[lfs-fr] [BLFS-EN] r10167

Robot myou72 at orange.fr
Ven 11 Mai 05:54:55 PDT 2012


Révision 10167

fichiers modifiés :
   introduction/welcome/changelog.xml
   general.ent
   server/other/openldap.xml

Log :
OpenLDAP 2.4.31

Le robot a traité 0 % du commit anglais.

Index: general.ent
===================================================================
--- general.ent	(revision 10166)
+++ general.ent	(revision 10167)
@@ -590,8 +590,7 @@
 {!-- Chapter 23 --}
 {!-- dhcp (chapter 13) --}
 {!-- removed {!ENTITY leafnode-version             "1.11.5"} --}
-{!ENTITY openldap-download-version    "stable-20100719"}
-{!ENTITY openldap-version             "2.4.30"}
+{!ENTITY openldap-version             "2.4.31"}
 {!ENTITY virtuoso-version             "6.1.5"}
 {!ENTITY soprano-version              "2.7.5"}
 {!-- rsync (chapter 14) --}

Index: introduction/welcome/changelog.xml
===================================================================
--- introduction/welcome/changelog.xml	(revision 10166)
+++ introduction/welcome/changelog.xml	(revision 10167)
@@ -42,6 +42,15 @@
 
 --}
     {listitem}
+      {para}May 11th, 2012{/para}
+      {itemizedlist}
+        {listitem}
+          {para}[krejzi] - OpenLDAP 2.4.31.{/para}
+        {/listitem}
+      {/itemizedlist}
+    {/listitem}
+
+    {listitem}
       {para}May 10th, 2012{/para}
       {itemizedlist}
         {listitem}

Index: server/other/openldap.xml
===================================================================
--- server/other/openldap.xml	(revision 10166)
+++ server/other/openldap.xml	(revision 10167)
@@ -4,10 +4,9 @@
   {!ENTITY % general-entities SYSTEM "../../general.ent"}
   %general-entities;
 
-{!--  {!ENTITY openldap-download-http "http://gd.tuwien.ac.at/infosys/network/OpenLDAP/openldap-release/openldap-&openldap-version;.tgz"} --}
   {!ENTITY openldap-download-http " "}
   {!ENTITY openldap-download-ftp  "ftp://ftp.openldap.org/pub/OpenLDAP/openldap-release/openldap-&openldap-version;.tgz"}
-  {!ENTITY openldap-md5sum        "4f210937cf87e3467a536dd3fed1b8b4"}
+  {!ENTITY openldap-md5sum        "804c6cb5698db30b75ad0ff1c25baefd"}
   {!ENTITY openldap-size          "5.2 MB"}
   {!ENTITY openldap-buildsize     "152 MB"}
   {!ENTITY openldap-time          "2.0 SBU and approximately 35 minutes to run the tests (processor independent)"}
@@ -30,60 +29,88 @@
   {sect2 role="package"}
     {title}Introduction to OpenLDAP{/title}
 
-    {para}The {application}OpenLDAP{/application} package provides an open
-    source implementation of the Lightweight Directory Access Protocol.{/para}
+    {para}
+      The {application}OpenLDAP{/application} package provides an open
+      source implementation of the Lightweight Directory Access Protocol.
+    {/para}
 
+    &lfs70_checked;
+
     {bridgehead renderas="sect3"}Package Information{/bridgehead}
     {itemizedlist spacing="compact"}
       {listitem}
-        {para}Download (HTTP): {ulink url="&openldap-download-http;"/}{/para}
+        {para}
+          Download (HTTP): {ulink url="&openldap-download-http;"/}
+        {/para}
       {/listitem}
       {listitem}
-        {para}Download (FTP): {ulink url="&openldap-download-ftp;"/}{/para}
+        {para}
+          Download (FTP): {ulink url="&openldap-download-ftp;"/}
+        {/para}
       {/listitem}
       {listitem}
-        {para}Download MD5 sum: &openldap-md5sum;{/para}
+        {para}
+          Download MD5 sum: &openldap-md5sum;
+        {/para}
       {/listitem}
       {listitem}
-        {para}Download size: &openldap-size;{/para}
+        {para}
+          Download size: &openldap-size;
+        {/para}
       {/listitem}
       {listitem}
-        {para}Estimated disk space required: &openldap-buildsize;{/para}
+        {para}
+          Estimated disk space required: &openldap-buildsize;
+        {/para}
       {/listitem}
       {listitem}
-        {para}Estimated build time: &openldap-time;{/para}
+        {para}
+          Estimated build time: &openldap-time;
+        {/para}
       {/listitem}
     {/itemizedlist}
 
