r7360 - in branches/alphabetical/BOOK: . chapter06 stylesheets

manuel at linuxfromscratch.org manuel at linuxfromscratch.org
Mon Feb 6 12:57:31 PST 2006


Author: manuel
Date: 2006-02-06 13:57:27 -0700 (Mon, 06 Feb 2006)
New Revision: 7360

Modified:
   branches/alphabetical/BOOK/chapter06/man-db.xml
   branches/alphabetical/BOOK/chapter06/man-pages.xml
   branches/alphabetical/BOOK/chapter06/mktemp.xml
   branches/alphabetical/BOOK/chapter06/module-init-tools.xml
   branches/alphabetical/BOOK/chapter06/ncurses.xml
   branches/alphabetical/BOOK/chapter06/patch.xml
   branches/alphabetical/BOOK/general.ent
   branches/alphabetical/BOOK/stylesheets/lfs.css
Log:
Ported r7357 and r7358 from trunk to alphabetical branch.

Modified: branches/alphabetical/BOOK/chapter06/man-db.xml
===================================================================
--- branches/alphabetical/BOOK/chapter06/man-db.xml	2006-02-06 20:52:27 UTC (rev 7359)
+++ branches/alphabetical/BOOK/chapter06/man-db.xml	2006-02-06 20:57:27 UTC (rev 7360)
@@ -1,54 +1,70 @@
 <?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN" "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
+  "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../general.ent">
   %general-entities;
 ]>
+
 <sect1 id="ch-system-man-db" role="wrap">
-<title>Man-DB-&man-db-version;</title>
-<?dbhtml filename="man-db.html"?>
+  <?dbhtml filename="man-db.html"?>
 
-<indexterm zone="ch-system-man-db"><primary sortas="a-Man-DB">Man-DB</primary></indexterm>
+  <title>Man-DB-&man-db-version;</title>
 
-<sect2 role="package"><title/>
-<para>The Man-DB package contains programs for finding and viewing man pages.</para>
+  <indexterm zone="ch-system-man-db">
+    <primary sortas="a-Man-DB">Man-DB</primary>
+  </indexterm>
 
-<segmentedlist>
-<segtitle>&buildtime;</segtitle>
-<segtitle>&diskspace;</segtitle>
-<seglistitem><seg>0.1 SBU</seg><seg>1.1 MB</seg></seglistitem>
-</segmentedlist>
+  <sect2 role="package">
+    <title/>
 
-<segmentedlist>
-<segtitle>&dependencies;</segtitle>
-<seglistitem><seg>Bash, Berkeley DB, Binutils, Coreutils, Gawk, GCC,
-Gettext, Glibc, Grep, Make, and Sed</seg></seglistitem>
-</segmentedlist>
-</sect2>
+    <para>The Man-DB package contains programs for finding and viewing man
+    pages.</para>
 
-<sect2 role="installation">
-<title>Installation of Man-DB</title>
+    <segmentedlist>
+      <segtitle>&buildtime;</segtitle>
+      <segtitle>&diskspace;</segtitle>
 
-<para>Three adjustments need to be made to the sources of Man-DB.</para>
+      <seglistitem>
+        <seg>0.1 SBU</seg>
+        <seg>1.1 MB</seg>
+      </seglistitem>
+    </segmentedlist>
 
-<para>The first one changes the location of translated manual pages that come
-with Man-DB, in order for them to be accessible in both traditional and
-UTF-8 locales:</para>
+    <segmentedlist>
+      <segtitle>&dependencies;</segtitle>
 
+      <seglistitem>
+        <seg>Bash, Berkeley DB, Binutils, Coreutils, Gawk, GCC, Gettext,
+        Glibc, Grep, Make, and Sed</seg>
+      </seglistitem>
+    </segmentedlist>
+
+  </sect2>
+
+  <sect2 role="installation">
+    <title>Installation of Man-DB</title>
+
+    <para>Three adjustments need to be made to the sources of Man-DB.</para>
+
+    <para>The first one changes the location of translated manual pages that come
+    with Man-DB, in order for them to be accessible in both traditional and
+    UTF-8 locales:</para>
+
 <screen><userinput>mv man/de{_DE.88591,} &&
 mv man/es{_ES.88591,} &&
 mv man/it{_IT.88591,} &&
 mv man/ja{_JP.eucJP,} &&
 sed -i 's,\*_\*,??,' man/Makefile.in</userinput></screen>
 
-<para>The second change is a <command>sed</command> substitution to delete the
-<quote>/usr/man</quote> lines in the
-<filename>man_db.conf</filename> file to prevent redundant results when
-using programs such as <command>whatis</command>:</para>
+    <para>The second change is a <command>sed</command> substitution to delete
+    the <quote>/usr/man</quote> lines in the <filename>man_db.conf</filename>
+    file to prevent redundant results when using programs such as
+    <command>whatis</command>:</para>
 
 <screen><userinput>sed -i '/\t\/usr\/man/d' src/man_db.conf.in</userinput></screen>
 
-<para>The third change accounts for programs that Man-DB should be able
-to find at runtime, but that haven't been installed yet:</para>
+    <para>The third change accounts for programs that Man-DB should be able
+    to find at runtime, but that haven't been installed yet:</para>
 
 <screen><userinput>cat >>include/manconfig.h.in <<"EOF"
 <literal>#define WEB_BROWSER "exec /usr/bin/lynx"
@@ -57,209 +73,322 @@
 #define GRAP "/usr/bin/grap"</literal>
 EOF</userinput></screen>
 
-<para>The <command>col</command> program is a part of the Util-linux package,
-<command>lynx</command> is a text-based web browser
-(see BLFS for installation instructions),
-<command>vgrind</command> converts program sources to Groff input,
-and <command>grap</command> is useful for typesetting graphs in Groff documents.
-The <command>vgrind</command> and <command>grap</command> programs are
-not normally needed for viewing manual pages. They are
-not part of LFS or BLFS, but you should be able to install them yourself
-after finishing LFS if you wish to do so.</para>
+    <para>The <command>col</command> program is a part of the Util-linux
+    package, <command>lynx</command> is a text-based web browser (see BLFS
+    for installation instructions), <command>vgrind</command> converts
+    program sources to Groff input, and <command>grap</command> is useful
+    for typesetting graphs in Groff documents. The <command>vgrind</command>
+    and <command>grap</command> programs are not normally needed for viewing
+    manual pages. They are not part of LFS or BLFS, but you should be able
+    to install them yourself after finishing LFS if you wish to do so.</para>
 
-<para>Prepare Man-DB for compilation:</para>
+    <para>Prepare Man-DB for compilation:</para>
 
 <screen><userinput>./configure --prefix=/usr --enable-mb-groff --disable-setuid</userinput></screen>
 
-<para>The meaning of the configure options:</para>
+    <variablelist>
+      <title>The meaning of the configure options:</title>
 
-<variablelist>
-<varlistentry>
-<term><parameter>--enable-mb-groff</parameter></term>
-<listitem><para>This tells the <command>man</command> program to
-use the <quote>ascii8</quote> and <quote>nippon</quote> Groff devices for formatting non-ISO-8859-1
-manual pages.</para></listitem>
-</varlistentry>
-<varlistentry>
-<term><parameter>--disable-setuid</parameter></term>
-<listitem><para>This disables making the <command>man</command> program
-setuid to user <quote>man</quote>.</para></listitem>
-</varlistentry>
-</variablelist>
+      <varlistentry>
+        <term><parameter>--enable-mb-groff</parameter></term>
+        <listitem>
+          <para>This tells the <command>man</command> program to use the
+          <quote>ascii8</quote> and <quote>nippon</quote> Groff devices for
+          formatting non-ISO-8859-1 manual pages.</para>
+        </listitem>
+      </varlistentry>
 
-<para>Compile the package:</para>
+      <varlistentry>
+        <term><parameter>--disable-setuid</parameter></term>
+        <listitem>
+          <para>This disables making the <command>man</command> program setuid
+          to user <systemitem class="username">man</systemitem>.</para>
+        </listitem>
+      </varlistentry>
 
+    </variablelist>
+
+    <para>Compile the package:</para>
+
 <screen><userinput>make</userinput></screen>
 
-<para>Install the package:</para>
+    <para>Install the package:</para>
 
 <screen><userinput>make install</userinput></screen>
 
-<para>Additional information regarding the compression of
-man and info pages can be found in the BLFS book at
-<ulink url="&blfs-root;view/cvs/postlfs/compressdoc.html"/>.</para>
+    <para>Additional information regarding the compression of
+    man and info pages can be found in the BLFS book at
+    <ulink url="&blfs-root;view/cvs/postlfs/compressdoc.html"/>.</para>
 
-</sect2>
+  </sect2>
 
-<sect2><title>Non-English Manual Pages in LFS</title>
+  <sect2>
+    <title>Non-English Manual Pages in LFS</title>
 
