[lfs-fr] [BLFS-EN] r10169

Robot myou72 at orange.fr
Ven 11 Mai 06:32:54 PDT 2012


Révision 10169

fichiers modifiés :
   introduction/welcome/changelog.xml
   multimedia/libdriv/libdvdcss.xml
   general.ent
   TODO
   general/sysutils/sg3_utils.xml
   general/genlib/libidn.xml

Log :
libidn 1.24, sg3_utils 1.33 and libdvdcss 1.2.12

Le robot a traité 0 % du commit anglais.

Index: TODO
===================================================================
--- TODO	(revision 10168)
+++ TODO	(revision 10169)
@@ -2,10 +2,7 @@
 
   * Upgrade:
 
-  * libdvdcss-1.2.12
-  * libidn-1.24
   * lzo-2.06 (Low priority)
-  * sg3_utils-1.33
   * tcl-8.5.11
   * tk-8.5.11
 

Index: general.ent
===================================================================
--- general.ent	(revision 10168)
+++ general.ent	(revision 10169)
@@ -199,7 +199,7 @@
 {!ENTITY icu-version                  "49.1.1"}
 {!ENTITY iso-codes-version            "3.30"}
 {!ENTITY gmime-version                "2.4.32"}
-{!ENTITY libidn-version               "1.22"}
+{!ENTITY libidn-version               "1.24"}
 {!ENTITY libatomic_ops-version        "1.2"}
 {!ENTITY libdrm-version               "2.4.33"}
 {!-- {!ENTITY dbus-qt3-version             "0.62"} --}
@@ -332,7 +332,7 @@
 {!-- {!ENTITY hal-version                  "0.5.14"} --}
 {!ENTITY udev-version                 "Installed LFS Version"}
 {!ENTITY upower-version               "0.9.16"}
-{!ENTITY sg3_utils-version            "1.29"}
+{!ENTITY sg3_utils-version            "1.33"}
 {!ENTITY parted-version               "3.1"}
 {!ENTITY udisks-version               "1.0.4"}
 {!ENTITY udisks2-version              "1.96.0"}
@@ -982,7 +982,7 @@
 {!ENTITY libao-version                "1.1.0"}
 {!ENTITY libcanberra-version          "0.28"}
 {!ENTITY libdiscid-version            "0.2.2"}
-{!ENTITY libdvdcss-version            "1.2.11"}
+{!ENTITY libdvdcss-version            "1.2.12"}
 {!ENTITY libdvdread-version           "4.2.0"}
 {!ENTITY libdvdnav-version            "4.2.0"}
 {!ENTITY libdv-version                "1.0.0"}

Index: general/genlib/libidn.xml
===================================================================
--- general/genlib/libidn.xml	(revision 10168)
+++ general/genlib/libidn.xml	(revision 10169)
@@ -6,7 +6,7 @@
 
   {!ENTITY libidn-download-http "http://ftp.gnu.org/gnu/libidn/libidn-&libidn-version;.tar.gz"}
   {!ENTITY libidn-download-ftp  "ftp://ftp.gnu.org/gnu/libidn/libidn-&libidn-version;.tar.gz"}
-  {!ENTITY libidn-md5sum        "893a1df0cf3b28b72d248382eaeaca71"}
+  {!ENTITY libidn-md5sum        "764d7258eeb273941680499fab2c7367"}
   {!ENTITY libidn-size          "3.2 MB"}
   {!ENTITY libidn-buildsize     "28 MB"}
   {!ENTITY libidn-time          "0.3 SBU"}
@@ -20,32 +20,30 @@
     {date}$Date${/date}
   {/sect1info}
 
-  {title}Libidn-&libidn-version;{/title}
+  {title}libidn-&libidn-version;{/title}
 
   {indexterm zone="libidn"}
-    {primary sortas="a-Libidn"}Libidn{/primary}
+    {primary sortas="a-libidn"}libidn{/primary}
   {/indexterm}
 
   {sect2 role="package"}
-    {title}Introduction to Libidn{/title}
+    {title}Introduction to libidn{/title}
 
-    {para}{application}Libidn{/application} is a package designed for
-    internationalized string handling based on the {ulink
-    url="http://josefsson.org/cgi-bin/rfcmarkup?url=http://www.ietf.org/rfc/rfc3454.txt"}
-    Stringprep{/ulink}, {ulink
-    url="http://josefsson.org/cgi-bin/rfcmarkup?url=http://www.ietf.org/rfc/rfc3492.txt"}
-    Punycode{/ulink}, {ulink
-    url="http://josefsson.org/cgi-bin/rfcmarkup?url=http://www.ietf.org/rfc/rfc3490.txt"}
-    IDNA{/ulink} and {ulink
-    url="http://josefsson.org/cgi-bin/rfcmarkup?url=http://josefsson.org/cgi-bin/viewcvs.cgi/*checkout*/libidn/doc/specifications/draft-hoffman-idn-reg-02.txt"}
-    TLD{/ulink} specifications defined by the Internet Engineering Task Force
-    (IETF) Internationalized Domain Names (IDN) working group, used for
-    internationalized domain names. This is useful for converting data from the
-    system's native representation into UTF-8, transforming Unicode strings
-    into ASCII strings, allowing applications to use certain ASCII name labels
-    (beginning with a special prefix) to represent non-ASCII name labels, and
-    converting entire domain names to and from the ASCII Compatible Encoding
-    (ACE) form.{/para}
+    {para}
+      {application}libidn{/application} is a package designed for
+      internationalized string handling based on the 
+      {ulink url="http://www.ietf.org/rfc/rfc3454.txt"}Stringprep{/ulink},
+      {ulink url="http://www.ietf.org/rfc/rfc3492.txt"}Punycode{/ulink} and
+      {ulink url="http://www.ietf.org/rfc/rfc3490.txt"}IDNA{/ulink}
+      specifications defined by the Internet Engineering Task Force
+      (IETF) Internationalized Domain Names (IDN) working group, used for
+      internationalized domain names. This is useful for converting data from the
+      system's native representation into UTF-8, transforming Unicode strings
+      into ASCII strings, allowing applications to use certain ASCII name labels
+      (beginning with a special prefix) to represent non-ASCII name labels, and
+      converting entire domain names to and from the ASCII Compatible Encoding
+      (ACE) form.
+    {/para}
 
     &lfs70_checked;
 
@@ -74,17 +72,13 @@
     {bridgehead renderas="sect3"}Libidn Dependencies{/bridgehead}
 
     {bridgehead renderas="sect4"}Optional{/bridgehead}
-    {para role="optional"}{xref linkend="emacs"/},
-    {!-- {xref linkend="pkgconfig"/}, --}
-    {xref linkend="gtk-doc"/},
-    a Java compiler—one of (looked for in this order)
-    {xref linkend="gcc"/} (for the {command}gcj{/command} program),
-    {ulink url="http://jikes.sourceforge.net/"}Jikes{/ulink},
-    {xref linkend="icedtea6"/},{!-- or {xref linkend="jdk"/},--}
-    and a C# compiler—{ulink
-    url="http://www.mono-project.com/Main_Page"}Mono{/ulink} or
-    {ulink url="http://www.southern-storm.com.au/portable_net.html"}
-    DotGNU Portable.NET{/ulink}{/para}
+    {para role="optional"}
+      {xref linkend="emacs"/},
+      {xref linkend="gtk-doc"/},
+      {xref linkend="icedtea6"/},
+      {ulink url="http://www.mono-project.com/Main_Page"}Mono{/ulink} and
+      {ulink url="http://valgrind.org/"}Valgrind{/ulink}
+    {/para}
 