     {bridgehead renderas="sect3"}Additional Downloads{/bridgehead}
     {itemizedlist spacing="compact"}
       {listitem}
-        {para}Required patch: {ulink
-        url="&patch-root;/openldap-&openldap-version;-blfs-paths-1.patch"/}{/para}
-        {para}Required patch: {ulink
-        url="&patch-root;/openldap-&openldap-version;-symbol-versions-1.patch"/}{/para}
-        {para}Optional patch: {ulink
-        url="&patch-root;/openldap-&openldap-version;-ntlm-1.patch"/}{/para}
+        {para}
+          Required patch:
+          {ulink url="&patch-root;/openldap-&openldap-version;-blfs-paths-1.patch"/}
+        {/para}
+        {para}
+          Required patch:
+          {ulink url="&patch-root;/openldap-&openldap-version;-symbol-versions-1.patch"/}
+        {/para}
+        {para}
+          Optional patch:
+          {ulink url="&patch-root;/openldap-&openldap-version;-ntlm-1.patch"/}
+        {/para}
       {/listitem}
     {/itemizedlist}
 
     {bridgehead renderas="sect3"}OpenLDAP Dependencies{/bridgehead}
 
     {bridgehead renderas="sect4"}Required{/bridgehead}
-    {para role="required"}{xref linkend="db"/}{/para}
+    {para role="required"}
+      {xref linkend="db"/}
+    {/para}
 
     {bridgehead renderas="sect4"}Recommended{/bridgehead}
-    {para role="recommended"}{xref linkend="cyrus-sasl"/}
-    and {xref linkend="openssl"/}{/para}
+    {para role="recommended"}
+      {xref linkend="cyrus-sasl"/} and
+      {xref linkend="openssl"/}
+    {/para}
 
     {bridgehead renderas="sect4"}Optional{/bridgehead}
-    {para role="optional"}{xref linkend="icu"/},
-    {xref linkend="tcpwrappers"/},
-    {xref linkend="unixodbc"/},
-    {ulink url="http://www.openslp.org/"}OpenSLP{/ulink},
-    {xref linkend="pth"/}, and either
-    {xref linkend="mysql"/} or
-    {xref linkend="postgresql"/}{/para}
+    {para role="optional"}
+      {xref linkend="icu"/},
+      {xref linkend="mysql"/} or
+      {xref linkend="postgresql"/},
+      {ulink url="http://www.openslp.org/"}OpenSLP{/ulink},
+      {xref linkend="pth"/},
+      {xref linkend="tcpwrappers"/} and
+      {xref linkend="unixodbc"/}
+    {/para}
 
     {para condition="html" role="usernotes"}User Notes:
     {ulink url="&blfs-wiki;/openldap"/}{/para}
@@ -94,20 +121,25 @@
     {title}Installation of OpenLDAP{/title}
 
     {note}
-      {para}Without this patch, the Exchange 
-      addressbook integration uses simple binds with cleartext 
-      passwords. If you are going to build evolution-data-server
-      with OpenLDAP support, apply this patch:{/para}
+      {para}
+        Without the following patch, the {application}Evolution{/application}
+        Exchange addressbook integration uses simple binds with cleartext 
+        passwords. If you are going to build 
+        {application}Evolution Data Server{/application} with
+        {application}OpenLDAP{/application} support, apply the following patch:
+      {/para}
 
 {screen}{userinput}patch -Np1 -i ../openldap-&openldap-version;-ntlm-1.patch{/userinput}{/screen}
     {/note}
 
     {note}
-      {para}If you only need to install the client side {command}ldap*{/command}
-      binaries, corresponding man pages, libraries and header files (referred to
-      as a {quote}client-only{/quote} install), issue the following
-      {command}configure{/command} command instead of the other one, and
-      then proceed with the remaining commands (no test suite available):{/para}
+      {para}
+        If you only need to install the client side {command}ldap*{/command}
+        binaries, corresponding man pages, libraries and header files (referred to
+        as a {quote}client-only{/quote} install), issue the following
+        {command}configure{/command} command instead of the other one, and
+        then proceed with the remaining commands (no test suite available):
+      {/para}
 