-<para>Linux distributions have different policies concerning the character
-encoding in which manual pages are stored in the filesystem. E.g., RedHat
-stores all manual pages in UTF-8, while Debian uses language-specific
-(mostly 8-bit) encodings. This leads to incompatibility of packages with
-manual pages designed for different distributions.</para>
+    <para>Linux distributions have different policies concerning the character
+    encoding in which manual pages are stored in the filesystem. E.g., RedHat
+    stores all manual pages in UTF-8, while Debian uses language-specific
+    (mostly 8-bit) encodings. This leads to incompatibility of packages with
+    manual pages designed for different distributions.</para>
 
-<para>LFS uses the same conventions as Debian. The relationship between
-language codes and the expected encoding of manual pages is listed below.
-Man-DB automatically converts them to the locale encoding while viewing.</para>
+    <para>LFS uses the same conventions as Debian. The relationship between
+    language codes and the expected encoding of manual pages is listed below.
+    Man-DB automatically converts them to the locale encoding while viewing.</para>
 
-<!-- Origin: man-db-2.4.3/src/encodings.c -->
-<table frame='all'><title>Expected character encoding of manual pages</title>
-<tgroup cols='2' align='center' colsep='1' rowsep='1'>
-<thead>
-<row><entry>Language (code)</entry><entry>Encoding</entry></row>
-</thead>
-<tbody>
-<row><entry>Danish (da)</entry><entry>ISO-8859-1</entry></row>
-<row><entry>German (de)</entry><entry>ISO-8859-1</entry></row>
-<row><entry>English (en)</entry><entry>ISO-8859-1</entry></row>
-<row><entry>Spanish (es)</entry><entry>ISO-8859-1</entry></row>
-<row><entry>Finnish (fi)</entry><entry>ISO-8859-1</entry></row>
-<row><entry>French (fr)</entry><entry>ISO-8859-1</entry></row>
-<row><entry>Irish (ga)</entry><entry>ISO-8859-1</entry></row>
-<row><entry>Galician (gl)</entry><entry>ISO-8859-1</entry></row>
-<row><entry>Indonesian (id)</entry><entry>ISO-8859-1</entry></row>
-<row><entry>Icelandic (is)</entry><entry>ISO-8859-1</entry></row>
-<row><entry>Italian (it)</entry><entry>ISO-8859-1</entry></row>
-<row><entry>Dutch (nl)</entry><entry>ISO-8859-1</entry></row>
-<!-- BUG: "no" is deprecated, should use "nb" or "nn" and symlinks -->
-<row><entry>Norwegian (no)</entry><entry>ISO-8859-1</entry></row>
-<!-- END BUG -->
-<row><entry>Portuguese (pt)</entry><entry>ISO-8859-1</entry></row>
-<row><entry>Swedish (sv)</entry><entry>ISO-8859-1</entry></row>
-<!-- Languages below require patched groff -->
-<row><entry>Czech (cs)</entry><entry>ISO-8859-2</entry></row>
-<row><entry>Croatian (hr)</entry><entry>ISO-8859-2</entry></row>
-<row><entry>Hungarian (hu)</entry><entry>ISO-8859-2</entry></row>
-<row><entry>Japanese (ja)</entry><entry>EUC-JP</entry></row>
-<row><entry>Korean (ko)</entry><entry>EUC-KR</entry></row>
-<row><entry>Polish (pl)</entry><entry>ISO-8859-2</entry></row>
-<row><entry>Russian (ru)</entry><entry>KOI8-R</entry></row>
-<row><entry>Slovak (sk)</entry><entry>ISO-8859-2</entry></row>
-<row><entry>Turkish (tr)</entry><entry>ISO-8859-9</entry></row>
-</tbody>
-</tgroup>
-</table>
+    <!-- Origin: man-db-2.4.3/src/encodings.c -->
+    <table>
+      <title>Expected character encoding of manual pages</title>
 
-<note><para>Manual pages in languages not in the list are not supported.
-Norwegian doesn't work now because of the transition from no_NO to nb_NO
-locale, and Korean is non-functional because of the incomplete Groff patch.
-</para></note>
+      <tgroup cols="2">
 
-<para>If upstream distributes the manual pages in the same encoding as
-Man-DB expects, the manual pages can be copied to
-<filename class="directory">/usr/share/man/<replaceable>[language code]</replaceable></filename>.
-E.g., French manual pages
-(<ulink url="http://ccb.club.fr/man/man-fr-1.58.0.tar.bz2"/>)
-can be installed with the following command:</para>
+        <thead>
+          <row>
+            <entry>Language (code)</entry>
+            <entry>Encoding</entry>
+          </row>
+        </thead>
 
+        <tbody>
+          <row>
+            <entry>Danish (da)</entry>
+            <entry>ISO-8859-1</entry>
+          </row>
+          <row>
+            <entry>German (de)</entry>
+            <entry>ISO-8859-1</entry>
+          </row>
+          <row>
+            <entry>English (en)</entry>
+            <entry>ISO-8859-1</entry>
+          </row>
+          <row>
+            <entry>Spanish (es)</entry>
+            <entry>ISO-8859-1</entry>
+          </row>
+          <row>
+            <entry>Finnish (fi)</entry>
+            <entry>ISO-8859-1</entry>
+          </row>
+          <row>
+            <entry>French (fr)</entry>
+            <entry>ISO-8859-1</entry>
+          </row>
+          <row>
+            <entry>Irish (ga)</entry>
+            <entry>ISO-8859-1</entry>
+          </row>
+          <row>
+            <entry>Galician (gl)</entry>
+            <entry>ISO-8859-1</entry>
+          </row>
+          <row>
+            <entry>Indonesian (id)</entry>
+            <entry>ISO-8859-1</entry>
+          </row>
+          <row>
+            <entry>Icelandic (is)</entry>
+            <entry>ISO-8859-1</entry>
+          </row>
+          <row>
+            <entry>Italian (it)</entry>
+            <entry>ISO-8859-1</entry>
+          </row>
+          <row>
+            <entry>Dutch (nl)</entry>
+            <entry>ISO-8859-1</entry>
+          </row>
+          <!-- BUG: "no" is deprecated, should use "nb" or "nn" and symlinks -->
+          <row>
+            <entry>Norwegian (no)</entry>
+            <entry>ISO-8859-1</entry>
+          </row>
+          <!-- END BUG -->
+          <row>
+            <entry>Portuguese (pt)</entry>
+            <entry>ISO-8859-1</entry>
+          </row>
+          <row>
+            <entry>Swedish (sv)</entry>
+            <entry>ISO-8859-1</entry>
+          </row>
+          <!-- Languages below require patched groff -->
+          <row>
+            <entry>Czech (cs)</entry>
+            <entry>ISO-8859-2</entry>
+          </row>
+          <row>
+            <entry>Croatian (hr)</entry>
+            <entry>ISO-8859-2</entry>
+          </row>
+          <row>
+            <entry>Hungarian (hu)</entry>
+            <entry>ISO-8859-2</entry>
+          </row>
+          <row>
+            <entry>Japanese (ja)</entry>
+            <entry>EUC-JP</entry>
+          </row>
+          <row>
+            <entry>Korean (ko)</entry>
+            <entry>EUC-KR</entry>
+          </row>
+          <row>
+            <entry>Polish (pl)</entry>
+            <entry>ISO-8859-2</entry>
+          </row>
+          <row>
+            <entry>Russian (ru)</entry>
+            <entry>KOI8-R</entry>
+          </row>
+          <row>
+            <entry>Slovak (sk)</entry>
+            <entry>ISO-8859-2</entry>
+          </row>
+          <row>
+            <entry>Turkish (tr)</entry>
+            <entry>ISO-8859-9</entry>
+          </row>
+        </tbody>
+
+      </tgroup>
+
+    </table>
+
+    <note>
+      <para>Manual pages in languages not in the list are not supported.
+      Norwegian doesn't work now because of the transition from no_NO to
+      nb_NO locale, and Korean is non-functional because of the incomplete
+      Groff patch.</para>
+    </note>
+
+    <para>If upstream distributes the manual pages in the same encoding
+    as Man-DB expects, the manual pages can be copied to
+    <filename class="directory">/usr/share/man/<replaceable>[language
+    code]</replaceable></filename>. E.g., French manual pages
+    (<ulink url="http://ccb.club.fr/man/man-fr-1.58.0.tar.bz2"/>) can be
+    installed with the following command:</para>
+
 <screen role="nodump"><userinput>mkdir -p /usr/share/man/fr &&
 cp -rv man? /usr/share/man/fr</userinput></screen>
 
-<para>If upstream distributes manual pages in UTF-8 (i.e., <quote>for RedHat</quote>)
-instead of the encoding listed in the table above, they have to be
-converted from UTF-8 to the encoding listed in the table before
-installation. E.g., Spanish manual pages
-(<ulink url="http://ditec.um.es/~piernas/manpages-es/man-pages-es-1.55.tar.bz2"/>)
-can be installed with the following commands:</para>
+    <para>If upstream distributes manual pages in UTF-8 (i.e., <quote>for
+    RedHat</quote>) instead of the encoding listed in the table above, they
+    have to be converted from UTF-8 to the encoding listed in the table before
+    installation. E.g., Spanish manual pages (<ulink
+    url="http://ditec.um.es/~piernas/manpages-es/man-pages-es-1.55.tar.bz2"/>)
+    can be installed with the following commands:</para>
 
