[lfs-fr] r4609 - trunk/blfs/traduc/commits

myou72 at orange.fr myou72 at orange.fr
Jeu 3 Oct 08:46:30 PDT 2013


Author: myou72
Date: 2013-10-03 17:46:30 +0200 (Thu, 03 Oct 2013)
New Revision: 4609

Added:
   trunk/blfs/traduc/commits/r52.txt
Modified:
   trunk/blfs/traduc/commits/r10.txt
   trunk/blfs/traduc/commits/r29.txt
   trunk/blfs/traduc/commits/r30.txt
Log:
[BLFS-EN] r52.txt

Modified: trunk/blfs/traduc/commits/r10.txt
===================================================================
--- trunk/blfs/traduc/commits/r10.txt	2013-10-03 15:45:38 UTC (rev 4608)
+++ trunk/blfs/traduc/commits/r10.txt	2013-10-03 15:46:30 UTC (rev 4609)
@@ -1,135 +0,0 @@
-Révision 10
-
-fichiers modifiés :
-   multimedia/libdriv/libao/libao-intro.xml
-   multimedia/audioutils/vorbistools/vorbistools-intro.xml
-
-Log :
-update edguide to fit new book layout
-
-Le robot a traité 7 % du commit anglais
-Index: edguide/chapter04/checkfiles.xml
-===================================================================
---- edguide/chapter04/checkfiles.xml	(révision 9)
-+++ edguide/chapter04/checkfiles.xml	(révision 10)
-@@ -4,17 +4,16 @@
- 
- <para>If you are adding files, you need to have ran a <userinput>cvs
- add</userinput> command on each of them (something like <userinput>cvs
--add packages/m/mypackage*.xml</userinput> often does the trick.  A good
-+add mypackage*.xml</userinput> often does the trick.  A good
- trick if you've only added files (not taken any away) is to run a
- <userinput>cvs up</userinput> which will give an output something like
- this:
- <screen>mark:~/LFS/BLFS$ cvs up
- ? temp/thisfileneedstobeadded
- cvs server: Updating .
--cvs server: Updating appendixa
-+cvs server: Updating appendices
- [snip]
--cvs server: Updating packages/z
--cvs server: Updating parts
-+cvs server: Updating postlfs  
- cvs server: Updating preface
- cvs server: Updating temp
- A temp/thisfileadded
-
-Index: edguide/chapter04/commit.xml
-===================================================================
---- edguide/chapter04/commit.xml	(révision 9)
-+++ edguide/chapter04/commit.xml	(révision 10)
-@@ -22,8 +22,8 @@
- <userinput>cvs ci</userinput> command.  A good example of a commit
- command could be:
- <screen><userinput>cvs ci -m "add new package baldrick" index.xml \
--chapter01/changelog.xml chapter01/credits.xml \
--chapter17/chapter17.xml packages/b/baldrick*.xml</userinput></screen>
-+introduction/welcome/changelog.xml introduction/welcome/credits.xml \
-+postlfs/postlfs.xml postlfs/config/baldrick/baldrick*.xml</userinput></screen>
- If you have only made the changes regarding this package to your tree,
- then you can save time by simply running:
- <screen><userinput>cvs ci -m "add new package
-
-Index: edguide/chapter04/introduction.xml
-===================================================================
---- edguide/chapter04/introduction.xml	(révision 9)
-+++ edguide/chapter04/introduction.xml	(révision 10)
-@@ -8,11 +8,11 @@
- <itemizedlist>
- <listitem><para>Test the instructions you are adding</para></listitem>
- <listitem><para>Update <filename>index.xml</filename> with the new date
--and / or updated entities if necessary.</para></listitem>
-+and the files containing updated entities if necessary.</para></listitem>
- <listitem><para>Update
--<filename>chapter01/changelog.xml</filename></para></listitem>
-+<filename>introduction/welcome/changelog.xml</filename></para></listitem>
- <listitem><para>Update
--<filename>chapter01/credits.xml</filename></para></listitem>
-+<filename>introduction/welcome/credits.xml</filename></para></listitem>
- <listitem><para>Check that all relevant files have been <userinput>cvs
- add</userinput>'d or <userinput>remove</userinput>'d.</para></listitem>
- <listitem><para>Check that the book renders properly.</para></listitem>
-
-Index: edguide/chapter04/updatechangelog.xml
-===================================================================
