[lfs-fr] [BLFS-EN] r10159

Robot myou72 at orange.fr
Ven 11 Mai 05:44:46 PDT 2012


Révision 10159

fichiers modifiés :
   introduction/welcome/changelog.xml
   general.ent
   TODO
   general/sysutils/udisks.xml
   general/genutils/graphviz.xml

Log :
graphviz 2.28.0 and udisks 1.0.4

Le robot a traité 0 % du commit anglais.

Index: TODO
===================================================================
--- TODO	(revision 10158)
+++ TODO	(revision 10159)
@@ -2,7 +2,6 @@
 
   * Upgrade:
 
-  * graphviz-2.28.0 (Don't forget to mark it as checked)
   * libdvdcss-1.2.12
   * libidn-1.24
   * lzo-2.06 (Low priority)
@@ -11,15 +10,9 @@
   * sg3_utils-1.33
   * tcl-8.5.11
   * tk-8.5.11
-  * udisks-1.0.4
   * unixODBC-2.3.1 (Don't forget to mark it as checked)
 
   * Check libdaemon-0.14
   * Check libmpeg3-1.8
   * Check libusb-compat-0.1.3
   * Check mod_dnssd-0.6
-
-  * Check the following if nobody does it:
-
-    * enchant-1.6.0
-    * libdv-1.0.0

Index: general.ent
===================================================================
--- general.ent	(revision 10158)
+++ general.ent	(revision 10159)
@@ -301,7 +301,7 @@
 {!ENTITY pilot-link-version           "0.12.2"}
 {!ENTITY unixodbc-version             "2.3.0"}
 {!ENTITY libiodbc-version             "3.52.7"}
-{!ENTITY graphviz-version             "2.26.3"}
+{!ENTITY graphviz-version             "2.28.0"}
 {!ENTITY recode-version               "3.6"}
 {!-- {!ENTITY rman-version                 "3.2"} --}
 {!ENTITY icon-naming-utils-version    "0.8.90"}
@@ -333,7 +333,7 @@
 {!ENTITY upower-version               "0.9.16"}
 {!ENTITY sg3_utils-version            "1.29"}
 {!ENTITY parted-version               "3.1"}
-{!ENTITY udisks-version               "1.0.1"}
+{!ENTITY udisks-version               "1.0.4"}
 {!ENTITY udisks2-version              "1.96.0"}
 {!ENTITY eject-version                "2.1.5"}
 {!ENTITY gvfs-version                 "1.12.2"}

Index: general/genutils/graphviz.xml
===================================================================
--- general/genutils/graphviz.xml	(revision 10158)
+++ general/genutils/graphviz.xml	(revision 10159)
@@ -5,11 +5,11 @@
   %general-entities;
 
   {!ENTITY graphviz-download-http "http://graphviz.org/pub/graphviz/stable/SOURCES/graphviz-&graphviz-version;.tar.gz"}
-  {!ENTITY graphviz-download-ftp  "&gentoo-ftp-repo;/graphviz-&graphviz-version;.tar.gz"}
-  {!ENTITY graphviz-md5sum        "6f45946fa622770c45609778c0a982ee"}
-  {!ENTITY graphviz-size          "17 MB"}
-  {!ENTITY graphviz-buildsize     "142 MB"}
-  {!ENTITY graphviz-time          "1.5 SBU"}
+  {!ENTITY graphviz-download-ftp  " "}
+  {!ENTITY graphviz-md5sum        "8d26c1171f30ca3b1dc1b429f7937e58"}
+  {!ENTITY graphviz-size          "19 MB"}
+  {!ENTITY graphviz-buildsize     "155 MB"}
+  {!ENTITY graphviz-time          "2.5 SBU"}
 ]}
 
 {sect1 id="graphviz" xreflabel="Graphviz-&graphviz-version;"}
@@ -29,103 +29,107 @@
   {sect2 role="package"}
     {title}Introduction to Graphviz{/title}
 
-    {para}The {application}Graphviz{/application} package contains graph
-    visualization software. Graph visualization is a way of representing
-    structural information as diagrams of abstract graphs and networks.
-    {application}Graphviz{/application} has several main graph layout
-    programs. It also has web and interactive graphical interfaces, auxiliary
-    tools, libraries, and language bindings.{/para}
+    {para}
+      The {application}Graphviz{/application} package contains graph
+      visualization software. Graph visualization is a way of representing
+      structural information as diagrams of abstract graphs and networks.
+      {application}Graphviz{/application} has several main graph layout
+      programs. It also has web and interactive graphical interfaces, auxiliary
+      tools, libraries, and language bindings.
+    {/para}
 
-    {para}The {application}Graphviz{/application} layout programs take
-    descriptions of graphs in a simple text language, and creates diagrams in
-    several useful formats such as images and SVG for web pages, Postscript for
-    inclusion in PDF or other documents, or as objects displayed in an
-    interactive graph browser. (Graphviz also supports GXL, an XML dialect.) In
-    practice, graphs are usually generated from external data sources, but they
-    can also be created and edited manually, either as raw text files or within
-    a graphical editor. (Graphviz was not intended to be a
-    {application}Visio{/application} replacement, so it would probably be
-    frustrating to try to use it that way.){/para}
+    &lfs70_checked;
 
-    {para}This package is useful for automatic graph drawing which has many
-    important applications in software engineering, database and web design,
-    networking, and in visual interfaces for many other domains. Graphviz has
-    many useful features for concrete diagrams, such as options for colors,
-    fonts, tabular node layouts, line styles, hyperlinks, and custom
-    shapes.{/para}
-
     {bridgehead renderas="sect3"}Package Information{/bridgehead}
     {itemizedlist spacing="compact"}
       {listitem}
-        {para}Download (HTTP): {ulink url="&graphviz-download-http;"/}{/para}
+        {para}
+          Download (HTTP): {ulink url="&graphviz-download-http;"/}
+        {/para}
       {/listitem}
       {listitem}
-        {para}Download (FTP): {ulink url="&graphviz-download-ftp;"/}{/para}
+        {para}
+          Download (FTP): {ulink url="&graphviz-download-ftp;"/}
+        {/para}
       {/listitem}
       {listitem}
-        {para}Download MD5 sum: &graphviz-md5sum;{/para}
+        {para}
+          Download MD5 sum: &graphviz-md5sum;
+        {/para}
       {/listitem}
       {listitem}
-        {para}Download size: &graphviz-size;{/para}
+        {para}
+          Download size: &graphviz-size;
+        {/para}
       {/listitem}
       {listitem}
-        {para}Estimated disk space required: &graphviz-buildsize;{/para}
+        {para}
+          Estimated disk space required: &graphviz-buildsize;
+        {/para}
       {/listitem}
       {listitem}
-        {para}Estimated build time: &graphviz-time;{/para}
+        {para}
+          Estimated build time: &graphviz-time;
+        {/para}
       {/listitem}
     {/itemizedlist}
 
