[blfs-book] [BLFS Trac] #6696: sg3_utils-1.41

BLFS Trac trac at linuxfromscratch.org
Mon Jul 13 17:06:49 PDT 2015


#6696: sg3_utils-1.41
-------------------------+-----------------------
 Reporter:  fo           |       Owner:  renodr
     Type:  enhancement  |      Status:  assigned
 Priority:  normal       |   Milestone:  7.8
Component:  BOOK         |     Version:  SVN
 Severity:  normal       |  Resolution:
 Keywords:               |
-------------------------+-----------------------
Description changed by renodr:

Old description:

> [http://sg.danny.cz/sg/p/sg3_utils-1.41.tar.xz]
>
> [https://github.com/hreinecke/sg3_utils/blob/master/ChangeLog]
>
> and
>
> [https://raw.githubusercontent.com/hreinecke/sg3_utils/master/ChangeLog]
>
> {{{
> Changelog for sg3_utils-1.41 [20150119] [svn: r631]
>   - sg_zone: new utility for open, close and finish
>     zone commands introduced in zbc-r02
>   - sg_rep_zones and sg_reset_wp: change opcodes as
>     indicated in zbc-r02
>   - sg_read_buffer: add READ BUFFER(16) support (spc5r02)
>   - sg_logs: add --enumerate and acronyms
>     - allow decode from hex or binary in file
>     - decode environmental reporting + limits lpages
>   - sg_lib interface: add sg_lib_pdt_decay(), TPROTO_PCIE
>     plus support for zoning service actions
>   - sg_inq+sg_vpd: fix SCSI name string decoding in
>     device identification VPD page (0x83)
>     - increase sanity on Unit Serial number VPD page
>   - sg_inq: improve NAA handling in dev_id VPD page
>     - update version descriptor list to 20141221
>   - sg_vpd: add atomic boundary values (sbc4r04)
>     - block limits VPD page: fix unmap granularity
>       alignment value; spc5r02 additions
>   - sg_readcap: add support for ZBC's rc_basis field
>   - sg_senddiag: fix bug with --raw option
>   - sg_ses: enclosure element: add failure and warning
>     acronyms, fix warning indication output
>     - additional element status dpage: add PCIe/NVMe
>   - rescan-scsi-bus.sh: add --issue-lip-wait option and
>     improve error handling
>   - sg_modes: make '-HHH' output suitable as input to
>     'sdparm --inhex='
>   - scsi_logging_level: replace use of tr command
>   - sg_lib_data: sync asc/ascq codes with T10 20150103
> }}}

New description:

 [http://sg.danny.cz/sg/p/sg3_utils-1.41.tar.xz]

 [https://github.com/hreinecke/sg3_utils/blob/master/ChangeLog]

 and

 [https://raw.githubusercontent.com/hreinecke/sg3_utils/master/ChangeLog]

 MD5: 79c8e3c0b2e4bad7dcba3e1ab090f3b4


 {{{
 Changelog for sg3_utils-1.41 [20150119] [svn: r631]
   - sg_zone: new utility for open, close and finish
     zone commands introduced in zbc-r02
   - sg_rep_zones and sg_reset_wp: change opcodes as
     indicated in zbc-r02
   - sg_read_buffer: add READ BUFFER(16) support (spc5r02)
   - sg_logs: add --enumerate and acronyms
     - allow decode from hex or binary in file
     - decode environmental reporting + limits lpages
   - sg_lib interface: add sg_lib_pdt_decay(), TPROTO_PCIE
     plus support for zoning service actions
   - sg_inq+sg_vpd: fix SCSI name string decoding in
     device identification VPD page (0x83)
     - increase sanity on Unit Serial number VPD page
   - sg_inq: improve NAA handling in dev_id VPD page
     - update version descriptor list to 20141221
   - sg_vpd: add atomic boundary values (sbc4r04)
     - block limits VPD page: fix unmap granularity
       alignment value; spc5r02 additions
   - sg_readcap: add support for ZBC's rc_basis field
   - sg_senddiag: fix bug with --raw option
   - sg_ses: enclosure element: add failure and warning
     acronyms, fix warning indication output
     - additional element status dpage: add PCIe/NVMe
   - rescan-scsi-bus.sh: add --issue-lip-wait option and
     improve error handling
   - sg_modes: make '-HHH' output suitable as input to
     'sdparm --inhex='
   - scsi_logging_level: replace use of tr command
   - sg_lib_data: sync asc/ascq codes with T10 20150103
 }}}

--

--
Ticket URL: <http://wiki.linuxfromscratch.org/blfs/ticket/6696#comment:2>
BLFS Trac <http://wiki.linuxfromscratch.org/blfs>
Beyond Linux From Scratch


More information about the blfs-book mailing list