     {para condition="html" role="usernotes"}User Notes:
     {ulink url="&blfs-wiki;/libidn"/}{/para}
@@ -92,46 +86,42 @@
   {/sect2}
 
   {sect2 role="installation"}
-    {title}Installation of Libidn{/title}
+    {title}Installation of libidn{/title}
 
-    {para}Install {application}Libidn{/application} by running the following
-    commands:{/para}
+    {para}
+      Install {application}libidn{/application} by running the following
+      commands:
+    {/para}
 
-{screen}{userinput}./configure --prefix=/usr &&
+{screen}{userinput}./configure --prefix=/usr --disable-static &&
 make{/userinput}{/screen}
 
-    {para}To test the results, issue: {command}make check{/command}.{/para}
+    {para}
+      To test the results, issue: {command}make check{/command}.
+    {/para}
 
-    {para}Now, as the {systemitem class="username"}root{/systemitem} user:{/para}
+    {para}
+      Now, as the {systemitem class="username"}root{/systemitem} user:
+    {/para}
 
 {screen role="root"}{userinput}make install &&
-find doc -name "Makefile*" -exec rm {} \; &&
 
-install -v -m755 -d \
-    /usr/share/doc/libidn-&libidn-version;/{api,java,specifications,tld} &&
-install -v -m644 doc/components* \
-                 doc/libidn.{pdf,ps,html} \
-    /usr/share/doc/libidn-&libidn-version; &&
-install -v -m644 doc/reference/html/* \
-    /usr/share/doc/libidn-&libidn-version;/api &&
-install -v -m644 doc/specifications/* \
-    /usr/share/doc/libidn-&libidn-version;/specifications &&
-install -v -m644 doc/tld/* /usr/share/doc/libidn-&libidn-version;/tld &&
-cp -v -R doc/java/* /usr/share/doc/libidn-&libidn-version;/java{/userinput}{/screen}
+find doc -name "Makefile*" -delete &&
+rm -rf -v doc/{gdoc,idn.1,stamp-vti,man,texi} &&
+mkdir -v /usr/share/doc/libidn-&libidn-version; &&
+cp -r -v doc/* /usr/share/doc/libidn-&libidn-version;{/userinput}{/screen}
 
-    {!-- {para}If you created the text documentation, install it using the following
-    command as the {systemitem class="username"}root{/systemitem} user:{/para}
-
-{screen role="root"}{userinput}install -v -m644 doc/libidn.txt /usr/share/doc/libidn-&libidn-version;{/userinput}{/screen} --}
-
   {/sect2}
 
   {sect2 role="commands"}
     {title}Command Explanations{/title}
 
     {xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
-    href="../../xincludes/gtk-doc-rebuild.xml"/}
+      href="../../xincludes/static-libraries.xml"/}
 
+    {xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+      href="../../xincludes/gtk-doc-rebuild.xml"/}
+
   {/sect2}
 
   {sect2 role="content"}
@@ -139,13 +129,20 @@
 
     {segmentedlist}
       {segtitle}Installed Program{/segtitle}
-      {segtitle}Installed Libraries{/segtitle}
-      {segtitle}Installed Directory{/segtitle}
+      {segtitle}Installed Library{/segtitle}
+      {segtitle}Installed Directories{/segtitle}
 
       {seglistitem}
-        {seg}idn{/seg}
-        {seg}libidn.{so,a} and optionally, Java and C# modules{/seg}
-        {seg}/usr/share/doc/libidn-&libidn-version;{/seg}
+        {seg}
+          idn
+        {/seg}
+        {seg}
+          libidn.so
+        {/seg}
+        {seg}
+          /usr/share/doc/libidn-&libidn-version; and
+          /usr/share/gtk-doc/html/libidn
+        {/seg}
       {/seglistitem}
     {/segmentedlist}
 
@@ -157,8 +154,10 @@
       {varlistentry id="idn"}
         {term}{command}idn{/command}{/term}
         {listitem}
-          {para}is a command line interface to the internationalized domain
-          name library.{/para}
+          {para}
+            is a command line interface to the internationalized domain
+            name library.
+          {/para}
           {indexterm zone="libidn idn"}
             {primary sortas="b-idn"}idn{/primary}
           {/indexterm}
@@ -166,18 +165,20 @@
       {/varlistentry}
 
       {varlistentry id="libidn-lib"}
-        {term}{filename class='libraryfile'}libidn.{so,a}{/filename}{/term}
+        {term}{filename class='libraryfile'}libidn.so{/filename}{/term}
         {listitem}
-          {para} contains a generic Stringprep implementation that does Unicode
-          3.2 NFKC normalization, mapping and prohibition of characters, and
-          bidirectional character handling. Profiles for Nameprep, iSCSI, SASL
-          and XMPP are included as well as support for Punycode and ASCII
-          Compatible Encoding (ACE) via IDNA. A mechanism to define Top-Level
-          Domain (TLD) specific validation tables, and to compare strings
-          against those tables, as well as default tables for some TLDs are
-          included.{/para}
+          {para}
+            contains a generic Stringprep implementation that does Unicode
+            3.2 NFKC normalization, mapping and prohibition of characters, and
+            bidirectional character handling. Profiles for Nameprep, iSCSI, SASL
+            and XMPP are included as well as support for Punycode and ASCII
+            Compatible Encoding (ACE) via IDNA. A mechanism to define Top-Level
+            Domain (TLD) specific validation tables, and to compare strings
+            against those tables, as well as default tables for some TLDs are
+            included.
+          {/para}
           {indexterm zone="libidn libidn-lib"}
-            {primary sortas="c-libidn"}libidn.{so,a}{/primary}
+            {primary sortas="c-libidn"}libidn.so{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}

Index: general/sysutils/sg3_utils.xml
===================================================================
--- general/sysutils/sg3_utils.xml	(revision 10168)
+++ general/sysutils/sg3_utils.xml	(revision 10169)
@@ -4,12 +4,12 @@
   {!ENTITY % general-entities SYSTEM "../../general.ent"}
   %general-entities;
 
-  {!ENTITY sg3_utils-download-http "http://sg.danny.cz/sg/p/sg3_utils-&sg3_utils-version;.tgz"}
+  {!ENTITY sg3_utils-download-http "http://sg.danny.cz/sg/p/sg3_utils-&sg3_utils-version;.tar.xz"}
   {!ENTITY sg3_utils-download-ftp  " "}
-  {!ENTITY sg3_utils-md5sum        "17b8f2bc1b32bd036515683cc87328ea"}
-  {!ENTITY sg3_utils-size          "881 KB"}
-  {!ENTITY sg3_utils-buildsize     "10 MB"}
-  {!ENTITY sg3_utils-time          "0.3 SBU"}
+  {!ENTITY sg3_utils-md5sum        "41720d196a981185a1625e01aaf1ca84"}
+  {!ENTITY sg3_utils-size          "604 KB"}
+  {!ENTITY sg3_utils-buildsize     "14 MB"}
+  {!ENTITY sg3_utils-time          "0.4 SBU"}
 ]}
 