-    {!-- {bridgehead renderas="sect3"}Additional Downloads{/bridgehead}
+    {bridgehead renderas="sect3"}Additional Downloads{/bridgehead}
     {itemizedlist spacing="compact"}
       {listitem}
-        {para}Required patch: {ulink
-        url="&patch-root;/graphviz-&graphviz-version;-gd_fixes-1.patch"/}{/para}
+        {para}
+          Required patch:
+          {ulink url="&patch-root;/graphviz-&graphviz-version;-fix-guile-detection-1.patch"/}
+        {/para}
       {/listitem}
-    {/itemizedlist} --}
+    {/itemizedlist}
 
     {bridgehead renderas="sect3"}Graphviz Dependencies{/bridgehead}
 
+    {bridgehead renderas="sect4"}Recommended{/bridgehead}
+    {para role="recommended"}
+      {xref linkend="expat"/},
+      {xref linkend="freetype2"/},
+      {xref linkend="fontconfig"/},
+      {xref linkend="freeglut"/},
+      {xref linkend="gdk-pixbuf"/},
+      {xref linkend="libjpeg"/},
+      {xref linkend="libpng"/},
+      {xref linkend="librsvg"/},
+      {xref linkend="pango"/} and
+      {xref linkend="xorg7-lib"/}
+    {/para}
+
     {bridgehead renderas="sect4"}Optional{/bridgehead}
-    {para role="optional"}{!-- {xref linkend="pkgconfig"/}, --}
-    {xref linkend="expat"/},
-    {xref linkend="freetype2"/},
-    {xref linkend="fontconfig"/},
-    {xref linkend="freeglut"/},
-    {xref linkend="libpng"/},
-    {xref linkend="x-window-system"/},
-    {xref linkend="pango"/} (built with {application}cairo{/application} support),
-    {xref linkend="gtk2"/},
-    {xref linkend="libglade"/},
-    {xref linkend="librsvg"/},
-    {xref linkend="gs"/},
-    {xref linkend="tcl"/},
-    {xref linkend="tk"/},
-    {ulink url="http://openil.sourceforge.net/projects.php"}DevIL{/ulink},
-    {ulink url="http://sourceforge.net/projects/lasi/"}libLASi{/ulink},
-    {ulink url="http://www.freedesktop.org/wiki/Software/glitz"}glitz{/ulink},
-    {ulink url="http://www.libgd.org/"}GD Library{/ulink},
-    {xref linkend="libjpeg"/} (only if using the internal source code copy
-    of the GD Library), and
-    {ulink url="http://www.perens.com/FreeSoftware/ElectricFence/"}Electric Fence{/ulink}{/para}
+    {para role="optional"}
+      {ulink url="http://openil.sourceforge.net/projects.php"}DevIL{/ulink},
+      {ulink url="http://www.perens.com/FreeSoftware/ElectricFence/"}Electric Fence{/ulink},
+      {xref linkend="libglade"/},
+      {ulink url="http://sourceforge.net/projects/lasi/"}libLASi{/ulink},
+      {ulink url="http://www.libgd.org/"}GD Library{/ulink},
+      {ulink url="http://www.freedesktop.org/wiki/Software/glitz"}glitz{/ulink},
+      {xref linkend="gs"/},
+      {xref linkend="gtk2"/} and
+      {xref linkend="qt4"/}
+    {/para}
 
-    {bridgehead renderas="sect4"}Optional
-    (to Build Language Bindings){/bridgehead}
-    {para role="optional"}{ulink url="http://www.swig.org/"}SWIG{/ulink}
-    ({application}SWIG{/application} must be installed or no bindings will be
-    built),
-    {xref linkend="guile"/},
-    {xref linkend="icedtea6"/}{!-- or {xref linkend="jdk"/}--},
-    {xref linkend="php"/},
-    {xref linkend="python2"/},
-    {xref linkend="ruby"/},
-    {xref linkend="tcl"/},
-    C# ({ulink url="http://www.southern-storm.com.au/portable_net.html"}DotGNU Portable.NET{/ulink}
-    or {ulink url="http://www.mono-project.com/Main_Page"}Mono{/ulink}),
-    {ulink url="http://www.iolanguage.com/about/"}Io{/ulink},
-    {ulink url="http://www.r-project.org/"}R{/ulink},
-    {ulink url="http://www.lua.org/"}Lua{/ulink}, and
-    {ulink url="http://caml.inria.fr/ocaml/index.en.html"}Objective Caml{/ulink}{/para}
+    {bridgehead renderas="sect4"}Optional (To Build Language Bindings){/bridgehead}
+    {para role="optional"}
+      {ulink url="http://www.swig.org/"}SWIG{/ulink}
+      ({application}SWIG{/application} must be installed or no bindings will be built),
+      {xref linkend="guile"/},
+      {xref linkend="icedtea6"/},
+      {ulink url="http://www.iolanguage.com/about/"}Io{/ulink},
+      {ulink url="http://www.lua.org/"}Lua{/ulink},
+      {ulink url="http://www.mono-project.com/Main_Page"}Mono{/ulink},
+      {ulink url="http://caml.inria.fr/ocaml/index.en.html"}Objective Caml{/ulink},
+      {xref linkend="php"/},
+      {xref linkend="python2"/},
+      {ulink url="http://www.r-project.org/"}R{/ulink},
+      {xref linkend="ruby"/},
+      {xref linkend="tcl"/} and
+      {xref linkend="tk"/}
+    {/para}
 
     {para condition="html" role="usernotes"}User Notes:
     {ulink url="&blfs-wiki;/graphviz"/}{/para}
@@ -135,24 +139,35 @@
   {sect2 role="installation"}
     {title}Installation of Graphviz{/title}
 
-    {para}Install {application}Graphviz{/application} by running the following
-    commands:{/para}
+    {para}
+      Install {application}Graphviz{/application} by running the following
+      commands:
+    {/para}
 
-{screen}{userinput}./configure --prefix=/usr &&
+{screen}{userinput}patch -Np1 -i ../graphviz-&graphviz-version;-fix-guile-detection-1.patch &&
+sed -e '/"archdir"/s:$:+" '"$(echo -I/usr/include/ruby-1.9.1/{`uname -m`-linux,ruby/backward,})"'":' \
+    -e '/CONFIG/s:site:vendor:' \
+    -i config/config_ruby.rb &&
+./configure --prefix=/usr CXXFLAGS="-fpermissive" &&
 make{/userinput}{/screen}
 
-    {para}This package does not come with a test suite that provides
-    meaningful results.{/para}
+    {para}
+      This package does not come with a test suite that provides meaningful results.
+    {/para}
 
-    {para}Now, as the {systemitem class="username"}root{/systemitem} user:{/para}
+    {para}
+      Now, as the {systemitem class="username"}root{/systemitem} user:
+    {/para}
 
