PROTOCOL=imps2</screen></para>
-+
-+<para>A list of which protocol values are known can be found by running
-+<userinput>gpm -t -help</userinput>.  Your MDEVICE setting depends on
-+which type of mouse you have.  For example,
-+<userinput>/dev/ttyS0</userinput> for a serial mouse (on Windows this is
-+COM1), <userinput>/dev/input/mice</userinput> is often used for USB mice
-+and <userinput>/dev/psaux</userinput> for PS2 mice.  It is normally
-+thought not a good idea to link /dev/mouse to the relevant device, but
-+instead to reference it directly.</para>
-+
-+</sect3>
-+
-+</sect2>
-+
---- general/sysutils/gpm/gpm-config.xml	(révision 0)
-+++ general/sysutils/gpm/gpm-config.xml	(révision 3)
-@@ -0,0 +1,106 @@
-+<sect2>
-+<title>Configuring gpm</title>
-+
-+<sect3><title>gpm init.d script</title>
-+<para>The gpm init.d script can be created using the following
-+commands:  (This assumes that you have followed the LFS default of
-+having your $rc_base set to <filename
-+class="directory">/etc/rc.d</filename>)</para>
-+<para><screen><userinput>cat > /etc/rc.d/init.d/gpm << "EOF"</userinput>
-+#!/bin/sh
-+# Begin $rc_base/init.d/gpm
-+
-+# Based on sysklogd script from LFS-3.1 and earlier.
-+# Rewritten by Gerard Beekmans  - gerard at linuxfromscratch.org
-+# GPM specific parts by Mark Hymers - markh at linuxfromscratch.org
-+
-+source /etc/sysconfig/rc
-+source $rc_functions
-+
-+if [ -f /etc/sysconfig/mouse ]
-+	then
-+        source /etc/sysconfig/mouse
-+fi
-+
-+if [ -z "$MDEVICE" ] || [ -z "$PROTOCOL" ]
-+	then
-+	echo "Please create an /etc/sysconfig/mouse file containing"
-+	echo "MDEVICE and PROTOCOL values"
-+	exit 1;
-+fi
-+
-+case "$1" in
-+        start)
-+                echo "Starting gpm..."
-+                loadproc gpm -m $MDEVICE -t $PROTOCOL
-+                ;;
-+
-+        stop)
-+                echo "Stopping gpm..."
-+                killproc gpm
-+                ;;
-+
-+        restart)
-+                $0 stop
-+                sleep 1
-+                $0 start
-+                ;;
-+
-+        status)
-+                statusproc gpm
-+                ;;
-+
-+        *)
-+                echo "Usage: $0 {start|stop|restart|status}"
-+                exit 1
-+                ;;
-+esac
-+
-+# End $rc_base/init.d/gpm
-+<userinput>EOF
-+chmod 755 /etc/rc.d/init.d/gpm</userinput></screen></para>
-+
-+<para>You then need to create symbolic links to this file in the relevant rc.d
-+directories.  For example:
-+<screen><userinput>cd /etc/rc.d/init.d &&
-+ln -sf ../init.d/gpm ../rc0.d/K10gpm &&
-+ln -sf ../init.d/gpm ../rc1.d/K10gpm &&
-+ln -sf ../init.d/gpm ../rc2.d/K10gpm &&
-+ln -sf ../init.d/gpm ../rc3.d/S70gpm &&
-+ln -sf ../init.d/gpm ../rc4.d/S70gpm &&
-+ln -sf ../init.d/gpm ../rc5.d/S70gpm &&
-+ln -sf ../init.d/gpm ../rc6.d/K10gpm</userinput></screen></para></sect3>
-+
-+<sect3><title>Config files</title>
-+<para><userinput>/etc/sysconfig/mouse</userinput>
-+This file contains the name of your mouse device and the protocol which
-+it uses.  To create this file, run the following:</para>
-+
-+<para><screen><userinput>cat > /etc/sysconfig/mouse << "EOF"</userinput> 
-+# start /etc/sysconfig/mouse
-+MDEVICE=yourdevice
-+PROTOCOL=yourprotocol
-+# end /etc/sysconfig/mouse
-+<userinput>EOF</userinput></screen></para>
-+</sect3>
-+
-+<sect3><title>Configuration Information</title>
-+
-+<para>Examples of values to set MDEVICE and PROTOCOL to are</para>
-+
-+<para><screen>MDEVICE=/dev/psaux
-+PROTOCOL=imps2</screen></para>
-+
-+<para>A list of which protocol values are known can be found by running
-+<userinput>gpm -t -help</userinput>.  Your MDEVICE setting depends on
-+which type of mouse you have.  For example,
-+<userinput>/dev/ttyS0</userinput> for a serial mouse (on Windows this is
-+COM1), <userinput>/dev/input/mice</userinput> is often used for USB mice
-+and <userinput>/dev/psaux</userinput> for PS2 mice.  It is normally
-+thought not a good idea to link /dev/mouse to the relevant device, but
-+instead to reference it directly.</para>
-+
-+</sect3>
-+
-+</sect2>
-+
-
-Index: general/sysutils/gpm/gpm-desc.xml
-===================================================================
---- general/sysutils/gpm/gpm-desc.xml	(révision 0)
-+++ general/sysutils/gpm/gpm-desc.xml	(révision 3)
-@@ -0,0 +1,26 @@
-+<sect2>
-+<title>Contents</title>
-+
-+<para>The gpm package contains <userinput>gpm, gpm-root, disable-paste
-+and mev</userinput></para>
-+
-+</sect2>
-+
-+<sect2><title>Description</title>
-+
-+<sect3><title>gpm</title>
-+<para>gpm is a cut and paste utility and mouse server for virtual
-+consoles</para></sect3>
-+
-+<sect3><title>gpm-root</title>
-+<para>gpm-root is a default handler for gpm.  It is used to draw menus on the
-+root window</para></sect3>
-+
-+<sect3><title>disable-paste</title>
-+<para>No description available</para></sect3>
-+
-+<sect3><title>mev</title>
-+<para>mev is a program to report mouse events</para></sect3>
-+
-+</sect2>
-+
---- general/sysutils/gpm/gpm-desc.xml	(révision 0)
-+++ general/sysutils/gpm/gpm-desc.xml	(révision 3)
-@@ -0,0 +1,26 @@
-+<sect2>
-+<title>Contents</title>
-+
-+<para>The gpm package contains <userinput>gpm, gpm-root, disable-paste
-+and mev</userinput></para>
-+
-+</sect2>
-+
-+<sect2><title>Description</title>
-+
-+<sect3><title>gpm</title>
-+<para>gpm is a cut and paste utility and mouse server for virtual
-+consoles</para></sect3>
-+
-+<sect3><title>gpm-root</title>
-+<para>gpm-root is a default handler for gpm.  It is used to draw menus on the
-+root window</para></sect3>
-+
-+<sect3><title>disable-paste</title>
-+<para>No description available</para></sect3>
-+
-+<sect3><title>mev</title>
-+<para>mev is a program to report mouse events</para></sect3>
-+
-+</sect2>
-+
-
-Index: general/sysutils/gpm/gpm.ent
-===================================================================
---- general/sysutils/gpm/gpm.ent	(révision 0)
-+++ general/sysutils/gpm/gpm.ent	(révision 3)
-@@ -0,0 +1,9 @@
-+<!ENTITY gpm SYSTEM "../gpm.xml">
-+<!ENTITY gpm-intro SYSTEM "gpm-intro.xml">
-+<!ENTITY gpm-inst SYSTEM "gpm-inst.xml">
-+<!ENTITY gpm-desc SYSTEM "gpm-desc.xml">
-+<!ENTITY gpm-config SYSTEM "gpm-config.xml">
-+<!ENTITY gpm-buildsize "3.2 MB">
-+<!ENTITY gpm-version "1.20.0">
-+<!ENTITY gpm-download "ftp://arcana.linux.it/pub/gpm/gpm-1.20.0.tar.bz2">
-+<!ENTITY gpm-size "382 KB">
---- general/sysutils/gpm/gpm.ent	(révision 0)
-+++ general/sysutils/gpm/gpm.ent	(révision 3)
-@@ -0,0 +1,9 @@
-+<!ENTITY gpm SYSTEM "../gpm.xml">
-+<!ENTITY gpm-intro SYSTEM "gpm-intro.xml">
-+<!ENTITY gpm-inst SYSTEM "gpm-inst.xml">
-+<!ENTITY gpm-desc SYSTEM "gpm-desc.xml">
-+<!ENTITY gpm-config SYSTEM "gpm-config.xml">
-+<!ENTITY gpm-buildsize "3.2 MB">
-+<!ENTITY gpm-version "1.20.0">
-+<!ENTITY gpm-download "ftp://arcana.linux.it/pub/gpm/gpm-1.20.0.tar.bz2">
-+<!ENTITY gpm-size "382 KB">
-
-Index: general/sysutils/gpm/gpm-inst.xml
-===================================================================
---- general/sysutils/gpm/gpm-inst.xml	(révision 0)
-+++ general/sysutils/gpm/gpm-inst.xml	(révision 3)
-@@ -0,0 +1,10 @@
-+<sect2>
-+<title>Installation of gpm</title>
-+
-+<para>Install gpm by running the following commands:</para>
-+
-+<para><screen><userinput>./configure --prefix=/usr &&
-+make &&
-+make install</userinput></screen></para>
-+</sect2>
-+
---- general/sysutils/gpm/gpm-inst.xml	(révision 0)
-+++ general/sysutils/gpm/gpm-inst.xml	(révision 3)
-@@ -0,0 +1,10 @@
-+<sect2>
-+<title>Installation of gpm</title>
-+
-+<para>Install gpm by running the following commands:</para>
-+
-+<para><screen><userinput>./configure --prefix=/usr &&
-+make &&
-+make install</userinput></screen></para>
-+</sect2>
-+
-
-Index: general/sysutils/gpm/gpm-intro.xml
-===================================================================
---- general/sysutils/gpm/gpm-intro.xml	(révision 0)
-+++ general/sysutils/gpm/gpm-intro.xml	(révision 3)
-@@ -0,0 +1,14 @@
-+<sect2>
-+<title>Introduction to gpm</title>
-+
-+<screen>Download location:              &gpm-download;
-+Version used:                   &gpm-version;
-+Package size:                   &gpm-size;
-+Estimated Disk space required:  &gpm-buildsize;</screen>
-+
-+<para>The gpm package contains a mouse server for the console and xterm.
-+This is is useful for cutting and pasting text in console mode, and also
-+because many console-based programs need it to compile mouse support
-+into themselves.</para>
-+
-+</sect2>
---- general/sysutils/gpm/gpm-intro.xml	(révision 0)
-+++ general/sysutils/gpm/gpm-intro.xml	(révision 3)
-@@ -0,0 +1,14 @@
-+<sect2>
-+<title>Introduction to gpm</title>
-+
-+<screen>Download location:              &gpm-download;
-+Version used:                   &gpm-version;
-+Package size:                   &gpm-size;
-+Estimated Disk space required:  &gpm-buildsize;</screen>
-+
-+<para>The gpm package contains a mouse server for the console and xterm.
-+This is is useful for cutting and pasting text in console mode, and also
-+because many console-based programs need it to compile mouse support
-+into themselves.</para>
-+
-+</sect2>
-
-Index: general/sysutils/gpm.xml
-===================================================================
---- general/sysutils/gpm.xml	(révision 0)
-+++ general/sysutils/gpm.xml	(révision 3)
-@@ -0,0 +1,19 @@
-+<sect1 id="gpm" xreflabel="gpm-&gpm-version;">
-+<title>gpm-&gpm-version;</title>
-+
-+<para>Gpm (the general purpose mouse daemon) is a mouse server for
-+applications running in the console.  It not only provides cut and paste
-+support generally, but its library component is used by various software
-+such as links to provide mouse support to the application generally.  It
-+is useful on desktops, especially if following (Beyond)LinuxFromScratch
-+instructions - it's often much easier (and less error prone) to cut and
-+paste between two console windows than to type everything by
-+hand!</para>
-+
-+&gpm-intro;
-+&gpm-inst;
-+&gpm-config;
-+&gpm-desc;
-+
-+</sect1>
-+
---- general/sysutils/gpm.xml	(révision 0)
-+++ general/sysutils/gpm.xml	(révision 3)
-@@ -0,0 +1,19 @@
-+<sect1 id="gpm" xreflabel="gpm-&gpm-version;">
-+<title>gpm-&gpm-version;</title>
-+
-+<para>Gpm (the general purpose mouse daemon) is a mouse server for
-+applications running in the console.  It not only provides cut and paste
-+support generally, but its library component is used by various software
-+such as links to provide mouse support to the application generally.  It
-+is useful on desktops, especially if following (Beyond)LinuxFromScratch
-+instructions - it's often much easier (and less error prone) to cut and
-+paste between two console windows than to type everything by
-+hand!</para>
-+
-+&gpm-intro;
-+&gpm-inst;
-+&gpm-config;
-+&gpm-desc;
-+
-+</sect1>
-+
-
-Index: general/sysutils/hdparm/hdparm-desc.xml
-===================================================================
---- general/sysutils/hdparm/hdparm-desc.xml	(révision 0)
-+++ general/sysutils/hdparm/hdparm-desc.xml	(révision 3)
-@@ -0,0 +1,16 @@
-+<sect2>
-+<title>Contents</title>
-+
-+<para>The hdparm package contains <userinput>hdparm</userinput>.</para>
-+
-+</sect2>
-+
-+<sect2><title>Description</title>
-+
-+<sect3><title>hdparm</title>
-+<para>hdparm provides a command line interface to various hard disk
-+ioctls supported by the stock Linux ATA/IDE device driver 
-+subsystem.</para></sect3>
-+
-+</sect2>
-+
---- general/sysutils/hdparm/hdparm-desc.xml	(révision 0)
-+++ general/sysutils/hdparm/hdparm-desc.xml	(révision 3)
-@@ -0,0 +1,16 @@
-+<sect2>
-+<title>Contents</title>
-+
-+<para>The hdparm package contains <userinput>hdparm</userinput>.</para>
-+
-+</sect2>
-+
-+<sect2><title>Description</title>
-+
-+<sect3><title>hdparm</title>
-+<para>hdparm provides a command line interface to various hard disk
-+ioctls supported by the stock Linux ATA/IDE device driver 
-+subsystem.</para></sect3>
-+
-+</sect2>
-+
-
-Index: general/sysutils/hdparm/hdparm.ent
-===================================================================
---- general/sysutils/hdparm/hdparm.ent	(révision 0)
-+++ general/sysutils/hdparm/hdparm.ent	(révision 3)
-@@ -0,0 +1,8 @@
-+<!ENTITY hdparm SYSTEM "../hdparm.xml">
-+<!ENTITY hdparm-intro SYSTEM "hdparm-intro.xml">
-+<!ENTITY hdparm-inst SYSTEM "hdparm-inst.xml">
-+<!ENTITY hdparm-desc SYSTEM "hdparm-desc.xml">
-+<!ENTITY hdparm-buildsize "257 KB">
-+<!ENTITY hdparm-version "5.2">
-+<!ENTITY hdparm-download "ftp://ftp.ibiblio.org/pub/Linux/system/hardware/hdparm-5.2.tar.gz">
-+<!ENTITY hdparm-size "36 KB">
---- general/sysutils/hdparm/hdparm.ent	(révision 0)
-+++ general/sysutils/hdparm/hdparm.ent	(révision 3)
-@@ -0,0 +1,8 @@
-+<!ENTITY hdparm SYSTEM "../hdparm.xml">
-+<!ENTITY hdparm-intro SYSTEM "hdparm-intro.xml">
-+<!ENTITY hdparm-inst SYSTEM "hdparm-inst.xml">
-+<!ENTITY hdparm-desc SYSTEM "hdparm-desc.xml">
-+<!ENTITY hdparm-buildsize "257 KB">
-+<!ENTITY hdparm-version "5.2">
-+<!ENTITY hdparm-download "ftp://ftp.ibiblio.org/pub/Linux/system/hardware/hdparm-5.2.tar.gz">
-+<!ENTITY hdparm-size "36 KB">
-
-Index: general/sysutils/hdparm/hdparm-inst.xml
-===================================================================
---- general/sysutils/hdparm/hdparm-inst.xml	(révision 0)
-+++ general/sysutils/hdparm/hdparm-inst.xml	(révision 3)
-@@ -0,0 +1,19 @@
-+<sect2>
-+<title>Installation of hdparm</title>
-+
-+<para>Install hdparm by running the following commands:</para>
-+
-+<para><screen><userinput>make && </userinput>
-+<userinput>make install</userinput></screen></para>
-+
-+<para>Note that by default, hdparm is installed in
-+<filename>/sbin</filename> as some systems may require it on bootup
-+before <filename>/usr</filename> is mounted.  If you wish to install
-+hdparm under the <filename>/usr</filename> hierarchy, then replace the
-+above commands with the following:</para>
-+
-+<para><screen><userinput>make && </userinput>
-+<userinput>make binprefix=/usr install</userinput></screen></para>
-+
-+</sect2>
-+
---- general/sysutils/hdparm/hdparm-inst.xml	(révision 0)
-+++ general/sysutils/hdparm/hdparm-inst.xml	(révision 3)
-@@ -0,0 +1,19 @@
-+<sect2>
-+<title>Installation of hdparm</title>
-+
-+<para>Install hdparm by running the following commands:</para>
-+
-+<para><screen><userinput>make && </userinput>
-+<userinput>make install</userinput></screen></para>
-+
-+<para>Note that by default, hdparm is installed in
-+<filename>/sbin</filename> as some systems may require it on bootup
-+before <filename>/usr</filename> is mounted.  If you wish to install
-+hdparm under the <filename>/usr</filename> hierarchy, then replace the
-+above commands with the following:</para>
-+
-+<para><screen><userinput>make && </userinput>
-+<userinput>make binprefix=/usr install</userinput></screen></para>
-+
-+</sect2>
-+
-
-Index: general/sysutils/hdparm/hdparm-intro.xml
-===================================================================
---- general/sysutils/hdparm/hdparm-intro.xml	(révision 0)
-+++ general/sysutils/hdparm/hdparm-intro.xml	(révision 3)
-@@ -0,0 +1,19 @@
-+<sect2>
-+<title>Introduction to hdparm</title>
-+
-+<screen>Download location:              &hdparm-download;
-+Version used:                   &hdparm-version;
-+Package size:                   &hdparm-size;
-+Estimated Disk space required:  &hdparm-buildsize;</screen>
-+
-+<para>The hdparm package contains the hdparm utility.  This is useful
-+for controlling ATA/IDE controllers and hard drives both to increase
-+performance and sometimes to increase stability.</para>
-+
-+<para><emphasis>WARNING!</emphasis> As well as being useful, incorrect
-+usage of hdparm can destroy your information and in rare cases, drives.
