GCC patch repository???

Damien Dye damien at madwire.co.uk
Sun Feb 17 10:02:44 PST 2002


----- Original Message -----
From: "Chad Campbell" <chad.d.campbell at mail.sprint.com>
To: <lfs-dev at linuxfromscratch.org>
Sent: Sunday, February 17, 2002 4:40 PM
Subject: GCC patch repository???


> Hi all - my current go of LFS on the Alpha has been very successful - X,
> telnet, ncftp, lynx, and iptables work great.  I only had 1 compile
> problem - and I get unaligned traps with ping - although it still works.
> The only thing that has totally bombed is KDE.  I get a segfault in
> klauncher that apparently then causes a segfault in ksplash.  The
backtrace
> shows it occurs in waitpid.  I don't want to try fixing that problem until
> I'm sure that everything KDE depends on is compiled w/debug and -mieee, so
> I'm going back and adding those options to binutils, gcc, and glibc.  I'm
> also going to try getting all the patches to work that are part of LFS
3.1.
> Anyway - here is the problem that I get when compiling the patched
> gcc-2.95.3:
>
> ../../gcc-2.95.3/gcc/config/alpha/crtbegin.asm: Assembler messages:
> ../../gcc-2.95.3/gcc/config/alpha/crtbegin.asm:118: Error: Symbol
> __dso_handle already defined.

Snap, This occures with my alpha too.
however it doesn't with gcc3.0.3 but then again that will not build anything
afterwards.

>
> Any help on that particular error would be appreciated.  On a more general
> note, does anyone know of a repository of GCC patches?  I have been
> searching, but I can't seem to find any such thing.  I'm considering
> extracting all the Alpha related patches from the RedHat gcc SRPM, but I'd
> rather find something that is not related to a particular distro.
>
> Thanks,
>
> Chad
>
> ----- Original Message -----
> From: <damien at madwire.co.uk>
> To: <lfs-dev at linuxfromscratch.org>
> Sent: Saturday, February 16, 2002 7:34 AM
> Subject: Re: Alpha owners
>
>
> Thanks. That like is what I have been looking for now for a month
> That should keep me going for a few days.
>
> Thanks
> Damien Dye
>
> ----- Original Message -----
> From: <chad.d.campbell at mail.sprint.com>
> To: <lfs-dev at linuxfromscratch.org>
> Sent: Friday, February 15, 2002 3:29 PM
> Subject: RE: Alpha owners
>
>
> > Oh - and your PC164LX manuals can be found by going to
> > http://www.alphaoem.com and selecting the technical support page.
> >
> > Chad
> >
> > -----Original Message-----
> > From: chad.d.campbell [mailto:chad.d.campbell at mail.sprint.com]
> > Sent: Friday, February 15, 2002 9:21 AM
> > To: lfs-dev
> > Subject: RE: Alpha owners
> >
> >
> > I would recommend scrapping your MILO and AlphaBIOS setup for SRM and
> > ABoot.  I did that a few months ago and it has made things much easier.
> >
> > Since alphalinux.org has had network issues for months, try these for
> > more info:
> >
> > http://www.compaq.com/alphaserver/linux
> > ftp://ftp.digital.com/pub/Digital/Alpha
> >
> > Your 164LX firmware is at:
> >
> >
ftp://ftp.digital.com/pub/Digital/Alpha/firmware/readmes/alphapc164lx.html
> >
> > There is an SRM howto at:
> >
> > http://www.linuxdoc.org/HOWTO/SRM-HOWTO/index.html
> >
> > Chad
> >
> >
> > -----Original Message-----
> > From: damien [mailto:damien at madwire.co.uk]
> > Sent: Thursday, February 14, 2002 6:18 PM
> > To: lfs-dev
> > Subject: Re: Alpha owners
> >
> >
> > my system is a 164lx and I don't have the motherboard manuals so I don't
> > know if that jumper is present, I got my board second hand from uni of
> > Edinburgh UK and they didn't have the manuals.
> >
> > ----- Original Message -----
> > From: <jsmaby at virgo.umeche.maine.edu>
> > To: <lfs-dev at linuxfromscratch.org>
> > Sent: Friday, February 15, 2002 12:03 AM
> > Subject: Re: Alpha owners
> >
> >
> > > > I am not able to configure the flash ram and I am scared of breaking
> >
> > it
> > > > How do you do it ?
> > >
> > > There are just settings that should be saved after you exit bios.
> > > We're probably talking about different systems though.  I have
> > > a 164SX.  If that's what you also have, don't worry about frying
> > > bios because there's a fallback (jumpered on the motherboard)
> > > that you can enter to reflash it.
> > > --
> > > Unsubscribe: send email to listar at linuxfromscratch.org
> > > and put 'unsubscribe lfs-dev' in the subject header of the message
> > >
> > >
> >
> >
> > --
> > Unsubscribe: send email to listar at linuxfromscratch.org
> > and put 'unsubscribe lfs-dev' in the subject header of the message
> >
> >
> > --
> > Unsubscribe: send email to listar at linuxfromscratch.org
> > and put 'unsubscribe lfs-dev' in the subject header of the message
> >
> >
> > --
> > Unsubscribe: send email to listar at linuxfromscratch.org
> > and put 'unsubscribe lfs-dev' in the subject header of the message
> >
> >
>
>
> --
> Unsubscribe: send email to listar at linuxfromscratch.org
> and put 'unsubscribe lfs-dev' in the subject header of the message
>
>
>
> --
> Unsubscribe: send email to listar at linuxfromscratch.org
> and put 'unsubscribe lfs-dev' in the subject header of the message
>
>


-- 
Unsubscribe: send email to listar at linuxfromscratch.org
and put 'unsubscribe lfs-dev' in the subject header of the message



More information about the lfs-dev mailing list