 {screen role="root"}{userinput}make install{/userinput}{/screen}
 
-    {para}If desired, create a symbolic link in the system documents directory
-    to the documentation installed in
-    {filename class='directory'}/usr/share/graphviz/doc{/filename} using the
-    following command as the {systemitem class="username"}root{/systemitem}
-    user:{/para}
+    {para}
+      If desired, create a symbolic link in the system documents directory
+      to the documentation installed in
+      {filename class='directory'}/usr/share/graphviz/doc{/filename} using the
+      following command as the {systemitem class="username"}root{/systemitem}
+      user:
+    {/para}
 
 {screen role="root"}{userinput}ln -v -s /usr/share/graphviz/doc \
          /usr/share/doc/graphviz-&graphviz-version;{/userinput}{/screen}
@@ -172,17 +187,20 @@
 
     {/sect3}
 
-    {sect3}{title}Configuration Information{/title}
+    {sect3}
+      {title}Configuration Information{/title}
 
-      {para}There are no specific configuration requirements for
-      {application}Graphviz{/application}. You may consider installing the
-      additional plugins and tools available from the download page at
-      {ulink url="http://www.graphviz.org/Download_source.php"/} for additional
-      capabilities. If additional plugins are installed, you can run
-      {command}dot_static -c{/command} (as the
-      {systemitem class="username"}root{/systemitem} user) to update the
-      {filename}config{/filename} file in
-      {filename class='directory'}/usr/lib/graphviz{/filename}.{/para}
+      {para}
+        There are no specific configuration requirements for
+        {application}Graphviz{/application}. You may consider installing the
+        additional plugins and tools available from the download page at
+        {ulink url="http://www.graphviz.org/Download_source.php"/} for additional
+        capabilities. If additional plugins are installed, you can run
+        {command}dot -c{/command} (as the
+        {systemitem class="username"}root{/systemitem} user) to update the
+        {filename}config{/filename} file in
+        {filename class='directory'}/usr/lib/graphviz{/filename}.
+      {/para}
 
     {/sect3}
 
@@ -197,14 +215,21 @@
       {segtitle}Installed Directories{/segtitle}
 
       {seglistitem}
-        {seg}acyclic, bcomps, ccomps, circo, dijkstra, dot, dot2gxl,
-        dot_static, dotty, fdp, gc, gvcolor, gvpack, gvpr, gxl2dot, lefty,
-        lneato, nop, prune, sccmap, tred, twopi and unflatten{/seg}
-        {seg}libagraph.{so,a}, libcdt.{so,a}, libexpr.{so,a}, libgraph.{so,a},
-        libpack.{so,a}, libpathplan.{so,a}, additional support libraries
-        and language bindings{/seg}
-        {seg}/usr/include/graphviz, /usr/lib/graphviz and
-        /usr/share/graphviz{/seg}
+        {seg}
+          acyclic, bcomps, ccomps, circo, cluster, diffimg, dijkstra,
+          dot, dot2gxl, dot_builtins, dotty, fdp, gc, gml2gv, gv2gxl,
+          gvcolor, gvedit, gvgen, gvmap, gvmap.sh, gvpack, gvpr,
+          gxl2dot, gxl2gv, lefty, lneato, mm2gv, neato, nop, osage,
+          patchwork, prune, sccmap, sfdp, tred, twopi, unflatten and vimdot
+        {/seg}
+        {seg}
+          libcdt.so, libcgraph.so, libgraph.so, libgvc.so, libgvpr.so,
+          libpathplan.so and libxdot.so
+        {/seg}
+        {seg}
+          /usr/include/graphviz,
+          /usr/lib/graphviz and
+          /usr/share/graphviz{/seg}
       {/seglistitem}
     {/segmentedlist}
 
@@ -216,10 +241,11 @@
       {varlistentry id="acyclic"}
         {term}{command}acyclic{/command}{/term}
         {listitem}
-          {para}is a filter that takes a directed graph as input and outputs a
-          copy of the graph with sufficient edges reversed to make the graph
-          acyclic. The reversed edge inherits all of the attributes of the
-          original edge.{/para}
+          {para}
+            is a filter that takes a directed graph as input and outputs a
+            copy of the graph with sufficient edges reversed to make the 
+            graph acyclic.
+          {/para}
           {indexterm zone="graphviz acyclic"}
             {primary sortas="b-acyclic"}acyclic{/primary}
           {/indexterm}
@@ -229,8 +255,10 @@
       {varlistentry id="bcomps"}
         {term}{command}bcomps{/command}{/term}
         {listitem}
-          {para}decomposes graphs into their biconnected components, printing
-          the components to standard output.{/para}
+          {para}
+            decomposes graphs into their biconnected components, 
+            printing the components to standard output.
+          {/para}
           {indexterm zone="graphviz bcomps"}
             {primary sortas="b-bcomps"}bcomps{/primary}
           {/indexterm}
@@ -240,8 +268,10 @@
       {varlistentry id="ccomps"}
         {term}{command}ccomps{/command}{/term}
         {listitem}
-          {para}decomposes graphs into their connected components, printing the
-          components to standard output.{/para}
+          {para}
+            decomposes graphs into their connected components, 
+            printing the components to standard output.
+          {/para}
           {indexterm zone="graphviz ccomps"}
             {primary sortas="b-ccomps"}ccomps{/primary}
           {/indexterm}
@@ -251,24 +281,49 @@
       {varlistentry id="circo"}
         {term}{command}circo{/command}{/term}
         {listitem}
-          {para}draws graphs using a circular layout. The tool identifies
-          biconnected components and draws the nodes of the component on a
-          circle. The block-cutpoint tree is then laid out using a recursive
-          radial algorithm. Edge crossings within a circle are minimized by
-          placing as many edges on the circle's perimeter as possible. In
-          particular, if the component is outerplanar, the component will have
-          a planar layout.{/para}
+          {para}
+            draws graphs using a circular layout.
+          {/para}
           {indexterm zone="graphviz circo"}
             {primary sortas="b-circo"}circo{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}
 