 {screen}{userinput}patch -Np1 -i ../openldap-&openldap-version;-blfs-paths-1.patch &&
 patch -Np1 -i ../openldap-&openldap-version;-symbol-versions-1.patch &&
@@ -119,8 +151,10 @@
             --disable-slapd{/userinput}{/screen}
     {/note}
 
-    {para}Install {application}OpenLDAP{/application} by
-    running the following commands:{/para}
+    {para}
+      Install {application}OpenLDAP{/application} by
+      running the following commands:
+    {/para}
 
 {screen}{userinput}patch -Np1 -i ../openldap-&openldap-version;-blfs-paths-1.patch &&
 patch -Np1 -i ../openldap-&openldap-version;-symbol-versions-1.patch &&
@@ -142,13 +176,17 @@
 make depend &&
 make{/userinput}{/screen}
 
-    {para}To test the results, issue: {command}make test{/command}. If you've
-    enabled {application}tcp_wrappers{/application}, ensure you add 127.0.0.1
-    to the {parameter}slapd{/parameter} line in the
-    {filename}/etc/hosts.allow{/filename} file if you have a restrictive
-    {filename}/etc/hosts.deny{/filename} file.{/para}
+    {para}
+      To test the results, issue: {command}make test{/command}. If you've
+      enabled {application}tcp_wrappers{/application}, ensure you add 127.0.0.1
+      to the {parameter}slapd{/parameter} line in the
+      {filename}/etc/hosts.allow{/filename} file if you have a restrictive
+      {filename}/etc/hosts.deny{/filename} file.
+    {/para}
 
-    {para}Now, as the {systemitem class="username"}root{/systemitem} user:{/para}
+    {para}
+      Now, as the {systemitem class="username"}root{/systemitem} user:
+    {/para}
 
 {screen role="root"}{userinput}make install &&
 
@@ -166,58 +204,80 @@
     {title}Command Explanations{/title}
 
     {xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
-    href="../../xincludes/static-libraries.xml"/}
+      href="../../xincludes/static-libraries.xml"/}
 
-    {para}{parameter}--disable-debug{/parameter}: Disable debugging code.{/para}
+    {para}
+      {option}--disable-debug{/option}: This parameter disables
+      the debugging code in {application}OpenLDAP{/application}.
+    {/para}
 
-    {para}{parameter}--enable-dynamic{/parameter}: This forces the
-    {application}OpenLDAP{/application} libraries to be dynamically linked
-    to the executable programs.{/para}
+    {para}
+      {option}--enable-dynamic{/option}: This parameter forces the
+      {application}OpenLDAP{/application} libraries to be dynamically
+      linked to the executable programs.
+    {/para}
 
-    {para}{parameter}--enable-crypt{/parameter}: Enables crypt(3)
-    passwords.{/para}
+    {para}
+      {option}--enable-crypt{/option}: This parameter enables using of
+      {command}crypt(3){/command} passwords.
+    {/para}
 
-    {para}{parameter}--enable-modules{/parameter}: Enables dynamic module
-    support.{/para}
+    {para}
+      {option}--enable-modules{/option}: This parameter enables dynamic
+      module support.
+    {/para}
 
-    {para}{parameter}--enable-rlookups{/parameter}: This parameter enables
-    reverse lookups of client hostnames.{/para}
+    {para}
+      {option}--enable-rlookups{/option}: This parameter enables
+      reverse lookups of client hostnames.
+    {/para}
 
-    {para}{parameter}--enable-backends{/parameter}: This parameter enables
-    all available backends.{/para}
+    {para}
+      {option}--enable-backends{/option}: This parameter enables
+      all available backends.
+    {/para}
 
-    {para}{parameter}--enable-overlays{/parameter}: This parameter enables
-    all available overlays.{/para}
+    {para}
+      {option}--enable-overlays{/option}: This parameter enables
+      all available overlays.
+    {/para}
 
-    {para}{parameter}--disable-ndb{/parameter}: This parameter disables
-    MySQL NDB Cluster backend which causes configure to fail if
-    MySQL is present.{/para}
+    {para}
+      {option}--disable-ndb{/option}: This parameter disables
+      {application}MySQL{/application} NDB Cluster backend 
+      which causes configure to fail if
+      {application}MySQL{/application} is present.
+    {/para}
 