 <screen role="nodump"><userinput>mkdir -p /usr/share/man/es &&
 find man? -type f | grep -v 'man7/iso_8859-7.7' | \
 while read F ; do
-	iconv -f UTF-8 -t ISO-8859-1 $F >tmp ; mv tmp $F
+  iconv -f UTF-8 -t ISO-8859-1 $F >tmp ; mv tmp $F
 done &&
 cp -rv man? /usr/share/man/es</userinput></screen>
 
-<note><para>The need to exclude the <filename>man7/iso_8859-7.7</filename> file
-from the conversion process because it is already in ISO-8859-1 is a packaging
-bug in man-pages-es-1.55. Future versions should not require this workaround.</para></note>
+    <note>
+      <para>The need to exclude the <filename>man7/iso_8859-7.7</filename> file
+      from the conversion process because it is already in ISO-8859-1 is a
+      packaging bug in man-pages-es-1.55. Future versions should not require
+      this workaround.</para>
+    </note>
 
-</sect2>
+  </sect2>
 
-<sect2 id="contents-man-db" role="content"><title>Contents of Man-DB</title>
+  <sect2 id="contents-man-db" role="content">
+    <title>Contents of Man-DB</title>
 
-<segmentedlist>
-<segtitle>Installed programs</segtitle>
-<seglistitem><seg>accessdb, apropos, catman, lexgrog, man, mandb, manpath,
-and whatis</seg></seglistitem>
-</segmentedlist>
+    <segmentedlist>
+      <segtitle>Installed programs</segtitle>
 
-<variablelist><bridgehead renderas="sect3">Short Descriptions</bridgehead>
-<?dbfo list-presentation="list"?>
-<?dbhtml list-presentation="table"?>
+      <seglistitem>
+        <seg>accessdb, apropos, catman, lexgrog, man, mandb, manpath,
+        and whatis</seg>
+      </seglistitem>
+    </segmentedlist>
 
+    <variablelist>
+      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
+      <?dbfo list-presentation="list"?>
+      <?dbhtml list-presentation="table"?>
 
-<varlistentry id="accessdb">
-<term><command>accessdb</command></term>
-<listitem>
-<para>Dumps the <command>whatis</command> database contents in human-readable form</para>
-<indexterm zone="ch-system-man-db accessdb"><primary sortas="b-accessdb">accessdb</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="accessdb">
+        <term><command>accessdb</command></term>
+        <listitem>
+          <para>Dumps the <command>whatis</command> database contents in
+          human-readable form</para>
+          <indexterm zone="ch-system-man-db accessdb">
+            <primary sortas="b-accessdb">accessdb</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="apropos">
-<term><command>apropos</command></term>
-<listitem>
-<para>Searches the <command>whatis</command> database and displays the short descriptions
-of system commands that contain a given string</para>
-<indexterm zone="ch-system-man-db apropos"><primary sortas="b-apropos">apropos</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="apropos">
+        <term><command>apropos</command></term>
+        <listitem>
+          <para>Searches the <command>whatis</command> database and displays
+          the short descriptions of system commands that contain a given
+          string</para>
+          <indexterm zone="ch-system-man-db apropos">
+            <primary sortas="b-apropos">apropos</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="catman">
-<term><command>catman</command></term>
-<listitem>
-<para>Creates or updates the pre-formatted manual pages</para>
-<indexterm zone="ch-system-man-db catman"><primary sortas="b-catman">catman</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="catman">
+        <term><command>catman</command></term>
+        <listitem>
+          <para>Creates or updates the pre-formatted manual pages</para>
+          <indexterm zone="ch-system-man-db catman">
+            <primary sortas="b-catman">catman</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="lexgrog">
-<term><command>lexgrog</command></term>
-<listitem>
-<para>Displays one-line summary information about a given manual page</para>
-<indexterm zone="ch-system-man-db lexgrog"><primary sortas="b-lexgrog">lexgrog</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="lexgrog">
+        <term><command>lexgrog</command></term>
+        <listitem>
+          <para>Displays one-line summary information about a given manual
+          page</para>
+          <indexterm zone="ch-system-man-db lexgrog">
+            <primary sortas="b-lexgrog">lexgrog</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="man">
-<term><command>man</command></term>
-<listitem>
-<para>Formats and displays the requested manual page</para>
-<indexterm zone="ch-system-man-db man"><primary sortas="b-man">man</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="man">
+        <term><command>man</command></term>
+        <listitem>
+          <para>Formats and displays the requested manual page</para>
+          <indexterm zone="ch-system-man-db man">
+            <primary sortas="b-man">man</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="mandb">
-<term><command>mandb</command></term>
-<listitem>
-<para>Creates or updates the <command>whatis</command> database</para>
-<indexterm zone="ch-system-man-db mandb"><primary sortas="b-mandb">mandb</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="mandb">
+        <term><command>mandb</command></term>
+        <listitem>
+          <para>Creates or updates the <command>whatis</command> database</para>
+          <indexterm zone="ch-system-man-db mandb">
+            <primary sortas="b-mandb">mandb</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="whatis">
-<term><command>whatis</command></term>
-<listitem>
-<para>Searches the <command>whatis</command> database and displays the short descriptions
-of system commands that contain the given keyword as a separate
-word</para>
-<indexterm zone="ch-system-man-db whatis"><primary sortas="b-whatis">whatis</primary></indexterm>
-</listitem>
-</varlistentry>
-</variablelist>
+      <varlistentry id="whatis">
+        <term><command>whatis</command></term>
+        <listitem>
+          <para>Searches the <command>whatis</command> database and displays
+          the short descriptions of system commands that contain the given
+          keyword as a separate word</para>
+          <indexterm zone="ch-system-man-db whatis">
+            <primary sortas="b-whatis">whatis</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-</sect2>
+    </variablelist>
 
+  </sect2>
+
 </sect1>
-

Modified: branches/alphabetical/BOOK/chapter06/man-pages.xml
===================================================================
--- branches/alphabetical/BOOK/chapter06/man-pages.xml	2006-02-06 20:52:27 UTC (rev 7359)
+++ branches/alphabetical/BOOK/chapter06/man-pages.xml	2006-02-06 20:57:27 UTC (rev 7360)
@@ -1,61 +1,82 @@
 <?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN" "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
+  "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../general.ent">
   %general-entities;
 ]>
+
 <sect1 id="ch-system-man-pages" role="wrap">
-<title>Man-pages-&man-pages-version;</title>
-<?dbhtml filename="man-pages.html"?>
+  <?dbhtml filename="man-pages.html"?>
 
-<indexterm zone="ch-system-man-pages"><primary sortas="a-Man-pages">Man-pages</primary></indexterm>
+  <title>Man-pages-&man-pages-version;</title>
 
-<sect2 role="package"><title/>
-<para>The Man-pages package contains over 1,200 man pages.</para>
+  <indexterm zone="ch-system-man-pages">
+    <primary sortas="a-Man-pages">Man-pages</primary>
+  </indexterm>
 
-<segmentedlist>
-<segtitle>&buildtime;</segtitle>
-<segtitle>&diskspace;</segtitle>
-<seglistitem><seg>0.1 SBU</seg><seg>18.6 MB</seg></seglistitem>
-</segmentedlist>
+  <sect2 role="package">
+    <title/>
 
-<segmentedlist>
-<segtitle>&dependencies;</segtitle>
-<seglistitem><seg>Bash, Coreutils, and Make</seg></seglistitem>
-</segmentedlist>
-</sect2>
+    <para>The Man-pages package contains over 1,200 man pages.</para>
 
-<sect2 role="installation">
-<title>Installation of Man-pages</title>
+    <segmentedlist>
+      <segtitle>&buildtime;</segtitle>
+      <segtitle>&diskspace;</segtitle>
 
-<para>Install Man-pages by running:</para>
+      <seglistitem>
+        <seg>0.1 SBU</seg>
+        <seg>18.6 MB</seg>
+      </seglistitem>
+    </segmentedlist>
 
+    <segmentedlist>
+      <segtitle>&dependencies;</segtitle>
+
+      <seglistitem>
+        <seg>Bash, Coreutils, and Make</seg>
+      </seglistitem>
+    </segmentedlist>
+
+  </sect2>
+
+  <sect2 role="installation">
+    <title>Installation of Man-pages</title>
+
+    <para>Install Man-pages by running:</para>
+
 <screen><userinput>make install</userinput></screen>
 
-</sect2>
+  </sect2>
 
+  <sect2 id="contents-manpages" role="content">
+    <title>Contents of Man-pages</title>
 
-<sect2 id="contents-manpages" role="content"><title>Contents of Man-pages</title>
+    <segmentedlist>
+      <segtitle>Installed files</segtitle>
 