 {sect1 id="sg3_utils" xreflabel="sg3_utils-&sg3_utils-version;"}
@@ -29,34 +29,48 @@
   {sect2 role="package"}
     {title}Introduction to sg3_utils{/title}
 
-    {para}The {application}sg3_utils{/application} package contains low level
-    utilities for devices that use a SCSI command set. Apart from SCSI parallel
-    interface (SPI) devices, the SCSI command set is used by ATAPI devices
-    (CD/DVDs and tapes), USB mass storage devices, Fibre Channel disks, IEEE
-    1394 storage devices (that use the "SBP" protocol), SAS, iSCSI and FCoE
-    devices (amongst others).{/para}
+    {para}
+      The {application}sg3_utils{/application} package contains low level
+      utilities for devices that use a SCSI command set. Apart from SCSI parallel
+      interface (SPI) devices, the SCSI command set is used by ATAPI devices
+      (CD/DVDs and tapes), USB mass storage devices, Fibre Channel disks, IEEE
+      1394 storage devices (that use the "SBP" protocol), SAS, iSCSI and FCoE
+      devices (amongst others).
+    {/para}
 
-    &lfs70_built;
+    &lfs70_checked;
 
     {bridgehead renderas="sect3"}Package Information{/bridgehead}
     {itemizedlist spacing="compact"}
       {listitem}
-        {para}Download (HTTP): {ulink url="&sg3_utils-download-http;"/}{/para}
+        {para}
+          Download (HTTP): {ulink url="&sg3_utils-download-http;"/}
+        {/para}
       {/listitem}
       {listitem}
-        {para}Download (FTP): {ulink url="&sg3_utils-download-ftp;"/}{/para}
+        {para}
+          Download (FTP): {ulink url="&sg3_utils-download-ftp;"/}
+        {/para}
       {/listitem}
       {listitem}
-        {para}Download MD5 sum: &sg3_utils-md5sum;{/para}
+        {para}
+          Download MD5 sum: &sg3_utils-md5sum;
+        {/para}
       {/listitem}
       {listitem}
-        {para}Download size: &sg3_utils-size;{/para}
+        {para}
+          Download size: &sg3_utils-size;
+        {/para}
       {/listitem}
       {listitem}
-        {para}Estimated disk space required: &sg3_utils-buildsize;{/para}
+        {para}
+          Estimated disk space required: &sg3_utils-buildsize;
+        {/para}
       {/listitem}
       {listitem}
-        {para}Estimated build time: &sg3_utils-time;{/para}
+        {para}
+          Estimated build time: &sg3_utils-time;
+        {/para}
       {/listitem}
     {/itemizedlist}
 
@@ -68,15 +82,21 @@
   {sect2 role="installation"}
     {title}Installation of sg3_utils{/title}
 
-    {para}Install {application}sg3_utils{/application} by running the following
-    commands:{/para}
+    {para}
+      Install {application}sg3_utils{/application} by running the following
+      commands:
+    {/para}
 
-{screen}{userinput}./configure --prefix=/usr &&
+{screen}{userinput}./configure --prefix=/usr --disable-static &&
 make{/userinput}{/screen}
 
-    {para}This package does not come with a test suite.{/para}
+    {para}
+      This package does not come with a test suite.
+    {/para}
 
-    {para}Now, as the {systemitem class="username"}root{/systemitem} user:{/para}
+    {para}
+      Now, as the {systemitem class="username"}root{/systemitem} user:
+    {/para}
 
 {screen role="root"}{userinput}make install{/userinput}{/screen}
 
@@ -85,8 +105,8 @@
   {sect2 role="commands"}
     {title}Command Explanations{/title}
 
-    {para}{option}--enable-static=no{/option}: This switch prevents the static
-    libraries being installed.{/para}
+    {xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+      href="../../xincludes/static-libraries.xml"/}
 
   {/sect2}
 
@@ -96,20 +116,22 @@
     {segmentedlist}
       {segtitle}Installed Programs{/segtitle}
       {segtitle}Installed Library{/segtitle}
-      {segtitle}Installed Directories{/segtitle}
 
       {seglistitem}
-        {seg}sg_dd, sg_emc_trespass, sg_format, sg_get_config,
-        sg_get_lba_status, sg_ident, sginfo, sg_inq, sg_logs, sg_luns, sg_map,
-        sg_map26, sgm_dd, sg_modes, sg_opcodes, sgp_dd, sg_persist, sg_prevent,
-        sg_raw, sg_rbuf, sg_rdac, sg_read, sg_read_block_limits, sg_read_buffer,
-        sg_readcap, sg_read_long, sg_reassign, sg_requests, sg_reset, sg_rmsn,
-        sg_rtpg, sg_safte, sg_sat_identify, sg_sat_phy_event,
-        sg_sat_set_features, sg_scan, sg_senddiag, sg_ses, sg_start, sg_stpg,
-        sg_sync, sg_test_rwbuf, sg_turs, sg_unmap, sg_verify, sg_vpd,
-        sg_write_buffer, sg_write_long, sg_write_same, and sg_wr_mode{/seg}
-        {seg}libsgutils2.{so,a}{/seg}
-        {seg}None{/seg}
+        {seg}
+          sg_dd, sg_decode_sense, sg_emc_trespass, sg_format, sg_get_config,
+          sg_get_lba_status, sg_ident, sginfo, sg_inq, sg_logs, sg_luns, sg_map,
+          sg_map26, sgm_dd, sg_modes, sg_opcodes, sgp_dd, sg_persist, sg_prevent,
+          sg_raw, sg_rbuf, sg_rdac, sg_read, sg_read_block_limits, sg_read_buffer,
+          sg_readcap, sg_read_long, sg_reassign, sg_referrals, sg_requests, sg_reset,
+          sg_rmsn, sg_rtpg, sg_safte, sg_sanitize, sg_sat_identify, sg_sat_phy_event,
+          sg_sat_set_features, sg_scan, sg_senddiag, sg_ses, sg_start, sg_stpg,
+          sg_sync, sg_test_rwbuf, sg_turs, sg_unmap, sg_verify, sg_vpd,
+          sg_write_buffer, sg_write_long, sg_write_same and sg_wr_mode
+        {/seg}
+        {seg}
+          libsgutils2.so
+        {/seg}
       {/seglistitem}
     {/segmentedlist}
 
@@ -121,19 +143,36 @@
       {varlistentry id="sg_dd"}
         {term}{command}sg_dd{/command}{/term}
         {listitem}
-          {para}copies data to and from files and devices. Specialised for
-          devices that understand the SCSI command set.{/para}
+          {para}
+            copies data to and from files and devices. Specialised for
+            devices that understand the SCSI command set.
+          {/para}
           {indexterm zone="sg3_utils sg_dd"}
             {primary sortas="b-sg_dd"}sg_dd{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}
 