-+Use with caution and make sure you know what you are doing.  If in
-+doubt, we recommend you leave the default kernel parameters
-+alone.</para>
-+
-+</sect2>
---- general/sysutils/hdparm/hdparm-intro.xml	(révision 0)
-+++ general/sysutils/hdparm/hdparm-intro.xml	(révision 3)
-@@ -0,0 +1,19 @@
-+<sect2>
-+<title>Introduction to hdparm</title>
-+
-+<screen>Download location:              &hdparm-download;
-+Version used:                   &hdparm-version;
-+Package size:                   &hdparm-size;
-+Estimated Disk space required:  &hdparm-buildsize;</screen>
-+
-+<para>The hdparm package contains the hdparm utility.  This is useful
-+for controlling ATA/IDE controllers and hard drives both to increase
-+performance and sometimes to increase stability.</para>
-+
-+<para><emphasis>WARNING!</emphasis> As well as being useful, incorrect
-+usage of hdparm can destroy your information and in rare cases, drives.
-+Use with caution and make sure you know what you are doing.  If in
-+doubt, we recommend you leave the default kernel parameters
-+alone.</para>
-+
-+</sect2>
-
-Index: general/sysutils/hdparm.xml
-===================================================================
---- general/sysutils/hdparm.xml	(révision 0)
-+++ general/sysutils/hdparm.xml	(révision 3)
-@@ -0,0 +1,10 @@
-+<sect1 id="hdparm" xreflabel="hdparm-&hdparm-version;">
-+<?dbhtml filename="hdparm.html" dir="general"?>
-+<title>hdparm-&hdparm-version;</title>
-+
-+&hdparm-intro;
-+&hdparm-inst;
-+&hdparm-desc;
-+
-+</sect1>
-+
---- general/sysutils/hdparm.xml	(révision 0)
-+++ general/sysutils/hdparm.xml	(révision 3)
-@@ -0,0 +1,10 @@
-+<sect1 id="hdparm" xreflabel="hdparm-&hdparm-version;">
-+<?dbhtml filename="hdparm.html" dir="general"?>
-+<title>hdparm-&hdparm-version;</title>
-+
-+&hdparm-intro;
-+&hdparm-inst;
-+&hdparm-desc;
-+
-+</sect1>
-+
-
-Index: general/sysutils/pccts.xml
-===================================================================
---- general/sysutils/pccts.xml	(révision 0)
-+++ general/sysutils/pccts.xml	(révision 3)
-@@ -0,0 +1,11 @@
-+<sect1 id="pccts" xreflabel="pccts-&pccts-version;">
-+<?dbhtml filename="pccts.html" dir="general"?>
-+<title>pccts-&pccts-version;</title>
-+
-+&pccts-intro;
-+&pccts-inst;
-+&pccts-exp;
-+&pccts-desc;
-+
-+</sect1>
-+
---- general/sysutils/pccts.xml	(révision 0)
-+++ general/sysutils/pccts.xml	(révision 3)
-@@ -0,0 +1,11 @@
-+<sect1 id="pccts" xreflabel="pccts-&pccts-version;">
-+<?dbhtml filename="pccts.html" dir="general"?>
-+<title>pccts-&pccts-version;</title>
-+
-+&pccts-intro;
-+&pccts-inst;
-+&pccts-exp;
-+&pccts-desc;
-+
-+</sect1>
-+
-
-Index: general/sysutils/pciutils/pciutils.ent
-===================================================================
---- general/sysutils/pciutils/pciutils.ent	(révision 0)
-+++ general/sysutils/pciutils/pciutils.ent	(révision 3)
-@@ -0,0 +1 @@
-+<!ENTITY pciutils SYSTEM "../pciutils.xml">
---- general/sysutils/pciutils/pciutils.ent	(révision 0)
-+++ general/sysutils/pciutils/pciutils.ent	(révision 3)
-@@ -0,0 +1 @@
-+<!ENTITY pciutils SYSTEM "../pciutils.xml">
-
-Index: general/sysutils/pciutils.xml
-===================================================================
---- general/sysutils/pciutils.xml	(révision 0)
-+++ general/sysutils/pciutils.xml	(révision 3)
-@@ -0,0 +1,6 @@
-+<sect1 id="pciutils" xreflabel="pciutils">
-+<title>pciutils</title>
-+
-+<para>TO BE DONE</para>
-+
-+</sect1>
---- general/sysutils/pciutils.xml	(révision 0)
-+++ general/sysutils/pciutils.xml	(révision 3)
-@@ -0,0 +1,6 @@
-+<sect1 id="pciutils" xreflabel="pciutils">
-+<title>pciutils</title>
-+
-+<para>TO BE DONE</para>
-+
-+</sect1>
-
-Index: general/sysutils/pkgconfig/pkgconfig-desc.xml
-===================================================================
---- general/sysutils/pkgconfig/pkgconfig-desc.xml	(révision 0)
-+++ general/sysutils/pkgconfig/pkgconfig-desc.xml	(révision 3)
-@@ -0,0 +1,15 @@
-+<sect2>
-+<title>Contents</title>
-+<para>The pkgconfig package contains <userinput>pkg-config</userinput></para>
-+</sect2>
-+<sect2><title>Description</title>
-+<sect3><title>pkg-config</title>
-+<para>pkg-config is a function that returns metainformation for the
-+specified library.</para></sect3>
-+</sect2>
---- general/sysutils/pkgconfig/pkgconfig-desc.xml	(révision 0)
-+++ general/sysutils/pkgconfig/pkgconfig-desc.xml	(révision 3)
-@@ -0,0 +1,15 @@
-+<sect2>
-+<title>Contents</title>
-+
-+<para>The pkgconfig package contains <userinput>pkg-config</userinput></para>
-+
-+</sect2>
-+
-+<sect2><title>Description</title>
-+
-+<sect3><title>pkg-config</title>
-+<para>pkg-config is a function that returns metainformation for the
-+specified library.</para></sect3>
-+
-+</sect2>
-+
---- general/sysutils/pkgconfig/pkgconfig-desc.xml	(révision 0)
-+++ general/sysutils/pkgconfig/pkgconfig-desc.xml	(révision 3)
-@@ -0,0 +1,15 @@
-+<sect2>
-+<title>Contents</title>
-+
-+<para>The pkgconfig package contains <userinput>pkg-config</userinput></para>
-+
-+</sect2>
-+
-+<sect2><title>Description</title>
-+
-+<sect3><title>pkg-config</title>
-+<para>pkg-config is a function that returns metainformation for the
-+specified library.</para></sect3>
-+
-+</sect2>
-+
-
-Index: general/sysutils/pkgconfig/pkgconfig.ent
-===================================================================
---- general/sysutils/pkgconfig/pkgconfig.ent	(révision 0)
-+++ general/sysutils/pkgconfig/pkgconfig.ent	(révision 3)
-@@ -0,0 +1,8 @@
-+<!ENTITY pkgconfig SYSTEM "../pkgconfig.xml">
-+<!ENTITY pkgconfig-intro SYSTEM "pkgconfig-intro.xml">
-+<!ENTITY pkgconfig-inst SYSTEM "pkgconfig-inst.xml">
-+<!ENTITY pkgconfig-desc SYSTEM "pkgconfig-desc.xml">
-+<!ENTITY pkgconfig-buildsize "5 MB">
-+<!ENTITY pkgconfig-version "0.12.0">
-+<!ENTITY pkgconfig-download "http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-0.12.0.tar.gz">
-+<!ENTITY pkgconfig-size "596 KB">
---- general/sysutils/pkgconfig/pkgconfig.ent	(révision 0)
-+++ general/sysutils/pkgconfig/pkgconfig.ent	(révision 3)
-@@ -0,0 +1,8 @@
-+<!ENTITY pkgconfig SYSTEM "../pkgconfig.xml">
-+<!ENTITY pkgconfig-intro SYSTEM "pkgconfig-intro.xml">
-+<!ENTITY pkgconfig-inst SYSTEM "pkgconfig-inst.xml">
-+<!ENTITY pkgconfig-desc SYSTEM "pkgconfig-desc.xml">
-+<!ENTITY pkgconfig-buildsize "5 MB">
-+<!ENTITY pkgconfig-version "0.12.0">
-+<!ENTITY pkgconfig-download "http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-0.12.0.tar.gz">
-+<!ENTITY pkgconfig-size "596 KB">
---- general/sysutils/pkgconfig/pkgconfig.ent	(révision 0)
-+++ general/sysutils/pkgconfig/pkgconfig.ent	(révision 3)
-@@ -0,0 +1,8 @@
-+<!ENTITY pkgconfig SYSTEM "../pkgconfig.xml">
-+<!ENTITY pkgconfig-intro SYSTEM "pkgconfig-intro.xml">
-+<!ENTITY pkgconfig-inst SYSTEM "pkgconfig-inst.xml">
-+<!ENTITY pkgconfig-desc SYSTEM "pkgconfig-desc.xml">
-+<!ENTITY pkgconfig-buildsize "5 MB">
-+<!ENTITY pkgconfig-version "0.12.0">
-+<!ENTITY pkgconfig-download "http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-0.12.0.tar.gz">
-+<!ENTITY pkgconfig-size "596 KB">
-
-Index: general/sysutils/pkgconfig/pkgconfig-inst.xml
-===================================================================
---- general/sysutils/pkgconfig/pkgconfig-inst.xml	(révision 0)
-+++ general/sysutils/pkgconfig/pkgconfig-inst.xml	(révision 3)
-@@ -0,0 +1,11 @@
-+<sect2>
-+<title>Installation of pkgconfig</title>
-+<para>Install pkgconfig by running the following commands:</para>
-+<para><screen><userinput>./configure --prefix=/usr &&
-+make &&
-+make install</userinput></screen></para>
-+</sect2>
---- general/sysutils/pkgconfig/pkgconfig-inst.xml	(révision 0)
-+++ general/sysutils/pkgconfig/pkgconfig-inst.xml	(révision 3)
-@@ -0,0 +1,11 @@
-+<sect2>
-+<title>Installation of pkgconfig</title>
-+
-+<para>Install pkgconfig by running the following commands:</para>
-+
-+<para><screen><userinput>./configure --prefix=/usr &&
-+make &&
-+make install</userinput></screen></para>
-+
-+</sect2>
-+
---- general/sysutils/pkgconfig/pkgconfig-inst.xml	(révision 0)
-+++ general/sysutils/pkgconfig/pkgconfig-inst.xml	(révision 3)
-@@ -0,0 +1,11 @@
-+<sect2>
-+<title>Installation of pkgconfig</title>
-+
-+<para>Install pkgconfig by running the following commands:</para>
-+
-+<para><screen><userinput>./configure --prefix=/usr &&
-+make &&
-+make install</userinput></screen></para>
-+
-+</sect2>
-+
-
-Index: general/sysutils/pkgconfig/pkgconfig-intro.xml
-===================================================================
---- general/sysutils/pkgconfig/pkgconfig-intro.xml	(révision 0)
-+++ general/sysutils/pkgconfig/pkgconfig-intro.xml	(révision 3)
-@@ -0,0 +1,13 @@
-+<sect2>
-+<title>Introduction to pkgconfig</title>
-+<screen>Download location:              <ulink url="&pkgconfig-download;"/>
-+Version used:                   &pkgconfig-version;
-+Package size:                   &pkgconfig-size;
-+Estimated Disk space required:  &pkgconfig-buildsize;</screen>
-+<para>The pkgconfig package contains pkg-config. This is useful for
-+passing the include path and/or library path to the compiler during the
-+make script.</para>
-+</sect2>
---- general/sysutils/pkgconfig/pkgconfig-intro.xml	(révision 0)
-+++ general/sysutils/pkgconfig/pkgconfig-intro.xml	(révision 3)
-@@ -0,0 +1,13 @@
-+<sect2>
-+<title>Introduction to pkgconfig</title>
-+
-+<screen>Download location:              <ulink url="&pkgconfig-download;"/>
-+Version used:                   &pkgconfig-version;
-+Package size:                   &pkgconfig-size;
-+Estimated Disk space required:  &pkgconfig-buildsize;</screen>
-+
-+<para>The pkgconfig package contains pkg-config. This is useful for
-+passing the include path and/or library path to the compiler during the
-+make script.</para>
-+
-+</sect2>
---- general/sysutils/pkgconfig/pkgconfig-intro.xml	(révision 0)
-+++ general/sysutils/pkgconfig/pkgconfig-intro.xml	(révision 3)
-@@ -0,0 +1,13 @@
-+<sect2>
-+<title>Introduction to pkgconfig</title>
-+
-+<screen>Download location:              <ulink url="&pkgconfig-download;"/>
-+Version used:                   &pkgconfig-version;
-+Package size:                   &pkgconfig-size;
-+Estimated Disk space required:  &pkgconfig-buildsize;</screen>
-+
-+<para>The pkgconfig package contains pkg-config. This is useful for
-+passing the include path and/or library path to the compiler during the
-+make script.</para>
-+
-+</sect2>
-
-Index: general/sysutils/pkgconfig.xml
-===================================================================
---- general/sysutils/pkgconfig.xml	(révision 0)
-+++ general/sysutils/pkgconfig.xml	(révision 3)
-@@ -0,0 +1,10 @@
-+<sect1 id="pkgconfig" xreflabel="pkgconfig-&pkgconfig-version;">
-+<?dbhtml filename="pkgconfig.html" dir="general"?>
-+<title>pkgconfig-&pkgconfig-version;</title>
-+
-+&pkgconfig-intro;
-+&pkgconfig-inst;
-+&pkgconfig-desc;
-+
-+</sect1>
-+
---- general/sysutils/pkgconfig.xml	(révision 0)
-+++ general/sysutils/pkgconfig.xml	(révision 3)
-@@ -0,0 +1,10 @@
-+<sect1 id="pkgconfig" xreflabel="pkgconfig-&pkgconfig-version;">
-+<?dbhtml filename="pkgconfig.html" dir="general"?>
-+<title>pkgconfig-&pkgconfig-version;</title>
-+
-+&pkgconfig-intro;
-+&pkgconfig-inst;
-+&pkgconfig-desc;
-+
-+</sect1>
-+
-
-Index: general/sysutils/sysutils.xml
-===================================================================
---- general/sysutils/sysutils.xml	(révision 0)
-+++ general/sysutils/sysutils.xml	(révision 3)
-@@ -0,0 +1,15 @@
-+<chapter id="general-sysutils">
-+<?dbhtml filename="sysutils.html" dir="general"?>
-+<title>System Utilities</title>
-+
-+&gpm;
-+&fcron;
-+&hdparm;
-+&which;
-+&unzip;
-+&zip;
-+&pccts;
-+&pciutils;
-+&pkgconfig;
-+
-+</chapter>
---- general/sysutils/sysutils.xml	(révision 0)
-+++ general/sysutils/sysutils.xml	(révision 3)
-@@ -0,0 +1,15 @@
-+<chapter id="general-sysutils">
-+<?dbhtml filename="sysutils.html" dir="general"?>
-+<title>System Utilities</title>
-+
-+&gpm;
-+&fcron;
-+&hdparm;
-+&which;
-+&unzip;
-+&zip;
-+&pccts;
-+&pciutils;
-+&pkgconfig;
-+
-+</chapter>
-
-Index: general/sysutils/unzip.xml
-===================================================================
---- general/sysutils/unzip.xml	(révision 0)
-+++ general/sysutils/unzip.xml	(révision 3)
-@@ -0,0 +1,9 @@
-+<sect1 id="unzip" xreflabel="unzip-&unzip-version;">
-+<title>unzip-&unzip-version;</title>
-+
-+&unzip-intro;
-+&unzip-inst;
-+&unzip-exp;
-+&unzip-desc;
-+
-+</sect1>
---- general/sysutils/unzip.xml	(révision 0)
-+++ general/sysutils/unzip.xml	(révision 3)
-@@ -0,0 +1,9 @@
-+<sect1 id="unzip" xreflabel="unzip-&unzip-version;">
-+<title>unzip-&unzip-version;</title>
-+
-+&unzip-intro;
-+&unzip-inst;
-+&unzip-exp;
-+&unzip-desc;
-+
-+</sect1>
-
-Index: general/sysutils/whichtemp.xml
-===================================================================
---- general/sysutils/whichtemp.xml	(révision 0)
-+++ general/sysutils/whichtemp.xml	(révision 3)
-@@ -0,0 +1,36 @@
-+<sect1 id="ch05-which">
-+<?dbhtml filename="which.html" dir="chapter05"?>
-+<title>The "which" program / script</title>
-+
-+<para>The presence / absence of the which program in the main LFS book
-+is probably one of the most contentious issues we have on the mailing
-+lists.  It has resulted in at least one flame war in the recent past.