-    {para}{parameter}--disable-sql{/parameter}: This parameter explicitly
-    disables the sql backend.  Omit this switch if a SQL server is
-    installed and you are going to use a SQL backend (experimental).{/para}
+    {para}
+      {option}--disable-sql{/option}: This parameter explicitly
+      disables the SQL backend.  Omit this switch if a SQL server is
+      installed and you are going to use a SQL backend.
+    {/para}
 
-    {para}{parameter}--enable-spasswd{/parameter}: This parameter enables
-    SASL password verification.{/para}
+    {para}
+      {option}--enable-spasswd{/option}: This parameter enables
+      {application}SASL{/application} password verification.
+    {/para}
     
-    {para}{parameter}--enable-slp{/parameter}: This parameter enables
-    SLPv2 support. Use this switch if you have installed
-    {ulink url="http://www.openslp.org/"}OpenSLP{/ulink}.{/para}
+    {para}
+      {option}--enable-slp{/option}: This parameter enables
+      SLPv2 support. Use this switch if you have installed
+      {ulink url="http://www.openslp.org/"}OpenSLP{/ulink}.
+    {/para}
     
-    {para}{parameter}--enable-wrappers{/parameter}: This parameter enables
-    tcp wrappers support. Use this switch if you have installed
-    {xref linkend="tcpwrappers"/}.{/para}
+    {para}
+      {option}--enable-wrappers{/option}: This parameter enables
+      TCP Wrappers support. Use this switch if you have installed
+      {xref linkend="tcpwrappers"/}.
+    {/para}
 
-    {para}{option}--disable-bdb --disable-hdb --with-ldbm-api=gdbm{/option}:
-    Pass these parameters to the {command}configure{/command} command if you
-    wish to use {application}GDBM{/application} instead of
-    {application}Berkeley DB{/application} as the primary backend
-    database.{/para}
-
     {note}
-      {para}You can run {command}./configure --help{/command} to see if there
-      are other parameters you can pass to the {command}configure{/command}
-      command to enable other options or dependency packages.{/para}
+      {para}
+        You can run {command}./configure --help{/command} to see if there
+        are other parameters you can pass to the {command}configure{/command}
+        command to enable other options or dependency packages.
+      {/para}
     {/note}
 
   {/sect2}
@@ -239,12 +299,14 @@
     {sect3}
       {title}Configuration Information{/title}
 
-      {para}Configuring the {command}slapd{/command} servers can be complex.
-      Securing the LDAP directory, especially if you are storing non-public
-      data such as password databases, can also be a challenging task. You'll
-      need to modify the {filename}/etc/openldap/slapd.conf{/filename} and
-      {filename}/etc/openldap/ldap.conf{/filename} files to set up
-      {application}OpenLDAP{/application} for your particular needs.{/para}
+      {para}
+        Configuring the {command}slapd{/command} servers can be complex.
+        Securing the LDAP directory, especially if you are storing non-public
+        data such as password databases, can also be a challenging task. You'll
+        need to modify the {filename}/etc/openldap/slapd.conf{/filename} and
+        {filename}/etc/openldap/ldap.conf{/filename} files to set up
+        {application}OpenLDAP{/application} for your particular needs.
+      {/para}
 
       {indexterm zone="openldap openldap-config"}
         {primary
@@ -263,56 +325,55 @@
 
       {itemizedlist spacing='compact'}
         {listitem}
-          {para}The {command}slapd{/command} man page{/para}
+          {para}
+            The {command}slapd{/command} man page.
+          {/para}
         {/listitem}
         {listitem}
-          {para}The {filename}slapd.conf{/filename} man page{/para}
+          {para}
+            The {filename}slapd.conf{/filename} man page.
+          {/para}
         {/listitem}
         {listitem}
-          {para}The {ulink
-          url="http://www.openldap.org/doc/admin24/"}OpenLDAP 2.4
-          Administrator's Guide{/ulink} (also installed locally in
-          {filename class='directory'}
-          /usr/share/doc/openldap-&openldap-version;/guide/admin{/filename}){/para}
+          {para}
+            The {ulink url="http://www.openldap.org/doc/admin24/"}
+            OpenLDAP 2.4 Administrator's Guide{/ulink} 
+            (also installed locally in {filename class='directory'}
+            /usr/share/doc/openldap-&openldap-version;/guide/admin{/filename}).
+          {/para}
         {/listitem}
         {listitem}
-          {para}Documents located at
-          {ulink url="http://www.openldap.org/pub/"/}{/para}
+          {para}
+            Documents located at
+            {ulink url="http://www.openldap.org/pub/"/}.
+          {/para}
         {/listitem}
       {/itemizedlist}
 