-<segmentedlist>
-<segtitle>Installed files</segtitle>
-<seglistitem><seg>various man pages</seg></seglistitem>
-</segmentedlist>
+      <seglistitem>
+        <seg>various man pages</seg>
+      </seglistitem>
+    </segmentedlist>
 
-<variablelist><bridgehead renderas="sect3">Short Descriptions</bridgehead>
-<?dbfo list-presentation="list"?>
-<?dbhtml list-presentation="table"?>
+    <variablelist>
+      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
+      <?dbfo list-presentation="list"?>
+      <?dbhtml list-presentation="table"?>
 
-<varlistentry id="man-pages">
-<term><filename>man pages</filename></term>
-<listitem>
-<para>Describe the C and C++ functions, important
-device files, and significant configuration files</para>
-<indexterm zone="ch-system-man-pages man-pages"><primary sortas="e-man-pages">man pages</primary></indexterm>
-</listitem>
-</varlistentry>
-</variablelist>
+      <varlistentry id="man-pages">
+        <term><filename>man pages</filename></term>
+        <listitem>
+          <para>Describe the C and C++ functions, important
+          device files, and significant configuration files</para>
+          <indexterm zone="ch-system-man-pages man-pages">
+            <primary sortas="e-man-pages">man pages</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-</sect2>
+    </variablelist>
 
+  </sect2>
+
 </sect1>
-

Modified: branches/alphabetical/BOOK/chapter06/mktemp.xml
===================================================================
--- branches/alphabetical/BOOK/chapter06/mktemp.xml	2006-02-06 20:52:27 UTC (rev 7359)
+++ branches/alphabetical/BOOK/chapter06/mktemp.xml	2006-02-06 20:57:27 UTC (rev 7360)
@@ -1,100 +1,128 @@
 <?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN" "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
+  "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../general.ent">
   %general-entities;
 ]>
+
 <sect1 id="ch-system-mktemp" role="wrap">
-<title>Mktemp-&mktemp-version;</title>
-<?dbhtml filename="mktemp.html"?>
+  <?dbhtml filename="mktemp.html"?>
 
-<indexterm zone="ch-system-mktemp"><primary sortas="a-Mktemp">Mktemp</primary></indexterm>
+  <title>Mktemp-&mktemp-version;</title>
 
-<sect2 role="package"><title/>
-<para>The Mktemp package contains programs used to create secure temporary
-files in shell scripts.</para>
+  <indexterm zone="ch-system-mktemp">
+    <primary sortas="a-Mktemp">Mktemp</primary>
+  </indexterm>
 
-<segmentedlist>
-<segtitle>&buildtime;</segtitle>
-<segtitle>&diskspace;</segtitle>
-<seglistitem><seg>0.1 SBU</seg><seg>436 KB</seg></seglistitem>
-</segmentedlist>
+  <sect2 role="package">
+    <title/>
 
-<segmentedlist>
-<segtitle>&dependencies;</segtitle>
-<seglistitem><seg>Coreutils, Make, Patch, and Zlib</seg></seglistitem>
-</segmentedlist>
-</sect2>
+    <para>The Mktemp package contains programs used to create secure temporary
+    files in shell scripts.</para>
 
-<sect2 role="installation">
-<title>Installation of Mktemp</title>
+    <segmentedlist>
+      <segtitle>&buildtime;</segtitle>
+      <segtitle>&diskspace;</segtitle>
 
-<para>Many scripts still use the deprecated
-<command>tempfile</command> program, which has functionality similar
-to <command>mktemp</command>. Patch Mktemp to include a
-<command>tempfile</command> wrapper:</para>
+      <seglistitem>
+        <seg>0.1 SBU</seg>
+        <seg>436 KB</seg>
+      </seglistitem>
+    </segmentedlist>
 
+    <segmentedlist>
+      <segtitle>&dependencies;</segtitle>
+
+      <seglistitem>
+        <seg>Coreutils, Make, Patch, and Zlib</seg>
+      </seglistitem>
+    </segmentedlist>
+
+  </sect2>
+
+  <sect2 role="installation">
+    <title>Installation of Mktemp</title>
+
+    <para>Many scripts still use the deprecated
+    <command>tempfile</command> program, which has functionality similar
+    to <command>mktemp</command>. Patch Mktemp to include a
+    <command>tempfile</command> wrapper:</para>
+
 <screen><userinput>patch -Np1 -i ../&mktemp-tempfile-patch;</userinput></screen>
 
-<para>Prepare Mktemp for compilation:</para>
+    <para>Prepare Mktemp for compilation:</para>
 
 <screen><userinput>./configure --prefix=/usr --with-libc</userinput></screen>
 
-<para>The meaning of the configure options:</para>
+    <variablelist>
+      <title>The meaning of the configure options:</title>
 
-<variablelist>
-<varlistentry>
-<term><parameter>--with-libc</parameter></term>
-<listitem><para>This causes the <command>mktemp</command> program to 
-use the <emphasis>mkstemp</emphasis> and <emphasis>mkdtemp</emphasis>
-functions from the system C library instead of its own implementation of them.
-</para></listitem>
-</varlistentry>
-</variablelist>
+      <varlistentry>
+        <term><parameter>--with-libc</parameter></term>
+        <listitem>
+          <para>This causes the <command>mktemp</command> program to use the
+          <emphasis>mkstemp</emphasis> and <emphasis>mkdtemp</emphasis>
+          functions from the system C library instead of its own implementation
+          of them. </para>
+        </listitem>
+      </varlistentry>
 
-<para>Compile the package:</para>
+    </variablelist>
 
+    <para>Compile the package:</para>
+
 <screen><userinput>make</userinput></screen>
 
-<para>This package does not come with a test suite.</para>
+    <para>This package does not come with a test suite.</para>
 
-<para>Install the package:</para>
+    <para>Install the package:</para>
 
 <screen><userinput>make install
 make install-tempfile</userinput></screen>
 
-</sect2>
+  </sect2>
 
+  <sect2 id="contents-mktemp" role="content">
+    <title>Contents of Mktemp</title>
 
-<sect2 id="contents-mktemp" role="content"><title>Contents of Mktemp</title>
+    <segmentedlist>
+      <segtitle>Installed programs</segtitle>
 
-<segmentedlist>
-<segtitle>Installed programs</segtitle>
-<seglistitem><seg>mktemp and tempfile</seg></seglistitem>
-</segmentedlist>
+      <seglistitem>
+        <seg>mktemp and tempfile</seg>
+      </seglistitem>
+    </segmentedlist>
 
-<variablelist><bridgehead renderas="sect3">Short Descriptions</bridgehead>
-<?dbfo list-presentation="list"?>
-<?dbhtml list-presentation="table"?>
+    <variablelist>
+      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
+      <?dbfo list-presentation="list"?>
+      <?dbhtml list-presentation="table"?>
 
-<varlistentry id="mktemp">
-<term><command>mktemp</command></term>
-<listitem>
-<para>Creates temporary files in a secure manner; it is used in scripts</para>
-<indexterm zone="ch-system-mktemp mktemp"><primary sortas="b-mktemp">mktemp</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="mktemp">
+        <term><command>mktemp</command></term>
+        <listitem>
+          <para>Creates temporary files in a secure manner; it is used in
+          scripts</para>
+          <indexterm zone="ch-system-mktemp mktemp">
+            <primary sortas="b-mktemp">mktemp</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="tempfile">
-<term><command>tempfile</command></term>
-<listitem>
-<para>Creates temporary files in a less secure manner than 
-<command>mktemp</command>; it is installed for backwards-compatibility</para>
-<indexterm zone="ch-system-mktemp tempfile"><primary sortas="b-tempfile">tempfile</primary></indexterm>
-</listitem>
-</varlistentry>
-</variablelist>
+      <varlistentry id="tempfile">
+        <term><command>tempfile</command></term>
+        <listitem>
+          <para>Creates temporary files in a less secure manner than
+          <command>mktemp</command>; it is installed for
+          backwards-compatibility</para>
+          <indexterm zone="ch-system-mktemp tempfile">
+            <primary sortas="b-tempfile">tempfile</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-</sect2>
+    </variablelist>
 
+  </sect2>
+
 </sect1>
-

Modified: branches/alphabetical/BOOK/chapter06/module-init-tools.xml
===================================================================
--- branches/alphabetical/BOOK/chapter06/module-init-tools.xml	2006-02-06 20:52:27 UTC (rev 7359)
+++ branches/alphabetical/BOOK/chapter06/module-init-tools.xml	2006-02-06 20:57:27 UTC (rev 7360)
@@ -1,140 +1,176 @@
 <?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN" "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
+  "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../general.ent">
   %general-entities;
 ]>
+
 <sect1 id="ch-system-module-init-tools" role="wrap">
-<title>Module-Init-Tools-&module-init-tools-version;</title>
-<?dbhtml filename="module-init-tools.html"?>
+  <?dbhtml filename="module-init-tools.html"?>
 