+      {varlistentry id="cluster"}
+        {term}{command}cluster{/command}{/term}
+        {listitem}
+          {para}
+            takes as input a graph in DOT format, finds node clusters
+            and augments the graph with this information.
+          {/para}
+          {indexterm zone="graphviz cluster"}
+            {primary sortas="b-cluster"}cluster{/primary}
+          {/indexterm}
+        {/listitem}
+      {/varlistentry}
+
+      {varlistentry id="diffimg"}
+        {term}{command}diffimg{/command}{/term}
+        {listitem}
+          {para}
+            generates an image where each pixel is the 
+            difference between the corresponding pixel in 
+            each of the two source images.
+          {/para}
+          {indexterm zone="graphviz diffimg"}
+            {primary sortas="b-diffimg"}diffimg{/primary}
+          {/indexterm}
+        {/listitem}
+      {/varlistentry}
+
       {varlistentry id="dijkstra"}
         {term}{command}dijkstra{/command}{/term}
         {listitem}
-          {para}reads a stream of graphs and for each computes the distance of
-          every node from sourcenode.{/para}
+          {para}
+            reads a stream of graphs and for each computes the distance of
+            every node from sourcenode.
+          {/para}
           {indexterm zone="graphviz dijkstra"}
             {primary sortas="b-dijkstra"}dijkstra{/primary}
           {/indexterm}
@@ -278,10 +333,12 @@
       {varlistentry id="dot"}
         {term}{command}dot{/command}{/term}
         {listitem}
-          {para}draws directed graphs. It works well on DAGs and other graphs
-          that can be drawn as hierarchies. It reads attributed graph files and
-          writes drawings. By default, the output format dot is the input file
-          with layout coordinates appended.{/para}
+          {para}
+            draws directed graphs. It works well on DAGs and other graphs
+            that can be drawn as hierarchies. It reads attributed graph files and
+            writes drawings. By default, the output format dot is the input file
+            with layout coordinates appended.
+          {/para}
           {indexterm zone="graphviz dot"}
             {primary sortas="b-dot"}dot{/primary}
           {/indexterm}
@@ -291,39 +348,30 @@
       {varlistentry id="dot2gxl"}
         {term}{command}dot2gxl{/command}{/term}
         {listitem}
-          {para}converts between graphs represented in GXL and in the DOT
-          language. Unless a conversion type is specified using a flag,
-          {command}gxl2dot{/command} will deduce the type of conversion from
-          the suffix of the input file, a
-          {filename class='extension'}.dot{/filename} suffix causing a
-          conversion from DOT to GXL, and a
-          {filename class='extension'}.gxl{/filename} suffix causing a
-          conversion from GXL to DOT.{/para}
+          {para}
+            converts between graphs represented in GXL and in the DOT
+            language. Unless a conversion type is specified using a flag,
+            {command}gxl2dot{/command} will deduce the type of conversion from
+            the suffix of the input file, a
+            {filename class='extension'}.dot{/filename} suffix causing a
+            conversion from DOT to GXL, and a
+            {filename class='extension'}.gxl{/filename} suffix causing a
+            conversion from GXL to DOT.
+          {/para}
           {indexterm zone="graphviz dot2gxl"}
             {primary sortas="b-dot2gxl"}dot2gxl{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}
 
-      {varlistentry id="dot_static"}
-        {term}{command}dot_static{/command}{/term}
-        {listitem}
-          {para}is a version of {command}dot{/command}that has all the
-          {application}Graphviz{/application} libraries compiled
-          statically.{/para}
-          {indexterm zone="graphviz dot_static"}
-            {primary sortas="b-dot_static"}dot_static{/primary}
-          {/indexterm}
-        {/listitem}
-      {/varlistentry}
-
       {varlistentry id="dotty"}
         {term}{command}dotty{/command}{/term}
         {listitem}
-          {para}is a graph editor for the X Window System. It may be run as a
-          standalone editor, or as a front end for applications that use
-          graphs. It can control multiple windows viewing different
-          graphs.{/para}
+          {para}
+            is a graph editor for the X Window System. It may be run as a
+            standalone editor, or as a front end for applications that use
+            graphs. It can control multiple windows viewing different graphs.
+          {/para}
           {indexterm zone="graphviz dotty"}
             {primary sortas="b-dotty"}dotty{/primary}
           {/indexterm}
@@ -333,9 +381,11 @@
       {varlistentry id="fdp"}
         {term}{command}fdp{/command}{/term}
         {listitem}
-          {para}draws undirected graphs using a {quote}spring{/quote} model. It
-          relies on a force-directed approach in the spirit of Fruchterman and
-          Reingold.{/para}
+          {para}
+            draws undirected graphs using a {quote}spring{/quote} model. It
+            relies on a force-directed approach in the spirit of Fruchterman
+            and Reingold.
+          {/para}
           {indexterm zone="graphviz fdp"}
             {primary sortas="b-fdp"}fdp{/primary}
           {/indexterm}
@@ -345,36 +395,107 @@
       {varlistentry id="gc-graphviz"}
         {term}{command}gc{/command}{/term}
         {listitem}
-          {para}is a graph analogue to {command}wc{/command} in that it prints
-          to standard output the number of nodes, edges, connected components
-          or clusters contained in the input files. It also prints a total
-          count for all graphs if more than one graph is given.{/para}
+          {para}
+            is a graph analogue to {command}wc{/command} in that it prints
+            to standard output the number of nodes, edges, connected components
+            or clusters contained in the input files. It also prints a total
+            count for all graphs if more than one graph is given.
+          {/para}
           {indexterm zone="graphviz gc-graphviz"}
             {primary sortas="b-gc"}gc{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}
 
+      {varlistentry id="gml2gv"}
+        {term}{command}gml2gv{/command}{/term}
+        {listitem}
+          {para}
+            converts a graph specified in the GML format to 
+            a graph in the GV (formerly DOT) format.
+          {/para}
+          {indexterm zone="graphviz gml2gv"}
+            {primary sortas="b-gml2gv"}gml2gv{/primary}
+          {/indexterm}
+        {/listitem}
+      {/varlistentry}
+
+      {varlistentry id="gxl2gv"}
+        {term}{command}gxl2gv{/command}{/term}
+        {listitem}
+          {para}
+            converts between graphs represented in GXL and in 
+            the GV language.
+          {/para}
+          {indexterm zone="graphviz gxl2gv"}
+            {primary sortas="b-gxl2gv"}gxl2gv{/primary}
+          {/indexterm}
+        {/listitem}
+      {/varlistentry}
+
       {varlistentry id="gvcolor"}
         {term}{command}gvcolor{/command}{/term}
         {listitem}
-          {para}is a filter that sets node colors from initial seed values.
-          Colors flow along edges from tail to head, and are averaged (as HSB
-          vectors) at nodes.  The graph must already have  been  processed by
-          {command}dot{/command}.{/para}
+          {para}
+            is a filter that sets node colors from initial seed values.
+            Colors flow along edges from tail to head, and are averaged (as HSB
+            vectors) at nodes.
+          {/para}
           {indexterm zone="graphviz gvcolor"}
             {primary sortas="b-gvcolor"}gvcolor{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}
 