+      {varlistentry id="sg_decode_sense"}
+        {term}{command}sg_decode_sense{/command}{/term}
+        {listitem}
+          {para}
+            takes SCSI sense data in binary or as a sequence
+            of ASCII hexadecimal bytes and decodes it.
+          {/para}
+          {indexterm zone="sg3_utils sg_decode_sense"}
+            {primary sortas="b-sg_decode_sense"}sg_decode_sense{/primary}
+          {/indexterm}
+        {/listitem}
+      {/varlistentry}
+
       {varlistentry id="sg_emc_trespass"}
         {term}{command}sg_emc_trespass{/command}{/term}
         {listitem}
-          {para}changes ownership of a LUN from another Service-Processor to
-          this one.{/para}
+          {para}
+            changes ownership of a LUN from another Service-Processor to
+            this one.
+          {/para}
           {indexterm zone="sg3_utils sg_emc_trespass"}
             {primary sortas="b-sg_emc_trespass"}sg_emc_trespass{/primary}
           {/indexterm}
@@ -143,8 +182,9 @@
       {varlistentry id="sg_format"}
         {term}{command}sg_format{/command}{/term}
         {listitem}
-          {para}format or resize a SCSI disk (perhaps change its block
-          size).{/para}
+          {para}
+            format or resize a SCSI disk (perhaps change its block size).
+          {/para}
           {indexterm zone="sg3_utils sg_format"}
             {primary sortas="b-sg_format"}sg_format{/primary}
           {/indexterm}
@@ -154,7 +194,9 @@
       {varlistentry id="sg_get_config"}
         {term}{command}sg_get_config{/command}{/term}
         {listitem}
-          {para}sends a SCSI GET CONFIGURATION command (MMC-4 +).{/para}
+          {para}
+            sends a SCSI GET CONFIGURATION command (MMC-4 +).
+          {/para}
           {indexterm zone="sg3_utils sg_get_config"}
             {primary sortas="b-sg_get_config"}sg_get_config{/primary}
           {/indexterm}
@@ -164,7 +206,9 @@
       {varlistentry id="sg_get_lba_status"}
         {term}{command}sg_get_lba_status{/command}{/term}
         {listitem}
-          {para}sends the SCSI GET LBA STATUS command.{/para}
+          {para}
+            sends the SCSI GET LBA STATUS command.
+          {/para}
           {indexterm zone="sg3_utils sg_get_lba_status"}
             {primary sortas="b-sg_get_lba_status"}sg_get_lba_status{/primary}
           {/indexterm}
@@ -174,8 +218,9 @@
       {varlistentry id="sg_ident"}
         {term}{command}sg_ident{/command}{/term}
         {listitem}
-          {para}sends a SCSI REPORT or SET IDENTIFYING INFORMATION
-          command.{/para}
+          {para}
+            sends a SCSI REPORT or SET IDENTIFYING INFORMATION command.
+          {/para}
           {indexterm zone="sg3_utils sg_ident"}
             {primary sortas="b-sg_ident"}sg_ident{/primary}
           {/indexterm}
@@ -185,7 +230,9 @@
       {varlistentry id="sginfo"}
         {term}{command}sginfo{/command}{/term}
         {listitem}
-          {para}access mode page information for a SCSI (or ATAPI) device.{/para}
+          {para}
+            access mode page information for a SCSI (or ATAPI) device.
+          {/para}
           {indexterm zone="sg3_utils sginfo"}
             {primary sortas="b-sginfo"}sginfo{/primary}
           {/indexterm}
@@ -195,8 +242,10 @@
       {varlistentry id="sg_inq"}
         {term}{command}sg_inq{/command}{/term}
         {listitem}
-          {para}sends a SCSI INQUIRY or ATA IDENTIFY (PACKET) DEVICE command and
-          outputs the response.{/para}
+          {para}
+            sends a SCSI INQUIRY or ATA IDENTIFY (PACKET) DEVICE command and
+            outputs the response.
+          {/para}
           {indexterm zone="sg3_utils sg_inq"}
             {primary sortas="b-sg_inq"}sg_inq{/primary}
           {/indexterm}
@@ -206,7 +255,9 @@
       {varlistentry id="sg_logs"}
         {term}{command}sg_logs{/command}{/term}
         {listitem}
-          {para}access log pages with SCSI LOG SENSE command.{/para}
+          {para}
+            access log pages with SCSI LOG SENSE command.
+          {/para}
           {indexterm zone="sg3_utils sg_logs"}
             {primary sortas="b-sg_logs"}sg_logs{/primary}
           {/indexterm}
@@ -216,7 +267,9 @@
       {varlistentry id="sg_luns"}
         {term}{command}sg_luns{/command}{/term}
         {listitem}
-          {para}sends the SCSI REPORT LUNS command.{/para}
+          {para}
+            sends the SCSI REPORT LUNS command.
+          {/para}
           {indexterm zone="sg3_utils sg_luns"}
             {primary sortas="b-sg_luns"}sg_luns{/primary}
           {/indexterm}
@@ -226,7 +279,9 @@
       {varlistentry id="sg_map"}
         {term}{command}sg_map{/command}{/term}
         {listitem}
-          {para}displays mapping between linux sg and other SCSI devices.{/para}
+          {para}
+            displays mapping between linux sg and other SCSI devices.
+          {/para}
           {indexterm zone="sg3_utils sg_map"}
             {primary sortas="b-sg_map"}sg_map{/primary}
           {/indexterm}
@@ -236,8 +291,9 @@
       {varlistentry id="sg_map26"}
         {term}{command}sg_map26{/command}{/term}
         {listitem}
-          {para}maps a special file to a SCSI generic (sg) device (or vice
-          versa).{/para}
+          {para}
+            maps a special file to a SCSI generic (sg) device (or vice versa).
+          {/para}
           {indexterm zone="sg3_utils sg_map26"}
             {primary sortas="b-sg_map26"}sg_map26{/primary}
           {/indexterm}
@@ -247,9 +303,11 @@
       {varlistentry id="sgm_dd"}
         {term}{command}sgm_dd{/command}{/term}
         {listitem}
-          {para}copies data to and from files and devices. Specialized for
-          devices that understand the SCSI command set and does memory mapped
-          transfers from sg devices.{/para}
+          {para}
+            copies data to and from files and devices. Specialized for
+            devices that understand the SCSI command set and does memory mapped
+            transfers from sg devices.
+          {/para}
           {indexterm zone="sg3_utils sgm_dd"}
             {primary sortas="b-sgm_dd"}sgm_dd{/primary}
           {/indexterm}
@@ -259,7 +317,9 @@
       {varlistentry id="sg_modes"}
         {term}{command}sg_modes{/command}{/term}
         {listitem}
-          {para}reads mode pages with SCSI MODE SENSE command.{/para}
+          {para}
+            reads mode pages with SCSI MODE SENSE command.
+          {/para}
           {indexterm zone="sg3_utils sg_modes"}
             {primary sortas="b-sg_modes"}sg_modes{/primary}
           {/indexterm}
@@ -269,8 +329,10 @@
       {varlistentry id="sg_opcodes"}
         {term}{command}sg_opcodes{/command}{/term}
         {listitem}
-          {para}reports information on supported SCSI commands or task
-          management functions.{/para}
+          {para}
+            reports information on supported SCSI commands or task
+            management functions.
+          {/para}
           {indexterm zone="sg3_utils sg_opcodes"}
             {primary sortas="b-sg_opcodes"}sg_opcodes{/primary}
           {/indexterm}
@@ -280,8 +342,10 @@
       {varlistentry id="sgp_dd"}
         {term}{command}sgp_dd{/command}{/term}
         {listitem}
-          {para}copies data to and from files and devices. Specialized for
-          devices that understand the SCSI command set.{/para}
+          {para}
+            copies data to and from files and devices. Specialized for
+            devices that understand the SCSI command set.
+          {/para}
           {indexterm zone="sg3_utils sgp_dd"}
             {primary sortas="b-sgp_dd"}sgp_dd{/primary}
           {/indexterm}
@@ -291,8 +355,10 @@
       {varlistentry id="sg_persist"}
         {term}{command}sg_persist{/command}{/term}
         {listitem}
-          {para}sends a SCSI PERSISTENT RESERVE (IN or OUT) command to
-          manipulate registrations and reservations.{/para}
+          {para}
+            sends a SCSI PERSISTENT RESERVE (IN or OUT) command to
+            manipulate registrations and reservations.
+          {/para}
           {indexterm zone="sg3_utils sg_persist"}
             {primary sortas="b-sg_persist"}sg_persist{/primary}
           {/indexterm}
@@ -302,7 +368,9 @@
       {varlistentry id="sg_prevent"}
         {term}{command}sg_prevent{/command}{/term}
         {listitem}
-          {para}sends a SCSI PREVENT ALLOW MEDIUM REMOVAL command.{/para}
+          {para}
+            sends a SCSI PREVENT ALLOW MEDIUM REMOVAL command.
+          {/para}
           {indexterm zone="sg3_utils sg_prevent"}
             {primary sortas="b-sg_prevent"}sg_prevent{/primary}
           {/indexterm}
@@ -312,7 +380,9 @@
       {varlistentry id="sg_raw"}
         {term}{command}sg_raw{/command}{/term}
         {listitem}
-          {para}sends an arbitrary SCSI command to a device.{/para}
+          {para}
+            sends an arbitrary SCSI command to a device.
+          {/para}
           {indexterm zone="sg3_utils sg_raw"}
             {primary sortas="b-sg_raw"}sg_raw{/primary}
           {/indexterm}
@@ -322,7 +392,9 @@
       {varlistentry id="sg_rbuf"}
         {term}{command}sg_rbuf{/command}{/term}
         {listitem}
-          {para}reads data using SCSI READ BUFFER command.{/para}
+          {para}
+            reads data using SCSI READ BUFFER command.
+          {/para}
           {indexterm zone="sg3_utils sg_rbuf"}
             {primary sortas="b-sg_rbuf"}sg_rbuf{/primary}
           {/indexterm}
@@ -332,7 +404,9 @@
       {varlistentry id="sg_rdac"}
         {term}{command}sg_rdac{/command}{/term}
         {listitem}
-          {para}Display or Modify RDAC Redundant Controller Page.{/para}
+          {para}
+            Display or Modify RDAC Redundant Controller Page.
+          {/para}
           {indexterm zone="sg3_utils sg_rdac"}
             {primary sortas="b-sg_rdac"}sg_rdac{/primary}
           {/indexterm}
@@ -342,7 +416,9 @@
       {varlistentry id="sg_read"}
         {term}{command}sg_read{/command}{/term}
         {listitem}
-          {para}read blocks of data continually from same offset.{/para}
+          {para}
+            read blocks of data continually from same offset.
+          {/para}
           {indexterm zone="sg3_utils sg_read"}
             {primary sortas="b-sg_read"}sg_read{/primary}
           {/indexterm}
@@ -352,7 +428,9 @@
       {varlistentry id="sg_read_block_limits"}
         {term}{command}sg_read_block_limits{/command}{/term}
         {listitem}
-          {para}sends a SCSI READ BLOCK LIMITS command.{/para}
+          {para}
+            sends a SCSI READ BLOCK LIMITS command.
+          {/para}
           {indexterm zone="sg3_utils sg_read_block_limits"}
             {primary sortas="b-sg_read_block_limits"}sg_read_block_limits{/primary}
           {/indexterm}
@@ -362,7 +440,9 @@
       {varlistentry id="sg_read_buffer"}
         {term}{command}sg_read_buffer{/command}{/term}
         {listitem}
-          {para}sends a SCSI READ BUFFER command.{/para}
+          {para}
+            sends a SCSI READ BUFFER command.
+          {/para}
           {indexterm zone="sg3_utils sg_read_buffer"}
             {primary sortas="b-sg_read_buffer"}sg_read_buffer{/primary}
           {/indexterm}
@@ -372,7 +452,9 @@
       {varlistentry id="sg_readcap"}
         {term}{command}sg_readcap{/command}{/term}
         {listitem}
-          {para}sends a SCSI READ CAPACITY command.{/para}
+          {para}
+            sends a SCSI READ CAPACITY command.
+          {/para}
           {indexterm zone="sg3_utils sg_readcap"}
             {primary sortas="b-sg_readcap"}sg_readcap{/primary}
           {/indexterm}
@@ -382,7 +464,9 @@
       {varlistentry id="sg_read_long"}
         {term}{command}sg_read_long{/command}{/term}
         {listitem}
-          {para}sends a SCSI READ LONG command.{/para}
+          {para}
+            sends a SCSI READ LONG command.
+          {/para}
           {indexterm zone="sg3_utils sg_read_long"}
             {primary sortas="b-sg_read_long"}sg_read_long{/primary}
           {/indexterm}
@@ -392,17 +476,33 @@
       {varlistentry id="sg_reassign"}
         {term}{command}sg_reassign{/command}{/term}
         {listitem}
-          {para}sends a SCSI REASSIGN BLOCKS command.{/para}
+          {para}
+            sends a SCSI REASSIGN BLOCKS command.
+          {/para}
           {indexterm zone="sg3_utils sg_reassign"}
             {primary sortas="b-sg_reassign"}sg_reassign{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}
 