-<indexterm zone="ch-system-module-init-tools"><primary sortas="a-Module-Init-Tools">Module-Init-Tools</primary></indexterm>
+  <title>Module-Init-Tools-&module-init-tools-version;</title>
 
-<sect2 role="package"><title/>
-<para>The Module-Init-Tools package contains programs for handling kernel
-modules in Linux kernels greater than or equal to version 2.5.47.</para>
+  <indexterm zone="ch-system-module-init-tools">
+    <primary sortas="a-Module-Init-Tools">Module-Init-Tools</primary>
+  </indexterm>
 
-<segmentedlist>
-<segtitle>&buildtime;</segtitle>
-<segtitle>&diskspace;</segtitle>
-<seglistitem><seg>0.3 SBU</seg><seg>3.3 MB</seg></seglistitem>
-</segmentedlist>
+  <sect2 role="package">
+    <title/>
 
-<segmentedlist>
-<segtitle>&dependencies;</segtitle>
-<seglistitem><seg>Bash, Binutils, Bison,
-Coreutils, Diffutils, Flex, GCC, Glibc, Grep, M4, Make, Sed, and Zlib</seg></seglistitem>
-</segmentedlist>
-</sect2>
+    <para>The Module-Init-Tools package contains programs for handling kernel
+    modules in Linux kernels greater than or equal to version 2.5.47.</para>
 
-<sect2 role="installation">
-<title>Installation of Module-Init-Tools</title>
+    <segmentedlist>
+      <segtitle>&buildtime;</segtitle>
+      <segtitle>&diskspace;</segtitle>
 
-<para>Issue the following commands to perform the tests (note that the
-<command>make distclean</command> command is required to clean up the source
-tree, as the source gets recompiled as part of the testing process):</para>
+      <seglistitem>
+        <seg>0.3 SBU</seg>
+        <seg>3.3 MB</seg>
+      </seglistitem>
+    </segmentedlist>
 
+    <segmentedlist>
+      <segtitle>&dependencies;</segtitle>
+
+      <seglistitem>
+        <seg>Bash, Binutils, Bison, Coreutils, Diffutils, Flex, GCC, Glibc,
+        Grep, M4, Make, Sed, and Zlib</seg>
+      </seglistitem>
+    </segmentedlist>
+
+  </sect2>
+
+  <sect2 role="installation">
+    <title>Installation of Module-Init-Tools</title>
+
+    <para>Issue the following commands to perform the tests (note that the
+    <command>make distclean</command> command is required to clean up the source
+    tree, as the source gets recompiled as part of the testing process):</para>
+
 <screen><userinput>./configure &&
 make check &&
 make distclean</userinput></screen>
 
-<para>Prepare Module-Init-Tools for compilation:</para>
+    <para>Prepare Module-Init-Tools for compilation:</para>
 
 <screen><userinput>./configure --prefix=/ --enable-zlib</userinput></screen>
 
-<para>Compile the package:</para>
+    <para>Compile the package:</para>
 
 <screen><userinput>make</userinput></screen>
 
-<para>Install the package:</para>
+    <para>Install the package:</para>
 
 <screen><userinput>make install</userinput></screen>
 
-</sect2>
+  </sect2>
 
+  <sect2 id="contents-module-init-tools" role="content">
+    <title>Contents of Module-Init-Tools</title>
 
-<sect2 id="contents-module-init-tools" role="content"><title>Contents of Module-Init-Tools</title>
+    <segmentedlist>
+      <segtitle>Installed programs</segtitle>
 
-<segmentedlist>
-<segtitle>Installed programs</segtitle>
-<seglistitem><seg>depmod, generate-modprobe.conf, insmod,
-insmod.static, lsmod, modinfo, modprobe, and rmmod</seg></seglistitem>
-</segmentedlist>
+      <seglistitem>
+        <seg>depmod, generate-modprobe.conf, insmod, insmod.static, lsmod,
+        modinfo, modprobe, and rmmod</seg>
+      </seglistitem>
+    </segmentedlist>
 
-<variablelist><bridgehead renderas="sect3">Short Descriptions</bridgehead>
-<?dbfo list-presentation="list"?>
-<?dbhtml list-presentation="table"?>
+    <variablelist>
+      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
+      <?dbfo list-presentation="list"?>
+      <?dbhtml list-presentation="table"?>
 
-<varlistentry id="depmod">
-<term><command>depmod</command></term>
-<listitem>
-<para>Creates a dependency file based on the symbols it finds in the
-existing set of modules; this dependency file is used by <command>modprobe</command> to
-automatically load the required modules</para>
-<indexterm zone="ch-system-module-init-tools depmod"><primary sortas="b-depmod">depmod</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="depmod">
+        <term><command>depmod</command></term>
+        <listitem>
+          <para>Creates a dependency file based on the symbols it finds in the
+          existing set of modules; this dependency file is used by
+          <command>modprobe</command> to automatically load the required
+          modules</para>
+          <indexterm zone="ch-system-module-init-tools depmod">
+            <primary sortas="b-depmod">depmod</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="generate-modprobe.conf">
-<term><command>generate-modprobe.conf</command></term>
-<listitem>
-<para>Creates a modprobe.conf file from an existing 2.2 or 2.4 module setup</para>
-<indexterm zone="ch-system-module-init-tools generate-modprobe.conf"><primary sortas="b-generate-modprobe.conf">generate-modprobe.conf</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="generate-modprobe.conf">
+        <term><command>generate-modprobe.conf</command></term>
+        <listitem>
+          <para>Creates a modprobe.conf file from an existing 2.2 or 2.4 module
+          setup</para>
+          <indexterm zone="ch-system-module-init-tools generate-modprobe.conf">
+            <primary sortas="b-generate-modprobe.conf">generate-modprobe.conf</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="insmod">
-<term><command>insmod</command></term>
-<listitem>
-<para>Installs a loadable module in the running kernel</para>
-<indexterm zone="ch-system-module-init-tools insmod"><primary sortas="b-insmod">insmod</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="insmod">
+        <term><command>insmod</command></term>
+        <listitem>
+          <para>Installs a loadable module in the running kernel</para>
+          <indexterm zone="ch-system-module-init-tools insmod">
+            <primary sortas="b-insmod">insmod</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="insmod.static">
-<term><command>insmod.static</command></term>
-<listitem>
-<para>A statically compiled version of <command>insmod</command></para>
-<indexterm zone="ch-system-module-init-tools insmod.static"><primary
-sortas="b-insmod.static">insmod.static</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="insmod.static">
+        <term><command>insmod.static</command></term>
+        <listitem>
+          <para>A statically compiled version of <command>insmod</command></para>
+          <indexterm zone="ch-system-module-init-tools insmod.static">
+            <primary sortas="b-insmod.static">insmod.static</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="lsmod">
-<term><command>lsmod</command></term>
-<listitem>
-<para>Lists currently loaded modules</para>
-<indexterm zone="ch-system-module-init-tools lsmod"><primary sortas="b-lsmod">lsmod</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="lsmod">
+        <term><command>lsmod</command></term>
+        <listitem>
+          <para>Lists currently loaded modules</para>
+          <indexterm zone="ch-system-module-init-tools lsmod">
+            <primary sortas="b-lsmod">lsmod</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="modinfo">
-<term><command>modinfo</command></term>
-<listitem>
-<para>Examines an object file associated with a kernel module and
-displays any information that it can glean</para>
-<indexterm zone="ch-system-module-init-tools modinfo"><primary sortas="b-modinfo">modinfo</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="modinfo">
+        <term><command>modinfo</command></term>
+        <listitem>
+          <para>Examines an object file associated with a kernel module and
+          displays any information that it can glean</para>
+          <indexterm zone="ch-system-module-init-tools modinfo">
+            <primary sortas="b-modinfo">modinfo</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="modprobe">
-<term><command>modprobe</command></term>
-<listitem>
-<para>Uses a dependency file, created by
-<command>depmod</command>, to automatically load relevant modules</para>
-<indexterm zone="ch-system-module-init-tools modprobe"><primary sortas="b-modprobe">modprobe</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="modprobe">
+        <term><command>modprobe</command></term>
+        <listitem>
+          <para>Uses a dependency file, created by
+          <command>depmod</command>, to automatically load relevant modules</para>
+          <indexterm zone="ch-system-module-init-tools modprobe">
+            <primary sortas="b-modprobe">modprobe</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="rmmod">
-<term><command>rmmod</command></term>
-<listitem>
-<para>Unloads modules from the running kernel</para>
-<indexterm zone="ch-system-module-init-tools rmmod"><primary sortas="b-rmmod">rmmod</primary></indexterm>
-</listitem>
-</varlistentry>
-</variablelist>
+      <varlistentry id="rmmod">
+        <term><command>rmmod</command></term>
+        <listitem>
+          <para>Unloads modules from the running kernel</para>
+          <indexterm zone="ch-system-module-init-tools rmmod">
+            <primary sortas="b-rmmod">rmmod</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-</sect2>
+    </variablelist>
 