     {/sect3}
 
     {sect3}
-      {title}Utilizing GDBM{/title}
-
-      {para}To utilize {application}GDBM{/application} as the database
-      backend, the {quote}database{/quote} entry in
-      {filename}/etc/openldap/slapd.conf{/filename} must be changed from
-      {quote}bdb{/quote} to {quote}ldbm{/quote}. You can use both by
-      creating an additional database section in
-      {filename}/etc/openldap/slapd.conf{/filename}.{/para}
-
-    {/sect3}
-
-    {sect3}
       {title}Mozilla Address Directory{/title}
 
-      {para}By default, LDAPv2 support is disabled in the
-      {filename}slapd.conf{/filename} file. Once the database is properly
-      set up and {application}Mozilla{/application} is configured to use the
-      directory, you must add {option}allow bind_v2{/option} to the
-      {filename}slapd.conf{/filename} file.{/para}
+      {para}
+        By default, LDAPv2 support is disabled in the
+        {filename}slapd.conf{/filename} file. Once the database is properly
+        set up and {application}Mozilla{/application} is configured to use the
+        directory, you must add {option}allow bind_v2{/option} to the
+        {filename}slapd.conf{/filename} file.
+      {/para}
 
     {/sect3}
 
     {sect3 id="openldap-init"}
       {title}Boot Script{/title}
 
-      {para}To automate the startup of the LDAP server at system bootup,
-      install the {filename}/etc/rc.d/init.d/openldap{/filename} init script
-      included in the {xref linkend="bootscripts"/} package
-      using the following command:{/para}
+      {para}
+        To automate the startup of the LDAP server at system bootup,
+        install the {filename}/etc/rc.d/init.d/openldap{/filename} init script
+        included in the {xref linkend="bootscripts"/} package
+        using the following command:
+      {/para}
 
       {indexterm zone="openldap openldap-init"}
         {primary sortas="f-openldap"}openldap{/primary}
@@ -321,11 +382,13 @@
 {screen role="root"}{userinput}make install-openldap{/userinput}{/screen}
 
       {note}
-        {para}The init script starts the daemon without any parameters.
-        You'll need to modify the 
-        {filename}/etc/sysconfig/openldap{/filename} to include the 
-        parameters needed for your specific configuration. See the 
-        {command}slapd{/command} man page for parameter information.{/para}
+        {para}
+          The init script starts the daemon without any parameters.
+          You'll need to modify the 
+          {filename}/etc/sysconfig/openldap{/filename} to include the 
+          parameters needed for your specific configuration. See the 
+          {command}slapd{/command} man page for parameter information.
+        {/para}
       {/note}
 
     {/sect3}
@@ -333,16 +396,21 @@
     {sect3}
       {title}Testing the Configuration{/title}
 
-      {para}Start the LDAP server using the init script:{/para}
+      {para}
+        Start the LDAP server using the init script:
+      {/para}
 
 {screen role="root"}{userinput}/etc/rc.d/init.d/openldap start{/userinput}{/screen}
 
-      {para}Verify access to the LDAP server with the following
-      command:{/para}
+      {para}
+        Verify access to the LDAP server with the following command:
+      {/para}
 
 {screen}{userinput}ldapsearch -x -b '' -s base '(objectclass=*)' namingContexts{/userinput}{/screen}
 
-      {para}The expected result is:{/para}
+      {para}
+        The expected result is:
+      {/para}
 
 {screen}{computeroutput}# extended LDIF
 #
@@ -376,12 +444,19 @@
       {segtitle}Installed Directories{/segtitle}
 