+      {varlistentry id="sg_referrals"}
+        {term}{command}sg_referrals{/command}{/term}
+        {listitem}
+          {para}
+            sends the SCSI REPORT REFERRALS command.
+          {/para}
+          {indexterm zone="sg3_utils sg_referrals"}
+            {primary sortas="b-sg_referrals"}sg_referrals{/primary}
+          {/indexterm}
+        {/listitem}
+      {/varlistentry}
+
       {varlistentry id="sg_requests"}
         {term}{command}sg_requests{/command}{/term}
         {listitem}
-          {para}sends one or more SCSI REQUEST SENSE commands.{/para}
+          {para}
+            sends one or more SCSI REQUEST SENSE commands.
+          {/para}
           {indexterm zone="sg3_utils sg_requests"}
             {primary sortas="b-sg_requests"}sg_requests{/primary}
           {/indexterm}
@@ -412,8 +512,9 @@
       {varlistentry id="sg_reset"}
         {term}{command}sg_reset{/command}{/term}
         {listitem}
-          {para}sends SCSI device, target, bus or host reset; or checks reset
-          state.{/para}
+          {para}
+            sends SCSI device, target, bus or host reset; or checks reset state.
+          {/para}
           {indexterm zone="sg3_utils sg_reset"}
             {primary sortas="b-sg_reset"}sg_reset{/primary}
           {/indexterm}
@@ -423,7 +524,9 @@
       {varlistentry id="sg_rmsn"}
         {term}{command}sg_rmsn{/command}{/term}
         {listitem}
-          {para}sends a SCSI READ MEDIA SERIAL NUMBER command.{/para}
+          {para}
+            sends a SCSI READ MEDIA SERIAL NUMBER command.
+          {/para}
           {indexterm zone="sg3_utils sg_rmsn"}
             {primary sortas="b-sg_rmsn"}sg_rmsn{/primary}
           {/indexterm}
@@ -433,7 +536,9 @@
       {varlistentry id="sg_rtpg"}
         {term}{command}sg_rtpg{/command}{/term}
         {listitem}
-          {para}sends a SCSI REPORT TARGET PORT GROUPS command.{/para}
+          {para}
+            sends a SCSI REPORT TARGET PORT GROUPS command.
+          {/para}
           {indexterm zone="sg3_utils sg_rtpg"}
             {primary sortas="b-sg_rtpg"}sg_rtpg{/primary}
           {/indexterm}
@@ -443,19 +548,35 @@
       {varlistentry id="sg_safte"}
         {term}{command}sg_safte{/command}{/term}
         {listitem}
-          {para}fetch status from a SCSI Accessed Fault-Tolerant Enclosure
-          (SAF-TE) device.{/para}
+          {para}
+            fetch status from a SCSI Accessed Fault-Tolerant Enclosure
+            (SAF-TE) device.
+          {/para}
           {indexterm zone="sg3_utils sg_safte"}
             {primary sortas="b-sg_safte"}sg_safte{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}
 