+  </sect2>
+
 </sect1>
-

Modified: branches/alphabetical/BOOK/chapter06/ncurses.xml
===================================================================
--- branches/alphabetical/BOOK/chapter06/ncurses.xml	2006-02-06 20:52:27 UTC (rev 7359)
+++ branches/alphabetical/BOOK/chapter06/ncurses.xml	2006-02-06 20:57:27 UTC (rev 7360)
@@ -1,286 +1,344 @@
 <?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN" "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
+  "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../general.ent">
   %general-entities;
 ]>
+
 <sect1 id="ch-system-ncurses" role="wrap">
-<title>Ncurses-&ncurses-version;</title>
-<?dbhtml filename="ncurses.html"?>
+  <?dbhtml filename="ncurses.html"?>
 
-<indexterm zone="ch-system-ncurses"><primary sortas="a-Ncurses">Ncurses</primary></indexterm>
+  <title>Ncurses-&ncurses-version;</title>
 
-<sect2 role="package"><title/>
-<para>The Ncurses package contains libraries for terminal-independent
-handling of character screens.</para>
+  <indexterm zone="ch-system-ncurses">
+    <primary sortas="a-Ncurses">Ncurses</primary>
+  </indexterm>
 
-<segmentedlist>
-<segtitle>&buildtime;</segtitle>
-<segtitle>&diskspace;</segtitle>
-<seglistitem><seg>0.6 SBU</seg><seg>18.6 MB</seg></seglistitem>
-</segmentedlist>
+  <sect2 role="package">
+    <title/>
 
-<segmentedlist>
-<segtitle>&dependencies;</segtitle>
-<seglistitem><seg>Bash, Binutils, Coreutils, Diffutils,
-Gawk, GCC, Glibc, Grep, Make, and Sed</seg></seglistitem>
-</segmentedlist>
-</sect2>
+    <para>The Ncurses package contains libraries for terminal-independent
+    handling of character screens.</para>
 
-<sect2 role="installation">
-<title>Installation of Ncurses</title>
-<!-- Uncomment if using a dated ncurses release instead of a numbered one.
+    <segmentedlist>
+      <segtitle>&buildtime;</segtitle>
+      <segtitle>&diskspace;</segtitle>
 
-<para>Since the release of Ncurses-&ncurses-version;, some bugs have been fixed
-and features added. The most important news are .......
-To get these fixes and features, apply the rollup patch:</para>
+      <seglistitem>
+        <seg>0.6 SBU</seg>
+        <seg>18.6 MB</seg>
+      </seglistitem>
+    </segmentedlist>
 
+    <segmentedlist>
+      <segtitle>&dependencies;</segtitle>
+
+      <seglistitem>
+        <seg>Bash, Binutils, Coreutils, Diffutils, Gawk, GCC, Glibc, Grep,
+        Make, and Sed</seg>
+      </seglistitem>
+    </segmentedlist>
+
+  </sect2>
+
+  <sect2 role="installation">
+    <title>Installation of Ncurses</title>
+    <!-- Uncomment if using a dated ncurses release instead of a numbered one.
+
+    <para>Since the release of Ncurses-&ncurses-version;, some bugs have been fixed
+    and features added. The most important news are .......
+    To get these fixes and features, apply the rollup patch:</para>
+
 <screen><userinput>bzcat ../&ncurses-rollup-patch; | patch -Np1</userinput></screen>
--->
+    -->
 
-<para>Since the release of Ncurses-&ncurses-version;, a memory leak and some
-display bugs were found and fixed upstream. Apply those fixes:</para>
+    <para>Since the release of Ncurses-&ncurses-version;, a memory leak and some
+    display bugs were found and fixed upstream. Apply those fixes:</para>
 
 <screen><userinput>patch -Np1 -i ../&ncurses-fixes-patch;</userinput></screen>
 
-<para>Prepare Ncurses for compilation:</para>
+    <para>Prepare Ncurses for compilation:</para>
 
 <screen><userinput>./configure --prefix=/usr --with-shared --without-debug --enable-widec</userinput></screen>
 
-<para>The meaning of the configure options:</para>
+    <variablelist>
+      <title>The meaning of the configure option:</title>
 
-<variablelist>
-<varlistentry>
-<term><parameter>--enable-widec</parameter></term>
-<listitem><para>This switch causes wide-character libraries
-(e.g., <filename class="libraryfile">libncursesw.so.&ncurses-version;</filename>)
-to be built instead of normal ones
-(e.g., <filename class="libraryfile">libncurses.so.&ncurses-version;</filename>).
-These wide-character libraries are usable in both multibyte and traditional 8-bit
-locales, while normal libraries work properly only in 8-bit locales.
-Wide-character and normal libraries are source-compatible, but not
-binary-compatible.</para>
-</listitem>
-</varlistentry>
-<!--
-<varlistentry>
-<term><parameter>- -without-cxx-binding</parameter></term>
-<listitem><para>This optional switch causes the
-<filename class="libraryfile">libncurses++w.a</filename> library
-not to be built. Nothing in LFS and BLFS uses this library.</para>
-</listitem>
-</varlistentry>
--->
-</variablelist>
+      <varlistentry>
+        <term><parameter>--enable-widec</parameter></term>
+        <listitem>
+          <para>This switch causes wide-character libraries (e.g., <filename
+          class="libraryfile">libncursesw.so.&ncurses-version;</filename>)
+          to be built instead of normal ones (e.g., <filename
+          class="libraryfile">libncurses.so.&ncurses-version;</filename>).
+          These wide-character libraries are usable in both multibyte and
+          traditional 8-bit locales, while normal libraries work properly
+          only in 8-bit locales. Wide-character and normal libraries are
+          source-compatible, but not binary-compatible.</para>
+        </listitem>
+      </varlistentry>
 
-<para>Compile the package:</para>
+      <!--
+      <varlistentry>
+        <term><parameter>- -without-cxx-binding</parameter></term>
+        <listitem>
+          <para>This optional switch causes the
+          <filename class="libraryfile">libncurses++w.a</filename> library
+          not to be built. Nothing in LFS and BLFS uses this library.</para>
+        </listitem>
+      </varlistentry>
+      -->
 
+    </variablelist>
+
+    <para>Compile the package:</para>
+
 <screen><userinput>make</userinput></screen>
 
-<para>This package does not come with a test suite.</para>
+    <para>This package does not come with a test suite.</para>
 
-<para>Install the package:</para>
+    <para>Install the package:</para>
 
 <screen><userinput>make install</userinput></screen>
 
-<para>Give the Ncurses libraries execute permissions:</para>
+    <para>Give the Ncurses libraries execute permissions:</para>
 
 <screen><userinput>chmod -v 755 /usr/lib/*.&ncurses-version;</userinput></screen>
 
-<para>Fix a library that should not be executable:</para>
+    <para>Fix a library that should not be executable:</para>
 
 <screen><userinput>chmod -v 644 /usr/lib/libncurses++w.a</userinput></screen>
 
-<para>Move the libraries to the <filename class="directory">/lib</filename> directory,
-where they are expected to reside:</para>
+    <para>Move the libraries to the <filename class="directory">/lib</filename> directory,
+    where they are expected to reside:</para>
 
 <screen><userinput>mv -v /usr/lib/libncursesw.so.5* /lib</userinput></screen>
 
-<para>Because the libraries have been moved, one symlink points to
-a non-existent file. Recreate it:</para>
+    <para>Because the libraries have been moved, one symlink points to
+    a non-existent file. Recreate it:</para>
 
 <screen><userinput>ln -sfv ../../lib/libncursesw.so.5 /usr/lib/libncursesw.so</userinput></screen>
 
-<para>Many applications still expect the linker to be able to find
-non-wide-character Ncurses libraries. Trick such applications into linking with
-wide-character libraries by means of symlinks and linker scripts:</para>
+    <para>Many applications still expect the linker to be able to find
+    non-wide-character Ncurses libraries. Trick such applications into linking with
+    wide-character libraries by means of symlinks and linker scripts:</para>
 
 <screen><userinput>for lib in curses ncurses form panel menu ; do \
-	rm -vf /usr/lib/lib${lib}.so ; \
-	echo "INPUT(-l${lib}w)" >/usr/lib/lib${lib}.so ; \
-	ln -sfv lib${lib}w.a /usr/lib/lib${lib}.a ; \
+    rm -vf /usr/lib/lib${lib}.so ; \
+    echo "INPUT(-l${lib}w)" >/usr/lib/lib${lib}.so ; \
+    ln -sfv lib${lib}w.a /usr/lib/lib${lib}.a ; \
 done &&
 ln -sfv libncurses++w.a /usr/lib/libncurses++.a</userinput></screen>
 
-<para>Finally, make sure that old applications that look for
-<filename class="libraryfile">-lcurses</filename> at build time are still
-buildable:</para>
+    <para>Finally, make sure that old applications that look for
+    <filename class="libraryfile">-lcurses</filename> at build time are still
+    buildable:</para>
 