+      {varlistentry id="gvedit"}
+        {term}{command}gvedit{/command}{/term}
+        {listitem}
+          {para}
+            provides a simple graph editor and viewer. It allows many 
+            graphs to be viewed at the same time. The text of each
+            graph is displayed in its own text window.
+          {/para}
+          {indexterm zone="graphviz gvedit"}
+            {primary sortas="b-gvedit"}gvedit{/primary}
+          {/indexterm}
+        {/listitem}
+      {/varlistentry}
+
+      {varlistentry id="gvgen"}
+        {term}{command}gvgen{/command}{/term}
+        {listitem}
+          {para}
+            generates a variety of simple, regularly-structured 
+            abstract graphs.
+          {/para}
+          {indexterm zone="graphviz gvgen"}
+            {primary sortas="b-gvgen"}gvgen{/primary}
+          {/indexterm}
+        {/listitem}
+      {/varlistentry}
+
+      {varlistentry id="gvmap"}
+        {term}{command}gvmap{/command}{/term}
+        {listitem}
+          {para}
+            takes as input a graph in DOT format, finds node 
+            clusters and produces a rendering of the graph as 
+            a geographic-style map, with clusters highlighted,
+            in xdot format.
+          {/para}
+          {indexterm zone="graphviz gvmap"}
+            {primary sortas="b-gvmap"}gvmap{/primary}
+          {/indexterm}
+        {/listitem}
+      {/varlistentry}
+
       {varlistentry id="gvpack"}
         {term}{command}gvpack{/command}{/term}
         {listitem}
-          {para}reads in a stream of graphs, combines the graphs into a single
-          layout, and produces a single graph serving as the union of the input
-          graphs. The input graphs must be in {command}dot{/command} format, and
-          must have all necessary layout information.{/para}
+          {para}
+            reads in a stream of graphs, combines the graphs into a single layout, 
+            and produces a single graph serving as the union of the input graphs.
+          {/para}
           {indexterm zone="graphviz gvpack"}
             {primary sortas="b-gvpack"}gvpack{/primary}
           {/indexterm}
@@ -384,10 +505,12 @@
       {varlistentry id="gvpr"}
         {term}{command}gvpr{/command}{/term}
         {listitem}
-          {para}is a graph stream editor inspired by {command}awk{/command}. It
-          copies input graphs to its output, possibly transforming their
-          structure and attributes, creating new graphs, or printing arbitrary
-          information.{/para}
+          {para}
+            is a graph stream editor inspired by {command}awk{/command}. It
+            copies input graphs to its output, possibly transforming their
+            structure and attributes, creating new graphs, or printing arbitrary
+            information.
+          {/para}
           {indexterm zone="graphviz gvpr"}
             {primary sortas="b-gvpr"}gvpr{/primary}
           {/indexterm}
@@ -397,14 +520,16 @@
       {varlistentry id="gxl2dot"}
         {term}{command}gxl2dot{/command}{/term}
         {listitem}
-          {para}converts between graphs represented in GXL and in the DOT
-          language. Unless a conversion type is specified using a flag,
-          {command}gxl2dot{/command} will deduce the type of conversion from
-          the suffix of the input file, a
-          {filename class='extension'}.dot{/filename} suffix causing a
-          conversion from DOT to GXL, and a
-          {filename class='extension'}.gxl{/filename} suffix causing a
-          conversion from GXL to DOT.{/para}
+          {para}
+            converts between graphs represented in GXL and in the DOT
+            language. Unless a conversion type is specified using a flag,
+            {command}gxl2dot{/command} will deduce the type of conversion from
+            the suffix of the input file, a
+            {filename class='extension'}.dot{/filename} suffix causing a
+            conversion from DOT to GXL, and a
+            {filename class='extension'}.gxl{/filename} suffix causing a
+            conversion from GXL to DOT.
+          {/para}
           {indexterm zone="graphviz gxl2dot"}
             {primary sortas="b-gxl2dot"}gxl2dot{/primary}
           {/indexterm}
@@ -414,7 +539,9 @@
       {varlistentry id="lefty"}
         {term}{command}lefty{/command}{/term}
         {listitem}
-          {para}is a two-view graphics editor for technical pictures.{/para}
+          {para}
+            is a two-view graphics editor for technical pictures.
+          {/para}
           {indexterm zone="graphviz lefty"}
             {primary sortas="b-lefty"}lefty{/primary}
           {/indexterm}
@@ -424,38 +551,92 @@
       {varlistentry id="lneato"}
         {term}{command}lneato{/command}{/term}
         {listitem}
-          {para}is a graph editor for the X Window System. It may be run as a
-          standalone editor, or as a front end for applications that use
-          graphs. It can control multiple windows viewing different
-          graphs.{/para}
+          {para}
+            is a graph editor for the X Window System. It may be run as a
+            standalone editor, or as a front end for applications that use
+            graphs. It can control multiple windows viewing different graphs.
+          {/para}
           {indexterm zone="graphviz lneato"}
             {primary sortas="b-lneato"}lneato{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}
 
+      {varlistentry id="mm2gv"}
+        {term}{command}mm2gv{/command}{/term}
+        {listitem}
+          {para}
+            converts a sparse matrix of the Matrix Market format
+            to a graph in the GV (formerly DOT) format.
+          {/para}
+          {indexterm zone="graphviz mm2gv"}
+            {primary sortas="b-mm2gv"}mm2gv{/primary}
+          {/indexterm}
+        {/listitem}
+      {/varlistentry}
+
+      {varlistentry id="neato"}
+        {term}{command}neato{/command}{/term}
+        {listitem}
+          {para}
+            draws undirected graphs using {quote}spring{/quote} models. Input 
+            files must be formatted in the {command}dot{/command}  attributed
+            graph language. By default, the output of {command}neato{/command} 
+            is the input graph with layout coordinates appended.
+          {/para}
+          {indexterm zone="graphviz neato"}
+            {primary sortas="b-neato"}neato{/primary}
+          {/indexterm}
+        {/listitem}
+      {/varlistentry}
+
       {varlistentry id="nop"}
         {term}{command}nop{/command}{/term}
         {listitem}
-          {para}reads a stream of graphs and prints each in pretty-printed
-          (canonical) format on stdout. If no files are given, it reads from
-          stdin.{/para}
+          {para}
+            reads a stream of graphs and prints each in pretty-printed (canonical) 
+            format on stdout. If no files are given, it reads from stdin.
+          {/para}
           {indexterm zone="graphviz nop"}
             {primary sortas="b-nop"}nop{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}
 
+      {varlistentry id="osage"}
+        {term}{command}osage{/command}{/term}
+        {listitem}
+          {para}
+            draws clustered graphs. As input, it takes any 
+            graph in the DOT format.
+          {/para}
+          {indexterm zone="graphviz osage"}
+            {primary sortas="b-osage"}osage{/primary}
+          {/indexterm}
+        {/listitem}
+      {/varlistentry}
+
+      {varlistentry id="patchwork"}
+        {term}{command}patchwork{/command}{/term}
+        {listitem}
+          {para}
+            draws clustered graphs using a squarified treemap layout. 
+            As input, it takes any graph in the DOT format.
+          {/para}
+          {indexterm zone="graphviz patchwork"}
+            {primary sortas="b-patchwork"}patchwork{/primary}
+          {/indexterm}
+        {/listitem}
+      {/varlistentry}
+
       {varlistentry id="prune"}
         {term}{command}prune{/command}{/term}
         {listitem}
-          {para}reads directed graphs in the same format used by
-          {command}dot{/command} and removes subgraphs rooted at nodes
-          specified on the command line via options. These nodes themselves
-          will not be removed, but can be given attributes so that they can be
-          easily located by a graph stream editor such as
-          {command}gpr{/command}. {command}prune{/command} correctly handles
-          cycles, loops and multi-edges.{/para}
+          {para}
+            reads directed graphs in the same format used by
+            {command}dot{/command} and removes subgraphs rooted at nodes
+            specified on the command line via options.
+          {/para}
           {indexterm zone="graphviz prune"}
             {primary sortas="b-prune"}prune{/primary}
           {/indexterm}
@@ -465,29 +646,41 @@
       {varlistentry id="sccmap"}
         {term}{command}sccmap{/command}{/term}
         {listitem}
-          {para}decomposes digraphs into strongly connected components and an
-          auxiliary map of the relationship between components. In this map,
-          each component is collapsed into a node. The resulting graphs are
-          printed to standard out. The number of nodes, edges and strongly
-          connected components are printed to standard error.
-          {command}sccmap{/command} is a way of partitioning large graphs into
-          more manageable pieces.{/para}
+          {para}
+            decomposes digraphs into strongly connected components and an
+            auxiliary map of the relationship between components. In this map,
+            each component is collapsed into a node. The resulting graphs are
+            printed to stdout.
+          {/para}
           {indexterm zone="graphviz sccmap"}
             {primary sortas="b-sccmap"}sccmap{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}
 