-+To hopefully put an end to this once and for all, we here present the
-+various options for equipping your system with "which".</para>
-+
-+<para>The first option is simply to use a bash alias:</para>
-+<screen>alias which='type -p'</screen>
-+<para>This command can be put in your
-+<filename>~/.bash_profile</filename> or <filename>~/.bashrc</filename>
-+file in order to be set up each time you log in (see man bash for more
-+information on the bash login files).  This will not always work
-+however, for example it will fail when a program needs to use "which" but 
-+doesn't spawn a shell.</para>
-+
-+<para>The second option is to create a simple script:</para>
-+<para><screen><userinput>cat > /usr/bin/which << "EOF"</userinput>
-+#!/bin/bash
-+type -p "$@"
-+<userinput>EOF
-+chmod 755 /usr/bin/which
-+chown root.root /usr/bin/which</userinput></screen></para>
-+<para>This should generally work OK and is probably the easiest solution
-+for boxes which don't need a good user environment to work in.</para>
-+
-+<para>The third option is to install the actual program
-+<emphasis>which</emphasis>.</para>
-+
-+&which;
-+
-+</sect1>
-+
---- general/sysutils/whichtemp.xml	(révision 0)
-+++ general/sysutils/whichtemp.xml	(révision 3)
-@@ -0,0 +1,36 @@
-+<sect1 id="ch05-which">
-+<?dbhtml filename="which.html" dir="chapter05"?>
-+<title>The "which" program / script</title>
-+
-+<para>The presence / absence of the which program in the main LFS book
-+is probably one of the most contentious issues we have on the mailing
-+lists.  It has resulted in at least one flame war in the recent past.
-+To hopefully put an end to this once and for all, we here present the
-+various options for equipping your system with "which".</para>
-+
-+<para>The first option is simply to use a bash alias:</para>
-+<screen>alias which='type -p'</screen>
-+<para>This command can be put in your
-+<filename>~/.bash_profile</filename> or <filename>~/.bashrc</filename>
-+file in order to be set up each time you log in (see man bash for more
-+information on the bash login files).  This will not always work
-+however, for example it will fail when a program needs to use "which" but 
-+doesn't spawn a shell.</para>
-+
-+<para>The second option is to create a simple script:</para>
-+<para><screen><userinput>cat > /usr/bin/which << "EOF"</userinput>
-+#!/bin/bash
-+type -p "$@"
-+<userinput>EOF
-+chmod 755 /usr/bin/which
-+chown root.root /usr/bin/which</userinput></screen></para>
-+<para>This should generally work OK and is probably the easiest solution
-+for boxes which don't need a good user environment to work in.</para>
-+
-+<para>The third option is to install the actual program
-+<emphasis>which</emphasis>.</para>
-+
-+&which;
-+
-+</sect1>
-+
-
-Index: general/sysutils/which/which-desc.xml
-===================================================================
---- general/sysutils/which/which-desc.xml	(révision 0)
-+++ general/sysutils/which/which-desc.xml	(révision 3)
-@@ -0,0 +1,14 @@
-+<sect2>
-+<title>Contents</title>
-+
-+<para>The which package contains <userinput>which</userinput>.</para>
-+
-+</sect2>
-+
-+<sect2><title>Description</title>
-+
-+<sect3><title>which</title>
-+<para>which shows the full path of (shell) commands.</para></sect3>
-+
-+</sect2>
-+
---- general/sysutils/which/which-desc.xml	(révision 0)
-+++ general/sysutils/which/which-desc.xml	(révision 3)
-@@ -0,0 +1,14 @@
-+<sect2>
-+<title>Contents</title>
-+
-+<para>The which package contains <userinput>which</userinput>.</para>
-+
-+</sect2>
-+
-+<sect2><title>Description</title>
-+
-+<sect3><title>which</title>
-+<para>which shows the full path of (shell) commands.</para></sect3>
-+
-+</sect2>
-+
-
-Index: general/sysutils/which/which.ent
-===================================================================
---- general/sysutils/which/which.ent	(révision 0)
-+++ general/sysutils/which/which.ent	(révision 3)
-@@ -0,0 +1,8 @@
-+<!ENTITY which SYSTEM "../which.xml">
-+<!ENTITY which-intro SYSTEM "which-intro.xml">
-+<!ENTITY which-inst SYSTEM "which-inst.xml">
-+<!ENTITY which-desc SYSTEM "which-desc.xml">
-+<!ENTITY which-buildsize "667 KB">
-+<!ENTITY which-version "2.13">
-+<!ENTITY which-download "ftp://ftp.gnu.org/pub/gnu/which/which-2.13.tar.gz">
-+<!ENTITY which-size "104 KB">
---- general/sysutils/which/which.ent	(révision 0)
-+++ general/sysutils/which/which.ent	(révision 3)
-@@ -0,0 +1,8 @@
-+<!ENTITY which SYSTEM "../which.xml">
-+<!ENTITY which-intro SYSTEM "which-intro.xml">
-+<!ENTITY which-inst SYSTEM "which-inst.xml">
-+<!ENTITY which-desc SYSTEM "which-desc.xml">
-+<!ENTITY which-buildsize "667 KB">
-+<!ENTITY which-version "2.13">
-+<!ENTITY which-download "ftp://ftp.gnu.org/pub/gnu/which/which-2.13.tar.gz">
-+<!ENTITY which-size "104 KB">
-
-Index: general/sysutils/which/which-inst.xml
-===================================================================
---- general/sysutils/which/which-inst.xml	(révision 0)
-+++ general/sysutils/which/which-inst.xml	(révision 3)
-@@ -0,0 +1,11 @@
-+<sect2>
-+<title>Installation of which</title>
-+
-+<para>Install which by running the following commands:</para>
-+
-+<para><screen><userinput>./configure --prefix=/usr &&
-+make &&
-+make install</userinput></screen></para>
-+
-+</sect2>
-+
---- general/sysutils/which/which-inst.xml	(révision 0)
-+++ general/sysutils/which/which-inst.xml	(révision 3)
-@@ -0,0 +1,11 @@
-+<sect2>
-+<title>Installation of which</title>
-+
-+<para>Install which by running the following commands:</para>
-+
-+<para><screen><userinput>./configure --prefix=/usr &&
-+make &&
-+make install</userinput></screen></para>
-+
-+</sect2>
-+
-
-Index: general/sysutils/which/which-intro.xml
-===================================================================
---- general/sysutils/which/which-intro.xml	(révision 0)
-+++ general/sysutils/which/which-intro.xml	(révision 3)
-@@ -0,0 +1,9 @@
-+<sect2>
-+<title>Introduction to which</title>
-+
-+<screen>Download location:              &which-download;
-+Version used:                   &which-version;
-+Package size:                   &which-size;
-+Estimated Disk space required:  &which-buildsize;</screen>
-+
-+</sect2>
---- general/sysutils/which/which-intro.xml	(révision 0)
-+++ general/sysutils/which/which-intro.xml	(révision 3)
-@@ -0,0 +1,9 @@
-+<sect2>
-+<title>Introduction to which</title>
-+
-+<screen>Download location:              &which-download;
-+Version used:                   &which-version;
-+Package size:                   &which-size;
-+Estimated Disk space required:  &which-buildsize;</screen>
-+
-+</sect2>
-
-Index: general/sysutils/which.xml
-===================================================================
---- general/sysutils/which.xml	(révision 0)
-+++ general/sysutils/which.xml	(révision 3)
-@@ -0,0 +1,40 @@
-+<sect1 id="which" xreflabel="which-&which-version;">
-+<?dbhtml filename="which.html" dir="general"?>
-+<title>The "which" program / script</title>
-+
-+<para>The presence / absence of the which program in the main LFS book
-+is probably one of the most contentious issues we have on the mailing
-+lists.  It has resulted in at least one flame war in the recent past.
-+To hopefully put an end to this once and for all, we here present the
-+various options for equipping your system with "which".</para>
-+
-+<para>The first option is simply to use a bash alias:</para>
-+<screen>alias which='type -p'</screen>
-+<para>This command can be put in your
-+<filename>~/.bash_profile</filename> or <filename>~/.bashrc</filename>
-+file in order to be set up each time you log in (see man bash for more
-+information on the bash login files).  This will not always work
-+however, for example it will fail when a program needs to use "which"
-+but
-+doesn't spawn a shell.</para>
-+
-+<para>The second option is to create a simple script:</para>
-+<para><screen><userinput>cat > /usr/bin/which <<
-+"EOF"</userinput>
-+#!/bin/bash
-+type -p "$@"
-+<userinput>EOF
-+chmod 755 /usr/bin/which
-+chown root.root /usr/bin/which</userinput></screen></para>
-+<para>This should generally work OK and is probably the easiest solution
-+for boxes which don't need a good user environment to work in.</para>
-+
-+<para>The third option is to install the actual program
-+<emphasis>which</emphasis>.</para>
-+
-+&which-intro;
-+&which-inst;
-+&which-desc;
-+
-+</sect1>
-+
---- general/sysutils/which.xml	(révision 0)
-+++ general/sysutils/which.xml	(révision 3)
-@@ -0,0 +1,40 @@
-+<sect1 id="which" xreflabel="which-&which-version;">
-+<?dbhtml filename="which.html" dir="general"?>
-+<title>The "which" program / script</title>
-+
-+<para>The presence / absence of the which program in the main LFS book
-+is probably one of the most contentious issues we have on the mailing
-+lists.  It has resulted in at least one flame war in the recent past.
-+To hopefully put an end to this once and for all, we here present the
-+various options for equipping your system with "which".</para>
-+
-+<para>The first option is simply to use a bash alias:</para>
-+<screen>alias which='type -p'</screen>
-+<para>This command can be put in your
-+<filename>~/.bash_profile</filename> or <filename>~/.bashrc</filename>
-+file in order to be set up each time you log in (see man bash for more
-+information on the bash login files).  This will not always work
-+however, for example it will fail when a program needs to use "which"
-+but
-+doesn't spawn a shell.</para>
-+
-+<para>The second option is to create a simple script:</para>
-+<para><screen><userinput>cat > /usr/bin/which <<
-+"EOF"</userinput>
-+#!/bin/bash
-+type -p "$@"
-+<userinput>EOF
-+chmod 755 /usr/bin/which
-+chown root.root /usr/bin/which</userinput></screen></para>
-+<para>This should generally work OK and is probably the easiest solution
-+for boxes which don't need a good user environment to work in.</para>
-+
-+<para>The third option is to install the actual program
-+<emphasis>which</emphasis>.</para>
-+
-+&which-intro;
-+&which-inst;
-+&which-desc;
-+
-+</sect1>
-+
-
-Index: general/sysutils/zip.xml
-===================================================================
---- general/sysutils/zip.xml	(révision 0)
-+++ general/sysutils/zip.xml	(révision 3)
-@@ -0,0 +1,7 @@
-+<sect1 id="zip" xreflabel="zip">
-+<?dbhtml filename="zip.html" dir="general"?>
-+<title>zip</title>
-+
-+<para>TO BE DONE</para>
-+
-+</sect1>
---- general/sysutils/zip.xml	(révision 0)
-+++ general/sysutils/zip.xml	(révision 3)
-@@ -0,0 +1,7 @@
-+<sect1 id="zip" xreflabel="zip">
-+<?dbhtml filename="zip.html" dir="general"?>
-+<title>zip</title>
-+
-+<para>TO BE DONE</para>
-+
-+</sect1>
-
-Index: introduction/important/beyond.xml
-===================================================================
---- introduction/important/beyond.xml	(révision 0)
-+++ introduction/important/beyond.xml	(révision 3)
-@@ -0,0 +1,7 @@
-+<sect1 id="intro-important-beyond">
-+<?dbhtml filename="beyond.html" dir="introduction"?>
-+<title>Going Beyond BLFS</title>
-+
-+<para>NEW PAGE TO BE WRITTEN</para>
-+
-+</sect1>
-
-Index: introduction/important/bootscripts.xml
-===================================================================
---- introduction/important/bootscripts.xml	(révision 0)
-+++ introduction/important/bootscripts.xml	(révision 3)
-@@ -0,0 +1,14 @@
-+<sect1 id="intro-important-bootscripts">
-+<?dbhtml filename="bootscripts.html" dir="introduction"?>
-+<title>Using BLFS bootscripts</title>
-+
-+<para>The scripts included for packages such as <xref linkend="gpm"/>
-+and <xref linkend="alsa"/> are based around the template supplied with
-+the lfs-bootscripts package from version 3.2 and later of the LFS book.
-+Note that this is lfs-bootscripts-1.6 and later (the old numbering
-+changed as of LFS-3.2).  The scripts won't work with versions of LFS
-+before 3.2 because of a change in their organisation with the new
-+scripts.  However, it should be trivial to adapt the scripts if needed
-+for older LFS versions.</para>
-+
-+</sect1>
---- introduction/important/bootscripts.xml	(révision 0)
-+++ introduction/important/bootscripts.xml	(révision 3)
-@@ -0,0 +1,14 @@
-+<sect1 id="intro-important-bootscripts">
-+<?dbhtml filename="bootscripts.html" dir="introduction"?>
-+<title>Using BLFS bootscripts</title>
-+
-+<para>The scripts included for packages such as <xref linkend="gpm"/>
-+and <xref linkend="alsa"/> are based around the template supplied with
-+the lfs-bootscripts package from version 3.2 and later of the LFS book.