 <screen><userinput>echo "INPUT(-lncursesw)" >/usr/lib/libcursesw.so &&
 ln -sfv libncurses.so /usr/lib/libcurses.so &&
 ln -sfv libncursesw.a /usr/lib/libcursesw.a &&
 ln -sfv libncurses.a /usr/lib/libcurses.a</userinput></screen>
 
-<note><para>The instructions above don't create non-wide-character Ncurses
-libraries since no package installed by compiling from sources would link
-against them at runtime.
-If you must have such libraries because of some binary-only application,
-build them with the following commands:</para>
+    <note>
+      <para>The instructions above don't create non-wide-character Ncurses
+      libraries since no package installed by compiling from sources would
+      link against them at runtime. If you must have such libraries because
+      of some binary-only application, build them with the following
+      commands:</para>
+
 <screen role="nodump"><userinput>make distclean &&
 ./configure --prefix=/usr --with-shared --without-normal \
-	--without-debug --without-cxx-binding &&
+  --without-debug --without-cxx-binding &&
 make sources libs &&
 cp -av lib/lib*.so.5* /usr/lib</userinput></screen>
-</note>
-</sect2>
+    </note>
 
+  </sect2>
 
-<sect2 id="contents-ncurses" role="content"><title>Contents of Ncurses</title>
+  <sect2 id="contents-ncurses" role="content">
+    <title>Contents of Ncurses</title>
 
-<segmentedlist>
-<segtitle>Installed programs</segtitle>
-<segtitle>Installed libraries</segtitle>
-<seglistitem><seg>captoinfo (link to tic), clear, infocmp, infotocap (link to tic), 
-reset (link to tset), tack, tic, toe, tput, and tset</seg>
-<seg>libcursesw.[a,so] (symlink and linker script to libncursesw.[a,so]),
-libformw.[a,so], libmenuw.[a,so], 
-libncurses++w.a, libncursesw.[a,so], libpanelw.[a,so] and their
-non-wide-character counterparts without "w" in the library names.</seg></seglistitem>
-</segmentedlist>
+    <segmentedlist>
+      <segtitle>Installed programs</segtitle>
+      <segtitle>Installed libraries</segtitle>
 
-<variablelist><bridgehead renderas="sect3">Short Descriptions</bridgehead>
-<?dbfo list-presentation="list"?>
-<?dbhtml list-presentation="table"?>
+      <seglistitem>
+        <seg>captoinfo (link to tic), clear, infocmp, infotocap (link to tic),
+        reset (link to tset), tack, tic, toe, tput, and tset</seg>
+        <seg>libcursesw.[a,so] (symlink and linker script to libncursesw.[a,so]),
+        libformw.[a,so], libmenuw.[a,so], libncurses++w.a, libncursesw.[a,so],
+        libpanelw.[a,so] and their non-wide-character counterparts without "w"
+        in the library names.</seg>
+      </seglistitem>
+    </segmentedlist>
 
-<varlistentry id="captoinfo">
-<term><command>captoinfo</command></term>
-<listitem>
-<para>Converts a termcap description into a terminfo description</para>
-<indexterm zone="ch-system-ncurses captoinfo"><primary sortas="b-captoinfo">captoinfo</primary></indexterm>
-</listitem>
-</varlistentry>
+    <variablelist>
+      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
+      <?dbfo list-presentation="list"?>
+      <?dbhtml list-presentation="table"?>
 
-<varlistentry id="clear">
-<term><command>clear</command></term>
-<listitem>
-<para>Clears the screen, if possible</para>
-<indexterm zone="ch-system-ncurses clear"><primary sortas="b-clear">clear</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="captoinfo">
+        <term><command>captoinfo</command></term>
+        <listitem>
+          <para>Converts a termcap description into a terminfo description</para>
+          <indexterm zone="ch-system-ncurses captoinfo">
+            <primary sortas="b-captoinfo">captoinfo</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="infocmp">
-<term><command>infocmp</command></term>
-<listitem>
-<para>Compares or prints out terminfo descriptions</para>
-<indexterm zone="ch-system-ncurses infocmp"><primary sortas="b-infocmp">infocmp</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="clear">
+        <term><command>clear</command></term>
+        <listitem>
+          <para>Clears the screen, if possible</para>
+          <indexterm zone="ch-system-ncurses clear">
+            <primary sortas="b-clear">clear</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="infotocap">
-<term><command>infotocap</command></term>
-<listitem>
-<para>Converts a terminfo description into a termcap description</para>
-<indexterm zone="ch-system-ncurses infotocap"><primary sortas="b-infotocap">infotocap</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="infocmp">
+        <term><command>infocmp</command></term>
+        <listitem>
+          <para>Compares or prints out terminfo descriptions</para>
+          <indexterm zone="ch-system-ncurses infocmp">
+            <primary sortas="b-infocmp">infocmp</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="reset">
-<term><command>reset</command></term>
-<listitem>
-<para>Reinitializes a terminal to its default values</para>
-<indexterm zone="ch-system-ncurses reset"><primary sortas="b-reset">reset</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="infotocap">
+        <term><command>infotocap</command></term>
+        <listitem>
+          <para>Converts a terminfo description into a termcap description</para>
+          <indexterm zone="ch-system-ncurses infotocap">
+            <primary sortas="b-infotocap">infotocap</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="tack">
-<term><command>tack</command></term>
-<listitem>
-<para>The terminfo action checker; it is mainly used to test the
-accuracy of an entry in the terminfo database</para>
-<indexterm zone="ch-system-ncurses tack"><primary sortas="b-tack">tack</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="reset">
+        <term><command>reset</command></term>
+        <listitem>
+          <para>Reinitializes a terminal to its default values</para>
+          <indexterm zone="ch-system-ncurses reset">
+            <primary sortas="b-reset">reset</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="tic">
-<term><command>tic</command></term>
-<listitem>
-<para>The terminfo entry-description compiler that translates a
-terminfo file from source format into the binary format needed for the
-ncurses library routines. A terminfo file contains information on the
-capabilities of a certain terminal</para>
-<indexterm zone="ch-system-ncurses tic"><primary sortas="b-tic">tic</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="tack">
+        <term><command>tack</command></term>
+        <listitem>
+          <para>The terminfo action checker; it is mainly used to test the
+          accuracy of an entry in the terminfo database</para>
+          <indexterm zone="ch-system-ncurses tack">
+            <primary sortas="b-tack">tack</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="toe">
-<term><command>toe</command></term>
-<listitem>
-<para>Lists all available terminal types, giving the primary name and
-description for each</para>
-<indexterm zone="ch-system-ncurses toe"><primary sortas="b-toe">toe</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="tic">
+        <term><command>tic</command></term>
+        <listitem>
+          <para>The terminfo entry-description compiler that translates a
+          terminfo file from source format into the binary format needed for the
+          ncurses library routines. A terminfo file contains information on the
+          capabilities of a certain terminal</para>
+          <indexterm zone="ch-system-ncurses tic">
+            <primary sortas="b-tic">tic</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="tput">
-<term><command>tput</command></term>
-<listitem>
-<para>Makes the values of terminal-dependent capabilities available to
-the shell; it can also be used to reset or initialize a terminal or
-report its long name</para>
-<indexterm zone="ch-system-ncurses tput"><primary sortas="b-tput">tput</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="toe">
+        <term><command>toe</command></term>
+        <listitem>
+          <para>Lists all available terminal types, giving the primary name and
+          description for each</para>
+          <indexterm zone="ch-system-ncurses toe">
+            <primary sortas="b-toe">toe</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="tset">
-<term><command>tset</command></term>
-<listitem>
-<para>Can be used to initialize terminals</para>
-<indexterm zone="ch-system-ncurses tset"><primary sortas="b-tset">tset</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="tput">
+        <term><command>tput</command></term>
+        <listitem>
+          <para>Makes the values of terminal-dependent capabilities available to
+          the shell; it can also be used to reset or initialize a terminal or
+          report its long name</para>
+          <indexterm zone="ch-system-ncurses tput">
+            <primary sortas="b-tput">tput</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="libcurses">
-<term><filename class="libraryfile">libcurses</filename></term>
-<listitem>
-<para>A link to <filename>libncurses</filename></para>
-<indexterm zone="ch-system-ncurses libcurses"><primary sortas="c-libcurses">libcurses</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="tset">
+        <term><command>tset</command></term>
+        <listitem>
+          <para>Can be used to initialize terminals</para>
+          <indexterm zone="ch-system-ncurses tset">
+            <primary sortas="b-tset">tset</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="libncurses">
-<term><filename class="libraryfile">libncurses</filename></term>
-<listitem>
-<para>Contains functions to display text in many complex ways on a
-terminal screen; a good example of the use of these functions is the
-menu displayed during the kernel's <command>make menuconfig</command></para>
-<indexterm zone="ch-system-ncurses libncurses"><primary sortas="c-libncurses">libncurses</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="libcurses">
+        <term><filename class="libraryfile">libcurses</filename></term>
+        <listitem>
+          <para>A link to <filename>libncurses</filename></para>
+          <indexterm zone="ch-system-ncurses libcurses">
+            <primary sortas="c-libcurses">libcurses</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="libform">
-<term><filename class="libraryfile">libform</filename></term>
-<listitem>
-<para>Contains functions to implement forms</para>
-<indexterm zone="ch-system-ncurses libform"><primary sortas="c-libform">libform</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="libncurses">
+        <term><filename class="libraryfile">libncurses</filename></term>
+        <listitem>
+          <para>Contains functions to display text in many complex ways on a
+          terminal screen; a good example of the use of these functions is the
+          menu displayed during the kernel's <command>make
+          menuconfig</command></para>
+          <indexterm zone="ch-system-ncurses libncurses">
+            <primary sortas="c-libncurses">libncurses</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="libmenu">
-<term><filename class="libraryfile">libmenu</filename></term>
-<listitem>
-<para>Contains functions to implement menus</para>
-<indexterm zone="ch-system-ncurses libmenu"><primary sortas="c-libmenu">libmenu</primary></indexterm>
-</listitem>
-</varlistentry>
+      <varlistentry id="libform">
+        <term><filename class="libraryfile">libform</filename></term>
+        <listitem>
+          <para>Contains functions to implement forms</para>
+          <indexterm zone="ch-system-ncurses libform">
+            <primary sortas="c-libform">libform</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-<varlistentry id="libpanel">
-<term><filename class="libraryfile">libpanel</filename></term>
-<listitem>
-<para>Contains functions to implement panels</para>
-<indexterm zone="ch-system-ncurses libpanel"><primary sortas="c-libpanel">libpanel</primary></indexterm>
-</listitem>
-</varlistentry>
-</variablelist>
+      <varlistentry id="libmenu">
+        <term><filename class="libraryfile">libmenu</filename></term>
+        <listitem>
+          <para>Contains functions to implement menus</para>
+          <indexterm zone="ch-system-ncurses libmenu">
+            <primary sortas="c-libmenu">libmenu</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-</sect2>
+      <varlistentry id="libpanel">
+        <term><filename class="libraryfile">libpanel</filename></term>
+        <listitem>
+          <para>Contains functions to implement panels</para>
+          <indexterm zone="ch-system-ncurses libpanel">
+            <primary sortas="c-libpanel">libpanel</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
+    </variablelist>
+
+  </sect2>
+
 </sect1>