+      {varlistentry id="sfdp"}
+        {term}{command}sfdp{/command}{/term}
+        {listitem}
+          {para}
+            draws undirected graphs using the {quote}spring{/quote} model, 
+            but it uses a multi-scale approach to produce layouts of large
+            graphs in a reasonably short time.
+          {/para}
+          {indexterm zone="graphviz sfdp"}
+            {primary sortas="b-sfdp"}sfdp{/primary}
+          {/indexterm}
+        {/listitem}
+      {/varlistentry}
+
       {varlistentry id="tred"}
         {term}{command}tred{/command}{/term}
         {listitem}
-          {para}computes the transitive reduction of directed graphs, and
-          prints the resulting graphs to standard output. This removes edges
-          implied by transitivity. Nodes and subgraphs are not otherwise
-          affected.  The {quote}meaning{/quote} and validity of the reduced
-          graphs is application dependent. {command}tred{/command} is
-          particularly useful as a preprocessor to {command}dot{/command} to
-          reduce clutter in dense layouts.{/para}
+          {para}
+            computes the transitive reduction of directed graphs, and
+            prints the resulting graphs to standard output. This removes edges
+            implied by transitivity. Nodes and subgraphs are not otherwise
+            affected.
+          {/para}
           {indexterm zone="graphviz tred"}
             {primary sortas="b-tred"}tred{/primary}
           {/indexterm}
@@ -497,10 +690,12 @@
       {varlistentry id="twopi"}
         {term}{command}twopi{/command}{/term}
         {listitem}
-          {para}draws graphs using a radial layout. Basically, one node is
-          chosen as the center and put at the origin. The remaining nodes are
-          placed on a sequence of concentric circles centered about the origin,
-          each a fixed radial distance from the previous circle.{/para}
+          {para}
+            draws graphs using a radial layout. Basically, one node is
+            chosen as the center and put at the origin. The remaining nodes are
+            placed on a sequence of concentric circles centered about the origin,
+            each a fixed radial distance from the previous circle.
+          {/para}
           {indexterm zone="graphviz twopi"}
             {primary sortas="b-twopi"}twopi{/primary}
           {/indexterm}
@@ -510,101 +705,113 @@
       {varlistentry id="unflatten"}
         {term}{command}unflatten{/command}{/term}
         {listitem}
-          {para}is a preprocessor to {command}dot{/command} that is used to
-          improve the aspect ratio of graphs having many leaves or disconnected
-          nodes. The usual layout for such a graph is generally very wide or
-          tall. {command}unflatten{/command} inserts invisible edges or adjusts
-          the minlen on edges to improve layout compaction.{/para}
+          {para}
+            is a preprocessor to {command}dot{/command} that is used to
+            improve the aspect ratio of graphs having many leaves or disconnected
+            nodes. The usual layout for such a graph is generally very wide or tall.
+          {/para}
           {indexterm zone="graphviz unflatten"}
             {primary sortas="b-unflatten"}unflatten{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}
 
-      {varlistentry id="libagraph"}
-        {term}{filename class='libraryfile'}libagraph.{so,a}{/filename}{/term}
+      {varlistentry id="vimdot"}
+        {term}{command}vimdot{/command}{/term}
         {listitem}
-          {para}supports graph programming by maintaining graphs in memory and
-          reading and writing graph files. Graphs, nodes and edges may be
-          attributed with programmer-defined records and string name-value
-          pairs. Graphs are composed of nodes, edges, and nested subgraphs.
-          Internally, {filename class='libraryfile'}libagraph{/filename}
-          depends extensively on
-          {filename class='libraryfile'}libcdt{/filename} (formerly
-          {filename class='libraryfile'}libdict{/filename}) for set
-          representation.{/para}
-          {indexterm zone="graphviz libagraph"}
-            {primary sortas="c-libagraph"}libagraph.{so,a}{/primary}
+          {para}
+            is a simple script which launches the {command}gvim{/command}
+            or {command}vim{/command} editor along with a GUI window 
+            showing the {command}dot{/command} output of the edited file.
+          {/para}
+          {indexterm zone="graphviz vimdot"}
+            {primary sortas="b-vimdot"}vimdot{/primary}
           {/indexterm}
         {/listitem}
-      {/varlistentry}
+      {/varlistentry} 
 
       {varlistentry id="libcdt"}
-        {term}{filename class='libraryfile'}libcdt.{so,a}{/filename}{/term}
+        {term}{filename class='libraryfile'}libcdt.so{/filename}{/term}
         {listitem}
-          {para}manages run-time dictionaries using standard container data
-          types: unordered set/multiset, ordered set/multiset, list, stack,
-          and queue.{/para}
+          {para}
+            manages run-time dictionaries using standard container data
+            types: unordered set/multiset, ordered set/multiset, list, stack,
+            and queue.
+          {/para}
           {indexterm zone="graphviz libcdt"}
-            {primary sortas="c-libcdt"}libcdt.{so,a}{/primary}
+            {primary sortas="c-libcdt"}libcdt.so{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}
 
-      {varlistentry id="libexpr"}
-        {term}{filename class='libraryfile'}libexpr.{so,a}{/filename}{/term}
+      {varlistentry id="libcgraph"}
+        {term}{filename class='libraryfile'}libcgraph.so{/filename}{/term}
         {listitem}
-          {para}is a C-like expression library.{/para}
-          {indexterm zone="graphviz libexpr"}
-            {primary sortas="c-libexpr"}libexpr.{so,a}{/primary}
+          {para}
+            supports graph programming by maintaining graphs in memory and 
+            reading and writing graph files. Graphs are composed of nodes,
+            edges, and nested subgraphs.
+          {/para}
+          {indexterm zone="graphviz libcgraph"}
+            {primary sortas="c-libcgraph"}libcgraph.so{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}
 