       {seglistitem}
-        {seg}ldapadd, ldapcompare, ldapdelete, ldapexop, ldapmodify, ldapmodrdn,
-        ldappasswd, ldapsearch, ldapurl, ldapwhoami, slapacl, slapadd, slapauth,
-        slapcat, slapd, slapdn, slapindex, slappasswd, slapschema and slaptest{/seg}
-        {seg}liblber.so, libldap.so,a and libldap_r.so{/seg}
-        {seg}/etc/openldap, /usr/lib/openldap
-        and /var/lib/openldap{/seg}
+        {seg}
+          ldapadd, ldapcompare, ldapdelete, ldapexop, ldapmodify, ldapmodrdn,
+          ldappasswd, ldapsearch, ldapurl, ldapwhoami, slapacl, slapadd, slapauth,
+          slapcat, slapd, slapdn, slapindex, slappasswd, slapschema and slaptest
+        {/seg}
+        {seg}
+          liblber.so, libldap.so,a and libldap_r.so
+        {/seg}
+        {seg}
+          /etc/openldap,
+          /usr/lib/openldap and
+          /var/lib/openldap
+        {/seg}
       {/seglistitem}
     {/segmentedlist}
 
@@ -393,8 +468,9 @@
       {varlistentry id="ldapadd"}
         {term}{command}ldapadd{/command}{/term}
         {listitem}
-          {para}opens a connection to an LDAP server, binds and adds
-          entries.{/para}
+          {para}
+            opens a connection to an LDAP server, binds and adds entries.
+          {/para}
           {indexterm zone="openldap ldapadd"}
             {primary sortas="b-ldapadd"}ldapadd{/primary}
           {/indexterm}
@@ -404,8 +480,10 @@
       {varlistentry id="ldapcompare"}
         {term}{command}ldapcompare{/command}{/term}
         {listitem}
-          {para}opens a connection to an LDAP server, binds and performs
-          a compare using specified parameters.{/para}
+          {para}
+            opens a connection to an LDAP server, binds and performs
+            a compare using specified parameters.
+          {/para}
           {indexterm zone="openldap ldapcompare"}
             {primary sortas="b-ldapcompare"}ldapcompare{/primary}
           {/indexterm}
@@ -415,8 +493,10 @@
       {varlistentry id="ldapdelete"}
         {term}{command}ldapdelete{/command}{/term}
         {listitem}
-          {para} opens a connection to an LDAP server, binds and deletes
-          one or more entries.{/para}
+          {para}
+            opens a connection to an LDAP server, binds and deletes
+            one or more entries.
+          {/para}
           {indexterm zone="openldap ldapdelete"}
             {primary sortas="b-ldapdelete"}ldapdelete{/primary}
           {/indexterm}
@@ -426,9 +506,11 @@
       {varlistentry id="ldapexop"}
         {term}{command}ldapexop{/command}{/term}
         {listitem}
-          {para}issues the LDAP extended operation specified by 
-          oid or one of the  special  keywords  whoami,
-          cancel, or refresh.{/para}
+          {para}
+            issues the LDAP extended operation specified by 
+            oid or one of the  special  keywords  whoami,
+            cancel, or refresh.
+          {/para}
           {indexterm zone="openldap ldapexop"}
             {primary sortas="b-ldapexop"}ldapexop{/primary}
           {/indexterm}
@@ -438,8 +520,9 @@
       {varlistentry id="ldapmodify"}
         {term}{command}ldapmodify{/command}{/term}
         {listitem}
-          {para}opens a connection to an LDAP server, binds and modifies
-          entries.{/para}
+          {para}
+            opens a connection to an LDAP server, binds and modifies entries.
+          {/para}
           {indexterm zone="openldap ldapmodify"}
             {primary sortas="b-ldapmodify"}ldapmodify{/primary}
           {/indexterm}
@@ -449,8 +532,10 @@
       {varlistentry id="ldapmodrdn"}
         {term}{command}ldapmodrdn{/command}{/term}
         {listitem}
-          {para}opens a connection to an LDAP server, binds and modifies
-          the RDN of entries.{/para}
+          {para}
+            opens a connection to an LDAP server, binds and modifies
+            the RDN of entries.
+          {/para}
           {indexterm zone="openldap ldapmodrdn"}
             {primary sortas="b-ldapmodrdn"}ldapmodrdn{/primary}
           {/indexterm}
@@ -460,7 +545,9 @@
       {varlistentry id="ldappasswd"}
         {term}{command}ldappasswd{/command}{/term}
         {listitem}
-          {para}is a tool to set the password of an LDAP user.{/para}
+          {para}
+            is a tool used to set the password of an LDAP user.
+          {/para}
           {indexterm zone="openldap ldappasswd"}
             {primary sortas="b-ldappasswd"}ldappasswd{/primary}
           {/indexterm}
@@ -470,8 +557,10 @@