-+Note that this is lfs-bootscripts-1.6 and later (the old numbering
-+changed as of LFS-3.2).  The scripts won't work with versions of LFS
-+before 3.2 because of a change in their organisation with the new
-+scripts.  However, it should be trivial to adapt the scripts if needed
-+for older LFS versions.</para>
-+
-+</sect1>
-
-Index: introduction/important/important.xml
-===================================================================
---- introduction/important/important.xml	(révision 0)
-+++ introduction/important/important.xml	(révision 3)
-@@ -0,0 +1,10 @@
-+<chapter id="intro-important" xreflabel="Important Information">
-+<?dbhtml filename="important.html" dir="introduction"?>
-+<title>Important Information</title>
-+
-+&intro-important-unpacking;
-+&intro-important-position;
-+&intro-important-bootscripts;
-+&intro-important-beyond;
-+
-+</chapter>
-
-Index: introduction/important/position.xml
-===================================================================
---- introduction/important/position.xml	(révision 0)
-+++ introduction/important/position.xml	(révision 3)
-@@ -0,0 +1,82 @@
-+<sect1 id="intro-important-position">
-+<?dbhtml filename="position.html" dir="introduction"?>
-+<title>The /usr versus /usr/local debate</title>
-+
-+<para><emphasis>Should I install XXX in /usr or
-+/usr/local?</emphasis></para>
-+
-+<para>This is a question without an obvious answer for an LFS based
-+system.</para>
-+
-+<para>In traditional unix systems, <filename>/usr</filename> usually 
-+contains files that come
-+with the system distribution, and the <filename>/usr/local</filename> tree 
-+is free for the local administrator to add things to.  The only 
-+really hard and fast
-+rule is that unix distributions should not touch
-+<filename>/usr/local</filename>, except
-+perhaps for creating the basic directories within it.</para>
-+
-+<para>With Linux distributions, like RedHat, Debian etc. a possible rule is
-+that <filename>/usr</filename> is managed by the distribution's 
-+package system and <filename>/usr/local</filename> is not.  This way the 
-+package manager's database knows about every file within
-+<filename>/usr</filename>.</para>
-+
-+<para>LFS users build their own system and so deciding where the system ends
-+and local files begin is not straightforward.  So the choice should be
-+made in order to make things easier to administer.  There are several
-+reasons for dividing files between <filename>/usr</filename> and
-+<filename>/usr/local</filename>.</para>
-+
-+<itemizedlist>
-+
-+<listitem><para>On a network of several machines all running LFS, or mixed 
-+LFS and
-+other Linux distributions, <filename>/usr/local</filename> could be used to 
-+hold packages
-+that are common between all the computers in the network.  It can be
-+NFS mounted or mirrored from a single server.  Here local indicates
-+local to the site.</para></listitem>
-+
-+<listitem><para>On a network of several computers all running an identical 
-+LFS system <filename>/usr/local</filename> could hold packages that 
-+are different between the machines.  In this case local refers to 
-+the individual computers.</para></listitem>
-+
-+<listitem><para>Even on a single computer <filename>/usr/local</filename> can 
-+be useful if you have several distributions installed simultaneously, and want 
-+a place to put packages that will be the same on all of
-+them.</para></listitem>
-+
-+<listitem><para>Or you might regularly rebuild your LFS, but want 
-+a place to put files
-+that you don't want to rebuild each time.  This way you can wipe the
-+LFS filesystem and start from a clean partition everytime without losing
-+everything.</para></listitem>
-+
-+</itemizedlist>
-+
-+<para>Some people ask why not use your own directory tree, eg
-+<filename>/usr/site</filename> rather than
-+<filename>/usr/local</filename>?</para>
-+
-+<para>There is nothing stopping you, many sites do make their own trees, however
-+it makes installing new software more difficult.  Automatic installers
-+often look for dependencies in <filename>/usr</filename> and
-+<filename>/usr/local</filename>, and if the file it is looking
-+for is in <filename>/usr/site</filename> instead, the installer will 
-+probably fail unless
-+you specifically tell it where to look.</para>
-+
-+<para><emphasis>What is the BLFS position on this?</emphasis></para>
-+
-+<para>All of the BLFS instructions install programs in
-+<filename>/usr</filename> unless specifically stated otherwise.  There
-+are examples where some files are placed in the
-+<filename>/usr/local</filename> hierarchy but these are documented and
-+are generally for a good reason. These exceptions should be well documented 
-+in the book.  If you think you have
-+found one which isn't please tell us!</para>
-+
-+</sect1>
-
-Index: introduction/important/unpacking.xml
-===================================================================
---- introduction/important/unpacking.xml	(révision 0)
-+++ introduction/important/unpacking.xml	(révision 3)
-@@ -0,0 +1,59 @@
-+<sect1 id="intro-important-unpacking">
-+<?dbhtml filename="unpacking.html" dir="introduction"?>
-+<title>Getting and unpacking the software</title>
-+
-+<para>Those people who have built a LFS system will be aware of the
-+general principles of downloading and unpacking software.  We will
-+however repeat some of that information here for those new to building
-+their own software.</para>
-+
-+<para>One difference from the LFS book is that we do <emphasis>not</emphasis> 
-+mirror the packages on the BLFS website.
-+Instead, each set of installation instructions contains a URL from which
-+you can download the package.  We do however keep a selection of patches
-+available via http/ftp.  These are referenced as needed in the
-+installation instructions.</para>
-+
-+<para>Whilst you can keep the source tarballs anywhere you like, we
-+assume that you have unpacked them and unzipped any required patches
-+into <filename>/usr/src</filename>.</para>
-+
-+<para>We can not emphasise strongly enough that you should start from a
-+<emphasis>clean source tree</emphasis> each time.  This means that if
-+you have had an error, it's usually best to delete the source tree and
-+re-unpack it <emphasis>before</emphasis> trying again.  This obviously
-+doesn't apply if you're an advanced user used to hacking Makefiles and C
-+code, but if in doubt, start from a clean tree.</para>
-+
-+<sect2>
-+<title>Unpacking the software</title>
-+
-+<para>If a file is tar'ed and gzip'ed, it is unpacked by running one of
-+the following two commands, depending on the filename:</para>
-+
-+<screen><userinput>tar xvzf filename.tar.gz
-+tar xvzf filename.tgz
-+tar xvzf filename.tar.Z</userinput></screen>
-+
-+<para>If a file is tar'ed and bzip2'ed, it can usually be unpacked by
-+running:</para>
-+
-+<screen><userinput>tar jxvf filename.tar.bz2</userinput></screen>
-+
-+<para>This applies as long as you patched tar to include the j option
-+during your LFS install.  If you didn't, you can use a slightly
-+different method:</para>
-+
-+<screen><userinput>bzcat filename.tar.bz2 | tar xv</userinput></screen>
-+
-+<para>Finally, you need to be able to unpack patches which are generally
-+not tar'd.  The best way to do this is to copy the patch file to
-+<filename>/usr/src</filename> and then to run one of the following
-+commands depending on whether the file is .gz or .bz2:</para>
-+
-+<screen><userinput>gunzip patchname.gz
-+bunzip2 patchname.bz2</userinput></screen>
-+
-+</sect2>
-+
-+</sect1>
-
-Index: introduction/introduction.ent
-===================================================================
---- introduction/introduction.ent	(révision 0)
-+++ introduction/introduction.ent	(révision 3)
-@@ -0,0 +1,19 @@
-+<!ENTITY introduction SYSTEM "introduction.xml">
-+
-+<!ENTITY intro-welcome SYSTEM "welcome/welcome.xml">
-+<!ENTITY intro-welcome-conventions SYSTEM "welcome/conventions.xml">
-+<!ENTITY intro-welcome-version SYSTEM "welcome/version.xml">
-+<!ENTITY intro-welcome-acks SYSTEM "welcome/acknowledgments.xml">
-+<!ENTITY intro-welcome-credits SYSTEM "welcome/credits.xml">
-+<!ENTITY intro-welcome-changelog SYSTEM "welcome/changelog.xml">
-+<!ENTITY intro-welcome-whichsect SYSTEM "welcome/which.xml">
-+<!ENTITY intro-welcome-mailinglists SYSTEM "welcome/maillists.xml">
-+<!ENTITY intro-welcome-newsserver SYSTEM "welcome/newsserver.xml">
-+<!ENTITY intro-welcome-contact SYSTEM "welcome/contact.xml">
-+<!ENTITY intro-welcome-askhelp SYSTEM "welcome/askhelp.xml">
-+
-+<!ENTITY intro-important SYSTEM "important/important.xml">
-+<!ENTITY intro-important-unpacking SYSTEM "important/unpacking.xml">
-+<!ENTITY intro-important-position SYSTEM "important/position.xml">
-+<!ENTITY intro-important-bootscripts SYSTEM "important/bootscripts.xml">
-+<!ENTITY intro-important-beyond SYSTEM "important/beyond.xml">
-
-Index: introduction/introduction.xml
-===================================================================
---- introduction/introduction.xml	(révision 0)
-+++ introduction/introduction.xml	(révision 3)
-@@ -0,0 +1,8 @@
-+<part id="introduction" xreflabel="Introduction">
-+<?dbhtml filename="introduction.html" dir="introduction"?>
-+<title>Introduction</title>
-+
-+&intro-welcome;
-+&intro-important;
-+
-+</part>
-
-Index: introduction/welcome/acknowledgments.xml
-===================================================================
---- introduction/welcome/acknowledgments.xml	(révision 0)
-+++ introduction/welcome/acknowledgments.xml	(révision 3)
-@@ -0,0 +1,50 @@
-+<sect1 id="intro-welcome-acknowledgments">
-+<?dbhtml filename="acknowledgments.html" dir="introduction"?>
-+<title>Acknowledgments</title>
-+
-+<para>We would like to thank the following people and organizations for their
-+contributions toward the BLFS and LFS projects:</para>
-+
-+<itemizedlist>
-+
-+<listitem><para><ulink url="mailto:strider at linux.com">Mark Stone</ulink> 
-+<mstone at linux.com> for donating the linuxfromscratch.org 
-+servers.</para></listitem>
-+ 
-+<listitem><para><ulink url="http://www.valinux.com">VA Linux
-+Systems</ulink> for providing rackspace and bandwidth for the 
-+linuxfromscratch.org server.</para></listitem>
-+
-+<listitem><para><ulink url="mailto:gerard at linuxfromscratch.org">Gerard
-+Beekmans</ulink> <gerard at linuxfromscratch.org> for starting and
-+writing the vast majority of the LFS project.</para></listitem>
-+
-+<listitem><para><ulink url="mailto:highos at linuxfromscratch.org">Jesse
-+Tie-Ten-Quee</ulink> <highos at linuxfromscratch.org> for answering
-+many questions on irc, having a great deal of patience and for not
-+killing the current editor for the joke in the original BLFS
-+announcement!</para></listitem>
-+
-+<listitem><para><ulink url="http://www.dreamwvr.com/services">DREAMWVR.COM</ulink> for their ongoing sponsorship by donating various resources to the LFS and
-+related sub projects.</para></listitem>
-+
-+<listitem><para>Robert Briggs for donating the linuxfromscratch.org and
-+linuxfromscratch.com domain names.</para></listitem>
-+
-+<listitem><para><ulink url="mailto:bkenoah at oswd.org">Frank
-+Skettino</ulink> <bkenoah at oswd.org> at <ulink 
-+url="http://www.oswd.org">OSWD</ulink> for coming up the initial design 
-+of the LFS and BLFS websites.</para></listitem>
-+
-+<listitem><para><ulink url="mailto:garrett at linux.com">Garrett
-+LeSage</ulink> <garrett at linux.com> for creating the LFS 
-+banner</para></listitem>
-+
-+<listitem><para>Countless other people on the various LFS and BLFS 
-+mailinglists who are making this book happen by giving their
-+suggestions, testing the book and submitting bug reports.</para></listitem>
-+
-+</itemizedlist>
-+
-+</sect1>
-+
-
-Index: introduction/welcome/askhelp.xml
-===================================================================
---- introduction/welcome/askhelp.xml	(révision 0)
-+++ introduction/welcome/askhelp.xml	(révision 3)
-@@ -0,0 +1,8 @@
-+<sect1 id="intro-welcome-askhelp">
-+<?dbhtml filename="askhelp.html" dir="introduction"?>
-+<title>Asking for help and the FAQ</title>
-+
-+<para>THIS IS A NEW PAGE</para>
-+
-+</sect1>
-+
-
-Index: introduction/welcome/changelog.xml
-===================================================================
---- introduction/welcome/changelog.xml	(révision 0)
-+++ introduction/welcome/changelog.xml	(révision 3)
-@@ -0,0 +1,423 @@
-+<sect1 id="intro-welcome-changelog">
-+<?dbhtml filename="changelog.html" dir="introduction"?>
-+<title>Changelog</title>
-+
-+<para>Please note that the changelog only lists which editor was
-+responsible for putting the changes into CVS; please read the Credits
-+page in Chapter 1 for details on who wrote what.</para>
-+
-+<para>&version; - &releasedate;</para>
-+
-+<itemizedlist>
-+
-+<listitem><para>July 4, 2002 [bdubbs]: Various typo and 
-+grammer changes.</para></listitem>
-+
-+<listitem><para>July 4, 2002 [bdubbs]: KDE section - updated 
-+koffice patch instruction and added a backslash to kdelibs
-+build commands. Successfully rebuilt kde 3.0.2 with current
-+instructions.</para></listitem>
-+
-+<listitem><para>July 3, 2002 [bdubbs]: KDE section - updated 
-+koffice and changed to kde 3.0.2.</para></listitem>
-+
-+<listitem><para>July 2, 2002 [bdubbs]: KDE section - updated 
-+kdeutils, kdeedu, kdeartwork, kdetoys, and kdeaddons.</para></listitem>
-+
-+<listitem><para>July 2, 2002 [bdubbs]: Updated 
-+link location in libungif and added a note to remove a possible
-+compilation error.</para></listitem>
-+
-+<listitem><para>July 1, 2002 [bdubbs]: KDE section - updated 
-+kdegraphics, kdeadmin, and kdegames sections.  Updated imlib
-+to correct an error in configure with gcc 3.1.  Changed download
-+locations to links in libtiff and libungif</para></listitem>
-+
-+<listitem><para>June 30, 2002 [bdubbs]: KDE section - updated 
-+kedmultimedia, kdenetwork and kdepim sections.</para></listitem>
-+
-+<listitem><para>June 29, 2002 [larry]: Chapter 5 - updated to
-+alsa-0.9.0rc2 and moved gnome intro.</para></listitem>
-+
-+<listitem><para>June 28, 2002 [bdubbs]: QT section -  Added note to allow
-+not building examples and tutorials.</para></listitem>
-+
-+<listitem><para>June 28, 2002 [larry]: Chapter 4 - Added GTK+-1.2.10,
-+GLib-1.2.10, gdk-0.11.0, libxml-1.8.17.</para></listitem>
-+
-+<listitem><para>June 27, 2002 [larry]: Chapter 12 - Started adding
-+GNOME-1.4.1.</para></listitem>
-+
-+<listitem><para>June 26, 2002 [larry]: Chapter 4 - Added
-+GTK+-2.0.5, Chapter 9 - Updated to OpenSSH-3.4p1.</para></listitem>
-+
-+<listitem><para>June 24, 2002 [larry]: Chapter 9 - Updated to
-+OpenSSH-3.3p1, with modifications to set up priviledged/unpriviledged
-+operations which is now the default. Chapter 4 - Added GLib-2.0.4,
-+Pango-1.0.3 and ATK-1.0.2</para></listitem>
-+
-+<listitem><para>June 22, 2002 [larry]: Chapter 20 - Added kernel
-+configuration and additional reading links to
-+introduction.</para></listitem>
-+
-+<listitem><para>June 21, 2002 [larry]: Chapter 04 - Added
-+pkgconfig-0.12.0.</para></listitem>
-+
-+<listitem><para>June 15th, 2002 [larry]: Chapter 08 - Modified config
-+sed command for a change in main.cf after version 1.1.9 on
-+myhostname.</para></listitem>
-+
-+<listitem><para>June 14th, 2002 [larry]: Chapter 07 - Update to curl-7.9.8.