       {varlistentry id="libgraph"}
-        {term}{filename class='libraryfile'}libgraph.{so,a}{/filename}{/term}
+        {term}{filename class='libraryfile'}libgraph.so{/filename}{/term}
         {listitem}
-          {para}maintains directed and undirected attributed graphs in memory
-          and reads and writes graph files. Graphs are composed of nodes,
-          edges, and nested subgraphs. A subgraph may contain any nodes and
-          edges of its parents, and may be passed to any
-          {filename class='libraryfile'}libgraph{/filename} function taking a
-          graph pointer, except the three that create new attributes (where a
-          main graph is required).{/para}
+          {para}
+            maintains directed and undirected attributed graphs in memory
+            and reads and writes graph files. Graphs are composed of nodes,
+            edges, and nested subgraphs.
+          {/para}
           {indexterm zone="graphviz libgraph"}
-            {primary sortas="c-libgraph"}libgraph.{so,a}{/primary}
+            {primary sortas="c-libgraph"}libgraph.so{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}
 
-      {varlistentry id="libpack"}
-        {term}{filename class='libraryfile'}libpack.{so,a}{/filename}{/term}
+      {varlistentry id="libgvc"}
+        {term}{filename class='libraryfile'}libgvc.so{/filename}{/term}
         {listitem}
-          {para}supports the use of connected components in the context of
-          laying out graphs using other {application}Graphviz{/application}
-          libraries. One set of functions can be used to take a single graph
-          and break it apart into connected components. A complementary set of
-          functions takes a collection of graphs (not necessarily components of
-          a single graph) which  have been laid out separately, and packs them
-          together moderately tightly. The packing is done using the polyomino
-          algorithm of K. Freivalds et al.{/para}
-          {indexterm zone="graphviz libpack"}
-            {primary sortas="c-libpack"}libpack.{so,a}{/primary}
+          {para}
+            provides a context for applications wishing to manipulate
+            and render graphs. It provides a command line parsing, 
+            common rendering code, and a plugin mechanism for renderers.
+          {/para}
+          {indexterm zone="graphviz libgvc"}
+            {primary sortas="c-libgvc"}libgvc.so{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}
 
       {varlistentry id="libpathplan"}
-        {term}{filename class='libraryfile'}libpathplan.{so,a}{/filename}{/term}
+        {term}{filename class='libraryfile'}libpathplan.so{/filename}{/term}
         {listitem}
-          {para}contains functions to find the shortest path between two points
-          in a simple polygon.{/para}
+          {para}
+            contains functions to find the shortest path between two points
+            in a simple polygon.
+          {/para}
           {indexterm zone="graphviz libpathplan"}
-            {primary sortas="c-libpathplan"}libpathplan.{so,a}{/primary}
+            {primary sortas="c-libpathplan"}libpathplan.so{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}
 
+      {varlistentry id="libxdot"}
+        {term}{filename class='libraryfile'}libxdot.so{/filename}{/term}
+        {listitem}
+          {para}
+            provides support for parsing and deparsing graphical 
+            operations specificed by the xdot language.
+          {/para}
+          {indexterm zone="graphviz libxdot"}
+            {primary sortas="c-libxdot"}libxdot.so{/primary}
+          {/indexterm}
+        {/listitem}
+      {/varlistentry}
+
     {/variablelist}
 
   {/sect2}

Index: general/sysutils/udisks.xml
===================================================================
--- general/sysutils/udisks.xml	(revision 10158)
+++ general/sysutils/udisks.xml	(revision 10159)
@@ -4,15 +4,15 @@
   {!ENTITY % general-entities SYSTEM "../../general.ent"}
   %general-entities;
 
-  {!ENTITY udisks-download-http "http://hal.freedesktop.org/releases/udisks-1.0.1.tar.gz"}
+  {!ENTITY udisks-download-http "http://hal.freedesktop.org/releases/udisks-&udisks-version;.tar.gz"}
   {!ENTITY udisks-download-ftp  " "}
-  {!ENTITY udisks-md5sum        "3654d994eb43b80c8c2d04fe03da30c4"}
-  {!ENTITY udisks-size          "698 MB"}
-  {!ENTITY udisks-buildsize     "10 MB"}
-  {!ENTITY udisks-time          "0.2 SBU"}
+  {!ENTITY udisks-md5sum        "86c63b2b5484f2060499a052b5b6256b"}
+  {!ENTITY udisks-size          "704 KB"}
+  {!ENTITY udisks-buildsize     "12 MB"}
+  {!ENTITY udisks-time          "0.4 SBU"}
 ]}
 
-{sect1 id="udisks" xreflabel="udisks-&udisks-version;"}
+{sect1 id="udisks" xreflabel="UDisks-&udisks-version;"}
   {?dbhtml filename="udisks.html"?}
 
   {sect1info}
@@ -20,56 +20,75 @@
     {date}$Date${/date}
   {/sect1info}
 
-  {title}udisks-&udisks-version;{/title}
+  {title}UDisks-&udisks-version;{/title}
 
   {indexterm zone="udisks"}
     {primary sortas="a-udisks"}udisks{/primary}
   {/indexterm}
 
   {sect2 role="package"}
-    {title}Introduction to udisks{/title}
+    {title}Introduction to UDisks{/title}
 
-    {para}The {application}udisks{/application} package is a daemon that provide
-    interfaces to obtain information and perform operations on storage
-    devices.{/para}
+    {para}
+      The {application}UDisks{/application} package provides a
+      storage daemon that implements well-defined D-Bus interfaces
+      that can be used to query and manipulate storage devices.
+    {/para}
 
-    &lfs70_built;
+    &lfs70_checked;
 
     {bridgehead renderas="sect3"}Package Information{/bridgehead}
     {itemizedlist spacing="compact"}
       {listitem}
-        {para}Download (HTTP): {ulink url="&udisks-download-http;"/}{/para}
+        {para}
+          Download (HTTP): {ulink url="&udisks-download-http;"/}
+        {/para}
       {/listitem}
       {listitem}
-        {para}Download (FTP): {ulink url="&udisks-download-ftp;"/}{/para}
+        {para}
+          Download (FTP): {ulink url="&udisks-download-ftp;"/}
+        {/para}
       {/listitem}
       {listitem}
-        {para}Download MD5 sum: &udisks-md5sum;{/para}
+        {para}
+          Download MD5 sum: &udisks-md5sum;
+        {/para}
       {/listitem}
       {listitem}
-        {para}Download size: &udisks-size;{/para}
+        {para}
+          Download size: &udisks-size;
+        {/para}
       {/listitem}
       {listitem}
-        {para}Estimated disk space required: &udisks-buildsize;{/para}
+        {para}
+          Estimated disk space required: &udisks-buildsize;
+        {/para}
       {/listitem}
       {listitem}
-        {para}Estimated build time: &udisks-time;{/para}
+        {para}
+          Estimated build time: &udisks-time;
+        {/para}
       {/listitem}
     {/itemizedlist}
 