       {varlistentry id="ldapsearch"}
         {term}{command}ldapsearch{/command}{/term}
         {listitem}
-          {para}opens a connection to an LDAP server, binds and performs
-          a search using specified parameters.{/para}
+          {para}
+            opens a connection to an LDAP server, binds and performs
+            a search using specified parameters.
+          {/para}
           {indexterm zone="openldap ldapsearch"}
             {primary sortas="b-ldapsearch"}ldapsearch{/primary}
           {/indexterm}
@@ -481,8 +570,10 @@
       {varlistentry id="ldapurl"}
         {term}{command}ldapurl{/command}{/term}
         {listitem}
-          {para}is a command that allows to either compose or 
-          decompose LDAP URIs.{/para}
+          {para}
+            is a command that allows to either compose or 
+            decompose LDAP URIs.
+          {/para}
           {indexterm zone="openldap ldapurl"}
             {primary sortas="b-ldapurl"}ldapurl{/primary}
           {/indexterm}
@@ -492,8 +583,10 @@
       {varlistentry id="ldapwhoami"}
         {term}{command}ldapwhoami{/command}{/term}
         {listitem}
-          {para}opens a connection to an LDAP server, binds and displays
-          whoami information.{/para}
+          {para}
+            opens a connection to an LDAP server, binds and displays
+            whoami information.
+          {/para}
           {indexterm zone="openldap ldapwhoami"}
             {primary sortas="b-ldapwhoami"}ldapwhoami{/primary}
           {/indexterm}
@@ -503,9 +596,11 @@
       {varlistentry id="slapacl"}
         {term}{command}slapacl{/command}{/term}
         {listitem}
-          {para}is used to check the behavior of slapd by verifying 
-          access to directory data according to the access control 
-          list directives defined in its configuration.{/para}
+          {para}
+            is used to check the behavior of slapd by verifying 
+            access to directory data according to the access control 
+            list directives defined in its configuration.
+          {/para}
           {indexterm zone="openldap slapacl"}
             {primary sortas="b-slapacl"}slapacl{/primary}
           {/indexterm}
@@ -515,8 +610,10 @@
       {varlistentry id="slapadd"}
         {term}{command}slapadd{/command}{/term}
         {listitem}
-          {para}is used to add entries specified in LDAP Directory Interchange
-          Format (LDIF) to an LDAP database.{/para}
+          {para}
+            is used to add entries specified in LDAP Directory Interchange
+            Format (LDIF) to an LDAP database.
+          {/para}
           {indexterm zone="openldap slapadd"}
             {primary sortas="b-slapadd"}slapadd{/primary}
           {/indexterm}
@@ -526,9 +623,11 @@
       {varlistentry id="slapauth"}
         {term}{command}slapauth{/command}{/term}
         {listitem}
-          {para}is used to check the behavior of the slapd 
-          in mapping identities for authentication  and
-          authorization purposes, as specified in slapd.conf.{/para}
+          {para}
+            is used to check the behavior of the slapd 
+            in mapping identities for authentication and
+            authorization purposes, as specified in slapd.conf.
+          {/para}
           {indexterm zone="openldap slapauth"}
             {primary sortas="b-slapauth"}slapauth{/primary}
           {/indexterm}
@@ -538,8 +637,10 @@
       {varlistentry id="slapcat"}
         {term}{command}slapcat{/command}{/term}
         {listitem}
-          {para}is used to generate an LDAP LDIF output based upon the
-          contents of a slapd database.{/para}
+          {para}
+            is used to generate an LDAP LDIF output based upon the
+            contents of a slapd database.
+          {/para}
           {indexterm zone="openldap slapcat"}
             {primary sortas="b-slapcat"}slapcat{/primary}
           {/indexterm}
@@ -549,7 +650,9 @@
       {varlistentry id="slapd"}
         {term}{command}slapd{/command}{/term}
         {listitem}
-          {para}is the stand-alone LDAP server.{/para}
+          {para}
+            is the standalone LDAP server.
+          {/para}
           {indexterm zone="openldap slapd"}
             {primary sortas="b-slapd"}slapd{/primary}
           {/indexterm}
@@ -559,8 +662,9 @@
       {varlistentry id="slapdn"}
         {term}{command}slapdn{/command}{/term}
         {listitem}
-          {para}checks a list of string-represented DNs based on schema
-          syntax.{/para}
+          {para}