+      {varlistentry id="sg_sanitize"}
+        {term}{command}sg_sanitize{/command}{/term}
+        {listitem}
+          {para}
+            sends a SCSI SANITIZE command.
+          {/para}
+          {indexterm zone="sg3_utils sg_sanitize"}
+            {primary sortas="b-sg_sanitize"}sg_sanitize{/primary}
+          {/indexterm}
+        {/listitem}
+      {/varlistentry}
+
       {varlistentry id="sg_sat_identify"}
         {term}{command}sg_sat_identify{/command}{/term}
         {listitem}
-          {para}sends a ATA IDENTIFY (PACKET) DEVICE command via a SCSI to ATA
-          Translation (SAT) layer.{/para}
+          {para}
+            sends a ATA IDENTIFY (PACKET) DEVICE command via a SCSI to ATA
+            Translation (SAT) layer.
+          {/para}
           {indexterm zone="sg3_utils sg_sat_identify"}
             {primary sortas="b-sg_sat_identify"}sg_sat_identify{/primary}
           {/indexterm}
@@ -465,8 +586,10 @@
       {varlistentry id="sg_sat_phy_event"}
         {term}{command}sg_sat_phy_event{/command}{/term}
         {listitem}
-          {para}sends an ATA READ LOG EXT command via a SAT pass through to
-          fetch log page 11h which contains SATA phy event counters.{/para}
+          {para}
+            sends an ATA READ LOG EXT command via a SAT pass through to
+            fetch log page 11h which contains SATA phy event counters.
+          {/para}
           {indexterm zone="sg3_utils sg_sat_phy_event"}
             {primary sortas="b-sg_sat_phy_event"}sg_sat_phy_event{/primary}
           {/indexterm}
@@ -476,8 +599,10 @@
       {varlistentry id="sg_sat_set_features"}
         {term}{command}sg_sat_set_features{/command}{/term}
         {listitem}
-          {para}sends a ATA SET FEATURES command via a SCSI to ATA Translation
-          (SAT) layer.{/para}
+          {para}
+            sends a ATA SET FEATURES command via a SCSI to ATA Translation
+            (SAT) layer.
+          {/para}
           {indexterm zone="sg3_utils sg_sat_set_features"}
             {primary sortas="b-sg_sat_set_features"}sg_sat_set_features{/primary}
           {/indexterm}
@@ -487,8 +612,10 @@
       {varlistentry id="sg_scan"}
         {term}{command}sg_scan{/command}{/term}
         {listitem}
-          {para}does a scan of sg devices (or given SCSI/ATAPI/ATA devices) and
-          prints the results.{/para}
+          {para}
+            does a scan of sg devices (or given SCSI/ATAPI/ATA devices) and
+            prints the results.
+          {/para}
           {indexterm zone="sg3_utils sg_scan"}
             {primary sortas="b-sg_scan"}sg_scan{/primary}
           {/indexterm}
@@ -498,7 +625,9 @@
       {varlistentry id="sg_senddiag"}
         {term}{command}sg_senddiag{/command}{/term}
         {listitem}
-          {para}performs a SCSI SEND DIAGNOSTIC command.{/para}
+          {para}
+            performs a SCSI SEND DIAGNOSTIC command.
+          {/para}
           {indexterm zone="sg3_utils sg_senddiag"}
             {primary sortas="b-sg_senddiag"}sg_senddiag{/primary}
           {/indexterm}
@@ -508,8 +637,10 @@
       {varlistentry id="sg_ses"}
         {term}{command}sg_ses{/command}{/term}
         {listitem}
-          {para}sends controls and fetch status from a SCSI Enclosure Services
-          (SES) device.{/para}
+          {para}
+            sends controls and fetch status from a SCSI Enclosure Services
+            (SES) device.
+          {/para}
           {indexterm zone="sg3_utils sg_ses"}
             {primary sortas="b-sg_ses"}sg_ses{/primary}
           {/indexterm}
@@ -519,8 +650,10 @@
       {varlistentry id="sg_start"}
         {term}{command}sg_start{/command}{/term}
         {listitem}
-          {para}sends SCSI START STOP UNIT command to start, stop, load or eject
-          medium.{/para}
+          {para}
+            sends SCSI START STOP UNIT command to start, stop, load or eject
+            medium.
+          {/para}
           {indexterm zone="sg3_utils sg_start"}
             {primary sortas="b-sg_start"}sg_start{/primary}
           {/indexterm}
@@ -530,7 +663,9 @@
       {varlistentry id="sg_stpg"}
         {term}{command}sg_stpg{/command}{/term}
         {listitem}
-          {para}sends a SCSI SET TARGET PORT GROUPS command.{/para}
+          {para}
+            sends a SCSI SET TARGET PORT GROUPS command.
+          {/para}
           {indexterm zone="sg3_utils sg_stpg"}
             {primary sortas="b-sg_stpg"}sg_stpg{/primary}
           {/indexterm}
@@ -540,7 +675,9 @@
       {varlistentry id="sg_sync"}
         {term}{command}sg_sync{/command}{/term}
         {listitem}
-          {para}sends the scsi command synchronize cache.{/para}
+          {para}
+            sends the scsi command synchronize cache.
+          {/para}
           {indexterm zone="sg3_utils sg_sync"}
             {primary sortas="b-sg_sync"}sg_sync{/primary}
           {/indexterm}
@@ -550,8 +687,10 @@
       {varlistentry id="sg_test_rwbuf"}
         {term}{command}sg_test_rwbuf{/command}{/term}
         {listitem}
-          {para}tests the SCSI host adapter by issuing write and read operations
-          on a device's buffer and calculating checksums.{/para}
+          {para}
+            tests the SCSI host adapter by issuing write and read operations
+            on a device's buffer and calculating checksums.
+          {/para}
           {indexterm zone="sg3_utils sg_test_rwbuf"}
             {primary sortas="b-sg_test_rwbuf"}sg_test_rwbuf{/primary}
           {/indexterm}
@@ -561,7 +700,9 @@
       {varlistentry id="sg_turs"}
         {term}{command}sg_turs{/command}{/term}
         {listitem}
-          {para}sends one or more SCSI TEST UNIT READY commands.{/para}
+          {para}
+            sends one or more SCSI TEST UNIT READY commands.
+          {/para}
           {indexterm zone="sg3_utils sg_turs"}
             {primary sortas="b-sg_turs"}sg_turs{/primary}
           {/indexterm}
@@ -571,7 +712,9 @@
       {varlistentry id="sg_unmap"}
         {term}{command}sg_unmap{/command}{/term}
         {listitem}
-          {para}sends a SCSI UNMAP command.{/para}
+          {para}
+            sends a SCSI UNMAP command.
+          {/para}
           {indexterm zone="sg3_utils sg_unmap"}
             {primary sortas="b-sg_unmap"}sg_unmap{/primary}
           {/indexterm}
@@ -581,7 +724,9 @@
       {varlistentry id="sg_verify"}
         {term}{command}sg_verify{/command}{/term}
         {listitem}
-          {para}invoke SCSI VERIFY command(s) on a block device.{/para}
+          {para}
+            invoke SCSI VERIFY command(s) on a block device.
+          {/para}
           {indexterm zone="sg3_utils sg_verify"}
             {primary sortas="b-sg_verify"}sg_verify{/primary}
           {/indexterm}
@@ -591,8 +736,10 @@
       {varlistentry id="sg_vpd"}
         {term}{command}sg_vpd{/command}{/term}
         {listitem}
-          {para}fetches Vital Product Data (VPD) pages using a SCSI INQUIRY
-          command.{/para}
+          {para}
+            fetches Vital Product Data (VPD) pages using a SCSI INQUIRY
+            command.
+          {/para}
           {indexterm zone="sg3_utils sg_vpd"}
             {primary sortas="b-sg_vpd"}sg_vpd{/primary}
           {/indexterm}
@@ -602,7 +749,9 @@
       {varlistentry id="sg_write_buffer"}
         {term}{command}sg_write_buffer{/command}{/term}
         {listitem}
-          {para}sends a SCSI WRITE BUFFER command.{/para}
+          {para}
+            sends a SCSI WRITE BUFFER command.
+          {/para}
           {indexterm zone="sg3_utils sg_write_buffer"}
             {primary sortas="b-sg_write_buffer"}sg_write_buffer{/primary}
           {/indexterm}
@@ -612,7 +761,9 @@
       {varlistentry id="sg_write_long"}
         {term}{command}sg_write_long{/command}{/term}
         {listitem}
-          {para}sends the SCSI WRITE LONG command.{/para}
+          {para}
+            sends the SCSI WRITE LONG command.
+          {/para}
           {indexterm zone="sg3_utils sg_write_long"}
             {primary sortas="b-sg_write_long"}sg_write_long{/primary}
           {/indexterm}
@@ -622,7 +773,9 @@
       {varlistentry id="sg_write_same"}
         {term}{command}sg_write_same{/command}{/term}
         {listitem}
-          {para}sends the SCSI WRITE SAME command.{/para}
+          {para}
+            sends the SCSI WRITE SAME command.
+          {/para}
           {indexterm zone="sg3_utils sg_write_same"}
             {primary sortas="b-sg_write_same"}sg_write_same{/primary}
           {/indexterm}
@@ -632,7 +785,9 @@
       {varlistentry id="sg_wr_mode"}
         {term}{command}sg_wr_mode{/command}{/term}
         {listitem}
-          {para}write mode page.{/para}
+          {para}
+            writes mode page.
+          {/para}
           {indexterm zone="sg3_utils sg_wr_mode"}
             {primary sortas="b-sg_wr_mode"}sg_wr_mode{/primary}
           {/indexterm}
@@ -640,11 +795,13 @@
       {/varlistentry}
 