-+</para></listitem>
-+
-+<listitem><para>June 7th, 2002 [markh]: Chapter 02 - Update daemontools
-+and daemontools-man packages; patch from Sal Gonzalez.</para></listitem>
-+
-+<listitem><para>June 7th, 2002 [markh]: Chapter 05 - Update db link
-+location.</para></listitem>
-+
-+<listitem><para>June 7th, 2002 [markh]: Chapter 13 - Update objprelink
-+download location and slightly modify build command to match new
-+file.</para></listitem>
-+
-+<listitem><para>June 7th, 2002 [markh]: Chapter 07 - Update to
-+links-0.97.</para></listitem>
-+
-+<listitem><para>June 7th, 2002 [markh]: Chapter 05 - Update to
-+hdparm-5.2.</para></listitem>
-+
-+<listitem><para>June 7th, 2002 [markh]: Chapter 04 - Finally applied the
-+fix for libmng to make it use lcms properly.</para></listitem>
-+
-+<listitem><para>May 31st, 2002 [larry]: Update to
-+postfix-1.1.11, modified fcron script.</para></listitem>
-+
-+<listitem><para>May 31st, 2002 [markh]: Chapter 06 - Update to
-+wvstreams-3.70 and wvdial-1.53.</para></listitem>
-+
-+<listitem><para>May 31st, 2002 [bdubbs]: Add comment about 
-+<filename>/lib/libmisc.la</filename> to kdebase instructions.</para></listitem>
-+
-+<listitem><para>May 30th, 2002 [larry]: Update to libxml2-1.4.22 and
-+libxslt-1.0.18.</para></listitem>
-+
-+<listitem><para>May 29th, 2002 [markh]: Chapter 04 - Update openssl
-+instructions to install man pages in /usr/share/man.  We get around the
-+passwd man page problem by renaming the source file to openssl-passwd.
-+Thanks to Jesse for suggesting this.</para></listitem>
-+
-+<listitem><para>May 28th, 2002 [bdubbs]: Change structure of kde xml
-+and begin KDE Intro.</para></listitem>
-+
-+<listitem><para>May 28th, 2002 [bdubbs]: Remove extra line feed
-+in qt configure instructions for man.conf.</para></listitem>
-+
-+<listitem><para>May 24th, 2002 [bdubbs]: Updated to openssl
-+to version 0.9.6d and updated configure instruction.</para></listitem>
-+
-+<listitem><para>May 23rd, 2002 [larry]: Updated to libpng
-+1.2.3 and OpenSSH 3.2.3p1.</para></listitem>
-+
-+<listitem><para>May20th, 2002 [larry]: Added pccts 133MR33 to chapter
-+04 and cdrdao 1.1.5 to chapter 20.</para></listitem>
-+
-+<listitem><para>May19th, 2002 [larry]: Updated to OpenSSH 
-+3.2.2p1.</para></listitem>
-+
-+<listitem><para>May 19th, 2002 [bdubbs]: Updated cvs version to 
-+1.11.2.</para></listitem>
-+
-+<listitem><para>May 18th, 2002 [larry]: Updated to postfix
-+1.1.9.</para></listitem>
-+
-+<listitem><para>May 17th, 2002 [bdubbs]: Chapter 11 - Inserted 
-+text about Window Mangers.  Chapter 13 - Added stubs for KDE.
-+Updated links for QT and objprelink.</para></listitem>
-+
-+<listitem><para>May 17th, 2002 [bdubbs]: Chapter 10 - Updated
-+XFree86 sections. Corrected kernel make commands and changed 
-+url references to links.</para></listitem>
-+
-+<listitem><para>May 16th, 2002 [bdubbs]: Chapter 10 - Added
-+XFree86. Updated data for objprelink.</para></listitem>
-+
-+<listitem><para>May 16th, 2002 [larry]: Chapter 05 - Added
-+unzip-5.50.</para></listitem>
-+
-+<listitem><para>May 15th, 2002 [markh]: Chapter 02 - Fix up formatting
-+in traceroute section.</para></listitem>
-+
-+<listitem><para>May 15th, 2002 [markh]: Chapter 06 and 09.  Update to
-+dhcp-3.0pl1.</para></listitem>
-+
-+<listitem><para>May 15th, 2002 [markh]: Chapter 04 - Update to
-+libpng-1.2.2 and fix imlib so it works with this libpng
-+version.</para></listitem>
-+
-+<listitem><para>May 15th, 2002 [markh]: Chapter 08 - Update to
-+postfix-1.1.8.  Chapter 13 - Update to qt-3.0.4.</para></listitem>
-+
-+<listitem><para>May 15th, 2002 [markh]: Chapter 04 - Add libxml2 and
-+libxslt (from Larry).</para></listitem>
-+
-+<listitem><para>May 15th, 2002 [markh]: Chapter 17 - SDL (to 1.2.4) and
-+XMMS (to 1.2.7) update from Jeroen.</para></listitem>
-+
-+<listitem><para>May 15th, 2002 [markh]: Chapter 13 - Add objprelink and
-+update QT instructions to match.</para></listitem>
-+
-+<listitem><para>May 15th, 2002 [markh]: Chapter 06 - Firewalling.
-+Changed references to <filename>/etc/init.d</filename> -->
-+<filename>/etc/rc.d/init.d</filename>.</para></listitem>
-+
-+<listitem><para>May 15th, 2002 [markh]: Chapter 06 - DHCP.  Fixed
-+extraneous line in dhclient.conf creation command.</para></listitem>
-+
-+<listitem><para>May 15th, 2002 [markh]: Chapter 05 - Alsa.  Fixed typo
-+in chmod command.  Added note about manually creating
-+<filename>/etc/asound.conf</filename> so that alsactl doesn't baulk on
-+first startup.</para></listitem>
-+
-+<listitem><para>April 29th, 2002 [markh]: Chapter 06 - Add DHCP_STOP
-+variable to DHCP scripts.</para></listitem>
-+
-+<listitem><para>April 28th, 2002 [markh]: Chapter 04 - Add
-+imlib.</para></listitem>
-+
-+<listitem><para>April 28th, 2002 [markh]: Chapter 02, 04, 08 - Minor fixes
-+to daemontools, libpng, libmng and postfix instructions.</para></listitem>
-+
-+<listitem><para>April 28th, 2002 [markh]: Chapter 05 - Fix to alsa
-+install instructions (added a missing 's' and \).</para></listitem>
-+
-+<listitem><para>April 20th, 2002 [markh]: Chapter 20 - Add
-+cdrtools-1.10.</para></listitem>
-+
-+<listitem><para>April 20th, 2002 [markh]: Chapter 09 - Add DHCP server
-+instructions.</para></listitem>
-+
-+<listitem><para>April 20th, 2002 [markh]: Chapter 06 - We now have DHCP
-+client configuration instructions.</para></listitem>
-+
-+<listitem><para>April 20th, 2002 [markh]: Chapter 08 and Appendix A -
-+Update to postfix-1.1.7 and keep runlevels list in sync with LFS-1.9
-+(from Larry).</para></listitem>
-+
-+<listitem><para>April 7th, 2002 [markh]: Chapter 07 - Added curl.
-+Chapter 18 - Added vorbistools.</para></listitem>
-+
-+<listitem><para>April 7th, 2002 [markh]: Chapter 17 - Added libao,
-+libogg, libvorbis.</para></listitem>
-+
-+<listitem><para>April 7th, 2002 [markh]: Chapter 08 - Postfix update
-+from Larry and fix script to use spaces instead of
-+tabs.</para></listitem>
-+
-+<listitem><para>April 7th, 2002 [markh]: Chapter 05 - Applied fcron
-+updates (two of them) from Larry.  Moves to fcron-2.9.0 with a few
-+fixes.</para></listitem>
-+
-+<listitem><para>April 7th, 2002 [markh]: Daemontools - moved to using
-+<userinput>telinit -Q</userinput> instead of <userinput>kill -HUP
-+1</userinput> following user comments on blfs-dev.</para></listitem>
-+
-+<listitem><para>April 7th, 2002 [markh]: Chapter 17 - Add
-+audiofile-0.2.3.</para></listitem>
-+
-+<listitem><para>March 28th, 2002 [markh]: Chapter 08 - Add postfix-1.1.5
-+instructions.</para></listitem>
-+
-+<listitem><para>March 28th, 2002 [markh]: Chapter 13 - Update to
-+QT-3.0.3.</para></listitem>
-+
-+<listitem><para>March 27th, 2002 [markh]: Chapter 07 and 09 - Added
-+dhcp package instructions.</para></listitem>
-+
-+<listitem><para>March 26th, 2002 [markh]: Chapter 04 - Add pcre-3.9
-+instructions.</para></listitem>
-+
-+<listitem><para>March 26th, 2002 [markh]: Chapter 13 - Added initial set
-+of qt instructions.</para></listitem>
-+
-+<listitem><para>March 26th, 2002 [markh]: Chapter 05 - Fcron update to
-+2.1.0 and a few miscellaneous fixes from Larry.</para></listitem>
-+
-+<listitem><para>March 25th, 2002 [markh]: Chapter 05 - Fix the mistake
-+whereby we tried to add lines to <filename
-+class="directory">/etc/sysconfig</filename> instead of
-+<filename>/etc/syslog.conf</filename>.</para></listitem>
-+
-+<listitem><para>March 25th, 2002 [markh]: Appendix A and other sections
-+- Add the initial tables of rc?.d symlinks.  At the same time, make sure
-+scripts are set to 755 (to be executable) and sort out the numbering of
-+the scripts (some were still using three digits from the old-style
-+links).</para></listitem>
-+
-+<listitem><para>March 25th, 2002 [markh]: Chapter 05 - Added the
-+"which" page.</para></listitem>
-+
-+<listitem><para>March 20th, 2002 [markh]: Moved all homeless packages to
-+a new temporary place in Chapter 02 until homes are found for them.
-+This leaves appendix A empty for the symlink list.</para></listitem>
-+
-+<listitem><para>March 20th, 2002 [markh]: Chapter 03 - Added random
-+script instructions.</para></listitem>
-+
-+<listitem><para>March 15th, 2002 [markh]: Chapter 05 - Small update to
-+fcron instructions.  Chapter 09 - Small update to OpenSSH
-+instructions.</para></listitem>
-+
-+<listitem><para>March 11th, 2002 [markh]: Chapter 09 - Add OpenSSH-3.1p1
-+install instructions.  Chapter 07 - Add reference about installing
-+OpenSSH client.</para></listitem>
-+
-+<listitem><para>March 11th, 2002 [markh]: Chapter 05 - Update fcron
-+instructions (syslog related changes).</para></listitem>
-+
-+<listitem><para>March 11th, 2002 [markh]: Chapter 02 - Add comment about
-+using bootscripts with LFS-3.2 and later.  Chapter 05 - Change gpm and
-+alsa scripts to work with LFS-3.2 and later.</para></listitem>
-+
-+<listitem><para>March 11th, 2002 [markh]: Chapter 04 - Update to
-+zlib-1.1.4.</para></listitem>
-+
-+<listitem><para>March 2nd, 2002 [markh]: Chapter 1 - Credits - Modify
-+credits list so that each author is only listed once with a complete
-+list of what they did (it makes the list smaller).</para></listitem>
-+
-+<listitem><para>March 2nd, 2002 [markh]: Chapter 5 - Add fcron-2.0.0
-+instructions from Larry Lawrence.</para></listitem>
-+
-+<listitem><para>February 24th, 2002 [markh]: Chapter 5 - Update to
-+gpm-1.20.0.</para></listitem>
-+
-+<listitem><para>February 21st, 2002 [markh]: Argh.. I've been writing
-+the wrong date all day!  Changed all Feb 20th entries to Feb
-+21st and corrected the book's date.</para></listitem>
-+
-+<listitem><para>February 21st, 2002 [markh]: Chapter 7 - Update to
-+ncftp-3.1.2.</para></listitem>
-+
-+<listitem><para>February 21st, 2002 [markh]: Chapter 5 - Update to
-+db-4.0.14.</para></listitem>
-+
-+<listitem><para>February 21st, 2002 [markh]: Chapter 4 - Update to
-+lcms-1.08, libpng-1.2.1 and libtiff-3.5.7.</para></listitem>
-+
-+<listitem><para>February 21st, 2002 [markh]: Add chapters 18-20 as
-+placeholders for multimedia section and move SDL into ch1 and
-+cdparanoia, mpg123 and XMMS into ch18.</para></listitem>
-+
-+<listitem><para>February 21st, 2002 [markh]: Chapter 5 - Move cvs and db 
-+to here from appendix a.</para></listitem>
-+
-+<listitem><para>February 19th, 2002 [markh]: Chapter 6 - Update to
-+hdparm-4.6 and move it here from appendix a.</para></listitem>
-+
-+<listitem><para>February 19th, 2002 [markh]: Chapter 6 - Update to 
-+wvdial-1.50 and add wvstreams-3.64 which is required by the new
-+version of wvdial.</para></listitem>
-+
-+<listitem><para>February 19th, 2002 [markh]: Chapter 6 - Add 
-+ppp.</para></listitem>
-+
-+<listitem><para>February 19th, 2002 [markh]: Chapter 6 - Move wvdial to
-+here from appendix A.</para></listitem>
-+
-+<listitem><para>February 15th, 2002 [markh]: Chapter 6 - DHCP - Added
-+initial DHCP section.</para></listitem>
-+
-+<listitem><para>February 14th, 2002 [markh]: Chapter 6 - Firewalling
-+update from Henning.</para></listitem>
-+
-+<listitem><para>January 3rd, 2002 [markh]: Changed alsa instructions to
-+include --with-kernel= for robustness.</para></listitem>
-+
-+<listitem><para>January 1st, 2002 [markh]: Started large rearrangement
-+of book.  Many modifications made.  Fixed up quite a few things.  Happy New 
-+Year to you all!</para></listitem>
-+
-+<listitem><para>December 31st, 2001 [markh]: Gpm - Fixed symlink
-+creation so it actually works.</para></listitem>
-+
-+<listitem><para>December 22nd, 2001 [markh]: Zlib - Added instructions
-+to copy manual page as it isn't installed by default.</para></listitem>
-+
-+<listitem><para>December 20th, 2001 [markh]: Chapter 3 - Added the vimrc
-+page.</para></listitem>
-+
-+<listitem><para>December 20th, 2001 [markh]: Appendix A - Added alsa
-+instructions by Alex Kloss.</para></listitem>
-+
-+<listitem><para>December 20th, 2001 [markh]: Chapter 2 - More text
-+added.</para></listitem>
-+
-+<listitem><para>December 1st, 2001 [markh]: Chapter 3 - Added some
-+corrections to the inputrc page regarding the role of /etc/inputrc and
-+~/.inputrc.</para></listitem>
-+
-+<listitem><para>November 30th, 2001 [markh]: Appendix A - Added
-+fetchmail instructions by Paul Campbell.</para></listitem>
-+
-+<listitem><para>November 26th, 2001 [markh]: General - Added
-+<&dbhtml> tags all over the place to divide generated HTML
-+into directories.</para></listitem>
-+
-+<listitem><para>November 26th, 2001 [markh]: Chapter 3 - Added
-+/etc/inputrc details by Chris Lynn and /etc/issue details by
-+me.</para></listitem>
-+
-+<listitem><para>November 5th, 2001 [markh]: Appendix A - Added gpm
-+recommendation to links instructions.</para></listitem>
-+
-+<listitem><para>October 25th, 2001 [markh]: Chapter 6 - Firewalling
-+section added to book.</para></listitem>
-+
-+<listitem><para>October 25th, 2001 [markh]: Appendix A - wvdial-1.41
-+added.</para></listitem>
-+
-+<listitem><para>October 20th, 2001 [markh]: Appendix A - hdparm-4.2
-+added.</para></listitem>
-+
-+<listitem><para>October 20th, 2001 [markh]: Appendix B removed.  Credits
-+moved to a page in Chapter 1.</para></listitem>
-+
-+<listitem><para>October 20th, 2001 [markh]: Appendix A - All current
-+sets of installation instructions changed to install items in /usr
-+instead of /usr/local.</para></listitem>
-+
-+<listitem><para>October 20th, 2001 [markh]: Chapter 2 - Added the /usr
-+versus /usr/local debate section.</para></listitem>
-+
-+<listitem><para>October 14th, 2001 [markh]: Chapter 1 - Added lots of
-+text.</para></listitem>
-+
-+<listitem><para>September 20th, 2001 [markh]: Appendix A - Small
-+formatting fix to db instructions so they copy and paste
-+properly.</para></listitem>
-+
-+<listitem><para>September 20th, 2001 [markh]: Appendix A - Updated to
-+libmng-1.0.3 and libpng-1.2.0.</para></listitem>
-+
-+<listitem><para>September 20th, 2001 [markh]: Appendix A - Fixed lcms
-+instructions so that they actually work...</para></listitem>
-+
-+<listitem><para>September 14th, 2001 [markh]: Appendix A - Links
-+installation instructions added.</para></listitem>
-+
-+<listitem><para>September 14th, 2001 [markh]: Appendix A - Lynx
-+installation instructions added.</para></listitem>
-+
-+<listitem><para>September 14th, 2001 [markh]: Appendix A - Finished off
-+openssl instructions.</para></listitem>
-+
-+<listitem><para>September 6th, 2001 [markh]: Appendix A - Added
-+daemontools</para></listitem>
-+
-+<listitem><para>September 4th, 2001 [markh]: General - lots and lots of
-+things - setting up xml structure, adding instructions etc.</para></listitem>
-+
-+</itemizedlist>
-+
-+</sect1>
-+
-
-Index: introduction/welcome/contact.xml
-===================================================================
---- introduction/welcome/contact.xml	(révision 0)
-+++ introduction/welcome/contact.xml	(révision 3)
-@@ -0,0 +1,14 @@
-+<sect1 id="intro-welcome-contactinfo">
-+<?dbhtml filename="contactinfo.html" dir="introduction"?>
-+<title>Contact information</title>
-+
-+<para>Please direct your emails to one of the BLFS mailing lists. See
-+<xref linkend="intro-welcome-maillists"/> for more information on the
-+available mailing lists.</para>
-+
-+<para>The current BLFS maintainer is &maintainer-fullname;.  If you need
-+to reach &maintainer-firstname;, send an email to
-+<ulink url="mailto:&maintainer-address">&maintainer-address;</ulink>.</para>
-+
-+</sect1>
-+
-
-Index: introduction/welcome/conventions.xml
-===================================================================
---- introduction/welcome/conventions.xml	(révision 0)
-+++ introduction/welcome/conventions.xml	(révision 3)
-@@ -0,0 +1,49 @@
-+<sect1 id="intro-welcome-conventions">
-+<?dbhtml filename="conventions.html" dir="introduction"?>
-+<title>Conventions used in this book</title>
-+
-+<para>To make things easy to follow, there are a number of conventions used
-+throughout the book.  Following are some examples:</para>
-+
-+<para><userinput>./configure --prefix=/usr</userinput></para>
-+
-+<blockquote><para>This form of text is designed to be typed exactly 
-+as seen unless otherwise noted in the surrounding text.  It is also used 
-+in the explanation sections to identify which of the commands is being 
-+referred to.</para></blockquote>
-+
-+<para><filename>install-info: unknown option 
-+`--dir-file=/mnt/lfs/usr/info/dir'</filename></para>
-+
-+<blockquote><para>This form of text (fixed width text) is showing screen 
-+output, probably as the result of commands issued and is also used to 
-+show filenames such as <filename>/etc/lilo.conf</filename></para></blockquote>
-+
-+<para><emphasis>Emphasis</emphasis></para>
-+
-+<blockquote><para>This form of text is used for several purposes in the 
-+book but mainly to emphasize important points or to give examples as to 
-+what to type.</para></blockquote>
-+
-+<para><ulink url="http://www.linuxfromscratch.org/">http://www.linuxfromscratch.org/</ulink></para>
-+
-+<blockquote><para>This form of text is used for hyperlinks, both within the 
-+book and to external pages such as HowTo's, download locations,
-+websites, etc.</para></blockquote>
-+
-+<para><screen><userinput>cat > $LFS/etc/group << "EOF"</userinput>
-+	root:x:0:
-+	bin:x:1:
-+	......