     {bridgehead renderas="sect3"}udisks Dependencies{/bridgehead}
 
     {bridgehead renderas="sect4"}Required{/bridgehead}
-    {para role="required"}{xref linkend="dbus-glib"/},
-    {xref linkend="libatasmart"/},
-    {xref linkend="parted"/} (with {xref linkend="lvm2"/}, device-mapper),
-    {xref linkend="polkit"/},
-    {xref linkend="sg3_utils"/}, and
-    {xref linkend="udev"/} (gudev){/para}
+    {para role="required"}
+      {xref linkend="dbus-glib"/},
+      {xref linkend="libatasmart"/},
+      {xref linkend="lvm2"/},
+      {xref linkend="parted"/},
+      {xref linkend="polkit"/},
+      {xref linkend="sg3_utils"/} and
+      {xref linkend="udev"/}
+    {/para}
 
     {bridgehead renderas="sect4"}Optional{/bridgehead}
-    {para role="optional"}{xref linkend="gtk-doc"/} and
-    {xref linkend="sudo"/} (to run the test){/para}
+    {para role="optional"}
+      {xref linkend="gtk-doc"/} and
+      {xref linkend="sudo"/} (to run the test)
+    {/para}
 
     {para condition="html" role="usernotes"}User Notes:
     {ulink url="&blfs-wiki;/udisks"/}{/para}
@@ -77,20 +96,26 @@
   {/sect2}
 
   {sect2 role="installation"}
-    {title}Installation of udisks{/title}
+    {title}Installation of UDisks{/title}
 
-    {para}Install {application}udisks{/application} by running the following
-    commands:{/para}
+    {para}
+      Install {application}UDisks{/application} by running the following
+      commands:
+    {/para}
 
 {screen}{userinput}./configure --prefix=/usr \
             --sysconfdir=/etc \
-            --libexecdir=/usr/lib/udisks \
-            --localstatedir=/var &&
+            --localstatedir=/var \
+            --libexecdir=/usr/lib/udisks &&
 make{/userinput}{/screen}
 
-    {para}To test the results, issue: {command}make check{/command}.{/para}
+    {para}
+      To test the results, issue: {command}make check{/command}.
+    {/para}
 
-    {para}Now, as the {systemitem class="username"}root{/systemitem} user:{/para}
+    {para}
+      Now, as the {systemitem class="username"}root{/systemitem} user:
+    {/para}
 
 {screen role="root"}{userinput}make install{/userinput}{/screen}
 
@@ -102,9 +127,6 @@
    {xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
     href="../../xincludes/gtk-doc-rebuild.xml"/}
 
-    {para}{option}--enable-static=no{/option}: This switch prevents the static
-    libraries being installed.{/para}
-
   {/sect2}
 
   {sect2 role="content"}
@@ -112,23 +134,18 @@
 
     {segmentedlist}
       {segtitle}Installed Programs{/segtitle}
-      {segtitle}Installed Library{/segtitle}
       {segtitle}Installed Directories{/segtitle}
 
       {seglistitem}
-        {seg}udisks-dm-export, udisks-part-id, udisks-probe-ata-smart,
-        udisks-probe-sas-expander, umount.udisks, udisks, udisks-tcp-bridge,
-        udisks-daemon, udisks-helper-ata-smart-collect,
-        udisks-helper-ata-smart-selftest, udisks-helper-change-filesystem-label,
-        udisks-helper-change-luks-password, udisks-helper-create-partition,
-        udisks-helper-create-partition-table, udisks-helper-delete-partition,
-        udisks-helper-drive-benchmark, udisks-helper-drive-detach,
-        udisks-helper-drive-poll, udisks-helper-fstab-mounter,
-        udisks-helper-linux-md-check, udisks-helper-linux-md-remove-component,
-        udisks-helper-mdadm-expand, udisks-helper-mkfs, and
-        udisks-helper-modify-partition{/seg}
-        {seg}libudisks-action-lookup.{so,a}{/seg}
-        {seg}/usr/lib/udisks, /var/{lib/udisks,run/udisks}{/seg}
+        {seg}
+          udisks, udisks-daemon, udisks-tcp-bridge and
+          umount.udisks
+        {/seg}
+        {seg} 
+          /usr/lib/udisks,
+          /usr/share/gtk-doc/html/udisks and
+          /var/lib/udisks
+        {/seg}
       {/seglistitem}
     {/segmentedlist}
 
@@ -140,7 +157,10 @@
       {varlistentry id="udisks-prog"}
         {term}{command}udisks{/command}{/term}
         {listitem}
-          {para}is a command line tool.{/para}
+          {para}
+            is a simple command line interface for the 
+            {application}UDisks{/application} Daemon.
+          {/para}
           {indexterm zone="udisks udisks-prog"}
             {primary sortas="b-udisks"}udisks{/primary}
           {/indexterm}
@@ -150,7 +170,9 @@
       {varlistentry id="udisks-tcp-bridge"}
         {term}{command}udisks-tcp-bridge{/command}{/term}
         {listitem}
-          {para}is a {application}udisks{/application} TCP/IP bridge.{/para}
+          {para}
+            is the {application}UDisks{/application} TCP/IP bridge.
+          {/para}
           {indexterm zone="udisks udisks-tcp-bridge"}
             {primary sortas="b-udisks-tcp-bridge"}udisks-tcp-bridge{/primary}
           {/indexterm}
@@ -160,23 +182,15 @@
       {varlistentry id="udisks-daemon"}
         {term}{command}udisks-daemon{/command}{/term}
         {listitem}
-          {para}is the {application}udisks{/application} Daemon.{/para}
+          {para}
+            is the {application}UDisks{/application} Daemon.
+          {/para}
           {indexterm zone="udisks udisks-daemon"}
             {primary sortas="b-udisks-daemon"}udisks-daemon{/primary}
           {/indexterm}
         {/listitem}
       {/varlistentry}
 
-      {varlistentry id="libudisks-action-lookup"}
-        {term}{filename class='libraryfile'}libudisks-action-lookup.{so,a}{/filename}{/term}
-        {listitem}
-          {para}is a {application}polkit{/application} extension.{/para}
-          {indexterm zone="udisks libudisks-action-lookup"}
-            {primary sortas="c-libudisks-action-lookup"}libudisks-action-lookup.{so,a}{/primary}
-          {/indexterm}
-        {/listitem}
-      {/varlistentry}
-
     {/variablelist}
 
   {/sect2}

Index: introduction/welcome/changelog.xml
===================================================================
--- introduction/welcome/changelog.xml	(revision 10158)
+++ introduction/welcome/changelog.xml	(revision 10159)
@@ -63,6 +63,12 @@
         {listitem}
           {para}[ken] - Updated fetchmail to 6.3.21.{/para}
         {/listitem}
+        {listitem}
+          {para}[krejzi] - Graphviz 2.28.0.{/para}
+        {/listitem}
+        {listitem}
+          {para}[krejzi] - UDisks 1.0.4.{/para}
+        {/listitem}
       {/itemizedlist}
     {/listitem}
 




More information about the lfs-traducfr mailing list