---- edguide/chapter04/updatechangelog.xml	(révision 9)
-+++ edguide/chapter04/updatechangelog.xml	(révision 10)
-@@ -1,5 +1,5 @@
- <sect1 id="ch04-updatechangelog">
--<title>Update chapter01/changelog.xml</title>
-+<title>Update introduction/welcome/changelog.xml</title>
- <?dbhtml filename="updatechangelog.html" dir="chapter04"?>
- 
- <para>Changelog updates should <emphasis>always</emphasis> be provided
-
-Index: edguide/chapter04/updatecredits.xml
-===================================================================
---- edguide/chapter04/updatecredits.xml	(révision 9)
-+++ edguide/chapter04/updatecredits.xml	(révision 10)
-@@ -1,5 +1,5 @@
- <sect1 id="ch04-updatecredits">
--<title>Update chapter01/credits.xml</title>
-+<title>Update introduction/welcome/credits.xml</title>
- <?dbhtml filename="updatecredits.html" dir="chapter04"?>
- 
- <para>This file contains the list of who wrote what.  We should try and
-
-Index: edguide/chapter04/updateindex.xml
-===================================================================
---- edguide/chapter04/updateindex.xml	(révision 9)
-+++ edguide/chapter04/updateindex.xml	(révision 10)
-@@ -11,12 +11,10 @@
- the format YYYYMMDD.</para></sect2>
- 
- <sect2><title>Adding / updating entities</title>
--<para>Entities should be on one line (even if this requires wrapping
--because of the length).  Package entities should always be added in
--alphabetical order; if needed, create the <-- X --> divider (where
--X == any letter!).  Most letters probably have their dividers by now but some
--still don't.  We may soon divide <filename>index.xml</filename> into
--entity files (as of the time of writing, it's a tad under 30Kb which is
--too big for my liking).</para></sect2>
-+<para>Package entities are now stored in individual
-+<filename>.ent</filename> files throughout the BLFS CVS tree.  You need
-+to find the relevant ones and update them.  Entities should be on one line 
-+(even if this requires wrapping because of the length).</para>
-+</sect2>
- 
- </sect1>
-
-Index: edguide/index.xml
-===================================================================
---- edguide/index.xml	(révision 9)
-+++ edguide/index.xml	(révision 10)
-@@ -5,8 +5,8 @@
- 
- <!ENTITY book SYSTEM "book/book.xml">
- 
--<!ENTITY version "20020607">
--<!ENTITY releasedate "June 7th, 2002">
-+<!ENTITY version "20020707">
-+<!ENTITY releasedate "July 7th, 2002">
- 
- <!ENTITY blfs-bugzilla "http://blfs-bugs.linuxfromscratch.org">
- 
-

Modified: trunk/blfs/traduc/commits/r29.txt
===================================================================
--- trunk/blfs/traduc/commits/r29.txt	2013-10-03 15:45:38 UTC (rev 4608)
+++ trunk/blfs/traduc/commits/r29.txt	2013-10-03 15:46:30 UTC (rev 4609)
@@ -1,35 +1 @@
-Révision 29
-
-fichiers modifiés :
-   postlfs/shells/tcsh.xml
-   postlfs/shells/tcsh/tcsh.ent
-
-Log :
-final tcsh fixes
-
-Le robot a traité 0 % du commit anglais
-Index: postlfs/shells/tcsh/tcsh.ent
-===================================================================
---- postlfs/shells/tcsh/tcsh.ent	(révision 28)
-+++ postlfs/shells/tcsh/tcsh.ent	(révision 29)
-@@ -4,7 +4,7 @@
- <!ENTITY tcsh-exp SYSTEM "tcsh-exp.xml">
- <!ENTITY tcsh-desc SYSTEM "tcsh-desc.xml">
- <!ENTITY tcsh-config SYSTEM "tcsh-config.xml">
--<!ENTITY tcsh-buildsize "">
-+<!ENTITY tcsh-buildsize "5.3 MB">
- <!ENTITY tcsh-version "6.11">
- <!ENTITY tcsh-download-http "http://c0ke.kaizo.org/mirror/tcsh/tcsh-6.11.tar.gz">
- <!ENTITY tcsh-download-ftp "ftp://ftp.funet.fi/pub/unix/shells/tcsh/tcsh-6.11.tar.gz">
-
-Index: postlfs/shells/tcsh.xml
-===================================================================
---- postlfs/shells/tcsh.xml	(révision 28)
-+++ postlfs/shells/tcsh.xml	(révision 29)
-@@ -1,4 +1,5 @@
- <sect1 id="tcsh" xreflabel="tcsh-&tcsh-version;">
-+<?dbhtml filename="tcsh.html" dir="postlfs"?>
- <title>tcsh-&tcsh-version;</title>
- 