       {varlistentry id="libsgutils2"}
-        {term}{filename class='libraryfile'}libsgutils2.{so,a}{/filename}{/term}
+        {term}{filename class='libraryfile'}libsgutils2.so{/filename}{/term}
         {listitem}
-          {para}contains the {application}sg3_utils{/application} API functions.{/para}
+          {para}
+            contains the {application}sg3_utils{/application} API functions.
+          {/para}
           {indexterm zone="sg3_utils libsgutils2"}
-            {primary sortas="c-libsgutils2"}libsgutils2.{so,a}{/primary}
+            {primary sortas="c-libsgutils2"}libsgutils2.so{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}

Index: introduction/welcome/changelog.xml
===================================================================
--- introduction/welcome/changelog.xml	(revision 10168)
+++ introduction/welcome/changelog.xml	(revision 10169)
@@ -45,12 +45,21 @@
       {para}May 11th, 2012{/para}
       {itemizedlist}
         {listitem}
+          {para}[krejzi] - libdvdcss 1.2.12.{/para}
+        {/listitem}
+        {listitem}
+          {para}[krejzi] - libidn 1.24.{/para}
+        {/listitem}
+        {listitem}
           {para}[krejzi] - Nano 2.3.1.{/para}
         {/listitem}
         {listitem}
           {para}[krejzi] - OpenLDAP 2.4.31.{/para}
         {/listitem}
         {listitem}
+          {para}[krejzi] - sg3_utils 1.33.{/para}
+        {/listitem}
+        {listitem}
           {para}[krejzi] - unixODBC 2.3.1.{/para}
         {/listitem}
       {/itemizedlist}

Index: multimedia/libdriv/libdvdcss.xml
===================================================================
--- multimedia/libdriv/libdvdcss.xml	(revision 10168)
+++ multimedia/libdriv/libdvdcss.xml	(revision 10169)
@@ -6,8 +6,8 @@
 
   {!ENTITY libdvdcss-download-http "http://www.videolan.org/pub/libdvdcss/&libdvdcss-version;/libdvdcss-&libdvdcss-version;.tar.bz2"}
   {!ENTITY libdvdcss-download-ftp  "&gentoo-ftp-repo;/libdvdcss-&libdvdcss-version;.tar.bz2"}
-  {!ENTITY libdvdcss-md5sum        "d25d906c3f9007ccd91b1efb909f93e7"}
-  {!ENTITY libdvdcss-size          "296 KB"}
+  {!ENTITY libdvdcss-md5sum        "2218a193900e3203aa10dc24cdf54275"}
+  {!ENTITY libdvdcss-size          "324 KB"}
   {!ENTITY libdvdcss-buildsize     "3.5 MB"}
   {!ENTITY libdvdcss-time          "less than 0.1 SBU"}
 ]}
@@ -29,39 +29,55 @@
   {sect2 role="package"}
     {title}Introduction to libdvdcss{/title}
 
-    {para}{application}libdvdcss{/application} is a simple library
-    designed for accessing DVDs as a block device without having to
-    bother about the decryption.{/para}
+    {para}
+      {application}libdvdcss{/application} is a simple library
+      designed for accessing DVDs as a block device without having to
+      bother about the decryption.
+    {/para}
 
     &lfs71_checked;
 