+            checks a list of string-represented DNs based on schema syntax.
+          {/para}
           {indexterm zone="openldap slapdn"}
             {primary sortas="b-slapdn"}slapdn{/primary}
           {/indexterm}
@@ -570,8 +674,10 @@
       {varlistentry id="slapindex"}
         {term}{command}slapindex{/command}{/term}
         {listitem}
-          {para}is used to regenerate slapd indexes based upon the current
-          contents of a database.{/para}
+          {para}
+            is used to regenerate slapd indexes based upon the current
+            contents of a database.
+          {/para}
           {indexterm zone="openldap slapindex"}
             {primary sortas="b-slapindex"}slapindex{/primary}
           {/indexterm}
@@ -581,8 +687,9 @@
       {varlistentry id="slappasswd"}
         {term}{command}slappasswd{/command}{/term}
         {listitem}
-          {para}is an {application}OpenLDAP{/application} password
-          utility.{/para}
+          {para}
+            is an {application}OpenLDAP{/application} password utility.
+          {/para}
           {indexterm zone="openldap slappasswd"}
             {primary sortas="b-slappasswd"}slappasswd{/primary}
           {/indexterm}
@@ -592,8 +699,10 @@
       {varlistentry id="slapschema"}
         {term}{command}slapschema{/command}{/term}
         {listitem}
-          {para}is used to check schema compliance of the contents 
-          of a slapd database.{/para}
+          {para}
+            is used to check schema compliance of the contents 
+            of a slapd database.
+          {/para}
           {indexterm zone="openldap slapschema"}
             {primary sortas="b-slapschema"}slapschema{/primary}
           {/indexterm}
@@ -603,8 +712,9 @@
       {varlistentry id="slaptest"}
         {term}{command}slaptest{/command}{/term}
         {listitem}
-          {para}checks the sanity of the {filename}slapd.conf{/filename}
-          file.{/para}
+          {para}
+            checks the sanity of the {filename}slapd.conf{/filename} file.
+          {/para}
           {indexterm zone="openldap slaptest"}
             {primary sortas="b-slaptest"}slaptest{/primary}
           {/indexterm}
@@ -614,12 +724,14 @@
       {varlistentry id="liblber"}
         {term}{filename class='libraryfile'}liblber.so{/filename}{/term}
         {listitem}
-          {para}is a set of lightweight Basic Encoding Rules routines. These
-          routines are used by the LDAP library routines to encode and decode
-          LDAP protocol elements using the (slightly simplified) Basic
-          Encoding Rules defined by LDAP. They are not normally used directly
-          by an LDAP application program except in the handling of controls
-          and extended operations.{/para}
+          {para}
+            is a set of lightweight Basic Encoding Rules routines. These
+            routines are used by the LDAP library routines to encode and decode
+            LDAP protocol elements using the (slightly simplified) Basic
+            Encoding Rules defined by LDAP. They are not normally used directly
+            by an LDAP application program except in the handling of controls
+            and extended operations.
+          {/para}
           {indexterm zone="openldap liblber"}
             {primary sortas="c-liblber"}liblber.so{/primary}
           {/indexterm}
@@ -629,8 +741,10 @@
       {varlistentry id="libldap"}
         {term}{filename class='libraryfile'}libldap.so{/filename}{/term}
         {listitem}
-          {para}supports the LDAP programs and provide functionality for
-          other programs interacting with LDAP.{/para}
+          {para}
+            supports the LDAP programs and provide functionality for
+            other programs interacting with LDAP.
+          {/para}
           {indexterm zone="openldap libldap"}
             {primary sortas="c-libldap"}libldap.so{/primary}
           {/indexterm}
@@ -640,8 +754,10 @@
       {varlistentry id="libldap_r"}
         {term}{filename class='libraryfile'}libldap_r.so{/filename}{/term}
         {listitem}
-          {para}contains the functions required by the LDAP programs to
-          produce the results from LDAP requests.{/para}
+          {para}
+            contains the functions required by the LDAP programs to
+            produce the results from LDAP requests.
+          {/para}
           {indexterm zone="openldap libldap_r"}
             {primary sortas="c-libldap_r"}libldap_r.so{/primary}
           {/indexterm}




More information about the lfs-traducfr mailing list