- &tcsh-intro;
-
+R
\ No newline at end of file

Modified: trunk/blfs/traduc/commits/r30.txt
===================================================================
--- trunk/blfs/traduc/commits/r30.txt	2013-10-03 15:45:38 UTC (rev 4608)
+++ trunk/blfs/traduc/commits/r30.txt	2013-10-03 15:46:30 UTC (rev 4609)
@@ -1,49 +0,0 @@
-Révision 30
-
-fichiers modifiés :
-   postlfs/shells/tcsh/tcsh-exp.xml
-   postlfs/shells/tcsh/tcsh-inst.xml
-
-Log :
-I'll read the FHS before quoting it in future
-
-Le robot a traité 2 % du commit anglais
-Index: postlfs/shells/tcsh/tcsh-exp.xml
-===================================================================
---- postlfs/shells/tcsh/tcsh-exp.xml	(révision 29)
-+++ postlfs/shells/tcsh/tcsh-exp.xml	(révision 30)
-@@ -1,14 +1,11 @@
- <sect2>
- <title>Command explanations</title>
- 
--<para><userinput>./configure --prefix= :</userinput> We do this because
--shells should be installed in the /bin directory, not /usr/bin.</para>
- <para><userinput>cp tcsh.man /usr/share/man/man1/tcsh.1
- :</userinput>tcsh doesn't install its man-page correctly, so we do it
- manually.</para>
- 
--<para><userinput>ln -s tcsh /bin/csh :</userinput> The FHS states that
-+<para><userinput>ln -s /usr/bin/tcsh /bin/csh :</userinput> The FHS states that
- if there is a C shell installed, there should be a symlink from
- <filename>/bin/csh</filename> to it.  This creates that symlink.</para>
- 
-
-Index: postlfs/shells/tcsh/tcsh-inst.xml
-===================================================================
---- postlfs/shells/tcsh/tcsh-inst.xml	(révision 29)
-+++ postlfs/shells/tcsh/tcsh-inst.xml	(révision 30)
-@@ -3,11 +3,11 @@
- 
- <para>Install tcsh by running the following commands:</para>
- 
--<para><screen><userinput>./configure --prefix= &&
-+<para><screen><userinput>./configure --prefix=/usr &&
- make &&
- make install &&
- cp tcsh.man /usr/share/man/man1/tcsh.1 &&
--ln -s tcsh /bin/csh</userinput></screen></para>
-+ln -s /usr/bin/tcsh /bin/csh</userinput></screen></para>
- 
- </sect2>
- 
-

Added: trunk/blfs/traduc/commits/r52.txt
===================================================================
--- trunk/blfs/traduc/commits/r52.txt	                        (rev 0)
+++ trunk/blfs/traduc/commits/r52.txt	2013-10-03 15:46:30 UTC (rev 4609)
@@ -0,0 +1,178 @@
+Révision 29
+
+fichiers modifiés :
+   postlfs/shells/tcsh.xml
+   postlfs/shells/tcsh/tcsh.ent
+
+Log :
+ent updates to System Utilities
+
+Le robot a traité 0 % du commit anglais
+Index: general/sysutils/fcron/fcron.ent
+===================================================================
+--- general/sysutils/fcron/fcron.ent	(révision 51)
++++ general/sysutils/fcron/fcron.ent	(révision 52)
+@@ -6,5 +6,6 @@
+ <!ENTITY fcron-config SYSTEM "fcron-config.xml">
+ <!ENTITY fcron-buildsize "2.3 MB">
+ <!ENTITY fcron-version "2.9.0">
+-<!ENTITY fcron-download "http://fcron.free.fr/fcron-2.9.0.src.tar.gz">
++<!ENTITY fcron-download-http "http://fcron.free.fr/fcron-2.9.0.src.tar.gz">
++<!ENTITY fcron-download-ftp "">
+ <!ENTITY fcron-size "324 KB">
+
+Index: general/sysutils/fcron/fcron-intro.xml
+===================================================================
+--- general/sysutils/fcron/fcron-intro.xml	(révision 51)
++++ general/sysutils/fcron/fcron-intro.xml	(révision 52)
+@@ -1,7 +1,8 @@
+ <sect2>
+ <title>Introduction to fcron</title>
+ 
+-<screen>Download location:              <ulink url="&fcron-download;"/>
++<screen>Download location (HTTP):       <ulink url="&fcron-download-http;"/>
++Download location (FTP):        <ulink url="&fcron-download-ftp;"/>
+ Version used:                   &fcron-version;
+ Package size:                   &fcron-size;
+ Estimated Disk space required:  &fcron-buildsize;</screen>
+@@ -10,9 +11,9 @@
+ is a periodical command scheduler which aims at replacing Vixie
+ Cron." </para>
+ 
+-<screen>fcron requires a running syslog (part of the base LFS system).
