Pb with speedtouch modem install

Polyvore nospam.polyvore at yahoo.fr
Mon Apr 12 03:45:18 PDT 2004


Hi all,

I've just install my LFS 5.0 on my PC (celeron 333 with 160 Mo RAM) from a
knoppix distro which is installer on my hard disk.

With knoppix my Alcatel Speedtouch Modem works with no problem but under
LFS i can't connect to the web :-(. I think i have bad options for my
kernel compilation.

Here are the things i've done after the LFS install : 
- install of pppd 2.4.1
- install of speedtouch driver 1.2
(http://speedtouch.sourceforge.net)
- copy of the ppp config file from knoppix to LFS - compil of a new kernel
2.4.22 with these options :

"Network device support"
<*> PPP (point-to-point protocol) support 
<*>   PPP support for async serial ports
<*>   PPP support for sync tty ports
<*>   PPP Deflate compression
<*>   PPP BSD-Compress compression

"USB Support"
<*>   UHCI (Intel PIIX4, VIA, ...) support
<*>   OHCI (Compaq, iMacs,OPTi, SiS, ALi, ...) support

"Character devices"
[*] Non-standard serial port support
<*>   HDLC line discipline support
[*] Unix98 PTY support

- I think my USB is UHCI because lspci | grep -i give me (under knoppix):
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 04)

- i'm using the same firmware under knoppix, LFS and also windows

When i try to connect :
- it's ok for modem_run, logs tell me :

modem_run version 1.2 started by root uid 0
Found SpeedTouch USB modem
Modem revision: 0000
Best offset   1776 with probability 100%
Best offset    983 with probability 100%
Firmware info (CRC:0xd80bf9f7, Size:991, Checked: Yes, Alcatel/Thomson Boot block (old))
Best offset   2772 with probability 100%
Best offset 528730 with probability 100%
Firmware info (CRC:0x99cc1c1a,Size:528738, Checked: Yes, 1.4.2 - Win32(2.0.500))
BLOCK1 :    991 bytes   uploaded : OK
BLOCK2 :    511 bytes downloaded : OK
BLOCK3 : 528738 bytes   uploaded : OK
BLOCK4 :    511 bytes downloaded : OK
Modem reference : 3EC18607CAAB09
[monitoring report] ADSL link went up 
ADSL synchronization has been obtained 
ADSL line is up (640 kbit/s down | 160 kbit/s up)

- the problem is with the call to "pppd call adsl" the logs are :

pppd 2.4.1 started by root, uid 0
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/pts/0
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 125), status= 0x7f00
Modem hangup
Connection terminated.
using channel 2
Couldn't attach to channel 2: No such device or address
Couldn't get channel number: Input/output error
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/pts/0
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 129), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 128), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 130), status
= 0x7f00
Modem hangup
Connection terminated.
using channel 4
Couldn't attach to channel 4: No such device or address
using channel 5
Couldn't attach to channel 5: No such device or address Couldn't get
channel number: Input/output error
using channel 6 
Couldn't attach to channel 6: No such device or address 
using channel 7 
Couldn't attach to channel 7: No such device or address
using channel 8
Couldn't attach to channel 8: No such device or address 
using channel 9
Couldn't attach to channel 9: No such device or address 
using channel 10
Couldn't attach to channel 10: No such device or address 
using channel 11
Couldn't attach to channel 11: No such device or address 
using channel 12
Couldn't attach to channel 12: No such device or address 
using channel 13
Couldn't attach to channel 13: No such device or address 
using channel 14
Couldn't attach to channel 14: No such device or address 
using channel 15
Couldn't attach to channel 15: No such device or address 
using channel 16
Couldn't attach to channel 16: No such device or address 
using channel 17
Couldn't attach to channel 17: No such device or address 
using channel 18
Couldn't attach to channel 18: No such device or address
Couldn't get channel number: Input/output error 
using channel 19 
Couldn't attach to channel 19: No such device or address
using channel 20
Couldn't attach to channel 20: No such device or address
using channel 21
Couldn't attach to channel 21: No such device or address 
using channel 22
Using interface ppp0
Connect: ppp0 <--> /dev/pts/0
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 152), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 151), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 150), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 149), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 148), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 147), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 146), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 145), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 144), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 143), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 142), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 141), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 140), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 139), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 138), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 137), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 136), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 135), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 134), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 133), status
= 0x7f00
Script /usr/sbin/pppoa3 -m 1 -c -vpi 8 -vci 35 finished (pid 153), status
= 0x7f00
Modem hangup
Connection terminated.
Exit.

I've read many tutorials and compil many kernel with different options but
i've alway "modem hangup". Have ever had this problem or do you see any
bad thing i had done ?

Thank you.


=======
remove nospam. to reply directly



More information about the blfs-support mailing list