-+<userinput>EOF</userinput>
-+</screen>
-+</para>
-+
-+<blockquote><para>This type of section is used mainly when creating 
-+configuration files.  The first command (in bold) tells the system to create 
-+the file $LFS/etc/group from whatever is typed on the following lines until 
-+the sequence EOF is encountered. Therefore, this whole section is generally 
-+typed as seen.</para></blockquote>
-+
-+</sect1>
-+
-
-Index: introduction/welcome/credits.xml
-===================================================================
---- introduction/welcome/credits.xml	(révision 0)
-+++ introduction/welcome/credits.xml	(révision 3)
-@@ -0,0 +1,136 @@
-+<sect1 id="intro-welcome-credits">
-+<?dbhtml filename="credits.html" dir="introduction"?>
-+<title>Credits</title>
-+
-+<para>Many people have contributed both directly and indirectly to BLFS.
-+This page lists all of those we can think of.  We may well have
-+missed people out and if you feel this is the case, drop us line.  Many
-+thanks to all of the LFS community for their assistance with this
-+project.  If you are in the list and wish to have your email address
-+included, again please drop us a line to &maintainer-address; and we'll
-+be happy to add it.  We don't include email addresses by default so if
-+you want it included, please state so when you contact us.</para>
-+
-+<sect2>
-+<title>Editors</title>
-+<itemizedlist>
-+
-+<listitem><para><emphasis>Editor:</emphasis> Mark
-+Hymers <ulink
-+url="mailto:&maintainer-address;"><&maintainer-address;></ulink></para></listitem>
-+
-+<listitem><para><emphasis>Co-Editors:</emphasis> Bruce 
-+Dubbs and Larry Lawrence</para></listitem>
-+
-+</itemizedlist>
-+</sect2>
-+
-+<sect2>
-+<title>Text Authors</title>
-+<itemizedlist>
-+
-+<listitem><para>Chapter 01.  Based on the LFS introductory text by
-+<emphasis>Gerard Beekmans</emphasis>, modified by <emphasis>Mark
-+Hymers</emphasis> for BLFS.</para></listitem>
-+
-+<listitem><para>Chapter 02: The /usr versus /usr/local
-+debate: <emphasis>Andrew McMurry</emphasis>.</para></listitem>
-+
-+<listitem><para>Chapter 03: /etc/inputrc: <emphasis>Chris
-+Lynn</emphasis>.</para></listitem>
-+
-+<listitem><para>Chapter 03: Customising your logon & vimrc: <emphasis>Mark
-+Hymers</emphasis>.</para></listitem>
-+
-+<listitem><para>Chapter 03: Random number script <emphasis>Larry
-+Lawrence</emphasis>.</para></listitem>
-+
-+<listitem><para>Chapter 05: Which <emphasis>Mark Hymers</emphasis> with
-+many thanks to <emphasis>Seth Klein</emphasis> and <emphasis>Jesse 
-+Tie-Ten-Quee</emphasis>.</para></listitem>
-+
-+<listitem><para>Chapter 06: <!--<xref
-+linkend="ch06-firewall"/>-->Firewalling: <emphasis>Henning
-+Rohde with thanks to Jeff Bauman</emphasis>.</para></listitem>
-+
-+<listitem><para>Chapter 10: XFree86 <emphasis>Bruce Dubbs</emphasis>.</para></listitem>
-+
-+<listitem><para>Chapter 11: Intro to Window Managers 
-+<emphasis>Bruce Dubbs</emphasis>.</para></listitem>
-+
-+<listitem><para>Chapter 12: GNOME: <emphasis>James Iwanek</emphasis></para></listitem>
-+
-+<listitem><para>Chapter 13: QT: <emphasis>Larry Lawrence</emphasis>
-+objprelink and KDE: <emphasis>Bruce Dubbs</emphasis>.</para>
-+</listitem>
-+
-+</itemizedlist>
-+</sect2>
-+
-+<sect2>
-+<title>Installation Instruction Authors</title>
-+<itemizedlist>
-+
-+<listitem><para>Alsa: <emphasis>Alex Kloss</emphasis></para></listitem>
-+
-+<listitem><para>ATK, audiofile, cdrdao, cdrtools, curl, dhcp, fcron, imlib,
-+GLib2, GTK+2, libao, libogg, libvorbis, libxml2, libxslt, OpenSSH, Pango, pccts, pcre, pkgconfig, postfix, QT, unzip and vorbis-tools: <emphasis>Larry Lawrence</emphasis></para></listitem>
-+
-+<listitem><para>CDParanoia, mpg123, SDL and XMMS: <emphasis>Jeroen
-+Coumans</emphasis></para></listitem>
-+
-+<listitem><para>cvs, gpm, hdparm, libjpeg, mng, png, tiff and ungif,
-+links, lynx, openssl, which and zlib: <emphasis>Mark 
-+Hymers</emphasis></para></listitem>
-+
-+<listitem><para>daemontools, traceroute and ucspi-tcp: <emphasis>Jeff
-+Bauman</emphasis></para></listitem>
-+
-+<listitem><para>db and lcms: <emphasis>Jeremy Jones and Mark
-+Hymers</emphasis></para></listitem>
-+
-+<listitem><para>fetchmail and wvdial: <emphasis>Paul
-+Campbell</emphasis></para></listitem>
-+
-+<listitem><para>gdk, GLib, GTK+ and libxml: <emphasis>James
-+Iwanek</emphasis></para></listitem>
-+
-+<listitem><para><!--<xref linkend="iptables"/>-->iptables: <emphasis>Henning
-+Rohde</emphasis></para></listitem>
-+
-+</itemizedlist>
-+</sect2>
-+
-+<sect2>
-+<title>General Acknowledgments</title>
-+
-+<itemizedlist>
-+
-+<listitem><para><emphasis>Gerard Beekmans</emphasis> for generally
-+putting up with us and for running the whole LFS project.</para></listitem>
-+
-+<listitem><para><emphasis>Bruce Dubbs</emphasis> for writing the kde.txt
-+hint from which we gathered much useful information.</para></listitem>
-+
-+<listitem><para><emphasis>Lee Harris</emphasis> for writing the gpm.txt
-+hint on which our gpm instructions are based</para></listitem>
-+
-+<listitem><para><emphasis>Marc Heerdink</emphasis> for writing the
-+gpm2.txt hint on which our gpm instruction are based.</para></listitem>
-+
-+<listitem><para><emphasis>Jeremy Jones</emphasis> (otherwise known as
-+<emphasis>mca</emphasis>) for hacking Makefiles and general
-+assistance.</para></listitem>
-+
-+<listitem><para><emphasis>J_Man</emphasis> for submitting a
-+gpm-1.19.3.diff file on which our gpm instructions are
-+based.</para></listitem>
-+
-+<listitem><para><emphasis>Scot Mc Pherson</emphasis> for writing the gnome-1.4.txt
-+hint on which chapter 12 is closely based</para></listitem>
-+
-+</itemizedlist>
-+</sect2>
-+
-+</sect1>
-+
-
-Index: introduction/welcome/maillists.xml
-===================================================================
---- introduction/welcome/maillists.xml	(révision 0)
-+++ introduction/welcome/maillists.xml	(révision 3)
-@@ -0,0 +1,266 @@
-+<sect1 id="intro-welcome-maillists" xreflabel="Mailing lists and archives">
-+<?dbhtml filename="maillists.html" dir="introduction"?>
-+<title>Mailing lists and archives</title>
-+
-+<para>The linuxfromscratch.org server is hosting the following publicly 
-+accessible mailing lists:</para>
-+
-+<itemizedlist>
-+
-+<listitem><para>blfs-dev</para></listitem>
-+
-+<listitem><para>blfs-book</para></listitem>
-+
-+<listitem><para>blfs-support</para></listitem>
-+
-+<listitem><para>lfs-support</para></listitem>
-+
-+<listitem><para>lfs-dev</para></listitem>
-+
-+<listitem><para>lfs-announce</para></listitem>
-+
-+<listitem><para>lfs-security</para></listitem>
-+
-+<listitem><para>lfs-book</para></listitem>
-+
-+<listitem><para>alfs-discuss</para></listitem>
-+
-+</itemizedlist>
-+
-+<sect2>
-+<title>blfs-book</title>
-+
-+<para>The blfs-book list is used by the BLFS-BOOK editors
-+to co-ordinate blfs-book's maintenance, like XML issues and the like.
-+Actual discussion on what should be added and removed should take place
-+on blfs-dev.</para>
-+
-+</sect2>
-+
-+<sect2>
-+<title>blfs-dev</title>
-+
-+<para>The blfs-dev mailing list discusses matters related to the
-+BLFS-BOOK (Beyond LFS).  If problems with the book come up, a bug
-+or two need to be
-+reported, or suggestions to improve the book (such as suggestions as to
-+installation instructions to add) are to be made, this mailing list
-+is the right one.</para>
-+
-+<para>Requests for help with programs beyond the base LFS setup (not
-+just those in BLFS) should go to blfs-support.</para>
-+
-+</sect2>
-+
-+<sect2>
-+<title>blfs-support</title>
-+
-+<para>The blfs-support list deals with support requests for any software
-+not installed in the LFS book.  The list is not just for help with
-+software explicitly mentioned in the BLFS book, any software beyond that
-+installed as part of the base LFS system can be discussed here.</para>
-+
-+</sect2>
-+
-+<sect2>
-+<title>lfs-support</title>
-+
-+<para>The lfs-support mailing list provides support to users building an
-+LFS system as far as the end of the main book.  Requests for help with
-+installing software beyond the base system should go to the blfs-support
-+list.</para>
-+
-+</sect2>
-+
-+<sect2>
-+<title>lfs-dev</title>
-+
-+<para>The lfs-dev mailing list discusses matters strictly related to the
-+LFS-BOOK. If problems with the book come up, a bug or two need to be
-+reported, or suggestions to improve the book should be made,
-+this mailing list is the right one.</para>
-+
-+<para>Requests for help should go to lfs-support or blfs-support.</para>
-+
-+</sect2>
-+
-+<sect2>
-+<title>lfs-announce</title>
-+
-+<para>The lfs-announce list is a moderated list. It can be subscribed
-+to, but
-+you can't post any messages to this list. This list is used to announce
-+new stable releases. The lfs-dev list will carry information about
-+development releases as well. If a user is already on the lfs-dev
-+list, there's little use subscribing to
-+this list as well because everything that is posted to the lfs-announce
-+list will be posted to the lfs-dev list as well.</para>
-+
-+</sect2>
-+
-+<sect2>
-+<title>lfs-security</title>
-+
-+<para>The lfs-security mailing list discusses security-related matters.
-+Security concerns or security problems with a package used by LFS,
-+should be addressed on this list.</para>
-+
-+</sect2>
-+
-+<sect2>
-+<title>lfs-book</title>
-+
-+<para>The lfs-book list is used by the LFS-BOOK editors to co-ordinate
-+lfs-book's maintenance, like XML issues and the like. Actual discussion
-+on what should be added and removed take place on lfs-dev.</para>
-+
-+</sect2>
-+
-+<sect2>
-+<title>alfs-discuss</title>
-+
-+<para>The alfs-discuss list discusses the development of ALFS, which
-+stands for
-+Automated Linux From Scratch. The goal of this project is to develop an
-+installation tool that can install an LFS system automatically.