+-fcron recommends a local mail system (sendmail or <xref
+-linkend="postfix"></xref>, for example).
+-fcron will utilize PAM if it is installed prior to fcron.</screen>
++<screen>fcron recommends:
++local mail system (sendmail or <xref linkend="postfix"></xref>, for example).
++fcron utilizes:
++PAM if it is installed prior to fcron.</screen>
+ 
+ </sect2>
+
+Index: general/sysutils/gpm/gpm.ent
+===================================================================
+--- general/sysutils/gpm/gpm.ent	(révision 51)
++++ general/sysutils/gpm/gpm.ent	(révision 52)
+@@ -5,5 +5,6 @@
+ <!ENTITY gpm-config SYSTEM "gpm-config.xml">
+ <!ENTITY gpm-buildsize "3.2 MB">
+ <!ENTITY gpm-version "1.20.0">
+-<!ENTITY gpm-download "ftp://arcana.linux.it/pub/gpm/gpm-1.20.0.tar.bz2">
++<!ENTITY gpm-download-http "">
++<!ENTITY gpm-download-ftp "ftp://arcana.linux.it/pub/gpm/gpm-1.20.0.tar.bz2">
+ <!ENTITY gpm-size "382 KB">
+
+Index: general/sysutils/gpm/gpm-intro.xml
+===================================================================
+--- general/sysutils/gpm/gpm-intro.xml	(révision 51)
++++ general/sysutils/gpm/gpm-intro.xml	(révision 52)
+@@ -1,7 +1,8 @@
+ <sect2>
+ <title>Introduction to gpm</title>
+ 
+-<screen>Download location:              &gpm-download;
++<screen>Download location (HTTP):       <ulink url="&gpm-download-http;"/>
++Download location (FTP):        <ulink url="&gpm-download-ftp;"/>
+ Version used:                   &gpm-version;
+ Package size:                   &gpm-size;
+ Estimated Disk space required:  &gpm-buildsize;</screen>
+
+Index: general/sysutils/hdparm/hdparm.ent
+===================================================================
+--- general/sysutils/hdparm/hdparm.ent	(révision 51)
++++ general/sysutils/hdparm/hdparm.ent	(révision 52)
+@@ -4,5 +4,6 @@
+ <!ENTITY hdparm-desc SYSTEM "hdparm-desc.xml">
+ <!ENTITY hdparm-buildsize "257 KB">
+ <!ENTITY hdparm-version "5.2">
++<!ENTITY hdparm-download-http "">
++<!ENTITY hdparm-download-ftp "ftp://ftp.ibiblio.org/pub/Linux/system/hardware/hdparm-5.2.tar.gz">
+ <!ENTITY hdparm-size "36 KB">
+
+Index: general/sysutils/hdparm/hdparm-intro.xml
+===================================================================
+--- general/sysutils/hdparm/hdparm-intro.xml	(révision 51)
++++ general/sysutils/hdparm/hdparm-intro.xml	(révision 52)
+@@ -1,7 +1,8 @@
+ <sect2>
+ <title>Introduction to hdparm</title>
+ 
+-<screen>Download location:              &hdparm-download;
++<screen>Download location (HTTP):       <ulink url="&hdparm-download-http;"/>
++Download location (FTP):        <ulink url="&hdparm-download-ftp;"/>
+ Version used:                   &hdparm-version;
+ Package size:                   &hdparm-size;
+ Estimated Disk space required:  &hdparm-buildsize;</screen>
+
+Index: general/sysutils/pkgconfig/pkgconfig.ent
+===================================================================
+--- general/sysutils/pkgconfig/pkgconfig.ent	(révision 51)
++++ general/sysutils/pkgconfig/pkgconfig.ent	(révision 52)
+@@ -4,5 +4,6 @@
+ <!ENTITY pkgconfig-desc SYSTEM "pkgconfig-desc.xml">