     {bridgehead renderas="sect3"}Package Information{/bridgehead}
     {itemizedlist spacing="compact"}
       {listitem}
-        {para}Download (HTTP): {ulink url="&libdvdcss-download-http;"/}{/para}
+        {para}
+          Download (HTTP): {ulink url="&libdvdcss-download-http;"/}
+        {/para}
       {/listitem}
       {listitem}
-        {para}Download (FTP): {ulink url="&libdvdcss-download-ftp;"/}{/para}
+        {para}
+          Download (FTP): {ulink url="&libdvdcss-download-ftp;"/}
+        {/para}
       {/listitem}
       {listitem}
-        {para}Download MD5 sum: &libdvdcss-md5sum;{/para}
+        {para}
+          Download MD5 sum: &libdvdcss-md5sum;
+        {/para}
       {/listitem}
       {listitem}
-        {para}Download size: &libdvdcss-size;{/para}
+        {para}
+          Download size: &libdvdcss-size;
+        {/para}
       {/listitem}
       {listitem}
-        {para}Estimated disk space required: &libdvdcss-buildsize;{/para}
+        {para}
+          Estimated disk space required: &libdvdcss-buildsize;
+        {/para}
       {/listitem}
       {listitem}
-        {para}Estimated build time: &libdvdcss-time;{/para}
+        {para}
+          Estimated build time: &libdvdcss-time;
+        {/para}
       {/listitem}
     {/itemizedlist}
 
     {bridgehead renderas="sect3"}libdvdcss Dependencies{/bridgehead}
 
     {bridgehead renderas="sect4"}Optional (to Create Documentation){/bridgehead}
-    {para role="optional"}{xref linkend="doxygen"/}, and
-    {xref linkend="texlive"/}{/para}
+    {para role="optional"}
+      {xref linkend="doxygen"/} and
+      {xref linkend="texlive"/}
+    {/para}
 
     {para condition="html" role="usernotes"}User Notes:
     {ulink url="&blfs-wiki;/libdvdcss"/}{/para}
@@ -72,43 +88,57 @@
     {title}Installation of libdvdcss{/title}
 
     {note}
-      {para}In certain circumstances the 'inputenc' package in the
-      {application}LaTeX{/application} installation may not work properly
-      during the build, causing it to hang up. If this happens, issue
-      {userinput}quit{/userinput} at the {application}LaTeX{/application}
-      prompt and then issue the following command at the shell prompt:{/para}
+      {para}
+        In certain circumstances the 'inputenc' package in the
+        {application}LaTeX{/application} installation may not work properly
+        during the build, causing it to hang up. If this happens, issue
+        {userinput}quit{/userinput} at the {application}LaTeX{/application}
+        prompt and then issue the following command at the shell prompt:
+      {/para}
 
 {screen}{userinput}echo "INPUT_ENCODING         = ISO-8859-1" }}doc/doxygen.cfg{/userinput}{/screen}
 
-      {para}Now either resume the build, or start over. Disregard this note
-      if you do not have a {application}LaTeX{/application} package or
-      {application}Doxygen{/application} installed.{/para}
+      {para}
+        Now either resume the build, or start over. Disregard this note
+        if you do not have a {application}LaTeX{/application} package or
+        {application}Doxygen{/application} installed.
+      {/para}
     {/note}
 
-    {para}Install {application}libdvdcss{/application} by running the
-    following commands:{/para}
+    {para}
+      Install {application}libdvdcss{/application} by running the
+      following commands:
+    {/para}
 
-{screen}{userinput}./configure --prefix=/usr &&
+{screen}{userinput}./configure --prefix=/usr --disable-static &&
 make{/userinput}{/screen}
 
-    {para}If you have {application}Doxygen{/application} and
-    {application}teTeX{/application} or {application}TeX Live{/application}
-    installed, HTML and Postscript documentation was created during the build.
-    If you also want to install a PDF version of the reference manual, issue
-    the following command:{/para}
+    {para}
+      If you have {application}Doxygen{/application} and
+      {application}TeX Live{/application} installed, HTML and Postscript 
+      documentation was created during the build.
+      If you also want to install a PDF version of the reference manual, issue
+      the following command:
+    {/para}
 
 {screen}{userinput}make -C doc/latex pdf{/userinput}{/screen}
 
-    {para}This package does not come with a test suite.{/para}
+    {para}
+      This package does not come with a test suite.
+    {/para}
 
-    {para}Now, as the {systemitem class="username"}root{/systemitem} user:{/para}
+    {para}
+      Now, as the {systemitem class="username"}root{/systemitem} user:
+    {/para}
 
 {screen role="root"}{userinput}make install{/userinput}{/screen}
 
-    {para}If you have {application}Doxygen{/application} and
-    {application}teTeX{/application} or {application}TeX Live{/application}
-    installed, install the documentation using the following commands as the
-    {systemitem class="username"}root{/systemitem} user:{/para}
+    {para}
+      If you have {application}Doxygen{/application} and
+      {application}TeX Live{/application} installed, install the 
+      documentation using the following commands as the
+      {systemitem class="username"}root{/systemitem} user:
+    {/para}
 
 {screen role="root"}{userinput}install -v -m755 -d         /usr/share/doc/libdvdcss-&libdvdcss-version;/html &&
 install -v -m644 doc/html/* /usr/share/doc/libdvdcss-&libdvdcss-version;/html &&
@@ -120,8 +150,8 @@
   {sect2 role="commands"}
     {title}Command Explanations{/title}
 
-    {para}{parameter}--disable-static{/parameter}: prevent static library
-    being built and installed.{/para}
+    {xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
+      href="../../xincludes/static-libraries.xml"/}
 
   {/sect2}
 
@@ -129,14 +159,17 @@
     {title}Contents{/title}
 
     {segmentedlist}
-      {segtitle}Installed Programs{/segtitle}
       {segtitle}Installed Library{/segtitle}
       {segtitle}Installed Directories{/segtitle}
 
       {seglistitem}
-        {seg}None{/seg}
-        {seg}libdvdcss.{so,a}{/seg}
-        {seg}/usr/include/dvdcss and /usr/share/doc/libdvdcss-&libdvdcss-version;{/seg}
+        {seg}
+          libdvdcss.so
+        {/seg}
+        {seg}
+          /usr/include/dvdcss and
+          /usr/share/doc/libdvdcss-&libdvdcss-version;
+        {/seg}
       {/seglistitem}
     {/segmentedlist}
 
@@ -146,12 +179,14 @@
       {?dbhtml list-presentation="table"?}
 
       {varlistentry id="libdvdcss-lib"}
-        {term}{filename class='libraryfile'}libdvdcss.{so,a}{/filename}{/term}
+        {term}{filename class='libraryfile'}libdvdcss.so{/filename}{/term}
         {listitem}
-          {para}provides the functionality that is required for transparent
-          DVD access with CSS decryption.{/para}
+          {para}
+            provides the functionality that is required for transparent
+            DVD access with CSS decryption.
+          {/para}
           {indexterm zone="libdvdcss libdvdcss-lib"}
-            {primary sortas="c-libdvdcss"}libdvdcss.{so,a}{/primary}
+            {primary sortas="c-libdvdcss"}libdvdcss.so{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}




More information about the lfs-traducfr mailing list