-+It's main goal is to speed up compilation by taking away the need to
-+manually enter the commands to configure, compile, and install
-+packages.</para>
-+
-+</sect2>
-+
-+<sect2>
-+<title>Mail archives</title>
-+
-+<para>All these lists are archived and can be viewed online at
-+<ulink url="http://archive.linuxfromscratch.org/mail-archives"/> or downloaded
-+from <ulink url="&ftp-root;/mail-archives"/>.</para>
-+
-+</sect2>
-+
-+<sect2>
-+<title>How to subscribe?</title>
-+
-+<para>Any of the above-mentioned mailinglists can be subscribed to by
-+sending an email to <ulink 
-+url="mailto:listar at linuxfromscratch.org">listar at linuxfromscratch.org</ulink>
-+and writing <emphasis>subscribe listname</emphasis> as the subject
-+header of the message.</para>
-+
-+<para>Multiple lists at the same time can be subscribed to by using
-+one email. This is done by leaving the subject blank and putting all the
-+commands in the body of the email. The email will look like:</para>
-+
-+<blockquote><literallayout>To: listar at linuxfromscratch.org
-+Subject:
-+
-+subscribe lfs-dev
-+subscribe blfs-support
-+subscribe alfs-discuss</literallayout></blockquote>
-+
-+<para>After the email is sent, the Listar program will reply with an
-+email requesting a confirmation of the subscription request. After
-+this confirmation email is sent back, Listar will send an
-+email again with the message that the user has been subscribed to the
-+list(s) along with an introduction message for that particular
-+list.</para>
-+
-+</sect2>
-+
-+<sect2>
-+<title>How to unsubscribe?</title>
-+
-+<para>To unsubscribe from a list, send an email 
-+to <ulink url="mailto:listar at linuxfromscratch.org"/> and 
-+write <emphasis>unsubscribe listname</emphasis> as the subject header of 
-+the message.</para>
-+
-+<para>Multiple lists can be unsubscribed at the same time
-+using one email. This is done by leaving the subject header blank and
-+putting all the commands in the body of the email. The email will look
-+like: </para>
-+
-+<blockquote><literallayout>To: listar at linuxfromscratch.org
-+Subject:
-+
-+unsubscribe lfs-dev
-+unsubscribe blfs-support
-+unsubscribe alfs-discuss</literallayout></blockquote>
-+
-+<para>After the email is sent, the Listar program will reply with an
-+email requesting a confirmation of the unsubscription
-+request. After this confirmation email is sent back, Listar will
-+send an email again with the message that the user has been unsubscribed
-+from the list(s).</para>
-+
-+</sect2>
-+
-+<sect2>
-+<title>Other list modes</title>
-+
-+<para>The modes that can be set by a user require sending an email to
-+<ulink
-+url="mailto:listar at linuxfromscratch.org">listar at linuxfromscratch.org</ulink>.
-+The modes themselves are set by writing
-+the appropriate commands in the subject header of the message.</para>
-+
-+<para>As the name implies, the <emphasis>Set command</emphasis> tells
-+what
-+to write to set a mode. The <emphasis>Unset command</emphasis> tells
-+what to write to unset a mode.</para>
-+
-+<para>The listname in the example subject headers should be replaced
-+with the
-+listname to which
-+the mode is going to be applied to. If more than one mode is to be set
-+(to
-+the same list or multiple lists) with one email, this can be done by
-+leaving the subject header blank and writing all the commands in the
-+body of
-+the message instead.</para>
-+
-+</sect2>
-+
-+<sect2>
-+<title>Digests</title>
-+
-+<literallayout>
-+Set command: <emphasis>set listname digest</emphasis>
-+Unset command: <emphasis>unset listname digest</emphasis>
-+</literallayout>
-+
-+<para>All lists have the digest mode available which can be set after a
-+user
-+has subscribed to a list. Being in digest mode will
-+cause you to stop receiving individual messages as they are posted to
-+the list and instead receive one email a day containing all
-+the messages posted to the list during that day.</para>
-+
-+<para>There is a second digest mode called digest2. When a user is set
-+to this
-+mode he will receive the daily digests but will also continue to
-+receive the individual messages to the lists as they are posted. To
-+set this mode, substitute <emphasis>digest</emphasis> for
-+<emphasis>digest2</emphasis> in the command.</para>
-+
-+</sect2>
-+
-+<sect2>
-+<title>Vacation</title>
-+
-+<literallayout>
-+Set command: <emphasis>set listname vacation</emphasis>
-+Unset command: <emphasis>unset listname vacation</emphasis>
-+</literallayout>
-+
-+<para>If a user is going to be away for a while or wishes to stop
-+receiving
-+messages from the lists but doesn't want to unsubscribe, he can change
-+to vacation mode. This has the same effect as unsubscribing,
-+but without having to go through the unsubscribe process and
-+then later through the subscribe process again.</para>
-+
-+</sect2>
-+
-+</sect1>
-+
-
-Index: introduction/welcome/newsserver.xml
-===================================================================
---- introduction/welcome/newsserver.xml	(révision 0)
-+++ introduction/welcome/newsserver.xml	(révision 3)
-@@ -0,0 +1,13 @@
-+<sect1 id="intro-welcome-newsserver">
-+<?dbhtml filename="newsserver.html" dir="introduction"?>
-+<title>News server</title>
-+
-+<para>All the mailing lists hosted at linuxfromscratch.org are also 
-+accessible via the NNTP server. All messages posted to a mailing list 
-+will be copied to it's correspondent newsgroup, and vice versa.</para>
-+
-+<para>The news server can be reached at <ulink
-+url="news:news.linuxfromscratch.org"/>.</para>
-+
-+</sect1>
-+
-
-Index: introduction/welcome/version.xml
-===================================================================
---- introduction/welcome/version.xml	(révision 0)
-+++ introduction/welcome/version.xml	(révision 3)
-@@ -0,0 +1,48 @@
-+<sect1 id="intro-welcome-version" xreflabel="Book Version">
-+<?dbhtml filename="version.html" dir="introduction"?>
-+<title>Book version</title>
-+
-+<para>This is BLFS-BOOK version &version; dated &releasedate;. If this 
-+version is older than a month a newer version is probably already available 
-+for download. Check one of the mirror sites below for updated
-+versions.</para>
-+
-+<para>Below is a list of our current HTTP and FTP mirror sites as
-+of October 14th 2001. This list might not be accurate anymore. 
-+The latest info can be found on our website at
-+<ulink url="http://beyond.linuxfromscratch.org">http://beyond.linuxfromscratch.org</ulink>.</para>
-+
-+<sect2>
-+<title>HTTP Mirrors</title>
-+
-+<sect3>
-+<title>North America</title>
-+
-+<itemizedlist>
-+
-+<listitem><para>Fremont, California, USA [100 Mbit] - <ulink
-+url="http://beyond.linuxfromscratch.org/blfs/intro.shtml">http://beyond.linuxfromscratch.org/blfs/intro.shtml</ulink></para></listitem>
-+
-+<listitem><para>Columbus, Ohio, USA [1 Mbit] - <ulink
-+url="http://beyond.us.linuxfromscratch.org/blfs/intro.shtml">http://beyond.us.linuxfromscratch.org/blfs/intro.shtml</ulink></para></listitem>
-+
-+</itemizedlist>
-+
-+</sect3>
-+
-+<sect3>
-+<title>Europe</title>
-+
-+<itemizedlist>
-+
-+<listitem><para>Teeside, United Kingdom [256 Kbit] - <ulink
-+url="http://beyond.linuxfromscratch.co.uk/blfs/intro.shtml">http://beyond.linuxfromscratch.co.uk/blfs/intro.shtml</ulink></para></listitem>
-+
-+</itemizedlist>
-+
-+</sect3>
-+
-+</sect2>
-+
-+</sect1>
-+
-
-Index: introduction/welcome/welcome.xml
-===================================================================
---- introduction/welcome/welcome.xml	(révision 0)
-+++ introduction/welcome/welcome.xml	(révision 3)
-@@ -0,0 +1,23 @@
-+<chapter id="intro-welcome" xreflabel="Welcome to BLFS">
-+<?dbhtml filename="welcome.html" dir="introduction"?>
-+<title>Welcome to BLFS</title>
-+<para>The Beyond LinuxFromScratch book is designed to carry on from
-+where the LFS book leaves off.  Unlike the LFS book, it isn't designed
-+to be followed straight through.  Reading the <xref
-+linkend="intro-welcome-whichsections"/> part of this chapter should
-+help guide you through the book.</para>
-+
-+<para>Please read most of this part of the book carefully as it explains
-+quite a few of the conventions we use throughout the book.</para>
-+
-+&intro-welcome-conventions;
-+&intro-welcome-version;
-+&intro-welcome-acks;
-+&intro-welcome-credits;
-+&intro-welcome-changelog;
-+&intro-welcome-whichsect;
-+&intro-welcome-mailinglists;
-+&intro-welcome-newsserver;
-+&intro-welcome-contact;
-+&intro-welcome-askhelp;
-+</chapter>
-
-Index: introduction/welcome/which.xml
-===================================================================
---- introduction/welcome/which.xml	(révision 0)
-+++ introduction/welcome/which.xml	(révision 3)
-@@ -0,0 +1,50 @@
-+<sect1 id="intro-welcome-whichsections" xreflabel="Which sections of the book?">
-+<?dbhtml filename="which.html" dir="introduction"?>
-+<title>Which sections of the book do I want?</title>
-+
-+<para>Unlike the LinuxFromScratch book, BLFS isn't designed to be
-+followed in a linear manner.  This is because LFS provides instructions
-+on how to create a base system which is capable of turning into anything 
-+from a web server to a multimedia desktop system.  BLFS is where we try
-+to guide you through going from the base system to your intended
-+destination and so choice is very much involved.</para>
-+
-+<para>MUCH OF THIS PAGE HAS TO BE RE-WRITTEN TO FIT THE NEW LAYOUT.  THE
-+OLD TEXT IS STILL IN THE XML SOURCE AND THE NEW TEXT CAN BE BASED ON
-+IT.</para>
-+
-+<!-- THIS NEEDS REWRITING TO FIT THE NEW LAYOUT
-+<para>Everyone who reads the book will want to read certain sections.
-+<xref linkend="part1"/> which you are reading now contains generic
-+information.  Especially take note of the information 
-+in <xref linkend="chapter02"/> as this chapter contains comments about 
-+how to unpack software and various other aspects which apply 
-+throughout the book.</para>
-+
-+<para>Most people will want to at least browse through <xref
-+linkend="part2"/> as this contains information on general post-LFS
-+configuration issues and information on various libraries which are
-+needed by many packages.  Note that you don't have to install all of
-+these libraries to start with, each BLFS install procedure tells you
-+which packages it depends upon so you can choose the program you want
-+to install and see what it needs.</para>
-+
-+<para>Likewise, most people will probably want to look at <xref
-+linkend="chapter06"/> to deal with connecting to the Internet or your local
-+LAN.  The basic LFS book deals with setting up a static-ip based
-+ethernet connection, all other configurations such as DHCP and dial-up
-+internet connections are dealt with in this part of BLFS.</para>
-+
-+<para>Once you have dealt with these basics, you may wish to configure
-+network services such as mail.  All of this is dealt with in the
-+remainder of <xref linkend="part3"/>.  Those wanting to build servers
-+should find enough information to give them a good starting point here.</para>
-+
-+<para>Those creating desktop systems will want to look at the next three
-+parts of the book: <xref linkend="part4"/>, <xref linkend="part5"/> and
-+<xref linkend="part6"/>.</para>-->
-+
-+<para>We hope you enjoy using BLFS and find it useful.</para>
-+
-+</sect1>
-+
-
-Index: template/newitem
-===================================================================
---- template/newitem	(révision 0)
-+++ template/newitem	(révision 3)
-@@ -0,0 +1,37 @@
-+#!/bin/sh
-+
-+# Copies the template files and replaces template with the supplied package
-+# name, greatly simplifying the process of adding a new package.
-+
-+if [ -z "$1" ]
-+then
-+  echo "Creates template files for a package and fills in the package name."
-+  echo "Usage: $0 <written-package-name> <package-filename>"
-+  echo
-+  echo "Note that if you want to create the package Glib, you should"
-+  echo "call the script as: '$0 Glib glib' so that the filenames are in"
-+  echo "lower case.  If you only specify the first option, it is used"
-+  echo "for both the written and filenames."
-+  echo "Note also that *all* filenames in BLFS should be lower-case only"
-+  exit 1
-+fi
-+
-+WRITTENNAME=$1
-+
-+if [ -z "$2" ]
-+then
-+ FILENAME=$WRITTENNAME
-+else
-+ FILENAME=$2
-+fi
-+
-+pushd `dirname $0`
-+TEMPLDIR=`pwd`
-+popd
-+ 
-+for i in $TEMPLDIR/template*
-+do
-+  NEWFILE=`echo $i | sed s@$TEMPLDIR/template@$FILENAME@`
-+  echo $NEWFILE
-+  sed s/template/$WRITTENNAME/g $i > $NEWFILE
-+done
---- template/newitem	(révision 0)
-+++ template/newitem	(révision 3)
-@@ -0,0 +1,37 @@
-+#!/bin/sh
-+
-+# Copies the template files and replaces template with the supplied package
-+# name, greatly simplifying the process of adding a new package.
-+
-+if [ -z "$1" ]
-+then
-+  echo "Creates template files for a package and fills in the package name."
-+  echo "Usage: $0 <written-package-name> <package-filename>"
-+  echo
-+  echo "Note that if you want to create the package Glib, you should"
-+  echo "call the script as: '$0 Glib glib' so that the filenames are in"
-+  echo "lower case.  If you only specify the first option, it is used"
-+  echo "for both the written and filenames."
-+  echo "Note also that *all* filenames in BLFS should be lower-case only"
-+  exit 1
-+fi
-+
-+WRITTENNAME=$1
-+
-+if [ -z "$2" ]
-+then
-+ FILENAME=$WRITTENNAME
-+else
-+ FILENAME=$2
-+fi
-+
-+pushd `dirname $0`
-+TEMPLDIR=`pwd`
-+popd
-+ 
-+for i in $TEMPLDIR/template*
-+do
-+  NEWFILE=`echo $i | sed s@$TEMPLDIR/template@$FILENAME@`
-+  echo $NEWFILE
-+  sed s/template/$WRITTENNAME/g $i > $NEWFILE
-+done
-
-Index: template/README
-===================================================================
---- template/README	(révision 0)
-+++ template/README	(révision 3)
-@@ -0,0 +1,6 @@
-+These files are generic templates.
-+ 
-+The newitem script makes a copy of the files and changes all occurances
-+of template in them to the package name to save a lot of tedious work.
-+
-+Not all will always be needed
---- template/README	(révision 0)
-+++ template/README	(révision 3)
-@@ -0,0 +1,6 @@
-+These files are generic templates.
-+ 
-+The newitem script makes a copy of the files and changes all occurances
-+of template in them to the package name to save a lot of tedious work.
-+
-+Not all will always be needed
-
-Index: template/template-config.xml
-===================================================================
---- template/template-config.xml	(révision 0)
-+++ template/template-config.xml	(révision 3)
-@@ -0,0 +1,15 @@
-+<sect3>
-+<title>Configuring template</title>
-+
-+<sect4><title>Config files</title>
-+<para><userinput>List of config files</userinput></para>
-+</sect4>
-+
-+<sect4><title>Configuration Information</title>
-+
-+<para><userinput>USERINPUT GOES HERE</userinput> Blah blah blah about config.
-+</para>
-+</sect4>
-+
-+</sect3>
-+
---- template/template-config.xml	(révision 0)
-+++ template/template-config.xml	(révision 3)
-@@ -0,0 +1,15 @@
-+<sect3>
-+<title>Configuring template</title>
-+
-+<sect4><title>Config files</title>
-+<para><userinput>List of config files</userinput></para>
-+</sect4>
-+
-+<sect4><title>Configuration Information</title>
-+
-+<para><userinput>USERINPUT GOES HERE</userinput> Blah blah blah about config.