+ <!ENTITY pkgconfig-buildsize "5 MB">
+ <!ENTITY pkgconfig-version "0.12.0">
+-<!ENTITY pkgconfig-download "http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-0.12.0.tar.gz">
++<!ENTITY pkgconfig-download-http "http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-0.12.0.tar.gz">
++<!ENTITY pkgconfig-download-ftp "">
+ <!ENTITY pkgconfig-size "596 KB">
+
+Index: general/sysutils/pkgconfig/pkgconfig-intro.xml
+===================================================================
+--- general/sysutils/pkgconfig/pkgconfig-intro.xml	(révision 51)
++++ general/sysutils/pkgconfig/pkgconfig-intro.xml	(révision 52)
+@@ -1,7 +1,8 @@
+ <sect2>
+ <title>Introduction to pkgconfig</title>
+ 
+-<screen>Download location:              <ulink url="&pkgconfig-download;"/>
++<screen>Download location (HTTP):       <ulink url="&pkgconfig-download-http;"/>
++Download location (FTP):        <ulink url="&pkgconfig-download-ftp;"/>
+ Version used:                   &pkgconfig-version;
+ Package size:                   &pkgconfig-size;
+ Estimated Disk space required:  &pkgconfig-buildsize;</screen>
+
+Index: general/sysutils/which/which.ent
+===================================================================
+--- general/sysutils/which/which.ent	(révision 51)
++++ general/sysutils/which/which.ent	(révision 52)
+@@ -4,5 +4,6 @@
+ <!ENTITY which-desc SYSTEM "which-desc.xml">
+ <!ENTITY which-buildsize "667 KB">
+ <!ENTITY which-version "2.13">
+-<!ENTITY which-download "ftp://ftp.gnu.org/pub/gnu/which/which-2.13.tar.gz">
++<!ENTITY which-download-http "">
++<!ENTITY which-download-ftp "ftp://ftp.gnu.org/pub/gnu/which/which-2.13.tar.gz">
+ <!ENTITY which-size "104 KB">
+
+Index: general/sysutils/which/which-intro.xml
+===================================================================
+--- general/sysutils/which/which-intro.xml	(révision 51)
++++ general/sysutils/which/which-intro.xml	(révision 52)
+@@ -1,7 +1,8 @@
+ <sect2>
+ <title>Introduction to which</title>
+ 
+-<screen>Download location:              &which-download;
++<screen>Download location (HTTP):       <ulink url="&which-download-http;"/>
++Download location (FTP):        <ulink url="&which-download-ftp;"/>
+ Version used:                   &which-version;
+ Package size:                   &which-size;
+ Estimated Disk space required:  &which-buildsize;</screen>
+
+Index: introduction/welcome/changelog.xml
+===================================================================
+--- introduction/welcome/changelog.xml	(révision 51)
++++ introduction/welcome/changelog.xml	(révision 52)
+@@ -11,7 +11,8 @@
+ <itemizedlist>
+ 
+ <listitem><para>August 3rd, 2002 [larry]: Graphics Libraries: update ent
+-and intro files to new format.</para></listitem>
++and intro files to new format. System Utilities: update ent and intro
++files to new format.</para></listitem>
+ 
+ <listitem><para>August 2nd, 2002 [larry]:  Basic Net: added wget-1.8.2,
+ procmail-3.22.  Removed chmod 755 from OpenSSH. Modified Imlib for
+




More information about the lfs-traducfr mailing list