Modified: branches/alphabetical/BOOK/chapter06/patch.xml
===================================================================
--- branches/alphabetical/BOOK/chapter06/patch.xml	2006-02-06 20:52:27 UTC (rev 7359)
+++ branches/alphabetical/BOOK/chapter06/patch.xml	2006-02-06 20:57:27 UTC (rev 7360)
@@ -1,76 +1,97 @@
 <?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN" "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
+  "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../general.ent">
   %general-entities;
 ]>
+
 <sect1 id="ch-system-patch" role="wrap">
-<title>Patch-&patch-version;</title>
-<?dbhtml filename="patch.html"?>
+  <?dbhtml filename="patch.html"?>
 
-<indexterm zone="ch-system-patch"><primary sortas="a-Patch">Patch</primary></indexterm>
+  <title>Patch-&patch-version;</title>
 
-<sect2 role="package"><title/>
-<para>The Patch package contains a program for modifying or creating files by
-applying a <quote>patch</quote> file typically created by the
-<command>diff</command> program.</para>
+  <indexterm zone="ch-system-patch">
+    <primary sortas="a-Patch">Patch</primary>
+  </indexterm>
 
-<segmentedlist>
-<segtitle>&buildtime;</segtitle>
-<segtitle>&diskspace;</segtitle>
-<seglistitem><seg>0.1 SBU</seg><seg>1.5 MB</seg></seglistitem>
-</segmentedlist>
+  <sect2 role="package">
+    <title/>
 
-<segmentedlist>
-<segtitle>&dependencies;</segtitle>
-<seglistitem><seg>Bash, Binutils, Coreutils, Diffutils,
-GCC, Glibc, Grep, Make, and Sed</seg></seglistitem>
-</segmentedlist>
-</sect2>
+    <para>The Patch package contains a program for modifying or creating files
+    by applying a <quote>patch</quote> file typically created by the
+    <command>diff</command> program.</para>
 
-<sect2 role="installation">
-<title>Installation of Patch</title>
+    <segmentedlist>
+      <segtitle>&buildtime;</segtitle>
+      <segtitle>&diskspace;</segtitle>
 
-<para>Prepare Patch for compilation.</para>
+      <seglistitem>
+        <seg>0.1 SBU</seg>
+        <seg>1.5 MB</seg>
+      </seglistitem>
+    </segmentedlist>
 
+    <segmentedlist>
+      <segtitle>&dependencies;</segtitle>
+
+      <seglistitem>
+        <seg>Bash, Binutils, Coreutils, Diffutils, GCC, Glibc, Grep, Make,
+        and Sed</seg>
+      </seglistitem>
+    </segmentedlist>
+
+  </sect2>
+
+  <sect2 role="installation">
+    <title>Installation of Patch</title>
+
+    <para>Prepare Patch for compilation.</para>
+
 <screen><userinput>./configure --prefix=/usr</userinput></screen>
 
-<para>Compile the package:</para>
+    <para>Compile the package:</para>
 
 <screen><userinput>make</userinput></screen>
 
-<para>This package does not come with a test suite.</para>
+    <para>This package does not come with a test suite.</para>
 
-<para>Install the package:</para>
+    <para>Install the package:</para>
 
 <screen><userinput>make install</userinput></screen>
 
-</sect2>
+  </sect2>
 
+  <sect2 id="contents-patch" role="content">
+    <title>Contents of Patch</title>
 
-<sect2 id="contents-patch" role="content"><title>Contents of Patch</title>
+    <segmentedlist>
+      <segtitle>Installed program</segtitle>
 
-<segmentedlist>
-<segtitle>Installed program</segtitle>
-<seglistitem><seg>patch</seg></seglistitem>
-</segmentedlist>
+      <seglistitem>
+        <seg>patch</seg>
+      </seglistitem>
+    </segmentedlist>
 
-<variablelist><bridgehead renderas="sect3">Short Descriptions</bridgehead>
-<?dbfo list-presentation="list"?>
-<?dbhtml list-presentation="table"?>
+    <variablelist>
+      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
+      <?dbfo list-presentation="list"?>
+      <?dbhtml list-presentation="table"?>
 
-<varlistentry id="patch">
-<term><command>patch</command></term>
-<listitem>
-<para>Modifies files according to a patch file. A patch file is normally
-a difference listing created with the <command>diff</command> program. By applying
-these differences to the original files, <command>patch</command> creates the patched
-versions.</para>
-<indexterm zone="ch-system-patch patch"><primary sortas="b-patch">patch</primary></indexterm>
-</listitem>
-</varlistentry>
-</variablelist>
+      <varlistentry id="patch">
+        <term><command>patch</command></term>
+        <listitem>
+          <para>Modifies files according to a patch file. A patch file is
+          normally a difference listing created with the <command>diff</command>
+          program. By applying these differences to the original files,
+          <command>patch</command> creates the patched versions.</para>
+          <indexterm zone="ch-system-patch patch">
+            <primary sortas="b-patch">patch</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
 
-</sect2>
+    </variablelist>
 
+  </sect2>
+
 </sect1>
-

Modified: branches/alphabetical/BOOK/general.ent
===================================================================
--- branches/alphabetical/BOOK/general.ent	2006-02-06 20:52:27 UTC (rev 7359)
+++ branches/alphabetical/BOOK/general.ent	2006-02-06 20:57:27 UTC (rev 7360)
@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="ISO-8859-1"?>
-<!ENTITY version "ALPHABETICAL-20060204">
-<!ENTITY releasedate "Febraury 4, 2006">
+<!ENTITY version "ALPHABETICAL-20060206">
+<!ENTITY releasedate "Febraury 6, 2006">
 <!ENTITY milestone "6.2">
 <!ENTITY generic-version "development"> <!-- Use "development", "testing", or "x.y[-pre{x}]" -->
 

Modified: branches/alphabetical/BOOK/stylesheets/lfs.css
===================================================================
--- branches/alphabetical/BOOK/stylesheets/lfs.css	2006-02-06 20:52:27 UTC (rev 7359)
+++ branches/alphabetical/BOOK/stylesheets/lfs.css	2006-02-06 20:57:27 UTC (rev 7360)
@@ -255,6 +255,22 @@
   margin-left: 1em;
 }
 
+/*table */
+
+div.table {
+  text-align: center;
+}
+
+div.table table {
+  margin-left: auto;
+  margin-right: auto;
+  text-align: center;
+}
+
+div.table table th, div.table table td {
+  padding: 0.2em 2em 0.2em 2em;
+}
+
 /* Indented blocks */
 p, ul, dl, code, blockquote {
   padding-left: 1em;




More information about the lfs-book mailing list