-+</para>
-+</sect4>
-+
-+</sect3>
-+
-
-Index: template/template-desc.xml
-===================================================================
---- template/template-desc.xml	(révision 0)
-+++ template/template-desc.xml	(révision 3)
-@@ -0,0 +1,17 @@
-+<sect3>
-+<title>Contents</title>
-+
-+<para>The template package contains <userinput>LISTOFFILES</userinput></para>
-+
-+</sect3>
-+
-+<sect3><title>Description</title>
-+
-+<sect4><title>item1</title>
-+<para>item1 does this</para></sect4>
-+
-+<sect4><title>item2</title>
-+<para>item2 does that</para></sect4>
-+
-+</sect3>
-+
---- template/template-desc.xml	(révision 0)
-+++ template/template-desc.xml	(révision 3)
-@@ -0,0 +1,17 @@
-+<sect3>
-+<title>Contents</title>
-+
-+<para>The template package contains <userinput>LISTOFFILES</userinput></para>
-+
-+</sect3>
-+
-+<sect3><title>Description</title>
-+
-+<sect4><title>item1</title>
-+<para>item1 does this</para></sect4>
-+
-+<sect4><title>item2</title>
-+<para>item2 does that</para></sect4>
-+
-+</sect3>
-+
-
-Index: template/template-exp.xml
-===================================================================
---- template/template-exp.xml	(révision 0)
-+++ template/template-exp.xml	(révision 3)
-@@ -0,0 +1,7 @@
-+<sect3>
-+<title>Command explanations</title>
-+
-+<para><userinput>COMMAND:</userinput> This command does something.</para>
-+
-+</sect3>
-+
---- template/template-exp.xml	(révision 0)
-+++ template/template-exp.xml	(révision 3)
-@@ -0,0 +1,7 @@
-+<sect3>
-+<title>Command explanations</title>
-+
-+<para><userinput>COMMAND:</userinput> This command does something.</para>
-+
-+</sect3>
-+
-
-Index: template/template-inst.xml
-===================================================================
---- template/template-inst.xml	(révision 0)
-+++ template/template-inst.xml	(révision 3)
-@@ -0,0 +1,9 @@
-+<sect3>
-+<title>Installation of template</title>
-+
-+<para>Install template by running the following commands:</para>
-+
-+<para><screen><userinput>./configure </userinput></screen></para>
-+
-+</sect3>
-+
---- template/template-inst.xml	(révision 0)
-+++ template/template-inst.xml	(révision 3)
-@@ -0,0 +1,9 @@
-+<sect3>
-+<title>Installation of template</title>
-+
-+<para>Install template by running the following commands:</para>
-+
-+<para><screen><userinput>./configure </userinput></screen></para>
-+
-+</sect3>
-+
-
-Index: template/template-intro.xml
-===================================================================
---- template/template-intro.xml	(révision 0)
-+++ template/template-intro.xml	(révision 3)
-@@ -0,0 +1,14 @@
-+<sect3>
-+<title>Introduction to template</title>
-+
-+<screen>Download location:              &template-download;
-+Version used:                   &template-version;
-+Package size:                   &template-size;
-+Estimated Disk space required:  &template-buildsize;</screen>
-+
-+<para>The template package contains... This is useful for...</para>
-+
-+<screen>template depends on:
-+DEPENDENCY LIST (if any)</screen>
-+
-+</sect3>
---- template/template-intro.xml	(révision 0)
-+++ template/template-intro.xml	(révision 3)
-@@ -0,0 +1,14 @@
-+<sect3>
-+<title>Introduction to template</title>
-+
-+<screen>Download location:              &template-download;
-+Version used:                   &template-version;
-+Package size:                   &template-size;
-+Estimated Disk space required:  &template-buildsize;</screen>
-+
-+<para>The template package contains... This is useful for...</para>
-+
-+<screen>template depends on:
-+DEPENDENCY LIST (if any)</screen>
-+
-+</sect3>
-
-Index: template/template.xml
-===================================================================
---- template/template.xml	(révision 0)
-+++ template/template.xml	(révision 3)
-@@ -0,0 +1,11 @@
-+<sect2 id="template" xreflabel="template-&template-version;">
-+<title>template-&template-version;</title>
-+
-+&template-intro;
-+&template-inst;
-+&template-exp;
-+&template-config;
-+&template-desc;
-+
-+</sect2>
-+
---- template/template.xml	(révision 0)
-+++ template/template.xml	(révision 3)
-@@ -0,0 +1,11 @@
-+<sect2 id="template" xreflabel="template-&template-version;">
-+<title>template-&template-version;</title>
-+
-+&template-intro;
-+&template-inst;
-+&template-exp;
-+&template-config;
-+&template-desc;
-+
-+</sect2>
-+
-
-Index: x/lib/qt/qt-config.xml
-===================================================================
-+
-+<para><screen><userinput>cat >> /etc/ld.so.conf << "EOF"</userinput>
-+# Begin qt addition to /etc/ld.so.conf
-+
-+/opt/qt/lib
-+
-+# End qt addition
-+<userinput>EOF
-+ldconfig</userinput></screen></para>
-+
-+<para>You need to set a QTDIR environment variable which can be accomplished
-+by putting the following in your ~/.bash_profile and/or ~/.bashrc:
-+<screen><userinput>export QTDIR=/opt/qt
-+export PATH=$PATH:$QTDIR/bin</userinput></screen></para>
-+
-+<para>You need to add the path for the qt man pages to the man.conf
-+file.  This can be done with the following command:</para>
-+
-+<para><screen><userinput>cat >> /etc/man.conf << "EOF"</userinput>
-+# Begin qt addition to man.conf
-+
-+MANPATH /opt/qt/doc/man
-+
-+# End qt addition to man.conf
-+<userinput>EOF</userinput></screen></para>
-+
-+</sect3>
-+
-+</sect2>
-+
-
-Index: x/wm/enlightenment/enlightenment.ent
-===================================================================
-
-Index: x/wm/enlightenment.xml
-===================================================================
-
-Index: x/wm/fluxbox/fluxbox.ent
-===================================================================
-
-Index: x/wm/fluxbox.xml
-===================================================================
-
-Index: x/wm/sawfish/sawfish.ent
-===================================================================
-
-Index: x/wm/sawfish.xml
-===================================================================
-
-Index: x/wm/wm.xml
-===================================================================
-
-Index: x/x.ent
-===================================================================
-
-Index: x/x.xml
-===================================================================
-+&x-lib;
-+&x-wm;
-+
-+</part>
-

Modified: trunk/blfs/traduc/commits/r46.txt
===================================================================
--- trunk/blfs/traduc/commits/r46.txt	2013-10-03 16:18:21 UTC (rev 4642)
+++ trunk/blfs/traduc/commits/r46.txt	2013-10-03 16:19:27 UTC (rev 4643)
@@ -0,0 +1,313 @@
+Révision 61
+
+fichiers ajoutés :
+   postlfs
+   README
+   xsoft/other/other.xml
+   xsoft/other
+   xsoft/xsoft.xml
+   xsoft/xsoft.ent
+   xsoft/office/abiword.xml
+   xsoft/office/abiword/abiword.ent
+   xsoft/office/abiword
+   xsoft/office/gnucash.xml
+   xsoft/office/gnucash/gnucash.ent
+   xsoft/office/gnucash
+   xsoft/office/gnumeric.xml
+   xsoft/office/gnumeric/gnumeric.ent
+   xsoft/office/gnumeric
+   xsoft/office/magicpoint.xml
+   xsoft/office/magicpoint/magicpoint.ent
+   xsoft/office/magicpoint
+   xsoft/office/office.xml
+   xsoft/office/gimp.xml
+   xsoft/office/gimp/gimp.ent
+   xsoft/office/gimp
+   xsoft/office
+   xsoft/suites/suites.xml
+   xsoft/suites/openoffice.xml
+   xsoft/suites/openoffice/openoffice.ent
+   xsoft/suites/openoffice
+   xsoft/suites/koffice.xml
+   xsoft/suites/koffice/koffice.ent
+   xsoft/suites/koffice
+   xsoft/suites
+   xsoft/graphweb/galeon.xml
+   xsoft/graphweb/galeon/galeon.ent
+   xsoft/graphweb/galeon
+   xsoft/graphweb/mozilla.xml
+   xsoft/graphweb/konq.xml
+   xsoft/graphweb/mozilla/mozilla.ent
+   xsoft/graphweb/mozilla
+   xsoft/graphweb/graphweb.xml
+   xsoft/graphweb
+   xsoft
+   kde/kde.xml
+   kde/add/add.xml
+   kde/add
+   kde/kde.ent
+   kde/kde-intro.xml
+   kde/inst/kde-addons.xml
+   kde/inst/kdevelop.xml
+   kde/inst/kdm.xml
+   kde/inst/kde-base.xml
+   kde/inst/kde-edu.xml
+   kde/inst/kdoc.xml
+   kde/inst/kde-sdk.xml
+   kde/inst/kde-pim.xml
+   kde/inst/kde-admin.xml
+   kde/inst/kde-artwork.xml
+   kde/inst/kde-libs.xml
+   kde/inst/kde-network.xml
+   kde/inst/kde-multimedia.xml
+   kde/inst/kde-games.xml
+   kde/inst/kde-bindings.xml
+   kde/inst/kde-toys.xml
+   kde/inst/objprelink.xml
+   kde/inst/kde-graphics.xml
+   kde/inst/kde-utils.xml
+   kde/inst
+   kde/other/other.xml
+   kde/other
+   kde
+   gnome/other/other.xml
+   gnome/other
+   gnome/gnome.xml
+   gnome/config/config.xml
+   gnome/config
+   gnome/lib/gdk-config.xml
+   gnome/lib/gdk-intro.xml
+   gnome/lib/gdk-inst.xml
+   gnome/lib/gdk-desc.xml
+   gnome/lib/gdk.xml
+   gnome/lib/lib.xml
+   gnome/lib
+   gnome/add/add.xml
+   gnome/add
+   gnome/gnome.ent
+   gnome
+   preface/whoread.xml
+   preface/preface.ent
+   preface/organtemp.xml
+   preface/organization.xml
+   preface/preface.xml
+   preface/foreword.xml
+   preface
+   server/server.ent
+   server/other/dhcp.xml
+   server/other/leafnode/leafnode.ent
+   server/other/leafnode
+   server/other/dhcp/dhcp-desc.xml
+   server/other/dhcp/dhcp-config.xml
+   server/other/dhcp/dhcp.ent
+   server/other/dhcp/dhcp-intro.xml
+   server/other/dhcp/dhcp-exp.xml
+   server/other/dhcp/dhcp-inst.xml
+   server/other/dhcp
+   server/other/openssh.xml
+   server/other/openssh/openssh.ent
+   server/other/openssh/openssh-intro.xml
+   server/other/openssh/openssh-exp.xml
+   server/other/openssh/openssh-inst.xml
+   server/other/openssh/openssh-desc.xml
+   server/other/openssh/openssh-config.xml
+   server/other/openssh
+   server/other/other.xml
+   server/other/cvsserver.xml
+   server/other/samba.xml
+   server/other/samba/samba.ent
+   server/other/samba
+   server/other/xinetd.xml
+   server/other/bind.xml
+   server/other/xinetd/xinetd.ent
+   server/other/xinetd
+   server/other/bind/bind.ent
+   server/other/bind
+   server/other/leafnode.xml
+   server/other
+   server/mail/courier.xml
+   server/mail/courier/courier.ent
+   server/mail/courier
+   server/mail/postfix.xml
+   server/mail/sendmail.xml
+   server/mail/postfix/postfix-inst.xml
+   server/mail/postfix/postfix-desc.xml
+   server/mail/postfix/postfix-config.xml
+   server/mail/postfix/postfix.ent
+   server/mail/postfix/postfix-intro.xml
+   server/mail/postfix
+   server/mail/sendmail/sendmail.ent
+   server/mail/sendmail
+   server/mail/exim.xml
+   server/mail/mail.xml
+   server/mail/exim/exim.ent
+   server/mail/exim
+   server/mail/qmail.xml
+   server/mail/qmail/qmail.ent
+   server/mail/qmail
+   server/mail/qpopper.xml
+   server/mail/qpopper/qpopper.ent
+   server/mail/qpopper
+   server/mail
+   server/server.xml
+   server
+   pst/printing/printing.xml
+   pst/printing
+   pst/pst.ent
+   pst/typesetting/typesetting.xml
+   pst/typesetting
+   pst/scanning/scanning.xml
+   pst/scanning
+   pst/pst.xml
+   pst
+   INSTALL
+   index.xml
+   x/x.ent
+   x/wm/enlightenment.xml
+   x/wm/enlightenment/enlightenment.ent
+   x/wm/enlightenment
+   x/wm/wm.xml
+   x/wm/sawfish.xml
+   x/wm/sawfish/sawfish.ent
+   x/wm/sawfish
+   x/wm/fluxbox.xml
+   x/wm/fluxbox/fluxbox.ent
+   x/wm/fluxbox
+   x/wm
+   x/installing/truetype.xml
+   x/installing/installing.xml
+   x/installing/xfree86.xml
+   x/installing/xfree86/xfree86-config.xml
+   x/installing/xfree86/xfree86.ent
+   x/installing/xfree86/xfree86-intro.xml
+   x/installing/xfree86/xfree86-exp.xml
+   x/installing/xfree86/xfree86-inst.xml
+   x/installing/xfree86/xfree86-desc.xml
+   x/installing/xfree86
+   x/installing/dri.xml
+   x/installing
+   x/lib/lesstif.xml
+   x/lib/lesstif/lesstif.ent
+   x/lib/lesstif
+   x/lib/atk.xml
+   x/lib/atk/atk.ent
+   x/lib/atk/atk-intro.xml
+   x/lib/atk/atk-inst.xml
+   x/lib/atk/atk-desc.xml
+   x/lib/atk/atk-config.xml
+   x/lib/atk
+   x/lib/gtk+.xml
+   x/lib/gtk+2.xml
+   x/lib/pango.xml
+   x/lib/qt.xml
+   x/lib/pango/pango-intro.xml
+   x/lib/pango/pango-inst.xml
+   x/lib/pango/pango-desc.xml
+   x/lib/pango/pango-config.xml
+   x/lib/pango/pango.ent
+   x/lib/pango
+   x/lib/qt/qt.ent
+   x/lib/qt/qt-intro.xml
+   x/lib/qt/qt-exp.xml
+   x/lib/qt/qt1-intro.xml
+   x/lib/qt/qt-inst.xml
+   x/lib/qt/qt-desc.xml
+   x/lib/qt/qt1-inst.xml
+   x/lib/qt/qt-config.xml
+   x/lib/qt
+   x/lib/gtk/gtk+2-desc.xml
+   x/lib/gtk/gtk+-config.xml
+   x/lib/gtk/gtk+2-config.xml
+   x/lib/gtk/gtk+-intro.xml
+   x/lib/gtk/gtk+-inst.xml
+   x/lib/gtk/gtk+2-intro.xml
+   x/lib/gtk/gtk.ent
+   x/lib/gtk/gtk+-desc.xml
+   x/lib/gtk/gtk+2-inst.xml
+   x/lib/gtk
+   x/lib/lib.xml
+   x/lib
+   x/x.xml
+   x
+   blfs.dsl
+   content/databases/db/db.ent
+   content/databases/db/db-intro.xml
+   content/databases/db/db-exp.xml
+   content/databases/db/db-inst.xml
+   content/databases/db/db-desc.xml
+   content/databases/db/db-config.xml
+   content/databases/db
+   content/databases/mysql/mysql.ent
+   content/databases/mysql
+   content/databases/databases.xml
+   content/databases/db.xml
+   content/databases/mysql.xml
+   content/databases
+   content/content.xml
+   content/web/web.xml
+   content/web/apache.xml
+   content/web/apache/apache.ent
+   content/web/apache
+   content/web/php.xml
+   content/web/php/php.ent
+   content/web/php
+   content/web
+   content/content.ent
+   content
+   appendices/appendices.ent
+   appendices/symlinks/rc0.xml
+   appendices/symlinks/rc1.xml
+   appendices/symlinks/rc2.xml
+   appendices/symlinks/rc3.xml
+   appendices/symlinks/rc4.xml
+   appendices/symlinks/rc5.xml
+   appendices/symlinks/symlinks.xml
+   appendices/symlinks/rc6.xml
+   appendices/symlinks
+   appendices/appendices.xml
+   appendices
+   template/template.xml
+   template/README
+   template/template-config.xml
+   template/template-intro.xml
+   template/template-exp.xml
+   template/template-inst.xml
+   template/template-desc.xml
+   template/newitem
+   template
+A       BOOK
+
+Log :
+house keeping for todays update
+
+Le robot a traité 10 % du commit anglais
+
+ATTENTION : il faut relire les fichiers suivants qui sont ajoutés
+Index: index.xml
+===================================================================
+--- index.xml	(révision 45)
++++ index.xml	(révision 46)
+@@ -2,8 +2,8 @@
+ <!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" 
+ 			"/usr/share/docbook/docbookx.dtd" [
+ 
+-<!ENTITY version "20020730">
+-<!ENTITY releasedate "July 30th, 2002">
+<!ENTITY version "20020731">
+<!ENTITY releasedate "July 31st, 2002">
+ 
+
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 45)
++++ introduction/welcome/changelog.xml	(révision 46)
+@@ -10,6 +10,9 @@
+ 
+ <itemizedlist>
+ 
++<listitem><para>July 31st, 2002 [larry]:  General Libraries: upgraded
++openssl to 0.9.6e.</para></listitem>
+ <listitem><para>July 30th, 2002 [larry]:  Multimedia: modified intro for
+ xmms for links.</para></listitem>
+ 
+




More information about the lfs-traducfr mailing list